- 03 Sep, 2020 19 commits
-
-
Russell King authored
Convert mvpp2 to phylink's new pcs support. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Russell King authored
Move the GMAC reset handling into mac_prepare() / mac_finish() Signed-off-by:
-
Russell King authored
Ensure that the port is forced down while reconfiguring, controlling this via mac_prepare() and mac_finish() so that it is down while we are configuring our (future) PCS. Signed-off-by:
-
Russell King authored
Convert mvpp2 to use the mac_prepare() and mac_finish() methods in preparation to converting mvpp2 to split-PCS support. Signed-off-by:
-
Russell King authored
Tidy up the ACPI hack so that we can minimise the function prototypes for this. This avoids adding further prototypes unnecessarily. Signed-off-by:
-
David S. Miller authored
Tom Parkin says: ==================== l2tp: miscellaneous cleanups This series of patches makes the following cleanups and improvements to the l2tp code: * various API tweaks to remove unused parameters from function calls * lightly refactor the l2tp transmission path to capture more error conditions in the data plane statistics * repurpose the "magic feather" validation in l2tp to check for sk_user_data (ab)use as opposed to refcount debugging * remove some duplicated code ==================== Reviewed-by:
James Chapman <jchapman@katalix.com> Signed-off-by:
-
Tom Parkin authored
l2tp_tunnel_closeall is called as a part of tunnel shutdown in order to close all the sessions held by the tunnel. The code it uses to close a session duplicates what l2tp_session_delete does. Rather than duplicating the code, have l2tp_tunnel_closeall call l2tp_session_delete instead. This involves a very minor change to locking in l2tp_tunnel_closeall. Previously, l2tp_tunnel_closeall checked the session "dead" flag while holding tunnel->hlist_lock. This allowed for the code to step to the next session in the list without releasing the lock if the current session happened to be in the process of closing already. By calling l2tp_session_delete instead, l2tp_tunnel_closeall must now drop and regain the hlist lock for each session in the tunnel list. Given that the likelihood of a session being in the process of closing when the tunnel is closed, it seems worth this very minor potential loss of efficiency to avoid duplication of the session delete code. Signed-off-by:
Tom Parkin <tparkin@katalix.com> Signed-off-by:
-
Tom Parkin authored
The l2tp tunnel and session structures contain a "magic feather" field which was originally intended to help trace lifetime bugs in the code. Since the introduction of the shared kernel refcount code in refcount.h, and l2tp's porting to those APIs, we are covered by the refcount code's checks and warnings. Duplicating those checks in the l2tp code isn't useful. However, magic feather checks are still useful to help to detect bugs stemming from misuse/trampling of the sk_user_data pointer in struct sock. The l2tp code makes extensive use of sk_user_data to stash pointers to the tunnel and session structures, and if another subsystem overwrites sk_user_data it's important to detect this. As such, rework l2tp's magic feather checks to focus on validating the tunnel and session data structures when they're extracted from sk_user_data. * Add a new accessor function l2tp_sk_to_tunnel which contains a magic feather check, and is used by l2tp_core and l2tp_ip[6] * Comment l2tp_udp_encap_recv which doesn't use this new accessor function because of the specific nature of the codepath it is called in * Drop l2tp_session_queue_purge's check on the session magic feather: it is called from code which is walking the tunnel session list, and hence doesn't need validation * Drop l2tp_session_free's check on the tunnel magic feather: the intention of this check is covered by refcount.h's reference count sanity checking * Add session magic validation in pppol2tp_ioctl. On failure return -EBADF, which mirrors the approach in pppol2tp_[sg]etsockopt. Signed-off-by:
-
Tom Parkin authored
