- 24 Apr, 2014 32 commits
-
-
Rob Herring authored
In order to support earlycon on arm64, we need to enable earlycon fixmap support. Signed-off-by:
Rob Herring <robh@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rob Herring authored
Add earlycon support for the arm/arm64 semihosting debug serial interface. This allows enabling a debug console when early_params are processed. This is based on the arm64 earlyprintk smh support and is intended to replace it. Signed-off-by:
-
Rob Herring authored
Add earlycon support for the pl011 serial port. This allows enabling the pl011 for console when early_params are processed. This is based on the arm64 earlyprintk support and is intended to replace it. Signed-off-by:
-
Rob Herring authored
With the generic earlycon infrastructure in place, convert the 8250 early console to use it. Signed-off-by:
-
Rob Herring authored
This introduces generic earlycon infrastructure for serial devices based on the 8250 earlycon. This allows for supporting earlycon option with other serial devices. The earlycon output is enabled at the time early_params are processed. Only architectures that have fixmap support or have functional ioremap when early_params are processed are supported. This is the same restriction that the 8250 driver had. Signed-off-by:
-
Rob Herring authored
In preparation to support FIX_EARLYCON_MEM on other arches, make the option per arch. Signed-off-by:
-
Johannes Thumshirn authored
Add driver for MEN's 16z135 High Speed UART. The 16z135 is a memory mapped UART Core on an MCB FPGA and has 1024 byte deep FIFO buffers for the RX and TX path. It also has configurable FIFO fill level IRQs and data copied to and from the hardware has to be acknowledged. Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@men.de> Reviewed-by:
Alan Cox <gnomes@lxorguk.ukuu.org.uk> Signed-off-by:
-
Soren Brinkmann authored
Zynq's UART is Cadence IP. Make this visible in the prompt in kconfig and additional comments in the driver. This also renames functions and symbols, as far as possible without breaking user space API, to reflect the Cadence origin. This is achieved through simple search and replace: - s/XUARTPS/CDNS_UART/g - s/xuartps/cdns_uart/g The only exceptions are PORT_XUARTPS and the driver name, which stay as is, due to their exposure to user space. As well as the - no legacy - compatibility string 'xlnx,xuartps' Signed-off-by:
Soren Brinkmann <soren.brinkmann@xilinx.com> Tested-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Soren Brinkmann authored
A comment states, that, according to the data sheet, to enable interrupts the disable register should be written, but the enable register could be left untouched. And it suspsects a HW bug requiring to write both. Reviewing the data sheet, these statements seem wrong. Just as one would expect. Writing to the enable/disable register enables/disables interrupts. Hence the misleading comment and needless write to the disable register are removed from the enable sequence. Signed-off-by:
-
Soren Brinkmann authored
A lot of read-modify-write sequences used a one-line statement which nests a readl() within a writel(). Convert this into code sequences that make the three steps more obvious. Signed-off-by:
-
Soren Brinkmann authored
Print a warning if the clock notifier rejects a clock frequency change to facilitate debugging (see: http://thread.gmane.org/gmane.linux.ports.arm.kernel/304329/focus=304379) Signed-off-by:
-
Soren Brinkmann authored
This is all white space and comment clean up. Mostly reformatting comments. Signed-off-by:
-
Michal Simek authored
Register port numbers according to order in DT aliases. If aliases are not defined, order in DT is used. If aliases are defined, register port id based on that. This patch ensures proper ttyPS0/1 assignment. [soren]: Combined integer declarations in probe(), removed warning message if no alias is found. Signed-off-by:
-
Michal Simek authored
No functional changes. Signed-off-by:
-
Felipe Balbi authored
