Pull xen updates from Juergen Gross:

 - a small cleanup in the drivers/xen/xenbus Makefile

 - a fix of the Xen xenstore driver to improve connecting to a late
   started Xenstore

 - an enhancement for better support of ballooning in PVH guests

 - a cleanup using try_cmpxchg() instead of open coding it

* tag 'for-linus-6.10a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  drivers/xen: Improve the late XenStore init protocol
  xen/xenbus: Use *-y instead of *-objs in Makefile
  xen/x86: add extra pages to unpopulated-alloc if available
  locking/x86/xen: Use try_cmpxchg() in xen_alloc_p2m_entry()

Pull more btrfs updates from David Sterba:
 "A few more updates, mostly stability fixes or user visible changes:

   - fix race in zoned mode during device replace that can lead to
     use-after-free

   - update return codes and lower message levels for quota rescan where
     it's causing false alerts

   - fix unexpected qgroup id reuse under some conditions

   - fix condition when looking up extent refs

   - add option norecovery (removed in 6.8), the intended replacements
     haven't been used and some aplications still rely on the old one

   - build warning fixes"

* tag 'for-6.10-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: re-introduce 'norecovery' mount option
  btrfs: fix end of tree detection when searching for data extent ref
  btrfs: scrub: initialize ret in scrub_simple_mirror() to fix compilation warning
  btrfs: zoned: fix use-after-free due to race with dev replace
  btrfs: qgroup: fix qgroup id collision across mounts
  btrfs: qgroup: update rescan message levels and error codes

Pull more erofs updates from Gao Xiang:
 "The main ones are metadata API conversion to byte offsets by Al Viro.

  Another patch gets rid of unnecessary memory allocation out of DEFLATE
  decompressor. The remaining one is a trivial cleanup.

   - Convert metadata APIs to byte offsets

   - Avoid allocating DEFLATE streams unnecessarily

   - Some erofs_show_options() cleanup"

* tag 'erofs-for-6.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: avoid allocating DEFLATE streams before mounting
  z_erofs_pcluster_begin(): don't bother with rounding position down
  erofs: don't round offset down for erofs_read_metabuf()
  erofs: don't align offset for erofs_read_metabuf() (simple cases)
  erofs: mechanically convert erofs_read_metabuf() to offsets
  erofs: clean up erofs_show_options()

Pull bcachefs fixes from Kent Overstreet:
 "Nothing exciting, just syzbot fixes (except for the one
  FMODE_CAN_ODIRECT patch).

  Looks like syzbot reports have slowed down; this is all catch up from
  two weeks of conferences.

  Next hardening project is using Thomas's error injection tooling to
  torture test repair"

* tag 'bcachefs-2024-05-24' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: Fix race path in bch2_inode_insert()
  bcachefs: Ensure we're RW before journalling
  bcachefs: Fix shutdown ordering
  bcachefs: Fix unsafety in bch2_dirent_name_bytes()
  bcachefs: Fix stack oob in __bch2_encrypt_bio()
  bcachefs: Fix btree_trans leak in bch2_readahead()
  bcachefs: Fix bogus verify_replicas_entry() assert
  bcachefs: Check for subvolues with bogus snapshot/inode fields
  bcachefs: bch2_checksum() returns 0 for unknown checksum type
  bcachefs: Fix bch2_alloc_ciphers()
  bcachefs: Add missing guard in bch2_snapshot_has_children()
  bcachefs: Fix missing parens in drop_locks_do()
  bcachefs: Improve bch2_assert_pos_locked()
  bcachefs: Fix shift overflows in replicas.c
  bcachefs: Fix shift overflow in btree_lost_data()
  bcachefs: Fix ref in trans_mark_dev_sbs() error path
  bcachefs: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
  bcachefs: Fix rcu splat in check_fix_ptrs()

Pull input updates from Dmitry Torokhov:

 - a change to input core to trim amount of keys data in modalias string
   in case when a device declares too many keys and they do not fit in
   uevent buffer instead of reporting an error which results in uevent
   not being generated at all

 - support for Machenike G5 Pro Controller added to xpad driver

 - support for FocalTech FT5452 and FT8719 added to edt-ft5x06

 - support for new SPMI vibrator added to pm8xxx-vibrator driver

 - missing locking added to cyapa touchpad driver

 - removal of unused fields in various driver structures

 - explicit initialization of i2c_device_id::driver_data to 0 dropped
   from input drivers

 - other assorted fixes and cleanups.

* tag 'input-for-v6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
  Input: edt-ft5x06 - add support for FocalTech FT5452 and FT8719
  dt-bindings: input: touchscreen: edt-ft5x06: Document FT5452 and FT8719 support
  Input: xpad - add support for Machenike G5 Pro Controller
  Input: try trimming too long modalias strings
  Input: drop explicit initialization of struct i2c_device_id::driver_data to 0
  Input: zet6223 - remove an unused field in struct zet6223_ts
  Input: chipone_icn8505 - remove an unused field in struct icn8505_data
  Input: cros_ec_keyb - remove an unused field in struct cros_ec_keyb
  Input: lpc32xx-keys - remove an unused field in struct lpc32xx_kscan_drv
  Input: matrix_keypad - remove an unused field in struct matrix_keypad
  Input: tca6416-keypad - remove unused struct tca6416_drv_data
  Input: tca6416-keypad - remove an unused field in struct tca6416_keypad_chip
  Input: da7280 - remove an unused field in struct da7280_haptic
  Input: ff-core - prefer struct_size over open coded arithmetic
  Input: cyapa - add missing input core locking to suspend/resume functions
  input: pm8xxx-vibrator: add new SPMI vibrator support
  dt-bindings: input: qcom,pm8xxx-vib: add new SPMI vibrator module
  input: pm8xxx-vibrator: refactor to support new SPMI vibrator
  Input: pm8xxx-vibrator - correct VIB_MAX_LEVELS calculation
  Input: sur40 - convert le16 to cpu before use
  ...

