- 25 Mar, 2020 12 commits
-
-
Chen Zhou authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/pci/hotplug/rpaphp_core.c: In function is_php_type: drivers/pci/hotplug/rpaphp_core.c:291:16: warning: variable value set but not used [-Wunused-but-set-variable] Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Acked-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200312140412.32373-1-chenzhou10@huawei.com
-
Christophe Leroy authored
Reorder Linux PTE bits to (almost) match Hash PTE bits. RW Kernel : PP = 00 RO Kernel : PP = 00 RW User : PP = 01 RO User : PP = 11 So naturally, we should have _PAGE_USER = 0x001 _PAGE_RW = 0x002 Today 0x001 and 0x002 and _PAGE_PRESENT and _PAGE_HASHPTE which both are software only bits. Switch _PAGE_USER and _PAGE_PRESET Switch _PAGE_RW and _PAGE_HASHPTE This allows to remove a few insns. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
-
Christophe Leroy authored
At the moment kasan_remap_early_shadow_ro() does nothing, because k_end is 0 and k_cur < 0 is always true. Change the test to k_cur != k_end, as done in kasan_init_shadow_page_tables() Signed-off-by:
-
Christophe Leroy authored
At the time being we have something like if (something) { p = get(); if (p) { if (something_wrong) goto out; ... return; } else if (a != b) { if (some_error) goto out; ... } goto out; } p = get(); if (!p) { if (a != b) { if (some_error) goto out; ... } goto out; } This is similar to p = get(); if (!p) { if (a != b) { if (some_error) goto out; ... } goto out; } if (something) { if (something_wrong) goto out; ... return; } Signed-off-by: -
Michael Ellerman authored
We currently have two section mismatch warnings: The function __boot_from_prom() references the function __init prom_init(). The function start_here_common() references the function __init start_kernel(). The warnings are correct, we do have branches from non-init code into init code, which is freed after boot. But we don't expect to ever execute any of that early boot code after boot, if we did that would be a bug. In particular calling into OF after boot would be fatal because OF is no longer resident. So for now fix the warnings by marking the relevant functions as __REF, which puts them in the ".ref.text" section. This causes some reordering of the functions in the final link: @@ -217,10 +217,9 @@ c00000000000b088 t generic_secondary_common_init c00000000000b124 t __mmu_off c00000000000b14c t __start_initialization_multiplatform -c00000000000b1ac t __boot_from_prom -c00000000000b1ec t __after_prom_start -c00000000000b260 t p_end -c00000000000b27c T copy_and_flush +c00000000000b1ac t __after_prom_start +c00000000000b220 t p_end +c00000000000b23c T copy_and_flush c00000000000b300 T __secondary_start c00000000000b300 t copy_to_here c00000000000b344 t start_secondary_prolog @@ -228,8 +227,9 @@ c00000000000b36c t enable_64b_mode c00000000000b388 T relative_toc c00000000000b3a8 t p_toc -c00000000000b3b0 t start_here_common -c00000000000b3d0 t start_here_multiplatform +c00000000000b3b0 t __boot_from_prom +c00000000000b3f0 t start_here_multiplatform +c00000000000b480 t start_here_common c00000000000b880 T system_call_common c00000000000b974 t system_call c00000000000b9dc t system_call_exit In particular __boot_from_prom moves after copy_to_here, which means it's not copied to zero in the first stage of copy of the kernel to zero. But that's OK, because we only call __boot_from_prom before we do the copy, so it makes no difference when it's copied. The call sequence is: __start -> __start_initialization_multiplatform -> __boot_from_prom -> __start -> __start_initialization_multiplatform -> __after_prom_start -> copy_and_flush -> copy_and_flush (relocated to 0) -> start_here_multiplatform -> early_setup Reported-by:Mauricio Faria de Oliveira <mauricfo@linux.ibm.com> Reported-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
-
Michael Ellerman authored