Fix the following Sparse warnings: drivers/tty/serial/omap-serial.c:1418:49: warning: incorrect \ type in argument 2 (different address spaces) drivers/tty/serial/omap-serial.c:1418:49: expected void const \ [noderef] <asn:1>*from drivers/tty/serial/omap-serial.c:1418:49: got struct serial_rs485 \ *<noident> drivers/tty/serial/omap-serial.c:1426:35: warning: incorrect \ type in argument 1 (different address spaces) drivers/tty/serial/omap-serial.c:1426:35: expected void [noderef] \ <asn:1>*to drivers/tty/serial/omap-serial.c:1426:35: got struct serial_rs485 \ *<noident> Reported-by:
Nishanth Menon <nm@ti.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Felipe Balbi authored
it wasn't used by anything, just remove it. Signed-off-by:
-
Felipe Balbi authored
nobody passes a DTR_gpio to this driver, so this code is not necessary. Signed-off-by:
-
Felipe Balbi authored
just using helper function to remove some duplicated code a bit. While at that, also move allocation of struct uart_omap_port higher in the code so that we return much earlier in case of no memory. Signed-off-by:
-
Felipe Balbi authored
this way we can remove one pointer declaration. Signed-off-by:
-
Felipe Balbi authored
cleanup only, no functional changes. Signed-off-by:
-
Felipe Balbi authored
this will make sure gpio gets freed automatically when this device is destroyed. Signed-off-by:
-
Felipe Balbi authored
per CodingStyle we should have those braces, no functional changes. Signed-off-by:
-
Felipe Balbi authored
UART IRQ Identification bitfield is 3 bits long (bits 3:1) but current mask only masks 2 bits. Fix it. Signed-off-by:
-
Felipe Balbi authored
This reverts commit 0324a821. That commit tried to fix a deadlock problem when using hci_ldisc, but it turns out the bug was in hci_ldsic all along where it was calling ->write() from within ->write_wakeup() callback. The problem is that ->write_wakeup() was called with port lock held and ->write() tried to grab the same port lock. Signed-off-by:
-
Felipe Balbi authored
LDISCs shouldn't call tty->ops->write() from within ->write_wakeup(). ->write_wakeup() is called with port lock taken and IRQs disabled, tty->ops->write() will try to acquire the same port lock and we will deadlock. Acked-by:
Marcel Holtmann <marcel@holtmann.org> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Reported-by:
Huang Shijie <b32955@freescale.com> Signed-off-by:
Andreas Bießmann <andreas@biessmann.de> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Huang Shijie authored
In the uart_handle_cts_change(), uart_write_wakeup() is called after we call @uart_port->ops->start_tx(). The Documentation/serial/driver tells us: ----------------------------------------------- start_tx(port) Start transmitting characters. Locking: port->lock taken. Interrupts: locally disabled. ----------------------------------------------- So when the uart_write_wakeup() is called, the port->lock is taken by the upper. See the following callstack: |_ uart_write_wakeup |_ tty_wakeup |_ ld->ops->write_wakeup With the port->lock held, we call the @write_wakeup. Some implemetation of the @write_wakeup does not notice that the port->lock is held, and it still tries to send data with uart_write() which will try to grab the prot->lock. A dead lock occurs, see the following log caught in the Bluetooth by uart: -------------------------------------------------------------------- BUG: spinlock lockup suspected on CPU#0, swapper/0/0 lock: 0xdc3f4410, .magic: dead4ead, .owner: swapper/0/0, .owner_cpu: 0 CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 3.10.17-16839-ge4a1bef #1320 [<80014cbc>] (unwind_backtrace+0x0/0x138) from [<8001251c>] (show_stack+0x10/0x14) [<8001251c>] (show_stack+0x10/0x14) from [<802816ac>] (do_raw_spin_lock+0x108/0x184) [<802816ac>] (do_raw_spin_lock+0x108/0x184) from [<806a22b0>] (_raw_spin_lock_irqsave+0x54/0x60) [<806a22b0>] (_raw_spin_lock_irqsave+0x54/0x60) from [<802f5754>] (uart_write+0x38/0xe0) [<802f5754>] (uart_write+0x38/0xe0) from [<80455270>] (hci_uart_tx_wakeup+0xa4/0x168) [<80455270>] (hci_uart_tx_wakeup+0xa4/0x168) from [<802dab18>] (tty_wakeup+0x50/0x5c) [<802dab18>] (tty_wakeup+0x50/0x5c) from [<802f81a4>] (imx_rtsint+0x50/0x80) [<802f81a4>] (imx_rtsint+0x50/0x80) from [<802f88f4>] (imx_int+0x158/0x17c) [<802f88f4>] (imx_int+0x158/0x17c) from [<8007abe0>] (handle_irq_event_percpu+0x50/0x194) [<8007abe0>] (handle_irq_event_percpu+0x50/0x194) from [<8007ad60>] (handle_irq_event+0x3c/0x5c) -------------------------------------------------------------------- This patch adds more limits to the @write_wakeup, the one who wants to implemet the @write_wakeup should follow the limits which avoid the deadlock. Signed-off-by:
-
Doug Anderson authored
In (efe2f29e kgdboc,kdb: Allow kdb to work on a non open console port) support was added to directly use the "write_char" functions when doing kdb over a non-open console port. This is great, but it ends up bypassing the normal code in uart_console_write() that adds a carriage return before any newlines. There appears to have been a trend to add this support directly in some console driver's poll_put_char() functions. This had a few side effects, including: - In this case we were doing LFCR, not CRLF. This was fixed in uart_console_write() back in (d358788f [SERIAL] kernel console should send CRLF not LFCR) - Not all serial drivers had the LFCR code in their poll_put_char() functions. In my case I was running serial/samsung.c which lacked it. I've moved the handling to uart_poll_put_char() to fix the above problems. Now when I use kdb (and don't point console= to the same UART) I no longer get: [0]kdb> [0]kdb> [0]kdb> Signed-off-by:
Doug Anderson <dianders@chromium.org> Reviewed-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Julia Lawall authored
Use del_timer_sync to ensure that the timer is stopped on all CPUs before the driver exists. This change was suggested by Thomas Gleixner. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ declarer name module_exit; identifier ex; @@ module_exit(ex); @@ identifier r.ex; @@ ex(...) { <... - del_timer + del_timer_sync (...) ...> } // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
Daniel Thompson authored
The mux driver is anomalous among all the serial drivers that can define SUPPORT_SYSRQ because it can, with some configs, set SUPPORT_SYSRQ when SERIAL_CORE_CONSOLE is not set. Not only does this impose a pointless (but tiny) runtime overhead for such configs but, more significantly, it adds needless complexity when doing a code review to check for unexpected side effects of any changes to the serial core. This is (cross-)compile tested only because I do not have any PA-RISC hardware. Signed-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Simon Horman authored
According to the platform data for the legacy-C initialisation of sh-sci for the r8a7779 SoC and my own testing the SCIx_SH4_SCIF_REGTYPE bit of scscr needs to be set. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Loic Poulain authored
In the same manner as 8250_pci, 8250_dw needs some baytrail specific quirks to be used. The reference clock needs to be adjusted before divided in order to have the minimum error rate on the baudrate. The specific byt set termios function is stored in the driver_data field of the acpi device id via the dw8250_acpi_desc structure. Remove the uartclk field which is no longer delivered as driver data. Signed-off-by:
Loic Poulain <loic.poulain@intel.com> Signed-off-by:
-
Alexander Stein authored
This will additionally show the specific UART device instead of the general module name. This cames in handy so check for the interupts of a specific device if there are several of them. Signed-off-by:
Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by:
-
- 20 Apr, 2014 5 commits
-
-
Linus Torvalds authored
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull slave-dmaengine fixes from Vinod Koul: "Back from long weekend here in India and now the time to send fixes for slave dmaengine. - Dan's fix of sirf xlate code - Jean's fix for timberland - edma fixes by Sekhar for SG handling and Yuan for changing init call" * 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: dma: fix eDMA driver as a subsys_initcall dmaengine: sirf: off by one in of_dma_sirfsoc_xlate() platform: Fix timberdale dependencies dma: edma: fix incorrect SG list handling -