Pull sound fixes from Takashi Iwai:
 "A collection of small fixes for 6.10-rc1. Most of changes are various
  device-specific fixes and quirks, while there are a few small changes
  in ALSA core timer and module / built-in fixes"

* tag 'sound-fix-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: fix mute/micmute LEDs don't work for ProBook 440/460 G11.
  ALSA: core: Enable proc module when CONFIG_MODULES=y
  ALSA: core: Fix NULL module pointer assignment at card init
  ALSA: hda/realtek: Enable headset mic of JP-IK LEAP W502 with ALC897
  ASoC: dt-bindings: stm32: Ensure compatible pattern matches whole string
  ASoC: tas2781: Fix wrong loading calibrated data sequence
  ASoC: tas2552: Add TX path for capturing AUDIO-OUT data
  ALSA: usb-audio: Fix for sampling rates support for Mbox3
  Documentation: sound: Fix trailing whitespaces
  ALSA: timer: Set lower bound of start tick time
  ASoC: codecs: ES8326: solve hp and button detect issue
  ASoC: rt5645: mic-in detection threshold modification
  ASoC: Intel: sof_sdw_rt_sdca_jack_common: Use name_prefix for `-sdca` detection

Merge tag 'char-misc-6.10-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc fix from Greg KH:
 "Here is one remaining bugfix for 6.10-rc1 that missed the 6.9-final
  merge window, and has been sitting in my tree and linux-next for quite
  a while now, but wasn't sent to you (my fault, travels...)

  It is a bugfix to resolve an error in the speakup code that could
  overflow a buffer.

  It has been in linux-next for a while with no reported problems"

* tag 'char-misc-6.10-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  speakup: Fix sizeof() vs ARRAY_SIZE() bug

Pull tty/serial fixes from Greg KH:
 "Here are some small TTY and Serial driver fixes that missed the
  6.9-final merge window, but have been in my tree for weeks (my fault,
  travel caused me to miss this)

  These fixes include:

   - more n_gsm fixes for reported problems

   - 8520_mtk driver fix

   - 8250_bcm7271 driver fix

   - sc16is7xx driver fix

  All of these have been in linux-next for weeks without any reported
  problems"

* tag 'tty-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: sc16is7xx: fix bug in sc16is7xx_set_baud() when using prescaler
  serial: 8250_bcm7271: use default_mux_rate if possible
  serial: 8520_mtk: Set RTS on shutdown for Rx in-band wakeup
  tty: n_gsm: fix missing receive state reset after mode switch
  tty: n_gsm: fix possible out-of-bounds in gsm0_receive()

Pull hardening fixes from Kees Cook:

 - loadpin: Prevent SECURITY_LOADPIN_ENFORCE=y without module
   decompression (Stephen Boyd)

 - ubsan: Restore dependency on ARCH_HAS_UBSAN

 - kunit/fortify: Fix memcmp() test to be amplitude agnostic

* tag 'hardening-v6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  kunit/fortify: Fix memcmp() test to be amplitude agnostic
  ubsan: Restore dependency on ARCH_HAS_UBSAN
  loadpin: Prevent SECURITY_LOADPIN_ENFORCE=y without module decompression

Pull tracefs/eventfs updates from Steven Rostedt:
 "Bug fixes:

   - The eventfs directories need to have unique inode numbers. Make
     sure that they do not get the default file inode number.

   - Update the inode uid and gid fields on remount.

     When a remount happens where a uid and/or gid is specified, all the
     tracefs files and directories should get the specified uid and/or
     gid. But this can be sporadic when some uids were assigned already.
     There's already a list of inodes that are allocated. Just update
     their uid and gid fields at the time of remount.

   - Update the eventfs_inodes on remount from the top level "events"
     descriptor.

     There was a bug where not all the eventfs files or directories
     where getting updated on remount. One fix was to clear the
     SAVED_UID/GID flags from the inode list during the iteration of the
     inodes during the remount. But because the eventfs inodes can be
     freed when the last referenced is released, not all the
     eventfs_inodes were being updated. This lead to the ownership
     selftest to fail if it was run a second time (the first time would
     leave eventfs_inodes with no corresponding tracefs_inode).

     Instead, for eventfs_inodes, only process the "events"
     eventfs_inode from the list iteration, as it is guaranteed to have
     a tracefs_inode (it's never freed while the "events" directory
     exists). As it has a list of its children, and the children have a
     list of their children, just iterate all the eventfs_inodes from
     the "events" descriptor and it is guaranteed to get all of them.

   - Clear the EVENT_INODE flag from the tracefs_drop_inode() callback.

