- 07 Apr, 2015 9 commits
-
-
Marcel Holtmann authored
The fields h4->rx_state and h4->rx_count are not used at all and with that they can be just removed. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
The h4->rx_skb is not used anymore and with that just remove it. Seems this was a leftover and even the kfree_skb call freeing it is rather pointless since it got never allocated. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
Casting the tty->disc_data to (void *) is not needed at all. So just remove this cast and assign the object without a cast. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
When using vendor detection, this adds support for the Broadcom specific address configuration command. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
When using vendor detection, this adds support for the Intel specific address configuration command. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
This adds a new HCI_UART_VND_DETECT flag to allow automatic vendor detection. This allows to enable known vendor commands (for example for setting the public device address) when using a standard H:4 UART protocol or when running in virtual machines. When this new flag is configured and no vendor specific setup routine is provided, then the local version information are read and the provided manufacturer information can be evaluated to configure extra vendor callbacks. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-04-04 Here's what's probably the last bluetooth-next pull request for 4.1: - Fixes for LE advertising data & advertising parameters - Fix for race condition with HCI_RESET flag - New BNEPGETSUPPFEAT ioctl, needed for certification - New HCI request callback type to get the resulting skb - Cleanups to use BIT() macro wherever possible - Consolidate Broadcom device entries in the btusb HCI driver - Check for valid flags in CMTP, HIDP & BNEP - Disallow local privacy & OOB data combo to prevent a potential race - Expose SMP & ECDH selftest results through debugfs - Expose current Device ID info through debugfs Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Conflicts: drivers/net/ethernet/mellanox/mlx4/cmd.c net/core/fib_rules.c net/ipv4/fib_frontend.c The fib_rules.c and fib_frontend.c conflicts were locking adjustments in 'net' overlapping addition and removal of code in 'net-next'. The mlx4 conflict was a bug fix in 'net' happening in the same place a constant was being replaced with a more suitable macro. Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 06 Apr, 2015 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) In TCP, don't register an FRTO for cumulatively ACK'd data that was previously SACK'd, from Neal Cardwell. 2) Need to hold RNL mutex in ipv4 multicast code namespace cleanup, from Cong WANG. 3) Similarly we have to hold RNL mutex for fib_rules_unregister(), also from Cong WANG. 4) Revert and rework netns nsid allocation fix, from Nicolas Dichtel. 5) When we encapsulate for a tunnel device, skb->sk still points to the user socket. So this leads to cases where we retraverse the ipv4/ipv6 output path with skb->sk being of some other address family (f.e. AF_PACKET). This can cause things to crash since the ipv4 output path is dereferencing an AF_PACKET socket as if it were an ipv4 one. The short term fix for 'net' and -stable is to elide these socket checks once we've entered an encapsulation sequence by testing xmit_recursion. Longer term we have a better solution wherein we pass the tunnel's socket down through the output paths, but that is way too invasive for 'net' and -stable. From Hannes Frederic Sowa. 6) l2tp_init() failure path forgets to unregister per-net ops, from Cong WANG. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net/mlx4_core: Fix error message deprecation for ConnectX-2 cards net: dsa: fix filling routing table from OF description l2tp: unregister l2tp_net_ops on failure path mvneta: dont call mvneta_adjust_link() manually ipv6: protect skb->sk accesses from recursive dereference inside the stack netns: don't allocate an id for dead netns Revert "netns: don't clear nsid too early on removal" ip6mr: call del_timer_sync() in ip6mr_free_table() net: move fib_rules_unregister() under rtnl lock ipv4: take rtnl_lock and mark mrt table as freed on namespace cleanup tcp: fix FRTO undo on cumulative ACK of SACKed range xen-netfront: transmit fully GSO-sized packets
-
Jack Morgenstein authored
Commit 1daa4303 ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug") did the deprecation only for port 1 of the card. Need to deprecate for port 2 as well. Fixes: 1daa4303 ("net/mlx4_core: Deprecate error message at ConnectX-2 cards startup to debug") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Pavel Nakonechny authored