l2tp_xmit_skb has a number of failure paths which are not reflected in the tunnel and session statistics because the stats are updated by l2tp_xmit_core. Hence any errors occurring before l2tp_xmit_core is called are missed from the statistics. Refactor the transmit path slightly to capture all error paths. l2tp_xmit_skb now leaves all the actual work of transmission to l2tp_xmit_core, and updates the statistics based on l2tp_xmit_core's return code. Signed-off-by:
-
Tom Parkin authored
The argument is unused, so remove it. Signed-off-by:
-
Tom Parkin authored
The data_len argument passed to l2tp_xmit_core is no longer used, so remove it. Signed-off-by:
-
Tom Parkin authored
All callers pass the session structure's hdr_len field as the header length parameter to l2tp_xmit_skb. Since we're passing a pointer to the session structure to l2tp_xmit_skb anyway, there's not much point breaking the header length out as a separate argument. Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Expose critical and emergency module alarms Amit says: Extend hwmon interface with critical and emergency module alarms. In case that current module temperature is higher than emergency threshold, EMERGENCY alarm will be reported in sensors utility: $ sensors ... front panel 025: +55.0°C (crit = +35.0°C, emerg = +40.0°C) ALARM(EMERGENCY) In case that current module temperature is higher than critical threshold, CRIT alarm will be reported in sensors utility: $ sensors ... front panel 025: +54.0°C (crit = +35.0°C, emerg = +80.0°C) ALARM(CRIT) Patch set overview: Patches #1-#2 make several changes to make the code easier to change. Patch #3 extends the hwmon interface with the new module alarms. ==================== Signed-off-by: -
Amit Cohen authored
Add new attributes to hwmon object for exposing critical and emergency alarms. In case that current temperature is higher than emergency threshold, EMERGENCY alarm will be reported in sensors utility: $ sensors ... front panel 025: +55.0°C (crit = +35.0°C, emerg = +40.0°C) ALARM(EMERGENCY) In case that current temperature is higher than critical threshold, CRIT alarm will be reported in sensors utility: $ sensors ... front panel 025: +54.0°C (crit = +35.0°C, emerg = +80.0°C) ALARM(CRIT) Signed-off-by:
Amit Cohen <amitc@mellanox.com> Reviewed-by:
Petr Machata <petrm@mellanox.com> Acked-by:
Vadim Pasternak <vadimp@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Amit Cohen authored
Currently the value of MLXSW_HWMON_ATTR_COUNT is calculated not really accurate. Add several defines to make the calculation clearer and easier to change. Calculate the precise high bound of number of attributes that may be needed. Signed-off-by:
-
Amit Cohen authored
mlxsw_hwmon_module_temp_show(), mlxsw_hwmon_module_temp_critical_show() and mlxsw_hwmon_module_temp_emergency_show() query the relevant temperature from firmware and fill the value in provided buffers. Split the temperature querying functionality to individual get() functions and call them from the show() functions. The get() functions will be used by subsequent patches in the set. Signed-off-by:
-
David S. Miller authored
Paul Barker says: ==================== Minor improvements to b53 dmesg output These changes were made while debugging the b53 driver for use on a custom board. They've been runtime tested on a patched 4.14.y kernel which supports this board as well as build tested with 5.9-rc3. The changes are straightforward enough that I think this testing is sufficient but let me know if further testing is required. Unfortunately I don't have a board to hand which boots with a more recent kernel and has a switch supported by the b53 driver. I'd still like to upstream these patches if possible though. ==================== Signed-off-by: -
Paul Barker authored
This allows us to differentiate between the possible failure modes of b53_switch_reset() by looking at the dmesg output. Signed-off-by:
Paul Barker <pbarker@konsulko.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Paul Barker authored
This change allows us to see which device the err or info messages are referring to if we have multiple b53 compatible devices on a board. As this removes the only pr_*() calls in this file we can drop the definition of pr_fmt(). Signed-off-by:
-
- 02 Sep, 2020 11 commits
-
-
David S. Miller authored