     Currently the EVENTFS_INODE FLAG is cleared in the tracefs_d_iput()
     callback. But this is the wrong location. The iput() callback is
     called when the last reference to the dentry inode is hit. There
     could be a case where two dentry's have the same inode, and the
     flag will be cleared prematurely. The flag needs to be cleared when
     the last reference of the inode is dropped and that happens in the
     inode's drop_inode() callback handler.

  Cleanups:

   - Consolidate the creation of a tracefs_inode for an eventfs_inode

     A tracefs_inode is created for both files and directories of the
     eventfs system. It is open coded. Instead, consolidate it into a
     single eventfs_get_inode() function call.

   - Remove the eventfs getattr and permission callbacks.

     The permissions for the eventfs files and directories are updated
     when the inodes are created, on remount, and when the user sets
     them (via setattr). The inodes hold the current permissions so
     there is no need to have custom getattr or permissions callbacks as
     they will more likely cause them to be incorrect. The inode's
     permissions are updated when they should be updated. Remove the
     getattr and permissions inode callbacks.

   - Do not update eventfs_inode attributes on creation of inodes.

     The eventfs_inodes attribute field is used to store the permissions
     of the directories and files for when their corresponding inodes
     are freed and are created again. But when the creation of the
     inodes happen, the eventfs_inode attributes are recalculated. The
     recalculation should only happen when the permissions change for a
     given file or directory. Currently, the attribute changes are just
     being set to their current files so this is not a bug, but it's
     unnecessary and error prone. Stop doing that.

   - The events directory inode is created once when the events
     directory is created and deleted when it is deleted. It is now
     updated on remount and when the user changes the permissions.
     There's no need to use the eventfs_inode of the events directory to
     store the events directory permissions. But using it to store the
     default permissions for the files within the directory that have
     not been updated by the user can simplify the code"

* tag 'trace-tracefs-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  eventfs: Do not use attributes for events directory
  eventfs: Cleanup permissions in creation of inodes
  eventfs: Remove getattr and permission callbacks
  eventfs: Consolidate the eventfs_inode update in eventfs_get_inode()
  tracefs: Clear EVENT_INODE flag in tracefs_drop_inode()
  eventfs: Update all the eventfs_inodes from the events descriptor
  tracefs: Update inode permissions on remount
  eventfs: Keep the directories from having the same inode number as files

Pull NFS client updates from Trond Myklebust:
 "Stable fixes:
   - nfs: fix undefined behavior in nfs_block_bits()
   - NFSv4.2: Fix READ_PLUS when server doesn't support OP_READ_PLUS

  Bugfixes:
   - Fix mixing of the lock/nolock and local_lock mount options
   - NFSv4: Fixup smatch warning for ambiguous return
   - NFSv3: Fix remount when using the legacy binary mount api
   - SUNRPC: Fix the handling of expired RPCSEC_GSS contexts
   - SUNRPC: fix the NFSACL RPC retries when soft mounts are enabled
   - rpcrdma: fix handling for RDMA_CM_EVENT_DEVICE_REMOVAL

  Features and cleanups:
   - NFSv3: Use the atomic_open API to fix open(O_CREAT|O_TRUNC)
   - pNFS/filelayout: S layout segment range in LAYOUTGET
   - pNFS: rework pnfs_generic_pg_check_layout to check IO range
   - NFSv2: Turn off enabling of NFS v2 by default"

* tag 'nfs-for-6.10-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: fix undefined behavior in nfs_block_bits()
  pNFS: rework pnfs_generic_pg_check_layout to check IO range
  pNFS/filelayout: check layout segment range
  pNFS/filelayout: fixup pNfs allocation modes
  rpcrdma: fix handling for RDMA_CM_EVENT_DEVICE_REMOVAL
  NFS: Don't enable NFS v2 by default
  NFS: Fix READ_PLUS when server doesn't support OP_READ_PLUS
  sunrpc: fix NFSACL RPC retry on soft mount
  SUNRPC: fix handling expired GSS context
  nfs: keep server info for remounts
  NFSv4: Fixup smatch warning for ambiguous return
  NFS: make sure lock/nolock overriding local_lock mount option
  NFS: add atomic_open for NFSv3 to handle O_TRUNC correctly.
  pNFS/filelayout: Specify the layout segment range in LAYOUTGET
  pNFS/filelayout: Remove the whole file layout requirement

Pull more block updates from Jens Axboe:
 "Followup block updates, mostly due to NVMe being a bit late to the
  party. But nothing major in there, so not a big deal.

  In detail, this contains:

   - NVMe pull request via Keith:
       - Fabrics connection retries (Daniel, Hannes)
       - Fabrics logging enhancements (Tokunori)
       - RDMA delete optimization (Sagi)

   - ublk DMA alignment fix (me)

   - null_blk sparse warning fixes (Bart)

   - Discard support for brd (Keith)

   - blk-cgroup list corruption fixes (Ming)

   - blk-cgroup stat propagation fix (Waiman)

   - Regression fix for plugging stall with md (Yu)

   - Misc fixes or cleanups (David, Jeff, Justin)"

