- 05 Jan, 2022 1 commit
-
-
AngeloGioacchino Del Regno authored
Entering suspend while the display attached to this bridge is still on makes the resume sequence to resume the bridge first, display last: when this happens, we get a timeout while resuming the bridge, as its MCU will get stuck due to the display being unpowered. On the other hand, on mt8173-elm, closing the lid makes the display to get powered off first, bridge last, so at resume time the sequence is swapped (compared to the first example) and everything just works as expected. Add a stateless device link to the DRM device that this bridge belongs to, ensuring a correct resume sequence and solving the unability to correctly resume bridge operation in the first mentioned example. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220105090802.73564-1-angelogioacchino.delregno@collabora.comReviewed-by:
-
- 04 Jan, 2022 12 commits
-
-
Jagan Teki authored
Get the display mode settings via mode_set bridge function instead of explicitly de-reference. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
-
Jagan Teki authored
Some display panels would come up with a non-DSI output, those can have an option to connect the DSI host by means of interface bridge converter. This DSI to non-DSI interface bridge converter would requires DSI Host to handle drm bridge functionalities in order to DSI Host to Interface bridge. This patch convert the existing to a drm bridge driver with a built-in encoder support for compatibility with existing component drivers. Signed-off-by:
-
Miaoqian Lin authored
Since i2c_new_client_device() function return error pointers. The i2c_new_dummy_device() function does not return NULL, It returns error pointers too. Using IS_ERR() to check the return value to fix this. Fixes: 8bdfc5da("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Signed-off-by:
-
Xin Ji authored
As GPIO probe function "devm_gpiod_get_optional()" may return error code, driver should identify GPIO desc as NULL to avoid crash. Acked-by:
Tzung-Bi Shih <tzungbi@google.com> Signed-off-by:
Xin Ji <xji@analogixsemi.com> Signed-off-by:
-
Yannick Fertre authored
Add support of new hardware version 0x40100. Signed-off-by:
Yannick Fertre <yannick.fertre@foss.st.com> Reviewed-by:
Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com> Tested-by:
Philippe Cornu <philippe.cornu@foss.st.com> Signed-off-by:
-
Yannick Fertre authored
In case of using simplefb or another conflicting framebuffer, call drm_aperture_remove_framebuffers() to remove memory allocated. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
-
Miaoqian Lin authored
rc_dev is allocated by rc_allocate_device(), and doesn't assigned to ctx->rc_dev before calling rc_free_device(ctx->rc_dev). So it should call rc_free_device(rc_dev); Fixes: e25f1f7c ("drm/bridge/sii8620: add remote control support") Signed-off-by:
-
Jagan Teki authored
Get the display mode settings via mode_set bridge function instead of explicitly de-reference. Signed-off-by:
-
Jagan Teki authored
Replace atomic version of the pre_enable/enable/post_disable operations to continue the transition to the atomic API. Also added default drm atomic operations for duplicate, destroy and reset state API's in order to have smooth transition on atomic API's. Tested on Allwinner R16/R40 DSI. Signed-off-by:
-
Antonio Borneo authored
The dsi has several constraints on the video modes it can support, mainly due to the frequencies that can be generated by the PLL integrated in the DSI device. Verify that the required HS clock can be generated by the PLL. The dsi clock from the dsi PLL and the ltdc pixel clock are asynchronous. The dsi needs to return in LP mode during HFP or HBP to re-synchronize at each video line. Verify that the duration of HFP and HBP allows the dsi to enter in LP mode. Signed-off-by:
Antonio Borneo <antonio.borneo@foss.st.com> Acked-by:
-
Antonio Borneo authored
To evaluate the validity of a video mode, some additional internal value has to be passed to the platform implementation. Extend the prototype of mode_valid(). Signed-off-by:
-
Antonio Borneo authored
There is no need to re-compute the dsi lane capability because it only depends on dsi hw version. Since dsi hw version is detected at probe(), move there also the assignment of dsi lane capability. Signed-off-by:
-
- 03 Jan, 2022 3 commits
-
-
Martin Blumenstingl authored
When afbcd.ops->init fails we need to free the struct drm_device. Also all errors which come after afbcd.ops->init was successful need to exit the AFBCD, just like meson_drv_unbind() does. Fixes: d1b5e41e ("drm/meson: Add AFBCD module driver") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Martin Blumenstingl authored
Use this to simplify the driver shutdown. It will also come handy when fixing the error handling in meson_drv_bind_master(). Signed-off-by:
-
Christophe JAILLET authored
sn65dsi83_parse_dt() takes a reference on 'ctx->host_node' that must be released in the error handling path of this function and of the probe. This is only done in the remove function up to now. Fixes: ceb515ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
- 22 Dec, 2021 1 commit
-
-
Ville Syrjälä authored
Replace the slightly odd "#define <function> NULL" thing with a standard static inline stub. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211221193754.12287-2-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com>
-
- 21 Dec, 2021 4 commits
-
-
Alexander Stein authored
VCC needs to be enabled before releasing the enable GPIO. Reviewed-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by:
-
Alexander Stein authored
Add a VCC regulator which needs to be enabled before the EN pin is released. Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
-
Alexander Stein authored
The enable signal may not be controllable by the kernel. Make it optional. This is a similar to commit bbda1704 ("drm/bridge: ti-sn65dsi86: Make enable GPIO optional") Reviewed-by:
-
Laurent Pinchart authored
The SN65DSI8x EN signal may be tied to VCC, or otherwise controlled by means not available to the kernel. Make the GPIO optional. Signed-off-by:
-
- 20 Dec, 2021 2 commits
-
-
Claudio Suarez authored
The patch d1af5cd86997 ("drm: get rid of DRM_DEBUG_* log calls in drm core, files drm_a*.c") fails when the drm_device cannot be found in the parameter plane_state->crtc. Fix it using plane_state->plane. Reported-by:kernel test robot <oliver.sang@intel.com> Fixes: 6e22dc35 ("drm: get rid of DRM_DEBUG_* log calls in drm core, files drm_a*.c") Signed-off-by:
Claudio Suarez <cssk@net-c.es> [danvet: fix Fixes: line] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/YaiXEARd8z2C463h@gineta.localdomain
-
Claudio Suarez authored
igt_check_plane_state test crashes in drm_atomic_helper_check_plane_state when trying to de-reference drm_plane_state->plane->dev due to the lack of a struct drm_plane in the mock struct drm_plane_state. Since drm_plane_state always should contain a plane, the mock also needs a plane to be the test more robust and realistic. Add it. Signed-off-by:
-
- 16 Dec, 2021 17 commits
-
-
Ben Skeggs authored
eDP 1.4 adds a table of link rates supported by the sink to DPCD, as well as a LINK_RATE_SET register to select between the entries in it. If present, we will use this data to generate our internal link rate table rather than using the standard list based on MAX_LINK_RATE. Some recent laptops report MAX_LINK_RATE=0, and require this support. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Karol Herbst <kherbst@redhat.com> Link: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests/17
-
Ben Skeggs authored
Signed-off-by:
-
Ben Skeggs authored
Add support for Link-Training Tunable PHY Repeaters, required to support higher bit rates on longer cables, as well as USB-C on certain docks and laptops. Signed-off-by:
-
Ben Skeggs authored
Also use usleep_range() instead of [um]delay() to be a bit nicer. Signed-off-by:
-
Ben Skeggs authored
Required for HBR3 and LTTPR. Signed-off-by:
-
Ben Skeggs authored
Replaces the static list used during link training with a table built dynamically from the union of source and sink capabilities. Preparation for adding support for HBR3, LTTPR and eDP 1.4 link rates. Signed-off-by:
-
Ben Skeggs authored
TPS1/2/3 require scrambling to be disabled. The IED scripts on earlier boards used to handle this, but appear not to anymore. TPS4 support will also require scrambling to remain enabled. Signed-off-by:
-
Ben Skeggs authored
Signed-off-by:
-
Zack Rusin authored
vmw_user_bo_lookup can fail to lookup user buffers, especially because the buffer handles come from the userspace. The return value has to be checked before the buffers are put back. This was spotted by Dan's Smatch statick checker: drivers/gpu/drm/vmwgfx/vmwgfx_bo.c:574 vmw_user_bo_synccpu_release() error: uninitialized symbol 'vmw_bo'. Signed-off-by:Zack Rusin <zackr@vmware.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 8afa13a0 ("drm/vmwgfx: Implement DRIVER_GEM") Reviewed-by:
Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211215200224.3693345-1-zack@kde.org
-
Zack Rusin authored
Before the driver had screen targets support we had to disable explicit bringup of its infrastructure because it was breaking screen objects support. Since the implementation of screen targets landed there hasn't been a reason to explicitly disable it and the options were never used. Remove of all that unused code. Signed-off-by:
-
Zack Rusin authored
Old versions of the svga device used to export virtual vram, handling of which was optimized on top of transparent hugepages support. Only very old devices (OpenGL 2.1 support and earlier) used this code and at this point performance differences are negligible. Because the code requires very old hardware versions to run it has been largely untested and unused for a long time. Furthermore removal of the ttm hugepages support in: commit 0d979509 ("drm/ttm: remove ttm_bo_vm_insert_huge()") broke the coherency mode in vmwgfx when running with hugepages. Fixes: 0d979509 ("drm/ttm: remove ttm_bo_vm_insert_huge()") Signed-off-by:
Maaz Mombasawala <mombasawalam@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211215184147.3688785-2-zack@kde.org
-
Zack Rusin authored
On i386 size_t is of course 32bits and using long int throws warnings, trivially fix it by using the dedicated size_t format. This is enough to fix the following warning found by the kernel test robot: drivers/gpu/drm/vmwgfx/vmwgfx_gem.c: In function 'vmw_bo_print_info': >> drivers/gpu/drm/vmwgfx/vmwgfx_gem.c:230:33: warning: format '%ld' expects argument of type 'long int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Wformat=] 230 | seq_printf(m, "\t\t0x%08x: %12ld bytes %s, type = %s", | ~~~~^ | | | long int | %12d 231 | id, bo->base.base.size, placement, type); | ~~~~~~~~~~~~~~~~~~ | | Reported-by:kernel test robot <lkp@intel.com> Signed-off-by:
-
Paul Boddie authored
Add support for the LCD controller present on JZ4780 SoCs. This SoC uses 8-byte descriptors which extend the current 4-byte descriptors used for other Ingenic SoCs. Tested on MIPS Creator CI20 board. Signed-off-by:
Paul Boddie <paul@boddie.org.uk> Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/caf9e56b64b0717563e03172b30fa03736e92e15.1638470392.git.hns@goldelico.com
-
H. Nikolaus Schaller authored
This changes the way the regmap is allocated to prepare for the later addition of the JZ4780 which has more registers and bits than the others. Therefore we make the regmap as big as the reg property in the device tree tells. Suggested-by:
-
Xiang wangx authored
struct of_device_id should normally be const. Signed-off-by:
Xiang wangx <wangxiang@cdjrlc.com> Reviewed-by:
Jyri Sarha <jyri.sarha@iki.fi> Signed-off-by:
-
Thomas Zimmermann authored
Backmerging for v5.16-rc5. Resolves a conflict between drm-misc-next and drm-misc-fixes in the vc4 driver. Signed-off-by: -
Stephen Boyd authored
Set the maximum register to 0xff so we can dump the registers for this device in debugfs. Fixes: a095f15c ("drm/bridge: add support for sn65dsi86 bridge driver") Cc: Rob Clark <robdclark@chromium.org> Cc: Douglas Anderson <dianders@chromium.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
-