In xmon we have two variables that are used by the dump commands. There's ndump which is the number of bytes to dump using 'd', and nidump which is the number of instructions to dump using 'di'. ndump starts as 64 and nidump starts as 16, but both can be set by the user. It's fairly common to be pasting addresses into xmon when trying to debug something, and if you inadvertently double paste an address like so: 0:mon> di c000000002101f6c c000000002101f6c The second value is interpreted as the number of instructions to dump. Luckily it doesn't dump 13 quintrillion instructions, the value is limited to MAX_DUMP (128K). But as each instruction is dumped on a single line, that's still a lot of output. If you're on a slow console that can take multiple minutes to print. If you were "just popping in and out of xmon quickly before the RCU/hardlockup detector fires" you are now having a bad day. Things are not as bad with 'd' because we print 16 bytes per line, so it's fewer lines. But it's still quite a lot. So shrink the maximum for 'd' to 64K (one page), which is 4096 lines. For 'di' add a new limit which is the above / 4 - because instructions are 4 bytes, meaning again we can dump one page. Signed-off-by:
-
Alexey Kardashevskiy authored
The "os-term" RTAS calls has one argument with a message address of OS termination cause. rtas_os_term() already passes it but the recently added prom_init's version of that missed it; it also does not fill args correctly. This passes the message address and initializes the number of arguments. Fixes: 6a9c930b ("powerpc/prom_init: Add the ESM call to prom_init") Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
afzal mohammed authored
request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanosSigned-off-by:
afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by:
-
Joe Perches authored
Convert the various uses of fallthrough comments to fallthrough; Signed-off-by:
Joe Perches <joe@perches.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Balamuruhan S authored
ld instruction should have 14 bit immediate field (DS) concatenated with 0b00 on the right, encode it accordingly. Introduce macro `IMM_DS()` to encode DS form instructions with 14 bit immediate field. Fixes: 4ceae137 ("powerpc: emulate_step() tests for load/store instructions") Reviewed-by:
Sandipan Das <sandipan@linux.ibm.com> Signed-off-by:
Balamuruhan S <bala24@linux.ibm.com> Signed-off-by:
-
Tyrel Datwyler authored
The expectation is that when calling of_read_drc_info_cell() repeatedly to parse multiple drc-info records that the in/out curval parameter points at the start of the next record on return. However, the current behavior has curval still pointing at the final value of the record just parsed. The result of which is that if the ibm,drc-info property contains multiple properties the parsed value of the drc_type for any record after the first has the power_domain value of the previous record appended to the type string. eg: observed the following 0xffffffff prepended to PHB drc-info: type: \xff\xff\xff\xffPHB, prefix: PHB , index_start: 0x20000001 drc-info: suffix_start: 1, sequential_elems: 3072, sequential_inc: 1 drc-info: power-domain: 0xffffffff, last_index: 0x20000c00 In practice PHBs are the only type of connector in the ibm,drc-info property that has multiple records. So, it breaks PHB hotplug, but by chance not PCI, CPU, slot, or memory because they happen to only ever be a single record. Fix by incrementing curval past the power_domain value to point at drc_type string of next record. Fixes: e83636ac ("pseries/drc-info: Search DRC properties for CPU indexes") Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Acked-by:
Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by:
-
Gustavo Luiz Duarte authored
The test case tm-signal-context-force-tm expects a segfault to happen on returning from signal handler, and then does a setcontext() to run the test again. However, the test doesn't always segfault, causing the test to run a single time. This patch fixes the test by putting it within a loop and jumping, via setcontext, just prior to the loop in case it segfaults. This way we get the desired behavior (run the test COUNT_MAX times) regardless if it segfaults or not. This also reduces the use of setcontext for control flow logic, keeping it only in the segfault handler. Also, since 'count' is changed within the signal handler, it is declared as volatile to prevent any compiler optimization getting confused with asynchronous changes. Signed-off-by:
Gustavo Luiz Duarte <gustavold@linux.ibm.com> Signed-off-by:
-
- 20 Mar, 2020 3 commits
-
-
Gustavo Luiz Duarte authored
