- 23 Dec, 2015 12 commits
-
-
Philipp Zabel authored
Hook up the MPEG-2 ES decoder. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Philipp Zabel authored
We could support start streaming with an empty output queue for the BIT decoders due to the bitstream buffer which could still contain data at this point, but there is really no reason for userspace to expect this to work. Simplify the code by disallowing it. Signed-off-by:
-
Philipp Zabel authored
Signed-off-by:
-
Philipp Zabel authored
coda_jpeg_check_buffer only cares about the buffer length and contents, so change the parameter type back from v4l2_vb2_buffer to just the vb2_buffer. Instead of just checking the first and last bytes for the SOI and EOI markers, relax the EOI marker check a bit and allow up to 32 trailing bytes after the EOI marker as hardware generated JPEGs sometimes contain some alignment overhead. Signed-off-by:
-
Philipp Zabel authored
This function is not used outside coda-common.c. Signed-off-by:
-
Andrzej Hajda authored
MFC register addresses are used only by writel/readl macros which already takes care of proper register accessing. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Andrzej Hajda authored
Both macros can be merged into one. Signed-off-by:
-
Andrzej Hajda authored
MFC driver uses dev->irqlock spinlock to protect queues only, but many context fields require protection also - they can be accessed concurrently from IOCTLs and IRQ handler. The patch increases protection range of irqlock to those fields also. Signed-off-by:
-
Andrzej Hajda authored
Many version specific functions are not called by common code, so there is no need to use callbacks. Additionally some of them are not used at all, so they can be safely removed. Signed-off-by:
-
Andrzej Hajda authored
Code for queue cleanup has nothing specific to hardware version. Signed-off-by:
-
Andrzej Hajda authored
Both version of MFC driver use functions with the same body and name. The patch moves them to common location. It also simplifies it. Signed-off-by:
-
Julia Lawall authored
The s5p_mfc_codec_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
- 21 Dec, 2015 2 commits
-
-
Mauro Carvalho Chehab authored
As reported by kmemleak: unreferenced object 0xffff880321e1da40 (size 32): comm "modprobe", pid 3309, jiffies 4295019569 (age 2359.636s) hex dump (first 32 bytes): 47 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 G............... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff82278c8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8153c08c>] kmem_cache_alloc_trace+0x1ec/0x280 [<ffffffffa13a896a>] au8522_probe+0x19a/0xa30 [au8522_decoder] [<ffffffff81de0032>] i2c_device_probe+0x2b2/0x490 [<ffffffff81ca7004>] driver_probe_device+0x454/0xd90 [<ffffffff81ca7c1b>] __device_attach_driver+0x17b/0x230 [<ffffffff81ca15da>] bus_for_each_drv+0x11a/0x1b0 [<ffffffff81ca6a4d>] __device_attach+0x1cd/0x2c0 [<ffffffff81ca7d43>] device_initial_probe+0x13/0x20 [<ffffffff81ca451f>] bus_probe_device+0x1af/0x250 [<ffffffff81c9e0f3>] device_add+0x943/0x13b0 [<ffffffff81c9eb7a>] device_register+0x1a/0x20 [<ffffffff81de8626>] i2c_new_device+0x5d6/0x8f0 [<ffffffffa0d88ea4>] v4l2_i2c_new_subdev_board+0x1e4/0x250 [v4l2_common] [<ffffffffa0d88fe7>] v4l2_i2c_new_subdev+0xd7/0x110 [v4l2_common] [<ffffffffa13b2f76>] au0828_card_analog_fe_setup+0x2e6/0x3f0 [au0828] Checking where the error happens: (gdb) list *au8522_probe+0x19a 0x99a is in au8522_probe (drivers/media/dvb-frontends/au8522_decoder.c:761). 756 printk(KERN_INFO "au8522_decoder attach existing instance.\n"); 757 break; 758 } 759 760 demod_config = kzalloc(sizeof(struct au8522_config), GFP_KERNEL); 761 if (demod_config == NULL) { 762 if (instance == 1) 763 kfree(state); 764 return -ENOMEM; 765 } Shows that the error path is not being handled properly. The are actually several issues here: 1) config free should have been calling hybrid_tuner_release_state() function, by calling au8522_release_state(); 2) config is only allocated at the digital part. On the analog one, it is received from the caller. A complex logic could be added to address it, however, it is simpler to just embeed config inside the state. Signed-off-by: -
Mauro Carvalho Chehab authored
