Add CONFIG_VIRTUALIZATION to the MIPS architecture and include the
the virtio code there. Used to enable the virtio drivers under QEMU.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2002/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Just do what everyone else is doing by placing __read_mostly things in
the .data.read_mostly section.

mips_io_port_base can not be read-only (const) and writable
(__read_mostly) at the same time.  One of them has to go, so I chose
to eliminate the __read_mostly.  It will still get stuck in a portion
of memory that is not adjacent to things that are written, and thus
not be on a dirty cache line, for whatever that is worth.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1702/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Add common platform_device and helper code to make the registration
of the built-in wireless MAC easier on the Atheros AR9130/AR9132
based boards. Also register the WMAC device on the AR81 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Imre Kaloz <kaloz@openwrt.org>,
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1962/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1952/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Several boards are using the built-in SPI controller of the
AR71XX/AR724X/AR913X SoCs. This patch adds common platform_device
and helper code to register it. Additionally, the patch registers
the SPI bus on the PB44 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1956/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

The Atheros AR71XX/AR724X/AR913X SoCs have a built-in SPI controller. This
patch implements a driver for that.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: spi-devel-general@lists.sourceforge.net
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: linux-mips@linux-mips.org
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1960/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Almost all boards have one or more push buttons connected to GPIO lines.
This patch adds common code to register a platform_device for them.

The patch also adds support for the buttons on the PB44 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1954/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

All supported SoCs have a built-in hardware watchdog driver. This patch
registers a platform_device for that to make it usable.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1955/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Almost all boards have one or more LEDs connected to GPIO lines. This
patch adds common code to register a platform_device for them.

The patch also adds support for the LEDs on the PB44 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1953/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1950/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1949/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch implements generic GPIO routines for the built-in
GPIO controllers of the Atheros AR71XX/AR724X/AR913X SoCs.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1948/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch adds initial support for various Atheros SoCs based on the
MIPS 24Kc core. The following models are supported at the moment:

  - AR7130
  - AR7141
  - AR7161
  - AR9130
  - AR9132
  - AR7240
  - AR7241
  - AR7242

The current patch contains minimal support only, but the resulting
kernel can boot into user-space with using of an initramfs image on
various boards which are using these SoCs. Support for more built-in
devices and individual boards will be implemented in further patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Cc: Kathy Giori <Kathy.Giori@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1947/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

In order not to be left behind, we add jump label support for MIPS.

Tested on 64-bit big endian (Octeon), and 32-bit little endian
(malta/qemu).
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jason Baron <jbaron@redhat.com>
Patchwork: https://patchwork.linux-mips.org/patch/1923/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

On the off chance that uasm ever warns about overflow, there is no way
to know what the offending instruction is.

Change the printks to WARNs, so we can get a nice stack trace.  It has
the added benefit of being much more noticeable than the short single
line warning message, so is less likely to be ignored.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1905/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Octeon can use scratch registers in the TLB handlers.  Octeon II can
use LDX instructions.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1904/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Needed by Octeon II optimized TLB handlers.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Pachwork: https://patchwork.linux-mips.org/patch/1903/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

If the CPU supports BBIT0 and BBIT1, use them in TLB handlers as they
are more efficient than an AND followed by an branch and then
restoring the clobbered register.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1873/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

these are already defined, but declaring them allow them to be used
outside of uasm.c.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1872/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Decide at runtime to use either Context or KScratch to hold the PGD
pointer.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1876/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1875/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Probe c0_config4 for KScratch registers and report them in /proc/cpuinfo.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1877/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

This patch adds a generic solution to support multiple machines based on
a given SoC within a single kernel image. It is implemented already for
several other architectures but MIPS has no generic support for that yet.

[Ralf: This competes with DT but DT is a much more complex solution and this
code has been used by OpenWRT for a long time so for now DT is a bad reason
to stop the merge but longer term this should be migrated to DT.]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: kaloz@openwrt.org
Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Cc: Cliff Holden <Cliff.Holden@Atheros.com>
Patchwork: https://patchwork.linux-mips.org/patch/1814/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Using %pR standardizes the struct resource output.
Signed-off-by: Joe Perches <joe@perches.com>
To: Jiri Kosina <trivial@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1772/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Signed-off-by: Joe Perches <joe@perches.com>
To: Jiri Kosina <trivial@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1756/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  Update Pekka's email address in MAINTAINERS
  mm/slab.c: make local symbols static
  slub: Avoid use of slub_lock in show_slab_objects()
  memory hotplug: one more lock on memory hotplug

Merge branches 'core-fixes-for-linus', 'x86-fixes-for-linus', 'timers-fixes-for-linus' and 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  rcu: avoid pointless blocked-task warnings
  rcu: demote SRCU_SYNCHRONIZE_DELAY from kernel-parameter status
  rtmutex: Fix comment about why new_owner can be NULL in wake_futex_pi()

