In check_pfn_span(), a 'reason' string is being used to recreate the
caller function name, while printing the warning message.  It is really
unnecessary as the warning message could just be printed inside the caller
depending on the return code.  Currently there are just two callers for
check_pfn_span() i.e __add_pages() and __remove_pages().  Let's clean this
up.

Link: https://lkml.kernel.org/r/20220531090441.170650-1-anshuman.khandual@arm.comSigned-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

shmem_swapin_folio has changed to use folio but comment still mentions
page.  Update the relevant comment accordingly as suggested by Naoya.

Link: https://lkml.kernel.org/r/20220530115841.4348-1-linmiaohe@huawei.comSigned-off-by: Miaohe Lin <linmiaohe@huawei.com>
Suggested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

I observed that for each of the shared file-backed page faults, we're very
likely to retry one more time for the 1st write fault upon no page.  It's
because we'll need to release the mmap lock for dirty rate limit purpose
with balance_dirty_pages_ratelimited() (in fault_dirty_shared_page()).

Then after that throttling we return VM_FAULT_RETRY.

We did that probably because VM_FAULT_RETRY is the only way we can return
to the fault handler at that time telling it we've released the mmap lock.

However that's not ideal because it's very likely the fault does not need
to be retried at all since the pgtable was well installed before the
throttling, so the next continuous fault (including taking mmap read lock,
walk the pgtable, etc.) could be in most cases unnecessary.

It's not only slowing down page faults for shared file-backed, but also add
more mmap lock contention which is in most cases not needed at all.

To observe this, one could try to write to some shmem page and look at
"pgfault" value in /proc/vmstat, then we should expect 2 counts for each
shmem write simply because we retried, and vm event "pgfault" will capture
that.

To make it more efficient, add a new VM_FAULT_COMPLETED return code just to
show that we've completed the whole fault and released the lock.  It's also
a hint that we should very possibly not need another fault immediately on
this page because we've just completed it.

This patch provides a ~12% perf boost on my aarch64 test VM with a simple
program sequentially dirtying 400MB shmem file being mmap()ed and these are
the time it needs:

  Before: 650.980 ms (+-1.94%)
  After:  569.396 ms (+-1.38%)

I believe it could help more than that.

We need some special care on GUP and the s390 pgfault handler (for gmap
code before returning from pgfault), the rest changes in the page fault
handlers should be relatively straightforward.

Another thing to mention is that mm_account_fault() does take this new
fault as a generic fault to be accounted, unlike VM_FAULT_RETRY.

I explicitly didn't touch hmm_vma_fault() and break_ksm() because they do
not handle VM_FAULT_RETRY even with existing code, so I'm literally keeping
them as-is.

Link: https://lkml.kernel.org/r/20220530183450.42886-1-peterx@redhat.comSigned-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>	[arm part]
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Will Deacon <will@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Chris Zankel <chris@zankel.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When the number of partial slabs in each cache is the same (e.g., the
value are 0), the results of the `slabinfo -X -N5` and `slabinfo -P -N5`
are different.

/ # slabinfo -X -N5
...
Slabs sorted by number of partial slabs
---------------------------------------
Name                   Objects Objsize           Space Slabs/Part/Cpu  O/S O %Fr %Ef Flg
inode_cache              15180     392         6217728b        758/0/1   20 1   0  95 a
kernfs_node_cache        22494      88         2002944        488/0/1   46 0   0  98
shmem_inode_cache          663     464          319488         38/0/1   17 1   0  96
biovec-max                  50    3072          163840          4/0/1   10 3   0  93 A
dentry                   19050     136         2600960        633/0/2   30 0   0  99 a

/ # slabinfo -P -N5
Name                   Objects Objsize           Space Slabs/Part/Cpu  O/S O %Fr %Ef Flg
bdev_cache                  32     984           32.7K          1/0/1   16 2   0  96 Aa
ext4_inode_cache            42     752           32.7K          1/0/1   21 2   0  96 a
dentry                   19050     136            2.6M        633/0/2   30 0   0  99 a
TCPv6                       17    1840           32.7K          0/0/1   17 3   0  95 A
RAWv6                       18     856           16.3K          0/0/1   18 2   0  94 A

This problem is caused by the sort_slabs().  So let's use alphabetic order
when two values are equal in the sort_slabs().

By the way, the content of the `slabinfo -h` is not aligned because the

`-P|--partial Sort by number of partial slabs`

uses tabs instead of spaces.  So let's use spaces instead of tabs to fix
it.

