- 03 Aug, 2018 4 commits
-
-
Potnuri Bharat Teja authored
To optimize NVME-oF READ IOPs, use a specialized WQE that combines the RDMA WRITE and SEND_INV WR chain submitted by the NVME-oF target driver. This reduces uP overhead per NVME-oF IO, and results in over 10% improvement in NVME-oF 4K READ IOPs. Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Potnuri Bharat Teja authored
Adds iw_cxgb4 functionality to support RDMA_WRITE_WITH_IMMEDATE opcode. Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Dan Carpenter authored
In c4iw_create_qp() there are several struct members which potentially aren't inintialized like uresp.rq_key. I've fixed this code before in in commit ae1fe07f ("RDMA/cxgb4: Fix stack info leak in c4iw_create_qp()") so this time I'm just going to take a big hammer approach and memset the whole struct to zero. Hopefully, it will stay fixed this time. In c4iw_create_srq() we don't clear uresp.reserved. Fixes: 6a0b6174 ("rdma/cxgb4: Add support for kernel mode SRQ's") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Yixian Liu authored
According to IB protocol, there are some cases that work requests must return the flush error completion status through the completion queue. Due to hardware limitation, the driver needs to assist the flush process. This patch adds the support of flush cqe for hip08 in the cases that needed, such as poll cqe, post send, post recv and aeqe handle. The patch also considered the compatibility between kernel and user space. Signed-off-by: Yixian Liu <liuyixian@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
- 01 Aug, 2018 12 commits
-
-
Denis Drozdov authored
The change of ipoib_ah data structure with adding "valid" flag and checks of ah->valid in ipoib_start_xmit affected multicast packet flow. Since the multicast flow doesn't invoke path_rec_start, "ah->valid" flag remains unset, so that ipoib_start_xmit end up with neigh_refresh_path instead of sending the packet using neigh. "ah->valid" has to be set in multicast send flow. As a result IPoIB starts sending packets via neigh immediately and eliminates 60sec delay of neigh keep alive interval. The typical example of this issue are two sequential arpings: arping 11.134.208.9 -> got response (mcast_send) arping 11.134.208.9 -> no response (ah->valid = 0) Fixes: fa9391db ("RDMA/ipoib: Update paths on CLIENT_REREG/SM_CHANGE events") Signed-off-by: Denis Drozdov <denisd@mellanox.com> Reviewed-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
The disassociate function was broken by design because it failed all commands. This prevents userspace from calling destroy on a uobject after it has detected a device fatal error and thus reclaiming the resources in userspace is prevented. This fix is now straightforward, when anything destroys a uobject that is not the user the object remains on the IDR with a NULL context and object pointer. All lookup locking modes other than DESTROY will fail. When the user ultimately calls the destroy function it is simply dropped from the IDR while any related information is returned. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
Now that all the callbacks are safe to run concurrently with disassociation this test can be eliminated. The ufile core infrastructure becomes entirely self contained and is not sensitive to disassociation. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
This does the same as the patch before, except for ioctl. The rules are the same, but for the ioctl methods the core code handles setting up the uobject. - Retrieve the ib_dev from the uobject->context->device. This is safe under ioctl as the core has already done rdma_alloc_begin_uobject and so CREATE calls are entirely protected by the rwsem. - Retrieve the ib_dev from uobject->object - Call ib_uverbs_get_ucontext() Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
This is a step to get rid of the global check for disassociation. In this model, the ib_dev is not proven to be valid by the core code and cannot be provided to the method. Instead, every method decides if it is able to run after disassociation and obtains the ib_dev using one of three different approaches: - Call srcu_dereference on the udevice's ib_dev. As before, this means the method cannot be called after disassociation begins. (eg alloc ucontext) - Retrieve the ib_dev from the ucontext, via ib_uverbs_get_ucontext() - Retrieve the ib_dev from the uobject->object after checking under SRCU if disassociation has started (eg uobj_get) Largely, the code is all ready for this, the main work is to provide a ib_dev after calling uobj_alloc(). The few other places simply use ib_uverbs_get_ucontext() to get the ib_dev. This flexibility will let the next patches allow destroy to operate after disassociation. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
Commands that are reading/writing to objects can test for an ongoing disassociation during their initial call to rdma_lookup_get_uobject. This directly prevents all of these commands from conflicting with an ongoing disassociation. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
