Its really part of initializing the host device and is required for
every 'hd' that is created. Lets move the call to do basic
initialization of svc connection to greybus_create_hd().

Also add a comment to specify why we need to do it that early.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We forgot to free any ida internal structures that were used by this
host controller structure when we free the memory for the controller.
So fix that up by doing so in the release function.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The svc connection needs to be ready before creating the URBs, otherwise
the svc version request might come in before the AP was ready to parse
them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The function is only called locally, so mark it static to make sparse
happy.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The callback is never used anymore, so remove it from struct
greybus_host_driver as well as from the es1 and es2 drivers.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The function is gone, remove it from the header file as well.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The AP needs to be able to specify L4 CPort flags and traffic class
parameters on a connection-by-connection basis. Extend the connection
create operation to accept these. Since there's no policy to decide
these, fix them at TC0 with end-to-end-flow control, controlled segment
dropping, and CPort safety valve enabled.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Ask the SVC to do all the necessary bits for creating a new connection.
This is skipped for the initial SVC connection.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Upon receiving a hotplug request, we need to prepare the routing table
to allow packets to flow between the AP interface and the newly detected
interface.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Implement the SVC Protocol Route Create Operation.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Its not used anymore as we have more sophisticated svc protocol in
place, lets get rid of earlier code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We have switched over to use the "new" svc messages, no more need to
have a special USB endpoint to handle them, they come through the normal
CPort messages.

Based on a patch from Viresh.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We have switched over to use the "new" svc messages, no more need to
have a special USB endpoint to handle them, they come through the normal
CPort messages.

Based on a patch from Viresh.
Tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Initially we fixed it to Cport 2, but its changed to Cport 0 now. Lets
switch that in code as well.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

All bits and pieces are in place now. Lets start using svc protocol
instead of stuff present in ap.c.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

SVC protocol isn't per interface, but per entire entire endo. And so svc
cport id must be matched against hd_cport_id, not per-interface cport
id.

Fixes: 82edfac17e5f ("connection: don't send connected/disconnected events for SVC connection")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

If a protocol was not successfully created, we can't drop the refcount
on it. This might happen for example if the connection fails to bind a
protocol.

Silences a warning on cleanup.
Signed-off-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

If an operation times out or otherwise returns an error, val->intval
should not be set and an error-code should be returned.

Fixes a panic on unload while receiving -ENOTCONN.
Signed-off-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Its not referenced by svc or any other code anymore, lets stop exposing
it to rest of the files.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Its not updated/used anymore, remove it. Also move back the struct
gb_svc to svc.c as its not referenced by external users anymore.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

We no longer create a fresh connection on receiving svc-hello message,
but rather update the initial one.

Update 'initial_svc_connection' after the connection is fully
initialized. Look for the partially initialized connection while
removing hd, as hd might be removed before getting svc-hello requests
from svc.

Also update gb_svc_connection_init() to initialize id_map on the first
(and the only) call to connection-init function.

We also can't update connection->bundle->intf->svc, as its a bundle-less
connection. Lets stop updating intf->svc as its not really used.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

SVC hello message is received now and we should fully initialize the
partially initialized connection. This can be done by removing and
re-adding the device corresponding to the connection.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Perry Hung <perry@leaflabs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Current code will incrementally poll for gb->type == 0 and sleep.
This type of polling strategy wastes cycles.

This patch changes the sleep strategy by introducing a wait-queue which
waits for gb->type != 0 or kthread_should_stop() to wake-up and work or
to wake-up and terminate.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This adds the ability to poll on "iteration_count" in sysfs and be woken
up when it changes, saving some cycles constantly hammering on the file
waiting for it to change.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

Add dedicated bound work queue for operation completions and use the
connection work queues for incoming requests only.

There is no need to keep responses ordered internally or with respect to
requests. Instead allow operations to complete as soon as possible when
a response arrives (or the operation is cancelled).

Note that this also allows synchronous requests to be submitted from
request handlers as responses will no longer be blocked on the same
single-threaded work queue. Similarly, operations can now also be
cancelled from a request handler.
Tested-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Replace the global operation work queue with per-connection work queues.

There is no need to keep operations strictly ordered across connections,
something which only adds unnecessary latency.
Tested-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Clean up connection-creation error paths.
Tested-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add variable for the host cport id rather than overload retval.
Remove redundant automatic variable for the id map.
Tested-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

If we don't have a protocol assigned to a connection, don't oops when
trying to read the "protocol_id" sysfs file.

Fixes Jira SW-968.
Reported-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>

Fix below warnings that only generate for a 64 bit system:

greybus/svc.c:202:16: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t {aka long unsigned int}’ [-Wformat=]
   dev_err(dev, "%s: Illegal size of hello request (%d %d)\n",
                ^
greybus/svc.c:202:16: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘long unsigned int’ [-Wformat=]

Fixes: 9cbe73e0cf45 ("svc: Implement SVC requests")
Reported-by: Greg KH <gregkh@google.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Make sure connection is fully initialised before registering the
connection device and adding it to the host-device and bundle lists.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Tested-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add connection variable to greybus_message_sent.

This will be put to more use by a follow-up up patch.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Tested-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Make the operation work queue single threaded.

The operation work queue was meant to be single threaded, but due to a
missing flag instead allowed one active task per CPU, something which
could lead to requests being processed out of order on SMP systems.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Tested-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The name frequency does not adequately describe the data-point tracking the
number of greybus operations performed in a second by the loopback code.
Firmware team is moving towards calling this variable requests-per-second
or similar. This patch renames to keep the namespace consistent.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add some missing comments.
Add a TODO to look at doing iteration_count with KOBJ_CHANGE event instead
of having user-space poll the value reported in iteration_count to
determine when a test set is complete.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In order to extract a meaningful set of data out of loopback metrics it
makes sense to have the ability to specify how many times a loopback
operation should run and then to stop when the threshold is hit.

This will allow exactly the same loopback data pattern to be run again and
again, which is a fundamental prerequisite to instrumenting and
characterizing the loopback interface over time.

This patch introduces a simple sysfs controlled variable iteration_max.
iteration_max is the maximum number of iterations to run for a given set.
iteration_count is used internally to count from zero to iteration_max
if-and-only-if iteration_max is non zero. If iteration_max is zero then the
original behaviour of running the test command ad infinitum is maintained.
User-space should incrementally poll the iteration_count to determine when
the sequence is finished.

To accomplish this we move away from running as many commands as possible
in a one second window and instead run a fixed number of commands and log
the time it takes for those commands to complete in aggregate. Since we are
no longer resetting counters every one second, the tracker variables have
been moved from u32 to u64 to allow for reasonably long tests to gather
reasonably large amounts of data, without fear of over-flowing the
data-points.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Old comment needs updating to match 8a282c411ba0 ('greybus/loopback: make
loopback type input equivalent to protocol type')
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Patrick Titiano <ptitiano@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

In the current code if the ts variable is not initialized then any data
already gathered in a previous loopback command is dropped instead of
logged. Also the timestamping of ts is done after the greybus operation.

This delayed time-stamping means that the delta between the before and
after timestamps is incorrect and if a delay in-between loopback operations
has been specified by the user, the ts timestamp will be very skewed
indeed.

- Move the ts initialization directly before the greybus operation.
- Remove the continue statement on first initialization of the ts variable.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This patch converts a dangling pr_err in the manifest parsing error path to
a dev_err in order to remain consistent with similar error messages
elsewhere.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>