* tag 'block-6.10-20240523' of git://git.kernel.dk/linux: (24 commits)
  null_blk: fix null-ptr-dereference while configuring 'power' and 'submit_queues'
  blk-throttle: remove unused struct 'avg_latency_bucket'
  block: fix lost bio for plug enabled bio based device
  block: t10-pi: add MODULE_DESCRIPTION()
  blk-mq: add helper for checking if one CPU is mapped to specified hctx
  blk-cgroup: Properly propagate the iostat update up the hierarchy
  blk-cgroup: fix list corruption from reorder of WRITE ->lqueued
  blk-cgroup: fix list corruption from resetting io stat
  cdrom: rearrange last_media_change check to avoid unintentional overflow
  nbd: Fix signal handling
  nbd: Remove a local variable from nbd_send_cmd()
  nbd: Improve the documentation of the locking assumptions
  nbd: Remove superfluous casts
  nbd: Use NULL to represent a pointer
  brd: implement discard support
  null_blk: Fix two sparse warnings
  ublk_drv: set DMA alignment mask to 3
  nvme-rdma, nvme-tcp: include max reconnects for reconnect logging
  nvmet-rdma: Avoid o(n^2) loop in delete_ctrl
  nvme: do not retry authentication failures
  ...

Pull io_uring fixes from Jens Axboe:
 "Single fix here for a regression in 6.9, and then a simple cleanup
  removing some dead code"

* tag 'io_uring-6.10-20240523' of git://git.kernel.dk/linux:
  io_uring: remove checks for NULL 'sq_offset'
  io_uring/sqpoll: ensure that normal task_work is also run timely

Merge tag 'regulator-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A bunch of fixes that came in during the merge window.

  Matti found several issues with some of the more complexly configured
  Rohm regulators and the helpers they use and there were some errors in
  the specification of tps6594 when regulators are grouped together"

* tag 'regulator-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps6594-regulator: Correct multi-phase configuration
  regulator: tps6287x: Force writing VSEL bit
  regulator: pickable ranges: don't always cache vsel
  regulator: rohm-regulator: warn if unsupported voltage is set
  regulator: bd71828: Don't overwrite runtime voltages

Merge tag 'regmap-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap fix from Mark Brown:
 "Guenter ran with memory sanitisers and found an issue in the new KUnit
  tests that Richard added where an assumption in older test code was
  exposed, this was fixed quickly by Richard"

* tag 'regmap-fix-v6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: kunit: Fix array overflow in stride() test

Pull networking fixes from Paolo Abeni:
 "Quite smaller than usual. Notably it includes the fix for the unix
  regression from the past weeks. The TCP window fix will require some
  follow-up, already queued.

  Current release - regressions:

   - af_unix: fix garbage collection of embryos

  Previous releases - regressions:

   - af_unix: fix race between GC and receive path

   - ipv6: sr: fix missing sk_buff release in seg6_input_core

   - tcp: remove 64 KByte limit for initial tp->rcv_wnd value

   - eth: r8169: fix rx hangup

   - eth: lan966x: remove ptp traps in case the ptp is not enabled

   - eth: ixgbe: fix link breakage vs cisco switches

   - eth: ice: prevent ethtool from corrupting the channels

  Previous releases - always broken:

   - openvswitch: set the skbuff pkt_type for proper pmtud support

   - tcp: Fix shift-out-of-bounds in dctcp_update_alpha()

  Misc:

   - a bunch of selftests stabilization patches"

* tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits)
  r8169: Fix possible ring buffer corruption on fragmented Tx packets.
  idpf: Interpret .set_channels() input differently
  ice: Interpret .set_channels() input differently
  nfc: nci: Fix handling of zero-length payload packets in nci_rx_work()
  net: relax socket state check at accept time.
  tcp: remove 64 KByte limit for initial tp->rcv_wnd value
  net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
  tls: fix missing memory barrier in tls_init
  net: fec: avoid lock evasion when reading pps_enable
  Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI"
  testing: net-drv: use stats64 for testing
  net: mana: Fix the extra HZ in mana_hwc_send_request
  net: lan966x: Remove ptp traps in case the ptp is not enabled.
  openvswitch: Set the skbuff pkt_type for proper pmtud support.
  selftest: af_unix: Make SCM_RIGHTS into OOB data.
  af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS
  tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
  selftests/net: use tc rule to filter the na packet
  ipv6: sr: fix memleak in seg6_hmac_init_algo
  af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock.
  ...

Pull tracing fixes from Steven Rostedt:
 "Minor last minute fixes:

   - Fix a very tight race between the ring buffer readers and resizing
     the ring buffer

   - Correct some stale comments in the ring buffer code

   - Fix kernel-doc in the rv code

   - Add a MODULE_DESCRIPTION to preemptirq_delay_test"

* tag 'trace-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  rv: Update rv_en(dis)able_monitor doc to match kernel-doc
  tracing: Add MODULE_DESCRIPTION() to preemptirq_delay_test
  ring-buffer: Fix a race between readers and resize checks
  ring-buffer: Correct stale comments related to non-consuming readers

Pull tracing tool fix from Steven Rostedt:
 "Fix printf format warnings in latency-collector.

  Use the printf format string with %s to take a string instead of
  taking in a string directly"

* tag 'trace-tools-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tools/latency-collector: Fix -Wformat-security compile warns

Merge tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing cleanup from Steven Rostedt:
 "Remove second argument of __assign_str()

  The __assign_str() macro logic of the TRACE_EVENT() macro was
  optimized so that it no longer needs the second argument. The
  __assign_str() is always matched with __string() field that takes a
  field name and the source for that field:

    __string(field, source)

  The TRACE_EVENT() macro logic will save off the source value and then
  use that value to copy into the ring buffer via the __assign_str().