Shannon Nelson says: ==================== ionic: struct cleanups This patchset has a few changes for better cacheline use, to cleanup a page handling API, and to streamline the Adminq/Notifyq queue handling. Lastly, we also have a couple of fixes pointed out by the friendly kernel test robot. v2: dropped change to irq coalesce default fixed Neel's attributions to Co-developed-by dropped the unnecessary new call to dma_sync_single_for_cpu() added 2 patches from kernel test robot results ==================== Signed-off-by: -
Shannon Nelson authored
Add parenthesis to clarify a boolean usage. Pointed out in https://lore.kernel.org/lkml/202008060413.VgrMuqLJ%25lkp@intel.com/Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Remove a vestigial variable. Pointed out in https://lore.kernel.org/lkml/20200806143735.GA9232@xsang-OptiPlex-9020/Reported-by:
-
Shannon Nelson authored
The only thing calling ionic_napi any more is the adminq processing, so combine and simplify. Co-developed-by:
Neel Patel <neel@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Remove some unnecessary struct fields and related code. Co-developed-by:
-
Shannon Nelson authored
Move a few active struct fields to the front of the struct for a little better cache use and performance. Signed-off-by:
-
Shannon Nelson authored
The internal page handling can be cleaned up by passing our local page struct rather than dma addresses, and by putting more of the mgmt code into the alloc and free routines. Co-developed-by:
-
David S. Miller authored
Linus Walleij says: ==================== RTL8366 stabilization This stabilizes the RTL8366 driver by checking validity of the passed VLANs and refactoring the member config (MC) code so we do not require strict call order and de-duplicate some code. Changes from v1: incorporate review comments on patch 2. Changes from v2: a oneline bug fix in patch 2. ==================== Signed-off-by: -
Linus Walleij authored
The VLANs and PVIDs on the RTL8366 utilizes a "member configuration" (MC) which is largely unexplained in the code. This set-up requires a special ordering: rtl8366_set_pvid() must be called first, followed by rtl8366_set_vlan(), else the MC will not be properly allocated. Relax this by factoring out the code obtaining an MC and reuse the helper in both rtl8366_set_pvid() and rtl8366_set_vlan() so we remove this strict ordering requirement. In the process, add some better comments and debug prints so people who read the code understand what is going on. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
The rtl8366_set_vlan() and rtl8366_set_pvid() get invalid VLANs tossed at it, especially VLAN0, something the hardware and driver cannot handle. Check validity and bail out like we do in the other callbacks. Reviewed-by:
-
Davide Caratti authored
in mptcp_connect, 's' selects IPPROTO_MPTCP / IPPROTO_TCP as the value of 'protocol' in socket(), and 'm' switches between different send / receive modes. Fix die_usage(): swap 'm' and 's' and add missing 'sendfile' mode. Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
- 01 Sep, 2020 10 commits
-
-
Sunil Goutham authored
Defines UDP segmentation algorithm in hardware and supports offloading UDP segmentation. Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
-
Andrew Lunn authored
When building on platforms without device tree, e.g. amd64, W=1 gives a warning about mv88e6xxx_mdio_external_match being unused. Replace of_match_node() with of_device_is_compatible() to prevent this warning. Suggested-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David S. Miller authored
Ioana Ciornei says: ==================== dpaa2-eth: add a dpaa2_eth_ prefix to all functions This is just a quick cleanup that aims at adding a dpaa2_eth_ prefix to all functions within the dpaa2-eth driver even if those are static and private to the driver. The main reason for doing this is that looking a perf top, for example, is becoming an inconvenience because one cannot easily determine which entries are dpaa2-eth related or not. ==================== Signed-off-by: -
Ioana Ciornei authored
Some static functions in the dpaa2-eth driver don't have the dpaa2_eth_ prefix and this is becoming an inconvenience when looking at, for example, a perf top output and trying to determine easily which entries are dpaa2-eth related. Ammend this by adding the prefix to all the functions. Signed-off-by:
Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by:
-
Ioana Ciornei authored
Some static functions in the dpaa2-eth driver don't have the dpaa2_eth_ prefix and this is becoming an inconvenience when looking at, for example, a perf top output and trying to determine easily which entries are dpaa2-eth related. Ammend this by adding the prefix to all the functions. Signed-off-by:
-
Ioana Ciornei authored
Some static functions in the dpaa2-eth driver don't have the dpaa2_eth_ prefix and this is becoming an inconvenience when looking at, for example, a perf top output and trying to determine easily which entries are dpaa2-eth related. Ammend this by adding the prefix to all the functions. Signed-off-by:
-
Eelco Chaudron authored
If nf_conncount_init fails currently the dispatched work is not canceled, causing problems when the timer fires. This change fixes this by not scheduling the work until all initialization is successful. Fixes: a65878d6 ("net: openvswitch: fixes potential deadlock in dp cleanup code") Reported-by:
Eelco Chaudron <echaudro@redhat.com> Reviewed-by:
Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by:
-
Thomas Falcon authored
In some cases, the device or firmware may be busy when the driver attempts to perform the CRQ initialization handshake. If the partner is busy, the hypervisor will return the H_CLOSED return code. The aim of this patch is that, if the device is not ready, to query the device a number of times, with a small wait time in between queries. If all initialization requests fail, the driver will remain in a dormant state, awaiting a signal from the device that it is ready for operation. Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-09-01 The following pull-request contains BPF updates for your *net-next* tree. There are two small conflicts when pulling, resolve as follows: 1) Merge conflict in tools/lib/bpf/libbpf.c between 88a82120 ("libbpf: Factor out common ELF operations and improve logging") in bpf-next and 1e891e51 ("libbpf: Fix map index used in error message") in net-next. Resolve by taking the hunk in bpf-next: [...] scn = elf_sec_by_idx(obj, obj->efile.btf_maps_shndx); data = elf_sec_data(obj, scn); if (!scn || !data) { pr_warn("elf: failed to get %s map definitions for %s\n", MAPS_ELF_SEC, obj->path); return -EINVAL; } [...] 2) Merge conflict in drivers/net/ethernet/mellanox/mlx5/core/en/xsk/rx.c between 9647c57b ("xsk: i40e: ice: ixgbe: mlx5: Test for dma_need_sync earlier for better performance") in bpf-next and e20f0dbf ("net/mlx5e: RX, Add a prefetch command for small L1_CACHE_BYTES") in net-next. Resolve the two locations by retaining net_prefetch() and taking xsk_buff_dma_sync_for_cpu() from bpf-next. Should look like: [...] xdp_set_data_meta_invalid(xdp); xsk_buff_dma_sync_for_cpu(xdp, rq->xsk_pool); net_prefetch(xdp->data); [...] We've added 133 non-merge commits during the last 14 day(s) which contain a total of 246 files changed, 13832 insertions(+), 3105 deletions(-). The main changes are: 1) Initial support for sleepable BPF programs along with bpf_copy_from_user() helper for tracing to reliably access user memory, from Alexei Starovoitov. 2) Add BPF infra for writing and parsing TCP header options, from Martin KaFai Lau. 3) bpf_d_path() helper for returning full path for given 'struct path', from Jiri Olsa. 4) AF_XDP support for shared umems between devices and queues, from Magnus Karlsson. 5) Initial prep work for full BPF-to-BPF call support in libbpf, from Andrii Nakryiko. 6) Generalize bpf_sk_storage map & add local storage for inodes, from KP Singh. 7) Implement sockmap/hash updates from BPF context, from Lorenz Bauer. 8) BPF xor verification for scalar types & add BPF link iterator, from Yonghong Song. 9) Use target's prog type for BPF_PROG_TYPE_EXT prog verification, from Udip Pant. 10) Rework BPF tracing samples to use libbpf loader, from Daniel T. Lee. 11) Fix xdpsock sample to really cycle through all buffers, from Weqaar Janjua. 12) Improve type safety for tun/veth XDP frame handling, from Maciej Żenczykowski. 13) Various smaller cleanups and improvements all over the place. ==================== Signed-off-by:
-
YueHaibing authored
Remove unneeded return value cast. This is detected by coccinelle. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