Link: https://lkml.kernel.org/r/20220528063117.935158-1-songyuanzheng@huawei.com
Fixes: 1106b205 ("tools/vm/slabinfo: add partial slab listing to -X")
Signed-off-by: Yuanzheng Song <songyuanzheng@huawei.com>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

<linux/mm.h> already provides the PAGE_ALIGNED macro.  Let's use this
macro instead of IS_ALIGNED and passing PAGE_SIZE directly.

Link: https://lkml.kernel.org/r/20220526140257.1568744-1-bh1scw@gmail.comSigned-off-by: Fanjun Kong <bh1scw@gmail.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

It seems to exist since the old times and never used once.  Remove them.

Link: https://lkml.kernel.org/r/20220525195220.10241-1-peterx@redhat.comSigned-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Merge tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "Highlights:

   - Fix hp-wmi regression on HP Omen laptops introduced in 5.18

   - Several hardware-id additions

   - A couple of other tiny fixes"

* tag 'platform-drivers-x86-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/intel: hid: Add Surface Go to VGBS allow list
  platform/x86: hp-wmi: Use zero insize parameter only when supported
  platform/x86: hp-wmi: Resolve WMI query failures on some devices
  platform/x86: gigabyte-wmi: Add support for B450M DS3H-CF
  platform/x86: gigabyte-wmi: Add Z690M AORUS ELITE AX DDR4 support
  platform/x86: barco-p50-gpio: Add check for platform_driver_register
  platform/x86/intel: pmc: Support Intel Raptorlake P
  platform/x86/intel: Fix pmt_crashlog array reference
  platform/mellanox: Add static in struct declaration.
  platform/mellanox: Spelling s/platfom/platform/

Pull workqueue fixes from Tejun Heo:
 "Tetsuo's patch to trigger build warnings if system-wide wq's are
  flushed along with a TP type update and trivial comment update"

* tag 'wq-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Switch to new kerneldoc syntax for named variable macro argument
  workqueue: Fix type of cpu in trace event
  workqueue: Wrap flush_workqueue() using a macro

Merge tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Make the *.mod build rule portable for POSIX awk

 - Fix regression of 'make nsdeps'

 - Make scripts/check-local-export working for older bash versions

 - Fix scripts/gdb to extract the .config data from vmlinux

* tag 'kbuild-fixes-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  scripts/gdb: change kernel config dumping method
  scripts/check-local-export: avoid 'wait $!' for process substitution
  scripts/nsdeps: adjust to the format change of *.mod files
  kbuild: avoid regex RS for POSIX awk

Pull cifs client fixes from Steve French:
 "Three reconnect fixes, all for stable as well.

  One of these three reconnect fixes does address a problem with
  multichannel reconnect, but this does not include the additional
  fix (still being tested) for dynamically detecting multichannel
  adapter changes which will improve those reconnect scenarios even
  more"

* tag '5.19-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: populate empty hostnames for extra channels
  cifs: return errors during session setup during reconnects
  cifs: fix reconnect on smb3 mount types

Pull random number generator fixes from Jason Donenfeld:

 - A fix for a 5.19 regression for a case in which early device tree
   initializes the RNG, which flips a static branch.

   On most plaforms, jump labels aren't initialized until much later, so
   this caused splats. On a few mailing list threads, we cooked up easy
   fixes for arm64, arm32, and risc-v. But then things looked slightly
   more involved for xtensa, powerpc, arc, and mips. And at that point,
   when we're patching 7 architectures in a place before the console is
   even available, it seems like the cost/risk just wasn't worth it.

   So random.c works around it now by checking the already exported
   `static_key_initialized` boolean, as though somebody already ran into
   this issue in the past. I'm not super jazzed about that; it'd be
   prettier to not have to complicate downstream code. But I suppose
   it's practical.

 - A few small code nits and adding a missing __init annotation.

 - A change to the default config values to use the cpu and bootloader's
   seeds for initializing the RNG earlier.

   This brings them into line with what all the distros do (Fedora/RHEL,
   Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void... at
   least), and moreover will now give us test coverage in various test
   beds that might have caught the above device tree bug earlier.

 - A change to WireGuard CI's configuration to increase test coverage
   around the RNG.

 - A documentation comment fix to unrelated maintainerless CRC code that
   I was asked to take, I guess because it has to do with polynomials
   (which the RNG thankfully no longer uses).

* tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  wireguard: selftests: use maximum cpu features and allow rng seeding
  random: remove rng_has_arch_random()
  random: credit cpu and bootloader seeds by default
  random: do not use jump labels before they are initialized
  random: account for arch randomness in bits
  random: mark bootloader randomness code as __init
  random: avoid checking crng_ready() twice in random_init()
  crc-itu-t: fix typo in CRC ITU-T polynomial comment

The Surface Go reports Chassis Type 9 (Laptop,) so the device needs to be
added to dmi_vgbs_allow_list to enable tablet mode when an attached Type
Cover is folded back.

BugLink: https://github.com/linux-surface/linux-surface/issues/837Signed-off-by: Duke Lee <krnhotwings@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220607213654.5567-1-krnhotwings@gmail.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

commit be9d73e6 ("platform/x86: hp-wmi: Fix 0x05 error code reported by
several WMI calls") and commit 12b19f14 ("platform/x86: hp-wmi: Fix
hp_wmi_read_int() reporting error (0x05)") cause ACPI BIOS Error (bug):
Attempt to CreateField of length zero (20211217/dsopcode-133) because of
the ACPI method HWMC, which unconditionally creates a Field of
size (insize*8) bits:
	CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN)
In cases where args->insize = 0, the Field size is 0, resulting in
an error.

Fix this by using zero insize only if 0x5 error code is returned

Tested on Omen 15 AMD (2020) board ID: 8786.

Fixes: be9d73e6 ("platform/x86: hp-wmi: Fix 0x05 error code reported by several WMI calls")
Signed-off-by: Bedant Patnaik <bedant.patnaik@gmail.com>
Tested-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://lore.kernel.org/r/41be46743d21c78741232a47bbb5f1cdbcc3d21e.camel@gmail.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

WMI queries fail on some devices where the ACPI method HWMC
unconditionally attempts to create Fields beyond the buffer
if the buffer is too small, this breaks essential features
such as power profiles:

         CreateByteField (Arg1, 0x10, D008)
         CreateByteField (Arg1, 0x11, D009)
         CreateByteField (Arg1, 0x12, D010)
         CreateDWordField (Arg1, 0x10, D032)
         CreateField (Arg1, 0x80, 0x0400, D128)

In cases where args->data had zero length, ACPI BIOS Error
(bug): AE_AML_BUFFER_LIMIT, Field [D008] at bit
offset/length 128/8 exceeds size of target Buffer (128 bits)
(20211217/dsopcode-198) was obtained.

ACPI BIOS Error (bug): AE_AML_BUFFER_LIMIT, Field [D009] at bit
offset/length 136/8 exceeds size of target Buffer (136bits)
(20211217/dsopcode-198)

The original code created a buffer size of 128 bytes regardless if
the WMI call required a smaller buffer or not.  This particular
behavior occurs in older BIOS and reproduced in OMEN laptops.  Newer
BIOS handles buffer sizes properly and meets the latest specification
requirements.  This is the reason why testing with a dynamically
allocated buffer did not uncover any failures with the test systems at
hand.

This patch was tested on several OMEN, Elite, and Zbooks.  It was
confirmed the patch resolves HPWMI_FAN GET/SET calls in an OMEN
Laptop 15-ek0xxx.  No problems were reported when testing on several Elite
and Zbooks notebooks.

Fixes: 4b4967cb ("platform/x86: hp-wmi: Changing bios_args.data to be dynamically allocated")
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220608212923.8585-2-jorge.lopez2@hp.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

The syntax without dots is available since commit 43756e34
("scripts/kernel-doc: Add support for named variable macro arguments").

The same HTML output is produced with and without this patch.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>

Pull gpio fixes from Bartosz Golaszewski:
 "A set of fixes. Most address the new warning we emit at build time
  when irq chips are not immutable with some additional tweaks to
  gpio-crystalcove from Andy and a small tweak to gpio-dwapd.

   - make irq_chip structs immutable in several Diolan and intel drivers
     to get rid of the new warning we emit when fiddling with irq chips

   - don't print error messages on probe deferral in gpio-dwapb"

* tag 'gpio-fixes-for-v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: dwapb: Don't print error on -EPROBE_DEFER
  gpio: dln2: make irq_chip immutable
  gpio: sch: make irq_chip immutable
  gpio: merrifield: make irq_chip immutable
  gpio: wcove: make irq_chip immutable
  gpio: crystalcove: Join function declarations and long lines
  gpio: crystalcove: Use specific type and API for IRQ number
  gpio: crystalcove: make irq_chip immutable

Pull SCSI fixes from James Bottomley:
 "Driver fixes and and one core patch.