  Before commit c1fa617c ("tracing: Rework __assign_str() and
  __string() to not duplicate getting the string"), the __assign_str()
  needed the second argument which would perform the same logic as the
  __string() source parameter did. Not only would this add overhead, but
  it was error prone as if the __assign_str() source produced something
  different, it may not have allocated enough for the string in the ring
  buffer (as the __string() source was used to determine how much to
  allocate)

  Now that the __assign_str() just uses the same string that was used in
  __string() it no longer needs the source parameter. It can now be
  removed"

* tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/treewide: Remove second parameter of __assign_str()

Merge tag 'sparc-for-6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc

Pull sparc updates from Andreas Larsson:

 - Avoid on-stack cpumask variables in a number of places

 - Move struct termio to asm/termios.h, matching other architectures and
   allowing certain user space applications to build also for sparc

 - Fix missing prototype warnings for sparc64

 - Fix version generation warnings for sparc32

 - Fix bug where non-consecutive CPU IDs lead to some CPUs not starting

 - Simplification using swap and cleanup using NULL for pointer

 - Convert sparc parport and chmc drivers to use remove callbacks
   returning void

* tag 'sparc-for-6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
  sparc/leon: Remove on-stack cpumask var
  sparc/pci_msi: Remove on-stack cpumask var
  sparc/of: Remove on-stack cpumask var
  sparc/irq: Remove on-stack cpumask var
  sparc/srmmu: Remove on-stack cpumask var
  sparc: chmc: Convert to platform remove callback returning void
  sparc: parport: Convert to platform remove callback returning void
  sparc: Compare pointers to NULL instead of 0
  sparc: Use swap() to fix Coccinelle warning
  sparc32: Fix version generation failed warnings
  sparc64: Fix number of online CPUs
  sparc64: Fix prototype warning for sched_clock
  sparc64: Fix prototype warnings in adi_64.c
  sparc64: Fix prototype warning for dma_4v_iotsb_bind
  sparc64: Fix prototype warning for uprobe_trap
  sparc64: Fix prototype warning for alloc_irqstack_bootmem
  sparc64: Fix prototype warning for vmemmap_free
  sparc64: Fix prototype warnings in traps_64.c
  sparc64: Fix prototype warning for init_vdso_image
  sparc: move struct termio to asm/termios.h

Pull arm64 fixes from Will Deacon:
 "The major fix here is for a filesystem corruption issue reported on
  Apple M1 as a result of buggy management of the floating point
  register state introduced in 6.8. I initially reverted one of the
  offending patches, but in the end Ard cooked a proper fix so there's a
  revert+reapply in the series.

  Aside from that, we've got some CPU errata workarounds and misc other
  fixes.

   - Fix broken FP register state tracking which resulted in filesystem
     corruption when dm-crypt is used

   - Workarounds for Arm CPU errata affecting the SSBS Spectre
     mitigation

   - Fix lockdep assertion in DMC620 memory controller PMU driver

   - Fix alignment of BUG table when CONFIG_DEBUG_BUGVERBOSE is
     disabled"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/fpsimd: Avoid erroneous elide of user state reload
  Reapply "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
  arm64: asm-bug: Add .align 2 to the end of __BUG_ENTRY
  perf/arm-dmc620: Fix lockdep assert in ->event_init()
  Revert "arm64: fpsimd: Implement lazy restore for kernel mode FPSIMD"
  arm64: errata: Add workaround for Arm errata 3194386 and 3312417
  arm64: cputype: Add Neoverse-V3 definitions
  arm64: cputype: Add Cortex-X4 definitions
  arm64: barrier: Restore spec_bar() macro

Pull virtio updates from Michael Tsirkin:
 "Several new features here:

   - virtio-net is finally supported in vduse

   - virtio (balloon and mem) interaction with suspend is improved

   - vhost-scsi now handles signals better/faster

  And fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
  virtio-pci: Check if is_avq is NULL
  virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
  MAINTAINERS: add Eugenio Pérez as reviewer
  vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
  vp_vdpa: don't allocate unused msix vectors
  sound: virtio: drop owner assignment
  fuse: virtio: drop owner assignment
  scsi: virtio: drop owner assignment
  rpmsg: virtio: drop owner assignment
  nvdimm: virtio_pmem: drop owner assignment
  wifi: mac80211_hwsim: drop owner assignment
  vsock/virtio: drop owner assignment
  net: 9p: virtio: drop owner assignment
  net: virtio: drop owner assignment
  net: caif: virtio: drop owner assignment
  misc: nsm: drop owner assignment
  iommu: virtio: drop owner assignment
  drm/virtio: drop owner assignment
  gpio: virtio: drop owner assignment
  firmware: arm_scmi: virtio: drop owner assignment
  ...