According to description in 'include/net/dsa.h', in cascade switches configurations where there are more than one interconnected devices, 'rtable' array in 'dsa_chip_data' structure is used to indicate which port on this switch should be used to send packets to that are destined for corresponding switch. However, dsa_of_setup_routing_table() fills 'rtable' with port numbers of the _target_ switch, but not current one. This commit removes redundant devicetree parsing and adds needed port number as a function argument. So dsa_of_setup_routing_table() now just looks for target switch number by parsing parent of 'link' device node. To remove possible misunderstandings with the way of determining target switch number, a corresponding comment was added to the source code and to the DSA device tree bindings documentation file. This was tested on a custom board with two Marvell 88E6095 switches with following corresponding routing tables: { -1, 10 } and { 8, -1 }. Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "Updates for the input subsystem - two more tweaks for ALPS driver to work out kinks after splitting the touchpad, trackstick, and potential external PS/2 mouse into separate input devices. Changes to support ALPS SS4 devices (protocol V8) will be coming in 4.1..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - document stick behavior for protocol V2 Input: alps - report V2 Dualpoint Stick events via the right evdev node Input: alps - report interleaved bare PS/2 packets via dev3
-
WANG Cong authored
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael S. Tsirkin authored
commit d631b94e virtio: change comment in transmit started clarifying the logic behind queue state management, but introduced an inaccuracy: TX_BUSY does not cause a BUG message. Clean this up some more, explaining the tradeoffs in detail. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexei Starovoitov authored
Commit 608cd71a ("tc: bpf: generalize pedit action") has added the possibility to mangle packet data to BPF programs in the tc pipeline. This patch adds two helpers bpf_l3_csum_replace() and bpf_l4_csum_replace() for fixing up the protocol checksums after the packet mangling. It also adds 'flags' argument to bpf_skb_store_bytes() helper to avoid unnecessary checksum recomputations when BPF programs adjusting l3/l4 checksums and documents all three helpers in uapi header. Moreover, a sample program is added to show how BPF programs can make use of the mangle and csum helpers. Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Stas Sergeev authored
mvneta_adjust_link() is a callback for of_phy_connect() and should not be called directly. The result of calling it directly is as below: Signed-off-by: David S. Miller <davem@davemloft.net>
-
hannes@stressinduktion.org authored
We should not consult skb->sk for output decisions in xmit recursion levels > 0 in the stack. Otherwise local socket settings could influence the result of e.g. tunnel encapsulation process. ipv6 does not conform with this in three places: 1) ip6_fragment: we do consult ipv6_npinfo for frag_size 2) sk_mc_loop in ipv6 uses skb->sk and checks if we should loop the packet back to the local socket 3) ip6_skb_dst_mtu could query the settings from the user socket and force a wrong MTU Furthermore: In sk_mc_loop we could potentially land in WARN_ON(1) if we use a PF_PACKET socket ontop of an IPv6-backed vxlan device. Reuse xmit_recursion as we are currently only interested in protecting tunnel devices. Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 05 Apr, 2015 3 commits
-
-
Hans de Goede authored
Document that protocol V2 uses standard (bare) PS/2 mouse packets for the DualPoint stick. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-By: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
On V2 devices the DualPoint Stick reports bare packets, these should be reported via the "AlpsPS/2 ALPS DualPoint Stick" dev2 evdev node, which also has the INPUT_PROP_POINTING_STICK propbit set. Note that since there is no way to distinguish these packets from an external PS/2 mouse (insofar as these laptops have an external PS/2 port) this means that we will be reporting PS/2 mouse events via this evdev node too, as we've been doing in kernel 3.19 and older. This has been tested on a Dell Latitude D620 and a Dell Latitude E6400, which both have a V2 touchpad + a DualPoint Stick which reports bare packets. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Hans de Goede authored
Bare packets should be reported via the same evdev device independent on whether they are detected on the beginning of a packet or in the middle of a packet. This has been tested on a Dell Latitude E6400, where the DualPoint Stick reports bare packets, which get reported via dev3 when the touchpad is idle, and via dev2 when the touchpad and stick are used simultaneously. This commit fixes this inconsistency by always reporting bare packets via dev3. Note that since the come from a DualPoint Stick they really should be reported via dev2, this gets fixed in a later commit. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 04 Apr, 2015 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB fixes and new device ids for 4.0-rc6. Nothing major, some xhci fixes for reported problems, and some usb-serial device ids. All have been in linux-next for a while" * tag 'usb-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: ftdi_sio: Use jtag quirk for SNAP Connect E10 usb: isp1760: fix spin unlock in the error path of isp1760_udc_start usb: xhci: apply XHCI_AVOID_BEI quirk to all Intel xHCI controllers usb: xhci: handle Config Error Change (CEC) in xhci driver USB: keyspan_pda: add new device id USB: ftdi_sio: Added custom PID for Synapse Wireless product