  Nine of the driver patches are minor fixes and reworks to lpfc and the
  rest are trivial and minor fixes elsewhere"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: pmcraid: Fix missing resource cleanup in error case
  scsi: ipr: Fix missing/incorrect resource cleanup in error case
  scsi: mpt3sas: Fix out-of-bounds compiler warning
  scsi: lpfc: Update lpfc version to 14.2.0.4
  scsi: lpfc: Allow reduced polling rate for nvme_admin_async_event cmd completion
  scsi: lpfc: Add more logging of cmd and cqe information for aborted NVMe cmds
  scsi: lpfc: Fix port stuck in bypassed state after LIP in PT2PT topology
  scsi: lpfc: Resolve NULL ptr dereference after an ELS LOGO is aborted
  scsi: lpfc: Address NULL pointer dereference after starget_to_rport()
  scsi: lpfc: Resolve some cleanup issues following SLI path refactoring
  scsi: lpfc: Resolve some cleanup issues following abort path refactoring
  scsi: lpfc: Correct BDE type for XMIT_SEQ64_WQE in lpfc_ct_reject_event()
  scsi: vmw_pvscsi: Expand vcpuHint to 16 bits
  scsi: sd: Fix interpretation of VPD B9h length

Pull virtio fixes from Michael Tsirkin:
 "Fixes all over the place, most notably fixes for latent bugs in
  drivers that got exposed by suppressing interrupts before DRIVER_OK,
  which in turn has been done by 8b4ec69d ("virtio: harden vring
  IRQ")"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  um: virt-pci: set device ready in probe()
  vdpa: make get_vq_group and set_group_asid optional
  virtio: Fix all occurences of the "the the" typo
  vduse: Fix NULL pointer dereference on sysfs access
  vringh: Fix loop descriptors check in the indirect cases
  vdpa/mlx5: clean up indenting in handle_ctrl_vlan()
  vdpa/mlx5: fix error code for deleting vlan
  virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed
  vdpa/mlx5: Fix syntax errors in comments
  virtio-rng: make device ready before making request

Merge tag 'loongarch-fixes-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen.
 "Fix build errors and a stale comment"

* tag 'loongarch-fixes-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: Remove MIPS comment about cycle counter
  LoongArch: Fix copy_thread() build errors
  LoongArch: Fix the !CONFIG_SMP build

Commit 6c776766 ("iov_iter: Fix iter_xarray_get_pages{,_alloc}()")
introduced a problem on some 32-bit architectures (at least arm, xtensa,
csky,sparc and mips), that have a 'size_t' that is 'unsigned int'.

The reason is that we now do

    min(nr * PAGE_SIZE - offset, maxsize);

where 'nr' and 'offset' and both 'unsigned int', and PAGE_SIZE is
'unsigned long'.  As a result, the normal C type rules means that the
first argument to 'min()' ends up being 'unsigned long'.

In contrast, 'maxsize' is of type 'size_t'.

Now, 'size_t' and 'unsigned long' are always the same physical type in
the kernel, so you'd think this doesn't matter, and from an actual
arithmetic standpoint it doesn't.

But on 32-bit architectures 'size_t' is commonly 'unsigned int', even if
it could also be 'unsigned long'.  In that situation, both are unsigned
32-bit types, but they are not the *same* type.

And as a result 'min()' will complain about the distinct types (ignore
the "pointer types" part of the error message: that's an artifact of the
way we have made 'min()' check types for being the same):

  lib/iov_iter.c: In function 'iter_xarray_get_pages':
  include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast [-Werror]
     20 |         (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
        |                                   ^~
  lib/iov_iter.c:1464:16: note: in expansion of macro 'min'
   1464 |         return min(nr * PAGE_SIZE - offset, maxsize);
        |                ^~~

This was not visible on 64-bit architectures (where we always define
'size_t' to be 'unsigned long').

Force these cases to use 'min_t(size_t, x, y)' to make the type explicit
and avoid the issue.

[ Nit-picky note: technically 'size_t' doesn't have to match 'unsigned
  long' arithmetically. We've certainly historically seen environments
  with 16-bit address spaces and 32-bit 'unsigned long'.