Fix the following -Wformat-security compile warnings adding missing
format arguments:

latency-collector.c: In function ‘show_available’:
latency-collector.c:938:17: warning: format not a string literal and
no format arguments [-Wformat-security]
  938 |                 warnx(no_tracer_msg);
      |                 ^~~~~

latency-collector.c:943:17: warning: format not a string literal and
no format arguments [-Wformat-security]
  943 |                 warnx(no_latency_tr_msg);
      |                 ^~~~~

latency-collector.c: In function ‘find_default_tracer’:
latency-collector.c:986:25: warning: format not a string literal and
no format arguments [-Wformat-security]
  986 |                         errx(EXIT_FAILURE, no_tracer_msg);
      |
                         ^~~~
latency-collector.c: In function ‘scan_arguments’:
latency-collector.c:1881:33: warning: format not a string literal and
no format arguments [-Wformat-security]
 1881 |                                 errx(EXIT_FAILURE, no_tracer_msg);
      |                                 ^~~~

Link: https://lore.kernel.org/linux-trace-kernel/20240404011009.32945-1-skhan@linuxfoundation.org

Cc: stable@vger.kernel.org
Fixes: e23db805 ("tracing/tools: Add the latency-collector to tools directory")
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

An issue was found on the RTL8125b when transmitting small fragmented
packets, whereby invalid entries were inserted into the transmit ring
buffer, subsequently leading to calls to dma_unmap_single() with a null
address.

This was caused by rtl8169_start_xmit() not noticing changes to nr_frags
which may occur when small packets are padded (to work around hardware
quirks) in rtl8169_tso_csum_v2().

To fix this, postpone inspecting nr_frags until after any padding has been
applied.

Fixes: 9020845f ("r8169: improve rtl8169_start_xmit")
Cc: stable@vger.kernel.org
Signed-off-by: Ken Milmore <ken.milmore@gmail.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/27ead18b-c23d-4f49-a020-1fc482c5ac95@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The top "events" directory has a static inode (it's created when it is and
removed when the directory is removed). There's no need to use the events
ei->attr to determine its permissions. But it is used for saving the
permissions of the "events" directory for when it is created, as that is
needed for the default permissions for the files and directories
underneath it.

For example:

 # cd /sys/kernel/tracing
 # mkdir instances/foo
 # chown 1001 instances/foo/events

The files under instances/foo/events should still have the same owner as
instances/foo (which the instances/foo/events ei->attr will hold), but the
events directory now has owner 1001.

Link: https://lore.kernel.org/lkml/20240522165032.104981011@goodmis.org

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The permissions being set during the creation of the inodes was updating
eventfs_inode attributes as well. Those attributes should only be touched
by the setattr or remount operations, not during the creation of inodes.
The eventfs_inode attributes should only be used to set the inodes and
should not be modified during the inode creation.

Simplify the code and fix the situation by:

 1) Removing the eventfs_find_events() and doing a simple lookup for
    the events descriptor in eventfs_get_inode()

 2) Remove update_events_attr() as the attributes should only be used
    to update the inode and should not be modified here.

 3) Add update_inode_attr() that uses the attributes to determine what
    the inode permissions should be.

 4) As the parent_inode of the eventfs_root_inode structure is no longer
    needed, remove it.

Now on creation, the inode gets the proper permissions without causing
side effects to the ei->attr field.

Link: https://lore.kernel.org/lkml/20240522165031.944088388@goodmis.org

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Now that inodes have their permissions updated on remount, the only other
places to update the inode permissions are when they are created and in
the setattr callback. The getattr and permission callbacks are not needed
as the inodes should already be set at their proper settings.

Remove the callbacks, as it not only simplifies the code, but also allows
more flexibility to fix the inconsistencies with various corner cases
(like changing the permission of an instance directory).

Link: https://lore.kernel.org/lkml/20240522165031.782066021@goodmis.org

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

To simplify the code, create a eventfs_get_inode() that is used when an
eventfs file or directory is created. Have the internal tracefs_inode
updated the appropriate flags in this function and update the inode's
mode as well.

Link: https://lore.kernel.org/lkml/20240522165031.624864160@goodmis.org

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When the inode is being dropped from the dentry, the TRACEFS_EVENT_INODE
flag needs to be cleared to prevent a remount from calling
eventfs_remount() on the tracefs_inode private data. There's a race
between the inode is dropped (and the dentry freed) to where the inode is
actually freed. If a remount happens between the two, the eventfs_inode
could be accessed after it is freed (only the dentry keeps a ref count on
it).

Currently the TRACEFS_EVENT_INODE flag is cleared from the dentry iput()
function. But this is incorrect, as it is possible that the inode has
another reference to it. The flag should only be cleared when the inode is
really being dropped and has no more references. That happens in the
drop_inode callback of the inode, as that gets called when the last
reference of the inode is released.

Remove the tracefs_d_iput() function and move its logic to the more
appropriate tracefs_drop_inode() callback function.

Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.908205106@goodmis.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Fixes: baa23a8d ("tracefs: Reset permissions on remount if permissions are options")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The change to update the permissions of the eventfs_inode had the
misconception that using the tracefs_inode would find all the
eventfs_inodes that have been updated and reset them on remount.
The problem with this approach is that the eventfs_inodes are freed when
they are no longer used (basically the reason the eventfs system exists).
When they are freed, the updated eventfs_inodes are not reset on a remount
because their tracefs_inodes have been freed.

Instead, since the events directory eventfs_inode always has a
tracefs_inode pointing to it (it is not freed when finished), and the
events directory has a link to all its children, have the
eventfs_remount() function only operate on the events eventfs_inode and
have it descend into its children updating their uid and gids.