As reported by kmemleak: unreferenced object 0xffff8802adae0ba0 (size 192): comm "modprobe", pid 3024, jiffies 4296503588 (age 324.368s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff c0 48 25 a0 ff ff ff ff .........H%..... backtrace: [<ffffffff82278c8e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff8153c08c>] kmem_cache_alloc_trace+0x1ec/0x280 [<ffffffffa0250f0d>] ir_lirc_register+0x8d/0x7a0 [ir_lirc_codec] [<ffffffffa07372b8>] ir_raw_event_register+0x318/0x4b0 [rc_core] [<ffffffffa07351ed>] rc_register_device+0xf2d/0x1450 [rc_core] [<ffffffffa13c5451>] au0828_rc_register+0x7d1/0xa10 [au0828] [<ffffffffa13b0dc2>] au0828_usb_probe+0x6c2/0xcf0 [au0828] [<ffffffff81d7619d>] usb_probe_interface+0x45d/0x940 [<ffffffff81ca7004>] driver_probe_device+0x454/0xd90 [<ffffffff81ca7a61>] __driver_attach+0x121/0x160 [<ffffffff81ca141f>] bus_for_each_dev+0x11f/0x1a0 [<ffffffff81ca5d4d>] driver_attach+0x3d/0x50 [<ffffffff81ca5039>] bus_add_driver+0x4c9/0x770 [<ffffffff81ca944c>] driver_register+0x18c/0x3b0 [<ffffffff81d71e58>] usb_register_driver+0x1f8/0x440 [<ffffffffa13680b7>] 0xffffffffa13680b7 0xf3d is in ir_lirc_register (drivers/media/rc/ir-lirc-codec.c:348). 343 drv = kzalloc(sizeof(struct lirc_driver), GFP_KERNEL); 344 if (!drv) 345 return rc; 346 347 rbuf = kzalloc(sizeof(struct lirc_buffer), GFP_KERNEL); 348 if (!rbuf) 349 goto rbuf_alloc_failed; 350 351 rc = lirc_buffer_init(rbuf, sizeof(int), LIRCBUF_SIZE); 352 if (rc) Signed-off-by:
-
- 18 Dec, 2015 26 commits
-
-
Dan Carpenter authored
Smatch is not smart enough to see that "&stream->clock.lock" and "&clock->lock" are the same thing so it complains about the locking here. Let's make it more consistent. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Anton V. Shokurov authored
V4L2_CID_EXPOSURE_ABSOLUTE property does not return an updated value when autoexposure (V4L2_CID_EXPOSURE_AUTO) is turned on. This patch fixes this issue by adding the UVC_CTRL_FLAG_AUTO_UPDATE flag. Tested on a C920 camera. Signed-off-by:
Anton V. Shokurov <shokurov.anton.v@yandex.ru> Signed-off-by:
-
Mauro Carvalho Chehab authored
Smatch complains about where the au8293_data is placed: drivers/media/pci/cx23885/cx23885-dvb.c:2174 dvb_register() info: 'a8293_pdata' is not actually initialized (unreached code). It is not actually expected to have such initialization at switch { foo = bar; case: ... } Not really sure how gcc does that, but this is something that I would expect that different compilers would do different things. David Howells checked with the compiler people: it's not really expected to initialise as expected. So, move the initialization outside the switch(), making smatch to shut up one warning. Acked-by:David Howells <dhowells@redhat.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/pci/cx23885/cx23885-dvb.c:2174 dvb_register() info: 'a8293_pdata' is not actually initialized (unreached code). Signed-off-by: -
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/v4l2-core/videobuf2-core.c:2415 __vb2_init_fileio() warn: possible memory leak of 'fileio' While here, avoid the usage of sizeof(struct foo_struct). Signed-off-by: -
Hans Verkuil authored
The handling of q->plane_sizes was wrong in vb2_core_create_bufs(). The q->plane_sizes array was global and it was overwritten by create_bufs. So if reqbufs was called with e.g. size 100000 then q->plane_sizes[0] would be set to 100000. If create_bufs was called afterwards with size 200000, then q->plane_sizes[0] would be overwritten with the new value. Calling create_bufs again for size 100000 would cause an error since 100000 is now less than q->plane_sizes[0]. This patch fixes this problem by 1) removing q->plane_sizes and using the vb->planes[].length field instead, and 2) by introducing a min_length field in struct vb2_plane. This field is set to the plane size as returned by the queue_setup op and is the minimum required plane size. So user pointers or dmabufs should all be at least this size. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Reported-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Hans Verkuil authored
Ensure that the offsets are correct before buf_init() is called. As a consequence the __setup_offsets() function now sets up the offsets for the given buffer instead of for all new buffers. Signed-off-by:
-
Hans Verkuil authored
Fill in q->bufs[vb->index] before the call to buf_init: it makes sense that this is initialized correctly. Signed-off-by:
-
Hans Verkuil authored
Rather than setting up the lengths at the end, set them up when the vb2_buffer is allocated. This also ensures that buf_init() sees the right length values. Signed-off-by:
-
Hans Verkuil authored
This ops can never fail, so make these void functions. Signed-off-by:
-
Hans Verkuil authored
