On my legacy Pentium M laptop (Acer Extensa 2900) I get bogus MCE on a cold
boot with CONFIG_X86_NEW_MCE enabled, i.e. (after decoding it with mcelog):

MCE 0
HARDWARE ERROR. This is *NOT* a software problem!
Please contact your hardware vendor
CPU 0 BANK 1 MCG status:
MCi status:
Error overflow
Uncorrected error
Error enabled
Processor context corrupt
MCA: Data CACHE Level-1 UNKNOWN Error
STATUS f200000000000195 MCGSTATUS 0

[ The other STATUS values observed: f2000000000001b5 (... UNKNOWN error)
  and f200000000000115 (... READ Error).

  To verify that this is not a CONFIG_X86_NEW_MCE bug I also modified
  the CONFIG_X86_OLD_MCE code (which doesn't log any MCEs) to dump
  content of STATUS MSR before it is cleared during initialization. ]

Since the bogus MCE results in a kernel taint (which in turn disables
lockdep support) don't log boot MCEs on Pentium M (model == 13) CPUs
by default ("mce=bootlog" boot parameter can be be used to get the old
behavior).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Reviewed-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

The Intel x86 architecture right now only supports 32 machine check
banks, more would bump into other MSRs.

So lower the max define to 32.

This only affects a few bitmaps, most data structures are dynamically
sized anyways.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Instead of open coded calculations for bank MSRs hide the indexing of higher
banks MCE register MSRs in new macros.

No semantic changes.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

This addresses one of the leftover review comments.

Move the per bank data into a single structure. This avoids
several separate variables and also separate allocation of sysfs objects.

I didn't move the CMCI ownership information so far because
that would have needed some non trivial changes in the algorithms.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Now that the X86_OLD_MCE ifdefs are gone move some code that
used to be outside the big ifdef to a more natural place
near its user.

No code change.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Drop the CONFIG_X86_NEW_MCE symbol and change all
references to it to check for CONFIG_X86_MCE directly.

No code changes
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

As announced in feature-remove-schedule.txt remove CONFIG_X86_OLD_MCE

This patch only removes code.

The ancient machine check code for very old systems that are not supported
by CONFIG_X86_NEW_MCE is still kept.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

- Clarify that this config controls thermal throttling
reporting too
- Clarify the types of errors reported by machine checks
- Drop references to ancient CPUs.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Add a missing depency for ANCIENT_MCE. It didn't matter
in practice because the ANCIENT code wasn't compiled without
X86_MCE, but it's better to express that clearly in
Kconfig.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Use atomic_inc_return() instead of atomic_add_return() by 1.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Fix comment to match the actual declaration.
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Don't skip removing mce_attrs in route from error2.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

We need a cleared cpu_mask to record if mce is initialized, especially
when MAXSMP is used.

used zalloc_... instead
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

The sysfs attribute cmci_disabled was accidentall turned into a
duplicate of ignore_ce, breaking all other attributes.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Conflicts:
	arch/x86/kernel/cpu/mcheck/mce_intel.c

Merge reason: merge with an urgent-branch MCE fix.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Expand Intel NMI perfctr1 workaround to include a Core2 processor stepping
(cpuid family-6, model-f, stepping-4).  Resolves a situation where the NMI
would not enable on these processors.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: prarit@redhat.com
Cc: suresh.b.siddha@intel.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

mce_intel.c uses apic_write() and lapic_get_maxlvt(), and so it needs
<asm/apic.h>.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>

Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This compiler warning:

  arch/x86/kernel/apic/io_apic.c: In function ‘ioapic_write_entry’:
  arch/x86/kernel/apic/io_apic.c:466: warning: ‘eu’ is used uninitialized in this function
  arch/x86/kernel/apic/io_apic.c:465: note: ‘eu’ was declared here

Is bogus as 'eu' is always initialized. But annotate it away by
initializing the variable, to make it easier for people to notice
real warnings. A compiler that sees through this logic will
optimize away the initialization.
Signed-off-by: Figo.zhang <figo1802@gmail.com>
LKML-Reference: <1245248720.3312.27.camel@myhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

If APIC was disabled (for some reason) and as result
it's not even mapped we should not try to enable thermal
interrupts at all.
Reported-by: Simon Holm Thøgersen <odie@cs.aau.dk>
Tested-by: Simon Holm Thøgersen <odie@cs.aau.dk>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090615182633.GA7606@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Vegard Nossum reported:

> I get an MCE-related crash like this in latest linus tree:
>
> [    0.115341] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> [    0.116396] CPU: L2 Cache: 512K (64 bytes/line)
> [    0.120570] mce: CPU supports 0 MCE banks
> [    0.124870] BUG: unable to handle kernel NULL pointer dereference at 00000000 00000010
> [    0.128001] IP: [<ffffffff813b98ad>] mcheck_init+0x278/0x320
> [    0.128001] PGD 0
> [    0.128001] Thread overran stack, or stack corrupted
> [    0.128001] Oops: 0002 [#1] PREEMPT SMP
> [    0.128001] last sysfs file:
> [    0.128001] CPU 0
> [    0.128001] Modules linked in:
> [    0.128001] Pid: 0, comm: swapper Not tainted 2.6.30 #426
> [    0.128001] RIP: 0010:[<ffffffff813b98ad>]  [<ffffffff813b98ad>] mcheck_init+0x278/0x320
> [    0.128001] RSP: 0018:ffffffff81595e38  EFLAGS: 00000246
> [    0.128001] RAX: 0000000000000010 RBX: ffffffff8158f900 RCX: 0000000000000000
> [    0.128001] RDX: 0000000000000000 RSI: 00000000000000ff RDI: 0000000000000010
> [    0.128001] RBP: ffffffff81595e68 R08: 0000000000000001 R09: 0000000000000000
> [    0.128001] R10: 0000000000000010 R11: 0000000000000000 R12: 0000000000000000
> [    0.128001] R13: 00000000ffffffff R14: 0000000000000000 R15: 0000000000000000
> [    0.128001] FS:  0000000000000000(0000) GS:ffff880002288000(0000) knlGS:00000
> 00000000000
> [    0.128001] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> [    0.128001] CR2: 0000000000000010 CR3: 0000000001001000 CR4: 00000000000006b0
> [    0.128001] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [    0.128001] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000
> [    0.128001] Process swapper (pid: 0, threadinfo ffffffff81594000, task ffffff
> ff8152a4a0)
> [    0.128001] Stack:
> [    0.128001]  0000000081595e68 5aa50ed3b4ddbe6e ffffffff8158f900 ffffffff8158f
> 914
> [    0.128001]  ffffffff8158f948 0000000000000000 ffffffff81595eb8 ffffffff813b8
> 69c
> [    0.128001]  5aa50ed3b4ddbe6e 00000001078bfbfd 0000062300000800 5aa50ed3b4ddb
> e6e
> [    0.128001] Call Trace:
> [    0.128001]  [<ffffffff813b869c>] identify_cpu+0x331/0x392
> [    0.128001]  [<ffffffff815a1445>] identify_boot_cpu+0x23/0x6e
> [    0.128001]  [<ffffffff815a14ac>] check_bugs+0x1c/0x60
> [    0.128001]  [<ffffffff8159c075>] start_kernel+0x403/0x46e
> [    0.128001]  [<ffffffff8159b2ac>] x86_64_start_reservations+0xac/0xd5
> [    0.128001]  [<ffffffff8159b3ea>] x86_64_start_kernel+0x115/0x14b
> [    0.128001]  [<ffffffff8159b140>] ? early_idt_handler+0x0/0x71

This happens on QEMU which reports MCA capability, but no banks.
Without this patch there is a buffer overrun and boot ops because
the code would try to initialize the 0 element of a zero length
kmalloc() buffer.
Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Tested-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <20090615125200.GD31969@one.firstfloor.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: pull in latest to fix a bug in it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Use .code16gcc to compile arch/x86/boot/bioscall.S rather than
.code16, since some older versions of binutils can't generate 32-bit
addressing expressions (67 prefixes) in .code16 mode, only in
.code16gcc mode.
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

This patch causes all the EFI_RESERVED_TYPE memory reservations to be recorded
in the e820 table as type E820_RESERVED.

(This patch replaces one called 'x86: vendor reserved memory type'.
 This version has been discussed a bit with Peter and Yinghai but not given
 a final opinion.)

Without this patch EFI_RESERVED_TYPE memory reservations may be
marked usable in the e820 table. There may be a collision between
kernel use and some reserver's use of this memory.

(An example use of this functionality is the UV system, which
 will access extremely large areas of memory with a memory engine
 that allows a user to address beyond the processor's range.  Such
 areas are reserved in the EFI table by the BIOS.
 Some loaders have a restricted number of entries possible in the e820 table,
 hence the need to record the reservations in the unrestricted EFI table.)

The call to do_add_efi_memmap() is only made if "add_efi_memmap" is specified
on the kernel command line.
Signed-off-by: Cliff Wickman <cpw@sgi.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

iomem_resource is by default initialized to -1, which means 64 bits of
physical address space if 64-bit resources are enabled.  However, x86
CPUs cannot address 64 bits of physical address space.  Thus, we want
to cap the physical address space to what the union of all CPU can
actually address.

Without this patch, we may end up assigning inaccessible values to
uninitialized 64-bit PCI memory resources.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Martin Mares <mj@ucw.cz>
Cc: stable@kernel.org

Rename files that are no longer 64bit specific:
	mce_amd_64.c	=> mce_amd.c
	mce_intel_64.c	=> mce_intel.c
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Reorder definitions.

 - static inline dummy mcheck_init() for !CONFIG_X86_MCE
 - gather defs for exception, threshold handler
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Now all symbols in the header are static.  Remove the header.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

and make intel_thermal_interrupt() static.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

move intel_init_thermal() into therm_throt.c
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Put common functions into therm_throt.c, modify Makefile.

	unexpected_thermal_interrupt
	intel_thermal_interrupt
	smp_thermal_interrupt
	intel_set_thermal_handler
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Let them in same shape.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Break smp_thermal_interrupt() into two functions.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Remove unused argument regs from handlers, and use inc_irq_stat.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

The mce_disabled on 32bit is a tristate variable [1,0,-1],
while 64bit version is boolean [0,1].
This patch makes mce_disabled always boolean, and use mce_p5_enabled
to indicate the third state instead.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

There are 2 headers:
	arch/x86/include/asm/mce.h
	arch/x86/kernel/cpu/mcheck/mce.h
and in the latter small header:
	#include <asm/mce.h>

This patch move all contents in the latter header into the former,
and fix all files using the latter to include the former instead.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Add sysfs interface for admins who want to tweak these options without
rebooting the system.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

"trigger" is not straight forward name for valiable that holds name
of user mode helper program which triggered by machine check events.

This patch renames this valiable and kins to more recognizable names.

	trigger		=> mce_helper
	trigger_argv	=> mce_helper_argv
	notify_user	=> mce_need_notify

No functional changes.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Add __read_mostly to data written during setup.
Suggested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>

Simplify interface of mce_start():

-       no_way_out = mce_start(no_way_out, &order);
+       order = mce_start(&no_way_out);

Now Monarch and Subjects share same exit(return) in usual path.
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>