-
David S. Miller authored
netfilter: Compress hook function signatures. Currently netfilter hooks have a function signature that is huge and has many arguments. This propagates from the hook entry points down into the individual hook implementations themselves. This means that if, for example, we want to change the type of one of these arguments then we have to touch hundreds of locations. The main initial motivation behind this is that we'd like to change the signature of "okfn" so that a socket pointer can be passed in (and reference counted properly) for the sake of using the proper socket context in the case of tunnels whilst not releasing the top level user socket from skb->sk (and thus releasing it's socket memory quota usage) in order to accomodate this. This also makes it clear who actually uses 'okfn', nf_queue(). It is absolutely critical to make this obvious because any user of 'okfn' down in these hook chains have the be strictly audited for escapability. Specifically, escapability of references to objects outside of the packet processing path. And that's exactly what nf_queue() does via it's packet reinjection framework. In fact this points out a bug in Jiri's original attempt to push the socket pointer down through netfilter's okfn. It didn't grab and drop a reference to the socket in net/netfilter/nf_queue.c as needed. Furthermore, so many code paths are simplified, and should in fact be more efficient because we aren't passing in arguments that often are simply not used by the netfilter hook at all. Further simplifications are probably possible, but this series takes care of the main cases. Unfortunately I couldn't convert ebt_do_table() because ebtables is complete and utter crap and uses ebt_do_table() outside of the hook call chains. But that should not be news to anyone. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging driver fixes from Greg KH: "Here are some staging driver fixes, well, really all just IIO driver fixes, for 4.0-rc6. They fix issues that have been reported with these drivers. All of these patches have been in linux-next for a while" * tag 'staging-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: imu: Use iio_trigger_get for indio_dev->trig assignment iio: adc: vf610: use ADC clock within specification iio/adc/cc10001_adc.c: Fix !HAS_IOMEM build iio: core: Fix double free. iio:inv-mpu6050: Fix inconsistency for the scale channel staging: iio: dummy: Fix undefined symbol build error iio: inv_mpu6050: Clear timestamps fifo while resetting hardware fifo staging: iio: hmc5843: Set iio name property in sysfs iio: bmc150: change sampling frequency iio: fix drivers that check buffer->scan_mask
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are 3 serial driver fixes for 4.0-rc6. They fix some reported issues with the samsung and fsl_lpuart drivers. All have been in linux-next for a while" * tag 'tty-4.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: fsl_lpuart: clear receive flag on FIFO flush tty: serial: fsl_lpuart: specify transmit FIFO size serial: samsung: Clear operation mode on UART shutdown
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Pass the nf_hook_state all the way down into the hook functions themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
That way we don't have to reinstantiate another nf_hook_state on the stack of the nf_reinject() path. Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Instead of passing a large number of arguments down into the nf_hook() entry points, create a structure which carries this state down through the hook processing layers. This makes is so that if we want to change the types or signatures of any of these pieces of state, there are less places that need to be changed. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marcel Holtmann authored
The TX power field in the LE advertising data should be placed last since it needs to be possible to enable kernel controlled TX power, but still allow for userspace provided flags field. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
Marcel Holtmann authored
Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
-
- 03 Apr, 2015 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input subsystem fixes from Dmitry Torokhov: "A fix for ALPS driver for issue introduced in the latest update and a tweak for yet another Lenovo box in Synaptics. There will be more ALPS tweaks coming.." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: define INPUT_PROP_ACCELEROMETER behavior Input: synaptics - fix min-max quirk value for E440 Input: synaptics - add quirk for Thinkpad E440 Input: ALPS - fix max coordinates for v5 and v7 protocols Input: add MT_TOOL_PALM
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block layer fix from Jens Axboe: "Just one patch in this pull request, fixing a regression caused by a 'mathematically correct' change to lcm()" * 'for-linus' of git://git.kernel.dk/linux-block: block: fix blk_stack_limits() regression due to lcm() change
-