After all the recent structural changes this is now straightforward, hold the hw_destroy_rwsem across the entire uobject creation. We already take this semaphore on the success path, so holding it a bit longer is not going to change the performance. After this change none of the create callbacks require the disassociate_srcu lock to be correct. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
After all the recent structural changes this is now straightfoward, hoist the hw_destroy_rwsem up out of rdma_destroy_explicit and wrap it around the uobject write lock as well as the destroy. This is necessary as obtaining a write lock concurrently with uverbs_destroy_ufile_hw() will cause malfunction. After this change none of the destroy callbacks require the disassociate_srcu lock to be correct. This requires introducing a new lookup mode, UVERBS_LOOKUP_DESTROY as the IOCTL interface needs to hold an unlocked kref until all command verification is completed. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
This is more readable, and future patches will need a 3rd lookup type. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
There are several flows that can destroy a uobject and each one is minimized and sprinkled throughout the code base, making it difficult to understand and very hard to modify the destroy path. Consolidate all of these into uverbs_destroy_uobject() and call it in all cases where a uobject has to be destroyed. This makes one change to the lifecycle, during any abort (eg when alloc_commit is not called) we always call out to alloc_abort, even if remove_commit needs to be called to delete a HW object. This also renames RDMA_REMOVE_DURING_CLEANUP to RDMA_REMOVE_ABORT to clarify its actual usage and revises some of the comments to reflect what the life cycle is for the type implementation. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
The ridiculous dance with uobj_remove_commit() is not needed, the write path can follow the same flow as ioctl - lock and destroy the HW object then use the data left over in the uobject to form the response to userspace. Two helpers are introduced to make this flow straightforward for the caller. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jason Gunthorpe authored
The core code will destroy the HW object on behalf of the method, if the method provides an implementation it must simply copy data from the stub uobj into the response. Destroy methods cannot touch the HW object. Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
- 31 Jul, 2018 24 commits
-
-
Kamal Heib authored
The proper return code is "-EOPNOTSUPP" when the modify_cq() callback is not supported, all drivers should generate this and all users should check for it when detecting not supported functionality. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> (for mlx5) Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Bart Van Assche authored
This patch avoids that sparse reports the following warning: drivers/infiniband/hw/cxgb4/qp.c:2269:34: warning: Using plain integer as NULL pointer Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Acked-by: Raju Rangoju <rajur@chelsio.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Bart Van Assche authored
This patch avoids that sparse complains about casts to restricted __be32. Fixes: a3cdaa69 ("cxgb4: Adds CPL support for Shared Receive Queues") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Bart Van Assche authored
This patch avoids that the following warning is reported when building with W=1: drivers/infiniband/hw/cxgb4/cm.c:1860:5: warning: variable 'status' set but not used [-Wunused-but-set-variable] u8 status; ^~~~~~ Fixes: 6a0b6174 ("rdma/cxgb4: Add support for kernel mode SRQ's") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
In rdma cm module, functions which are common between IB and iWarp are named with cma_. iWarp specific functions are prefixed with cma_iw. IB specific functions are perfixed with cma_ib. However some functions in request processing path didn't follow cma_ib notion. Prefix them with _ib for better code clarity. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
cma_add_one() initializes the default GID regardless of device type. listen_id is bound to a device and an IP address, its GID type is initialized by cma_acquire_dev(). Therefore a valid default GID type is always available, it is not needed to check port type during cma_acquire_dev(). Initialize gid type of a cm id when the cm_id is created instead of doing conditional checks during cma_acquire_dev() and trying to initialize to 0 during _cma_attach_to_dev(). Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
In various functions rdma_cm_event is zero initialized on stack using memset() while holding lock which is not necessary. Therefore, don't hold the lock while initializing on stack. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
Return bool for following internal and inline functions as their underlying APIs return bool too. 1. cma_zero_addr() 2. cma_loopback_addr() 3. cma_any_addr() 4. ib_addr_any() 5. ib_addr_loopback() While we are touching cma_loopback_addr(), remove extra white spaces in it. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
Arrange fields of cma_req_info structure for efficiency on stack and get rid of one bit boolean field. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