This module is no longer V4L2 specific, so update the module description accordingly. Signed-off-by:
-
Junghak Sung authored
Move things related with vb2 file I/O and vb2_thread without doing any functional changes. After that, videobuf2-internal.h is removed because it is not necessary any more. Signed-off-by:
Junghak Sung <jh1009.sung@samsung.com> Signed-off-by:
Geunyoung Kim <nenggun.kim@samsung.com> Acked-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by:
Inki Dae <inki.dae@samsung.com> Acked-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Junghak Sung authored
Replace v4l2-stuffs with common things in struct vb2_fileio_data and vb2_thread(). Signed-off-by:
-
Junghak Sung authored
The location in which last_buffer_queued is set is moved to fill_v4l2_buffer(). So, __vb2_perform_fileio() can use vb2_core_dqbuf() instead of vb2_internal_dqbuf(). Signed-off-by:
-
Junghak Sung authored
Separate vb2_poll() into core and v4l2 part. Signed-off-by:
-
Junghak Sung authored
Add copy_timestamp to struct vb2_queue as a flag set if vb2-core should copy timestamps. Signed-off-by:
-
Junghak Sung authored
Move timestamp from struct vb2_v4l2_buffer to struct vb2_buffer for common use, and change its type to u64 in order to handling y2038 problem. This patch also includes all device drivers' changes related to this restructuring. Signed-off-by:
-
Hans Verkuil authored
The timestamp of a v4l2_buffer was advertised as being CLOCK_MONOTONIC, but instead a timestamp from a header field was used. This is inconsistent and not what applications expect. Use v4l2_get_timestamp to properly set the timestamp. Signed-off-by:
-
Hans Verkuil authored
During the Seoul media workshop we decided to relax the VIDIOC_CREATE_BUFS specification so it would no longer require drivers to validate the format field since almost no driver did that anyway. Instead drivers use the buffer size(s) based on the format type and the corresponding format fields and will ignore any other fields. If the size cannot be used an error is returned, otherwise the size is used as-is. Signed-off-by:
-
Hans Verkuil authored
The queue_setup callback has a void pointer that is just for V4L2 and is the pointer to the v4l2_format struct that was passed to VIDIOC_CREATE_BUFS. The idea was that drivers would use the information from that struct to buffers suitable for the requested format. After the vb2 split series this pointer is now a void pointer, which is ugly, and the reality is that all existing drivers will effectively just look at the sizeimage field of v4l2_format. To make this more generic the queue_setup callback is changed: the void pointer is dropped, instead if the *num_planes argument is 0, then use the current format size, if it is non-zero, then it contains the number of requested planes and the sizes array contains the requested sizes. If either is unsupported, then return -EINVAL, otherwise use the requested size(s). Signed-off-by:
-
Hans Verkuil authored
The VID_A_GPCNT register is for video, not vbi. Read from the right register and don't write to the video register. Based upon Devin's initial patch made for an older kernel which I cleaned up and rebased. Thanks to Kernel Labs for that work. Signed-off-by:
Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by:
-
Hans Verkuil authored
Add support for these two new cards. Based upon Devin's initial patch made for an older kernel which I cleaned up and rebased. Thanks to Kernel Labs for that work. Signed-off-by:
-
Hans Verkuil authored
Add simple support for this 8 channel volume control driver. Currently all it does is to unmute all 8 channels. Based upon Devin's initial patch made for an older kernel which I cleaned up and rebased. Thanks to Kernel Labs for that work. Signed-off-by:
-
Hans Verkuil authored
This is necessary since the *_std_setup functions rely on a valid state->std field. Also fix the cx23888_std_setup() to test for 60Hz instead of NTSC, just like cx25840_std_setup() does. Signed-off-by:
-
Hans Verkuil authored
For those two devices the code wrote to addresses 0x115/6, but on those devices those addresses have nothing to do with power controls. So clearly this never worked. Rather than writing to bogus addresses, just do nothing for the cx2388x and cx231xx. Signed-off-by:
-
Hans Verkuil authored
The cx23888 reports a slightly different Vsrc value than the other chip variants do. Relax the check by 1, otherwise cx25840_set_fmt() would fail for the cx23888. Signed-off-by:
-