This test triggers a TM Bad Thing by raising a signal in transactional state and forcing a pagefault to happen in kernelspace when the kernel signal handling code first touches the user signal stack. This is inspired by the test tm-signal-context-force-tm but uses userfaultfd to make the test deterministic. While this test always triggers the bug in one run, I had to execute tm-signal-context-force-tm several times (the test runs 5000 times each execution) to trigger the same bug. tm-signal-context-force-tm is kept instead of replaced because, while this test is more reliable and triggers the same bug, tm-signal-context-force-tm has a better coverage, in the sense that by running the test several times it might trigger the pagefault and/or be preempted at different places. v3: skip test if userfaultfd is unavailable. Signed-off-by:
-
Michael Ellerman authored
Currently you can enable PPC_KUAP_DEBUG when PPC_KUAP is disabled, even though the former has not effect without the latter. Fix it so that PPC_KUAP_DEBUG can only be enabled when PPC_KUAP is enabled, not when the platform could support KUAP (PPC_HAVE_KUAP). Fixes: 890274c2 ("powerpc/64s: Implement KUAP for Radix MMU") Signed-off-by:
-
Michael Ellerman authored
There's two different paths through the sigreturn code, depending on whether the VDSO is mapped or not. We recently discovered a bug in the unmapped case, because it's not commonly used these days. So add a test that sends itself a signal, then moves the VDSO, takes another signal and finally unmaps the VDSO before sending itself another signal. That tests the standard signal path, the code that handles the VDSO being moved, and also the signal path in the case where the VDSO is unmapped. Signed-off-by:
-
- 17 Mar, 2020 7 commits
-
-
Nicholas Piggin authored
We should be checking that the instruction was stepped *and* that the target register has the right value. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Reviewed-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> [mpe: Write change log] Signed-off-by:
-
Nicholas Piggin authored
Signed-off-by:
-
Christophe Leroy authored
The commit identified below added tlbie_test but forgot to add it in .gitignore. Fixes: 93cad5f7 ("selftests/powerpc: Add test case for tlbie vs mtpidr ordering issue") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by:
-
YueHaibing authored
core99_l2_cache/core99_l3_cache do not need to be marked as volatile, remove it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Ilie Halip authored
When building with ppc64_defconfig, the compiler reports that these 2 variables are not used: warning: unused variable 'core99_l2_cache' [-Wunused-variable] warning: unused variable 'core99_l3_cache' [-Wunused-variable] They are only used when CONFIG_PPC64 is not defined. Move them into a section which does the same macro check. Reported-by:Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Ilie Halip <ilie.halip@gmail.com> [mpe: Move them into core99_init_caches() which is their only user] Signed-off-by:
-
Laurentiu Tudor authored
In the current implementation, the call to loadcam_multi() is wrapped between switch_to_as1() and restore_to_as0() calls so, when it tries to create its own temporary AS=1 TLB1 entry, it ends up duplicating the existing one created by switch_to_as1(). Add a check to skip creating the temporary entry if already running in AS=1. Fixes: d9e1831a ("powerpc/85xx: Load all early TLB entries at once") Cc: stable@vger.kernel.org # v4.4+ Signed-off-by:
Laurentiu Tudor <laurentiu.tudor@nxp.com> Acked-by:
Scott Wood <oss@buserror.net> Signed-off-by:
-
Stephen Rothwell authored
ev_byte_channel_send() assumes that its third argument is a 16 byte array. Some places where it is called it may not be (or we can't easily tell if it is). Newer compilers have started producing warnings about this, so make sure we actually pass a 16 byte array. There may be more elegant solutions to this, but the driver is quite old and hasn't been updated in many years. The warnings (from a powerpc allyesconfig build) are: In file included from include/linux/byteorder/big_endian.h:5, from arch/powerpc/include/uapi/asm/byteorder.h:14, from include/asm-generic/bitops/le.h:6, from arch/powerpc/include/asm/bitops.h:250, from include/linux/bitops.h:29, from include/linux/kernel.h:12, from include/asm-generic/bug.h:19, from arch/powerpc/include/asm/bug.h:109, from include/linux/bug.h:5, from include/linux/mmdebug.h:5, from include/linux/gfp.h:5, from include/linux/slab.h:15, from drivers/tty/ehv_bytechan.c:24: drivers/tty/ehv_bytechan.c: In function ‘ehv_bc_udbg_putc’: arch/powerpc/include/asm/epapr_hcalls.h:298:20: warning: array subscript 1 is outside array bounds of ‘const char[1]’ [-Warray-bounds] 298 | r6 = be32_to_cpu(p[1]); include/uapi/linux/byteorder/big_endian.h:40:51: note: in definition of macro ‘__be32_to_cpu’ 40 | #define __be32_to_cpu(x) ((__force __u32)(__be32)(x)) | ^ arch/powerpc/include/asm/epapr_hcalls.h:298:7: note: in expansion of macro ‘be32_to_cpu’ 298 | r6 = be32_to_cpu(p[1]); | ^~~~~~~~~~~ drivers/tty/ehv_bytechan.c:166:13: note: while referencing ‘data’ 166 | static void ehv_bc_udbg_putc(char c) | ^~~~~~~~~~~~~~~~ Fixes: dcd83aaf ("tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver") Signed-off-by:Stephen Rothwell <sfr@canb.auug.org.au> Tested-by:
-
- 13 Mar, 2020 4 commits
-
-
Oliver O'Halloran authored
The PowerNV cpufreq driver registers two notifiers: one to catch throttle messages from the OCC and one to bump the CPU frequency back to normal before a reboot. Both require the cpufreq driver to be registered in order to function since the notifier callbacks use various cpufreq_*() functions. Right now we register both notifiers before we've initialised the driver. This seems to work, but we should head off any protential problems by registering the notifiers after the driver is initialised. Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Oliver O'Halloran authored
The cpufreq driver has a use-after-free that we can hit if: a) There's an OCC message pending when the notifier is registered, and b) The cpufreq driver fails to register with the core. When a) occurs the notifier schedules a workqueue item to handle the message. The backing work_struct is located on chips[].throttle and when b) happens we clean up by freeing the array. Once we get to the (now free) queued item and the kernel crashes. Fixes: c5e29ea7 ("cpufreq: powernv: Fix bugs in powernv_cpufreq_{init/exit}") Cc: stable@vger.kernel.org # v4.6+ Signed-off-by:
-
Joe Lawrence authored
The original 2005 patch that introduced the powerpc vdso, pre-git ("ppc64: Implement a vDSO and use it for signal trampoline") notes that: ... symbols exposed by the vDSO aren't "normal" function symbols, apps can't be expected to link against them directly, the vDSO's are both seen as if they were linked at 0 and the symbols just contain offsets to the various functions. This is done on purpose to avoid a relocation step (ppc64 functions normally have descriptors with abs addresses in them). When glibc uses those functions, it's expected to use it's own trampolines that know how to reach them. Despite that explanation, there remains dead #ifdef VDS64_HAS_DESCRIPTORS code-blocks that provide alternate function definitions that setup function descriptors. Since VDS64_HAS_DESCRIPTORS has been unused for all these years, we might as well finally remove it from the codebase. Signed-off-by:Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by:
-
Christophe Leroy authored
Commit 2efc7c08 ("powerpc/32: drop get_pteptr()"), replaced get_pteptr() by virt_to_kpte(). But virt_to_kpte() lacks a NULL pmd check and returns an invalid non NULL pointer when there is no page table. Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Fixes: 2efc7c08 ("powerpc/32: drop get_pteptr()") Signed-off-by:
-
- 10 Mar, 2020 1 commit
-
-
Michael Ellerman authored
Merge in our fixes branch. In particular we want to merge the TM and KUAP fixes, so we can add selftests for them in next.
-
- 05 Mar, 2020 1 commit
-
-
Michael Ellerman authored
Stefan reported a strange kernel fault which turned out to be due to a missing KUAP disable in flush_coherent_icache() called from flush_icache_range(). The fault looks like: Kernel attempted to access user page (7fffc30d9c00) - exploit attempt? (uid: 1009) BUG: Unable to handle kernel data access on read at 0x7fffc30d9c00 Faulting instruction address: 0xc00000000007232c Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV CPU: 35 PID: 5886 Comm: sigtramp Not tainted 5.6.0-rc2-gcc-8.2.0-00003-gfc37a163 #79 NIP: c00000000007232c LR: c00000000003b7fc CTR: 0000000000000000 REGS: c000001e11093940 TRAP: 0300 Not tainted (5.6.0-rc2-gcc-8.2.0-00003-gfc37a163) MSR: 900000000280b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28000884 XER: 00000000 CFAR: c0000000000722fc DAR: 00007fffc30d9c00 DSISR: 08000000 IRQMASK: 0 GPR00: c00000000003b7fc c000001e11093bd0 c0000000023ac200 00007fffc30d9c00 