Constify several pointers such as path_rec, ib_cm_event and listen_id pointers in several functions. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
Following APIs are not supposed to modify addr or dest_addr contents. Therefore make those function argument const for better code readability. 1. rdma_resolve_ip() 2. rdma_addr_size() 3. rdma_resolve_addr() Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
Currently dst address is first set and later on cleared on either of the 3 error conditions are met. However none of the APIs or checks are supposed to refer to the destination address of the cm_id. Therefore, set the destination address after necessary checks pass which simplifies the error flow. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Parav Pandit authored
Currently rdma_cm_id's resource tracking fields such as owner task and kern_name and other non resource tracking fields are initialized in in single function __rdma_create_id(). Therefore, initialize rdma_cm_id's resource type also in same init function. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Lijun Ou authored
This was missed in a few places, and was just using 0. Also correct the spelling of HNS_ROCE_FLOW_LABEL_MASK Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Lijun Ou authored
This patch mainly uses CMD_CSQ_DESC_NUM instead of magic number in order to improve readability. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Lijun Ou authored
Set for ret was missing in the error path here, resulting in incorrect error code for modify_qp. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Lijun Ou authored
This patch mainly fills the correct value into the vlan id field of qp context as well as update the vlan field name according to the latest hardware user manual. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Lijun Ou authored
Only when the IB_QP_AV flag of attr_mask is set is it valid to assign the related fields of the av into the qp context. Signed-off-by: Lijun Ou <oulijun@huawei.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Kamal Heib authored
The rdma core is taking care of return the right error code when the rdma device callbacks aren't supported. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Kamal Heib authored
Make sure the providers implement the verbs callbacks before calling them, otherwise return -EOPNOTSUPP. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Kamal Heib authored
{create,destroy}_ah aren't mandatory verbs, because not all providers are implementing them. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Kamal Heib authored
Make sure to check for "-EOPNOTSUPP" instead of "-ENOSYS" which is the return code from ib_create_srq() in case that it not supported. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Kamal Heib authored
The proper return code is "-EOPNOTSUPP" when the create_srq() callback is not supported. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-
Jack Morgenstein authored
In the current implementation, the driver tries to allocate contiguous memory, and if it fails, it falls back to 4K fragmented allocation. Once the memory is fragmented, the first allocation might take a lot of time, and even fail, which can cause connection failures. This patch changes the logic to always allocate with 4K granularity, since it's more robust and more likely to succeed. This patch was tested with Lustre and no performance degradation was observed. Note: This commit eliminates the "shrinking WQE" feature. This feature depended on using vmap to create a virtually contiguous send WQ. vmap use was abandoned due to problems with several processors (see the commit cited below). As a result, shrinking WQE was available only with physically contiguous send WQs. Allocating such send WQs caused the problems described above. Therefore, as a side effect of eliminating the use of large physically contiguous send WQs, the shrinking WQE feature became unavailable. Warning example: worker/20:1: page allocation failure: order:8, mode:0x80d0 CPU: 20 PID: 513 Comm: kworker/20:1 Tainted: G OE ------------ Workqueue: ib_cm cm_work_handler [ib_cm] Call Trace: [<ffffffff81686d81>] dump_stack+0x19/0x1b [<ffffffff81186160>] warn_alloc_failed+0x110/0x180 [<ffffffff8118a954>] __alloc_pages_nodemask+0x9b4/0xba0 [<ffffffff811ce868>] alloc_pages_current+0x98/0x110 [<ffffffff81184fae>] __get_free_pages+0xe/0x50 [<ffffffff8133f6fe>] swiotlb_alloc_coherent+0x5e/0x150 [<ffffffff81062551>] x86_swiotlb_alloc_coherent+0x41/0x50 [<ffffffffa056b4c4>] mlx4_buf_direct_alloc.isra.7+0xc4/0x180 [mlx4_core] [<ffffffffa056b73b>] mlx4_buf_alloc+0x1bb/0x260 [mlx4_core] [<ffffffffa0b15496>] create_qp_common+0x536/0x1000 [mlx4_ib] [<ffffffff811c6ef7>] ? dma_pool_free+0xa7/0xd0 [<ffffffffa0b163c1>] mlx4_ib_create_qp+0x3b1/0xdc0 [mlx4_ib] [<ffffffffa0b01bc2>] ? mlx4_ib_create_cq+0x2d2/0x430 [mlx4_ib] [<ffffffffa0b21f20>] mlx4_ib_create_qp_wrp+0x10/0x20 [mlx4_ib] [<ffffffffa08f152a>] ib_create_qp+0x7a/0x2f0 [ib_core] [<ffffffffa06205d4>] rdma_create_qp+0x34/0xb0 [rdma_cm] [<ffffffffa08275c9>] kiblnd_create_conn+0xbf9/0x1950 [ko2iblnd] [<ffffffffa074077a>] ? cfs_percpt_unlock+0x1a/0xb0 [libcfs] [<ffffffffa0835519>] kiblnd_passive_connect+0xa99/0x18c0 [ko2iblnd] Fixes: 73898db0 ("net/mlx4: Avoid wrong virtual mappings") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-