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: "Fixes for regressions: - fix wrong IOMMU enumeration causing some SCSI device drivers initialization failures - ARM-SMMU fixes for a panic condition and a wrong return value" * tag 'iommu-fixes-v3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/arm-smmu: fix panic in arm_smmu_alloc_init_pte iommu/arm-smmu: Return 0 on unmap failure iommu/vt-d: fix bug in matching PCI devices with DRHD/RMRR descriptors iommu/vt-d: Fix get_domain_for_dev() handling of upstream PCIe bridges iommu/vt-d: fix memory leakage caused by commit ea8ea460 -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf tooling fixes from Ingo Molnar: "Three small tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Improve error reporting perf tools: Adjust symbols in VDSO perf kvm: Fix 'Min time' counting in report command
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/jolsa/perf into perf/urgent Pull perf/urgent fixes from Jiri Olsa: User visible changes: * Adjust symbols in VDSO to properly resolve its function names (Vladimir Nikulichev) * Improve error reporting for record session failure (Adrien BAK) * Fix 'Min time' counting in report command (Alexander Yarygin) Signed-off-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 19 Apr, 2014 3 commits
-
-
Adrien BAK authored
In the current version, when using perf record, if something goes wrong in tools/perf/builtin-record.c:375 session = perf_session__new(file, false, NULL); The error message: "Not enough memory for reading per file header" is issued. This error message seems to be outdated and is not very helpful. This patch proposes to replace this error message by "Perf session creation failed" I believe this issue has been brought to lkml: https://lkml.org/lkml/2014/2/24/458 although this patch only tackles a (small) part of the issue. Additionnaly, this patch improves error reporting in tools/perf/util/data.c open_file_write. Currently, if the call to open fails, the user is unaware of it. This patch logs the error, before returning the error code to the caller. Reported-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Adrien BAK <adrien.bak@metascale.org> Link: http://lkml.kernel.org/r/1397786443.3093.4.camel@beast [ Reorganize the changelog into paragraphs ] [ Added empty line after fd declaration in open_file_write ] Signed-off-by:
-
Vladimir Nikulichev authored
pert-report doesn't resolve function names in VDSO: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% 0x7fff6b1fe861 __gettimeofday ACE_OS::gettimeofday() ... In this case symbol values should be adjusted the same way as for executables, relocatable objects and prelinked libraries. After fix: $ perf report --stdio -g flat,0.0,15,callee --sort pid ... 8.76% __vdso_gettimeofday __gettimeofday ACE_OS::gettimeofday() Signed-off-by:Vladimir Nikulichev <nvs@tbricks.com> Tested-by:
Namhyung Kim <namhyung@kernel.org> Reviewed-by:
Adrian Hunter <adrian.hunter@intel.com> Link: http://lkml.kernel.org/r/969812.163009436-sendEmail@nvsSigned-off-by:
-
Alexander Yarygin authored
Every event in the perf-kvm has a 'stats' structure, which contains max/min/average/etc times of handling this event. The problem is that the 'perf-kvm stat report' command always shows that 'min time' is 0us for every event. Example: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 0us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 0us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 0us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 0us 44us 16.49us ( +- 38.20% ) [..] This happens because the 'stats' structure is not initialized and stats->min equals to 0. Lets initialize the structure for every event after its allocation using init_stats() function. This initializes stats->min to -1 and makes 'Min time' statistics counting work: # perf kvm stat report Analyze events for all VCPUs: VM-EXIT Samples Samples% Time% Min Time Max Time Avg time [..] 0xB2 MSCH 12 0.07% 0.00% 6us 8us 7.31us ( +- 2.11% ) 0xB2 CHSC 12 0.07% 0.00% 7us 18us 9.39us ( +- 9.49% ) 0xB2 STPX 8 0.05% 0.00% 1us 2us 1.88us ( +- 7.18% ) 0xB2 STSI 7 0.04% 0.00% 1us 44us 16.49us ( +- 38.20% ) [..] Signed-off-by:Alexander Yarygin <yarygin@linux.vnet.ibm.com> Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1397053319-2130-3-git-send-email-borntraeger@de.ibm.com [ Fixing the perf examples changelog output ] Signed-off-by:
-