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, olpc: Add missing Kconfig dependencies
  x86, mrst: Set correct APB timer IRQ affinity for secondary cpu
  x86: tsc: Fix calibration refinement conditionals to avoid divide by zero
  x86, ia64, acpi: Clean up x86-ism in drivers/acpi/numa.c

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timekeeping: Make local variables static
  time: Rename misnamed minsec argument of clocks_calc_mult_shift()

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Remove syscall_exit_fields
  tracing: Only process module tracepoints once
  perf record: Add "nodelay" mode, disabled by default
  perf sched: Fix list of events, dropping unsupported ':r' modifier
  Revert "perf tools: Emit clearer message for sys_perf_event_open ENOENT return"
  perf top: Fix annotate segv
  perf evsel: Fix order of event list deletion

* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (161 commits)
  ARM: pxa: fix building issue of missing physmap.h
  ARM: mmp: PXA910 drive strength FAST using wrong value
  ARM: mmp: MMP2 drive strength FAST using wrong value
  ARM: pxa: fix recursive calls in pxa_low_gpio_chip
  AT91: Support for gsia18s board
  AT91: Acme Systems FOX Board G20 board files
  AT91: board-sam9m10g45ek.c: Remove duplicate inclusion of mach/hardware.h
  ARM: pxa: fix suspend/resume array index miscalculation
  ARM: pxa: use cpu_has_ipr() consistently in irq.c
  ARM: pxa: remove unused variable in clock-pxa3xx.c
  ARM: pxa: fix warning in zeus.c
  ARM: sa1111: fix typo in sa1111_retrigger_lowirq()
  ARM mxs: clkdev related compile fixes
  ARM i.MX mx31_3ds: Fix MC13783 regulator names
  ARM: plat-stmp3xxx: irq_data conversion.
  ARM: plat-spear: irq_data conversion.
  ARM: plat-orion: irq_data conversion.
  ARM: plat-omap: irq_data conversion.
  ARM: plat-nomadik: irq_data conversion.
  ARM: plat-mxc: irq_data conversion.
  ...

Fix up trivial conflict in arch/arm/plat-omap/gpio.c (Lennert
Buytenhek's irq_data conversion clashing with some omap irq updates)

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: fix missing branch in __error_a
  ARM: fix /proc/$PID/stack on SMP
  ARM: Fix build regression on SA11x0, PXA, and H720x targets
  ARM: 6625/1: use memblock memory regions for "System RAM" I/O resources
  ARM: fix wrongly patched constants
  ARM: 6624/1: fix dependency for CONFIG_SMP_ON_UP
  ARM: 6623/1: Thumb-2: Fix out-of-range offset for Thumb-2 in proc-v7.S
  ARM: 6622/1: fix dma_unmap_sg() documentation
  ARM: 6621/1: bitops: remove condition code clobber for CLZ
  ARM: 6620/1: Change misleading warning when CONFIG_CMDLINE_FORCE is used
  ARM: 6619/1: nommu: avoid mapping vectors page when !CONFIG_MMU
  ARM: sched_clock: make minsec argument to clocks_calc_mult_shift() zero
  ARM: sched_clock: allow init_sched_clock() to be called early
  ARM: integrator: fix compile warning in cpu.c
  ARM: 6616/1: Fix ep93xx-fb init/exit annotations
  ARM: twd: fix display of twd frequency
  ARM: udelay: prevent math rounding resulting in short udelays

Merge branch 'tip/perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent

Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable

Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel-stable

Signed-off-by: Pekka Enberg <penberg@kernel.org>

Local symbols should be static.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Pekka Enberg <penberg@kernel.org>

When DEBUG_LL is not set, we don't want __error_a re-entering
__lookup_machine_type - we want it to go to the error function.  This
used to be the case before we reorganized the layout for hotplug cpu,
as we used to fall through to __error.  With the changed layout, we
need an explicit branch here instead.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

Drive strength for PXA910 is a 2 bit value but because of the mapping in
plat-pxa/mfp.h needs to be shifted up one bit to handle real
location in mfp registers.  (MMP2 and PXA910 drive strength start
at bit 11 while PXA168 starts at bit 10).

Values 0, 1, 2, and 3 effectively need to be
0, 2, 4, and 6 to fit into register.  8 does not work.
Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

Drive strength for MMP2 is a 2 bit value but because of the mapping in
plat-pxa/mfp.h needs to be shifted up one bit to handle real
location in mfp registers.  (MMP2 and PXA910 drive strength start
at bit 11 while PXA168 starts at bit 10).

Values 0, 1, 2, and 3 effectively need to be
0, 2, 4, and 6 to fit into register.  8 does not work.
Signed-off-by: Philip Rakity <prakity@marvell.com>
Tested-by: John Watlington <wad@laptop.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Tested-by: Marek Vasut <marek.vasut@gmail.com>