Link: https://lore.kernel.org/all/CAK7LNARXgaWw3kH9JgrnH4vK6fr8LDkNKf3wq8NhMWJrVwJyVQ@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.754424703@goodmis.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: baa23a8d ("tracefs: Reset permissions on remount if permissions are options")
Reported-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When a remount happens, if a gid or uid is specified update the inodes to
have the same gid and uid. This will allow the simplification of the
permissions logic for the dynamically created files and directories.

Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.592429986@goodmis.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Fixes: baa23a8d ("tracefs: Reset permissions on remount if permissions are options")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The directories require unique inode numbers but all the eventfs files
have the same inode number. Prevent the directories from having the same
inode numbers as the files as that can confuse some tooling.

Link: https://lore.kernel.org/linux-trace-kernel/20240523051539.428826685@goodmis.org

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Fixes: 834bf76a ("eventfs: Save directory inodes in the eventfs_inode structure")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Writing 'power' and 'submit_queues' concurrently will trigger kernel
panic:

Test script:

modprobe null_blk nr_devices=0
mkdir -p /sys/kernel/config/nullb/nullb0
while true; do echo 1 > submit_queues; echo 4 > submit_queues; done &
while true; do echo 1 > power; echo 0 > power; done

Test result:

BUG: kernel NULL pointer dereference, address: 0000000000000148
Oops: 0000 [#1] PREEMPT SMP
RIP: 0010:__lock_acquire+0x41d/0x28f0
Call Trace:
 <TASK>
 lock_acquire+0x121/0x450
 down_write+0x5f/0x1d0
 simple_recursive_removal+0x12f/0x5c0
 blk_mq_debugfs_unregister_hctxs+0x7c/0x100
 blk_mq_update_nr_hw_queues+0x4a3/0x720
 nullb_update_nr_hw_queues+0x71/0xf0 [null_blk]
 nullb_device_submit_queues_store+0x79/0xf0 [null_blk]
 configfs_write_iter+0x119/0x1e0
 vfs_write+0x326/0x730
 ksys_write+0x74/0x150

This is because del_gendisk() can concurrent with
blk_mq_update_nr_hw_queues():

nullb_device_power_store	nullb_apply_submit_queues
 null_del_dev
 del_gendisk
				 nullb_update_nr_hw_queues
				  if (!dev->nullb)
				  // still set while gendisk is deleted
				   return 0
				  blk_mq_update_nr_hw_queues
 dev->nullb = NULL

Fix this problem by resuing the global mutex to protect
nullb_device_power_store() and nullb_update_nr_hw_queues() from configfs.

Fixes: 45919fbf ("null_blk: Enable modifying 'submit_queues' after an instance has been configured")
Reported-and-tested-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs9LgsHLnjg8z06LQ3Pr5cax-+Ps+xT7AP7TPnEjStuwZA@mail.gmail.com/Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://lore.kernel.org/r/20240523153934.1937851-1-yukuai1@huaweicloud.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'asoc-fix-v6.10-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.10

A bunch of fixes that came in during the merge window, all driver
specific and none of them especially remarkable.

Jacob Keller says:

====================
intel: Interpret .set_channels() input differently

The ice and idpf drivers can trigger a crash with AF_XDP due to incorrect
interpretation of the asymmetric Tx and Rx parameters in their
.set_channels() implementations:

1. ethtool -l <IFNAME> -> combined: 40
2. Attach AF_XDP to queue 30
3. ethtool -L <IFNAME> rx 15 tx 15
   combined number is not specified, so command becomes {rx_count = 15,
   tx_count = 15, combined_count = 40}.
4. ethnl_set_channels checks, if there are any AF_XDP of queues from the
   new (combined_count + rx_count) to the old one, so from 55 to 40, check
   does not trigger.
5. the driver interprets `rx 15 tx 15` as 15 combined channels and deletes
   the queue that AF_XDP is attached to.

This is fundamentally a problem with interpreting a request for asymmetric
queues as symmetric combined queues.

Fix the ice and idpf drivers to stop interpreting such requests as a
request for combined queues. Due to current driver design for both ice and
idpf, it is not possible to support requests of the same count of Tx and Rx
queues with independent interrupts, (i.e. ethtool -L <IFNAME> rx 15 tx 15)
so such requests are now rejected.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
====================

Link: https://lore.kernel.org/r/20240521-iwl-net-2024-05-14-set-channels-fixes-v2-0-7aa39e2e99f1@intel.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Unlike ice, idpf does not check, if user has requested at least 1 combined
channel. Instead, it relies on a check in the core code. Unfortunately, the
check does not trigger for us because of the hacky .set_channels()
interpretation logic that is not consistent with the core code.

This naturally leads to user being able to trigger a crash with an invalid
input. This is how:

1. ethtool -l <IFNAME> -> combined: 40
2. ethtool -L <IFNAME> rx 0 tx 0
   combined number is not specified, so command becomes {rx_count = 0,
   tx_count = 0, combined_count = 40}.
3. ethnl_set_channels checks, if there is at least 1 RX and 1 TX channel,
   comparing (combined_count + rx_count) and (combined_count + tx_count)
   to zero. Obviously, (40 + 0) is greater than zero, so the core code
   deems the input OK.
4. idpf interprets `rx 0 tx 0` as 0 channels and tries to proceed with such
   configuration.

The issue has to be solved fundamentally, as current logic is also known to
cause AF_XDP problems in ice [0].

Interpret the command in a way that is more consistent with ethtool
manual [1] (--show-channels and --set-channels) and new ice logic.