  Similarly, even in 64-bit modern environments, 'size_t' could be its
  own type distinct from 'unsigned long', even if it were arithmetically
  identical.

  So the above type commentary is only really descriptive of the kernel
  environment, not some kind of universal truth for the kinds of wild
  and crazy situations that are allowed by the C standard ]
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/all/YqRyL2sIqQNDfky2@debian/
Cc: Jeff Layton <jlayton@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

By forcing the maximum CPU that QEMU has available, we expose additional
capabilities, such as the RNDR instruction, which increases test
coverage. This then allows the CI to skip the fake seeding step in some
cases. Also enable STRICT_KERNEL_RWX to catch issues related to early
jump labels when the RNG is initialized at boot.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

MAGIC_START("IKCFG_ST") and MAGIC_END("IKCFG_ED") are moved out
from the kernel_config_data variable.

Thus, we parse kernel_config_data directly instead of considering
offset of MAGIC_START and MAGIC_END.

Fixes: 13610aa9 ("kernel/configs: use .incbin directive to embed config_data.gz")
Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Call virtio_device_ready() to make this driver work after commit
b4ec69d7e09 ("virtio: harden vring IRQ"), since the driver uses the
virtqueues in the probe function.  (The virtio core sets the device
ready when probe returns.)

Fixes: 8b4ec69d ("virtio: harden vring IRQ")
Fixes: 68f5d3f3 ("um: add PCI over virtio emulation driver")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Message-Id: <20220610151203.3492541-1-vincent.whitchurch@axis.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Johannes Berg <johannes@sipsolutions.net>

Pull nfsd fixes from Chuck Lever:
 "Notable changes:

   - There is now a backup maintainer for NFSD

  Notable fixes:

   - Prevent array overruns in svc_rdma_build_writes()

   - Prevent buffer overruns when encoding NFSv3 READDIR results

   - Fix a potential UAF in nfsd_file_put()"

* tag 'nfsd-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Remove pointer type casts from xdr_get_next_encode_buffer()
  SUNRPC: Clean up xdr_get_next_encode_buffer()
  SUNRPC: Clean up xdr_commit_encode()
  SUNRPC: Optimize xdr_reserve_space()
  SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()
  SUNRPC: Trap RDMA segment overflows
  NFSD: Fix potential use-after-free in nfsd_file_put()
  MAINTAINERS: reciprocal co-maintainership for file locking and nfsd

Currently, the secondary channels of a multichannel session
also get hostname populated based on the info in primary channel.
However, this will end up with a wrong resolution of hostname to
IP address during reconnect.

This change fixes this by not populating hostname info for all
secondary channels.

Fixes: 5112d80c ("cifs: populate server_hostname for extra channels")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'for-5.19/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM core's bioset initialization so that blk integrity pool is
   properly setup. Remove now unused bioset_init_from_src.

 - Fix DM zoned hang from locking imbalance due to needless check in
   clone_endio().

* tag 'for-5.19/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: fix zoned locking imbalance due to needless check in clone_endio
  block: remove bioset_init_from_src
  dm: fix bio_set allocation

Pull fscache cleanups from David Howells:

 - fix checker complaint in afs

 - two netfs cleanups:

    - netfs_inode calling convention cleanup plus the requisite
      documentation changes

    -  replace the ->cleanup op with a ->free_request op.

       This is possible as the I/O request is now always available at
       the cleanup point as the stuff to be cleaned up is no longer
       passed into the API functions, but rather obtained by ->init_request.

* 'fscache-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  netfs: Rename the netfs_io_request cleanup op and give it an op pointer
  netfs: Further cleanups after struct netfs_inode wrapper introduced
  afs: Fix some checker issues

Pull iov_iter fix from Al Viro:
 "ITER_XARRAY get_pages fix; now the return value is a lot saner (and
  more similar to logics for other flavours)"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  iov_iter: Fix iter_xarray_get_pages{,_alloc}()

Tested and works on my system.
Signed-off-by: August Wikerfors <git@augustwikerfors.se>
Link: https://lore.kernel.org/r/20220608212028.28307-1-git@augustwikerfors.seSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Add dmi_system_id of Gigabyte Z690M AORUS ELITE AX DDR4 board.
Tested on my PC.
Signed-off-by: Piotr Chmura <chmooreck@gmail.com>
Link: https://lore.kernel.org/r/bd83567e-ebf5-0b31-074b-5f6dc7f7c147@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

As platform_driver_register() could fail, it should be better
to deal with the return value in order to maintain the code
consisitency.