GPR04: 00007fffc30d9c18 0000000000000000 c000001e11093bd4 0000000000000000 GPR08: 0000000000000000 0000000000000001 0000000000000000 c000001e1104ed80 GPR12: 0000000000000000 c000001fff6ab380 c0000000016be2d0 4000000000000000 GPR16: c000000000000000 bfffffffffffffff 0000000000000000 0000000000000000 GPR20: 00007fffc30d9c00 00007fffc30d8f58 00007fffc30d9c18 00007fffc30d9c20 GPR24: 00007fffc30d9c18 0000000000000000 c000001e11093d90 c000001e1104ed80 GPR28: c000001e11093e90 0000000000000000 c0000000023d9d18 00007fffc30d9c00 NIP flush_icache_range+0x5c/0x80 LR handle_rt_signal64+0x95c/0xc2c Call Trace: 0xc000001e11093d90 (unreliable) handle_rt_signal64+0x93c/0xc2c do_notify_resume+0x310/0x430 ret_from_except_lite+0x70/0x74 Instruction dump: 409e002c 7c0802a6 3c62ff31 3863f6a0 f8010080 48195fed 60000000 48fe4c8d 60000000 e8010080 7c0803a6 7c0004ac <7c00ffac> 7c0004ac 4c00012c 38210070 This path through handle_rt_signal64() to setup_trampoline() and flush_icache_range() is only triggered by 64-bit processes that have unmapped their VDSO, which is rare. flush_icache_range() takes a range of addresses to flush. In flush_coherent_icache() we implement an optimisation for CPUs where we know we don't actually have to flush the whole range, we just need to do a single icbi. However we still execute the icbi on the user address of the start of the range we're flushing. On CPUs that also implement KUAP (Power9) that leads to the spurious fault above. We should be able to pass any address, including a kernel address, to the icbi on these CPUs, which would avoid any interaction with KUAP. But I don't want to make that change in a bug fix, just in case it surfaces some strange behaviour on some CPU. So for now just disable KUAP around the icbi. Note the icbi is treated as a load, so we allow read access, not write as you'd expect. Fixes: 890274c2 ("powerpc/64s: Implement KUAP for Radix MMU") Cc: stable@vger.kernel.org # v5.2+ Reported-by:
Stefan Berger <stefanb@linux.ibm.com> Signed-off-by:
-
- 04 Mar, 2020 12 commits
-
-
Srikar Dronamraju authored
With commit ("powerpc/numa: Early request for home node associativity"), commit 2ea62630 ("powerpc/topology: Get topology for shared processors at boot") which was requesting home node associativity becomes redundant. Hence remove the late request for home node associativity. Signed-off-by:Srikar Dronamraju <srikar@linux.vnet.ibm.com> Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Reviewed-by:
-
Srikar Dronamraju authored
Currently the kernel detects if its running on a shared lpar platform and requests home node associativity before the scheduler sched_domains are setup. However between the time NUMA setup is initialized and the request for home node associativity, workqueue initializes its per node cpumask. The per node workqueue possible cpumask may turn invalid after home node associativity resulting in weird situations like workqueue possible cpumask being a subset of workqueue online cpumask. This can be fixed by requesting home node associativity earlier just before NUMA setup. However at the NUMA setup time, kernel may not be in a position to detect if its running on a shared lpar platform. So request for home node associativity and if the request fails, fallback on the device tree property. Signed-off-by:
-
Srikar Dronamraju authored
All the sibling threads of a core have to be part of the same node. To ensure that all the sibling threads map to the same node, always lookup/update the cpu-to-node map of the first thread in the core. Signed-off-by:
-
Srikar Dronamraju authored
Currently code handles H_FUNCTION, H_SUCCESS, H_HARDWARE return codes. However hcall_vphn can return other return codes. Now it also handles H_PARAMETER return code. Also the rest return codes are handled under the default case. Signed-off-by:
-
Srikar Dronamraju authored
There is no value in unpacking associativity, if H_HOME_NODE_ASSOCIATIVITY hcall has returned an error. Signed-off-by:
-
Srikar Dronamraju authored