Considering that in the idpf driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:

ethtool -L <IFNAME> combined 10 /* For symmetric queues */
ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */

[0] https://lore.kernel.org/netdev/20240418095857.2827-1-larysa.zaremba@intel.com/
[1] https://man7.org/linux/man-pages/man8/ethtool.8.html

Fixes: 02cbfba1 ("idpf: add ethtool callbacks")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

A bug occurs because a safety check guarding AF_XDP-related queues in
ethnl_set_channels(), does not trigger. This happens, because kernel and
ice driver interpret the ethtool command differently.

How the bug occurs:
1. ethtool -l <IFNAME> -> combined: 40
2. Attach AF_XDP to queue 30
3. ethtool -L <IFNAME> rx 15 tx 15
   combined number is not specified, so command becomes {rx_count = 15,
   tx_count = 15, combined_count = 40}.
4. ethnl_set_channels checks, if there are any AF_XDP of queues from the
   new (combined_count + rx_count) to the old one, so from 55 to 40, check
   does not trigger.
5. ice interprets `rx 15 tx 15` as 15 combined channels and deletes the
   queue that AF_XDP is attached to.

Interpret the command in a way that is more consistent with ethtool
manual [0] (--show-channels and --set-channels).

Considering that in the ice driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:

ethtool -L <IFNAME> combined 10 /* For symmetric queues */
ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */

[0] https://man7.org/linux/man-pages/man8/ethtool.8.html

Fixes: 87324e74 ("ice: Implement ethtool ops for channels")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently, the late XenStore init protocol is only triggered properly
for the case that HVM_PARAM_STORE_PFN is ~0ULL (invalid). For the
case that XenStore interface is allocated but not ready (the connection
status is not XENSTORE_CONNECTED), Linux should also wait until the
XenStore is set up properly.

Introduce a macro to describe the XenStore interface is ready, use
it in xenbus_probe_initcall() to select the code path of doing the
late XenStore init protocol or not. Since now we have more than one
condition for XenStore late init, rework the check in xenbus_probe()
for the free_irq().

Take the opportunity to enhance the check of the allocated XenStore
interface can be properly mapped, and return error early if the
memremap() fails.

Fixes: 5b335394 ("xen: add support for initializing xenstore later as HVM domain")
Signed-off-by: Henry Wang <xin.wang2@amd.com>
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20240517011516.1451087-1-xin.wang2@amd.comSigned-off-by: Juergen Gross <jgross@suse.com>

When nci_rx_work() receives a zero-length payload packet, it should not
discard the packet and exit the loop. Instead, it should continue
processing subsequent packets.

Fixes: d24b0353 ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet")
Signed-off-by: Ryosuke Yasuoka <ryasuoka@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240521153444.535399-1-ryasuoka@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Christoph reported the following splat:

WARNING: CPU: 1 PID: 772 at net/ipv4/af_inet.c:761 __inet_accept+0x1f4/0x4a0
Modules linked in:
CPU: 1 PID: 772 Comm: syz-executor510 Not tainted 6.9.0-rc7-g7da7119fe22b #56
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:__inet_accept+0x1f4/0x4a0 net/ipv4/af_inet.c:759
Code: 04 38 84 c0 0f 85 87 00 00 00 41 c7 04 24 03 00 00 00 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc e8 ec b7 da fd <0f> 0b e9 7f fe ff ff e8 e0 b7 da fd 0f 0b e9 fe fe ff ff 89 d9 80
RSP: 0018:ffffc90000c2fc58 EFLAGS: 00010293
RAX: ffffffff836bdd14 RBX: 0000000000000000 RCX: ffff888104668000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff836bdb89 R09: fffff52000185f64
R10: dffffc0000000000 R11: fffff52000185f64 R12: dffffc0000000000
R13: 1ffff92000185f98 R14: ffff88810754d880 R15: ffff8881007b7800
FS:  000000001c772880(0000) GS:ffff88811b280000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb9fcf2e178 CR3: 00000001045d2002 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 inet_accept+0x138/0x1d0 net/ipv4/af_inet.c:786
 do_accept+0x435/0x620 net/socket.c:1929
 __sys_accept4_file net/socket.c:1969 [inline]
 __sys_accept4+0x9b/0x110 net/socket.c:1999
 __do_sys_accept net/socket.c:2016 [inline]
 __se_sys_accept net/socket.c:2013 [inline]
 __x64_sys_accept+0x7d/0x90 net/socket.c:2013
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x58/0x100 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x4315f9
Code: fd ff 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 ab b4 fd ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffdb26d9c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002b
RAX: ffffffffffffffda RBX: 0000000000400300 RCX: 00000000004315f9
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000004
RBP: 00000000006e1018 R08: 0000000000400300 R09: 0000000000400300
R10: 0000000000400300 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000040cdf0 R14: 000000000040ce80 R15: 0000000000000055
 </TASK>

The reproducer invokes shutdown() before entering the listener status.
After commit 94062790 ("tcp: defer shutdown(SEND_SHUTDOWN) for
TCP_SYN_RECV sockets"), the above causes the child to reach the accept
syscall in FIN_WAIT1 status.

Eric noted we can relax the existing assertion in __inet_accept()
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/490Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: 94062790 ("tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/23ab880a44d8cfd967e84de8b93dbf48848e3d8c.1716299669.git.pabeni@redhat.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>