Fixes: 86af1d02 ("platform/x86: Support for EC-connected GPIOs for identify LED/button on Barco P50 board")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Acked-by: Peter Korsgaard <peter.korsgaard@barco.com>
Link: https://lore.kernel.org/r/20220526090345.1444172-1-jiasheng@iscas.ac.cnSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Add Raptorlake P to the list of the platforms that intel_pmc_core driver
supports for pmc_core device. Raptorlake P PCH is based on Alderlake P
PCH.
Signed-off-by: George D Sworo <george.d.sworo@intel.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220602012617.20100-1-george.d.sworo@intel.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

The probe function pmt_crashlog_probe() may incorrectly reference
the 'priv->entry array' as it uses 'i' to reference the array instead
of 'priv->num_entries' as it should.  This is similar to the problem
that was addressed in pmt_telemetry_probe via commit 2cdfa0c2
("platform/x86/intel: Fix 'rmmod pmt_telemetry' panic").

Cc: "David E. Box" <david.e.box@linux.intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David Arcari <darcari@redhat.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20220526203140.339120-1-darcari@redhat.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

Fix problem of missing static in struct declaration.

Fixes: 662f2482 ("platform/mellanox: Add support for new SN2201 system")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Shych <michaelsh@nvidia.com>
Link: https://lore.kernel.org/r/20220602145103.11859-1-michaelsh@nvidia.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>

The maths at the end of iter_xarray_get_pages() to calculate the actual
size doesn't work under some circumstances, such as when it's been asked to
extract a partial single page.  Various terms of the equation cancel out
and you end up with actual == offset.  The same issue exists in
iter_xarray_get_pages_alloc().

Fix these to just use min() to select the lesser amount from between the
amount of page content transcribed into the buffer, minus the offset, and
the size limit specified.

This doesn't appear to have caused a problem yet upstream because network
filesystems aren't getting the pages from an xarray iterator, but rather
passing it directly to the socket, which just iterates over it.  Cachefiles
*does* do DIO from one to/from ext4/xfs/btrfs/etc. but it always asks for
whole pages to be written or read.

Fixes: 7ff50620 ("iov_iter: Add ITER_XARRAY")
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Dominique Martinet <asmadeus@codewreck.org>
cc: Mike Marshall <hubcap@omnibond.com>
cc: Gao Xiang <xiang@kernel.org>
cc: linux-afs@lists.infradead.org
cc: v9fs-developer@lists.sourceforge.net
cc: devel@lists.orangefs.org
cc: linux-erofs@lists.ozlabs.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The netfs_io_request cleanup op is now always in a position to be given a
pointer to a netfs_io_request struct, so this can be passed in instead of
the mapping and private data arguments (both of which are included in the
struct).

So rename the ->cleanup op to ->free_request (to match ->init_request) and
pass in the I/O pointer.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com

Change the signature of netfs helper functions to take a struct netfs_inode
pointer rather than a struct inode pointer where appropriate, thereby
relieving the need for the network filesystem to convert its internal inode
format down to the VFS inode only for netfslib to bounce it back up.  For
type safety, it's better not to do that (and it's less typing too).

Give netfs_write_begin() an extra argument to pass in a pointer to the
netfs_inode struct rather than deriving it internally from the file
pointer.  Note that the ->write_begin() and ->write_end() ops are intended
to be replaced in the future by netfslib code that manages this without the
need to call in twice for each page.

netfs_readpage() and similar are intended to be pointed at directly by the
address_space_operations table, so must stick to the signature dictated by
the function pointers there.

Changes
=======
- Updated the kerneldoc comments and documentation [DH].
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/CAHk-=wgkwKyNmNdKpQkqZ6DnmUL-x9hp0YBnUGjaPFEAdxDTbw@mail.gmail.com/

Remove an unused global variable and make another static as reported by
make C=1.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org

Pull folio fixes from Matthew Wilcox:
 "Four folio-related fixes:

   - Don't release a folio while it's still locked

   - Fix a use-after-free after dropping the mmap_lock

   - Fix a memory leak when splitting a page

   - Fix a kernel-doc warning for struct folio"

* tag 'folio-5.19a' of git://git.infradead.org/users/willy/pagecache:
  mm: Add kernel-doc for folio->mlock_count
  mm/huge_memory: Fix xarray node memory leak
  filemap: Cache the value of vm_flags
  filemap: Don't release a locked folio