package_id is to match cores that are part of the same chip. On PowerNV machines, package_id defaults to chip_id. However ibm,chip_id property is not present in device-tree of PowerVM LPARs. Hence lscpu output shows one core per socket and multiple cores. To overcome this, use nid as the package_id on PowerVM LPARs. Before the patch: Architecture: ppc64le Byte Order: Little Endian CPU(s): 128 On-line CPU(s) list: 0-127 Thread(s) per core: 8 Core(s) per socket: 1 <---------------------- Socket(s): 16 <---------------------- NUMA node(s): 2 Model: 2.2 (pvr 004e 0202) Model name: POWER9 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 32K L1i cache: 32K L2 cache: 512K L3 cache: 10240K NUMA node0 CPU(s): 0-63 NUMA node1 CPU(s): 64-127 # # cat /sys/devices/system/cpu/cpu0/topology/physical_package_id -1 After the patch: Architecture: ppc64le Byte Order: Little Endian CPU(s): 128 On-line CPU(s) list: 0-127 Thread(s) per core: 8 <--------------------- Core(s) per socket: 8 <--------------------- Socket(s): 2 NUMA node(s): 2 Model: 2.2 (pvr 004e 0202) Model name: POWER9 (architected), altivec supported Hypervisor vendor: pHyp Virtualization type: para L1d cache: 32K L1i cache: 32K L2 cache: 512K L3 cache: 10240K NUMA node0 CPU(s): 0-63 NUMA node1 CPU(s): 64-127 # # cat /sys/devices/system/cpu/cpu0/topology/physical_package_id 0 Now lscpu output is more in line with the system configuration. Signed-off-by:
-
Christophe Leroy authored
Until commit 7306e83c ("powerpc: Don't use CURRENT_THREAD_INFO to find the stack"), the current stack base address was obtained by calling current_thread_info(). That inline function was simply masking out the value of r1. In that commit, it was changed to using current_stack_pointer() (since renamed current_stack_frame()), which is a heavier function as it is an outline assembly function which cannot be inlined and which reads the content of the stack at 0(r1). Convert to using current_stack_pointer for geting r1 and masking out its value to obtain the base address of the stack pointer as before. Fixes: 7306e83c ("powerpc: Don't use CURRENT_THREAD_INFO to find the stack") Signed-off-by:
-
Christophe Leroy authored
Instead of #ifdef, use IS_ENABLED(CONFIG_DEBUG_STACKOVERFLOW). This enable GCC to check for code validity even when the option is not selected. Signed-off-by:
-
Christophe Leroy authored
The purpose of check_stack_overflow() is to verify that the stack has not overflowed. To really know whether the stack pointer is still within boundaries, the check must be done directly on the value of r1. So use current_stack_pointer, which returns the current value of r1, rather than current_stack_frame() which causes a frame to be created and then returns that value. Signed-off-by:
-
Christophe Leroy authored
current_stack_frame() doesn't return the stack pointer, but the caller's stack frame. See commit bfe9a2cf ("powerpc: Reimplement __get_SP() as a function not a define") and commit acf620ec ("powerpc: Rename __get_SP() to current_stack_pointer()") for details. In some cases this is overkill or incorrect, as it doesn't return the current value of r1. So add a current_stack_pointer register global to get the value of r1 directly. Signed-off-by:
-
Michael Ellerman authored
current_stack_pointer(), which was called __get_SP(), used to just return the value in r1. But that caused problems in some cases, so it was turned into a function in commit bfe9a2cf ("powerpc: Reimplement __get_SP() as a function not a define"). Because it's a function in a separate compilation unit to all its callers, it has the effect of causing a stack frame to be created, and then returns the address of that frame. This is good in some cases like those described in the above commit, but in other cases it's overkill, we just need to know what stack page we're on. On some other arches current_stack_pointer is just a register global giving the stack pointer, and we'd like to do that too. So rename our current_stack_pointer() to current_stack_frame() to make that possible. Signed-off-by:
-
Kajol Jain authored
Many of the performance monitoring unit (PMU) SPRs are exposed in the sysfs. This may not be a desirable since "perf" API is the primary interface to program PMU and collect counter data in the system. But that said, we cant remove these sysfs files since we dont whether anyone/anything is using them. So the patch adds a new CONFIG option 'CONFIG_PMU_SYSFS' (user selectable) to be used in sysfs file creation for PMU SPRs. New option by default is disabled, but can be enabled if user needs it. Tested this patch behaviour in powernv and pseries machines. Patch is also tested for pmac32_defconfig. Signed-off-by:
Kajol Jain <kjain@linux.ibm.com> Tested-by:
Nageswara R Sastry <nasastry@in.ibm.com> Signed-off-by:
-
