1. 03 Oct, 2013 13 commits
  2. 02 Oct, 2013 9 commits
    • Joe Perches's avatar
      net:drivers/net: Miscellaneous conversions to ETH_ALEN · d458cdf7
      Joe Perches authored
      Convert the memset/memcpy uses of 6 to ETH_ALEN
      where appropriate.
      
      Also convert some struct definitions and u8 array
      declarations of [6] to ETH_ALEN.
      Signed-off-by: default avatarJoe Perches <joe@perches.com>
      Acked-by: default avatarArend van Spriel <arend@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      d458cdf7
    • Denis Kirjanov's avatar
      include/linux/skbuff.h: move CONFIG_XFRM check inside the skb_sec_path() · 0b3d8e08
      Denis Kirjanov authored
      And thus we have only one function definition
      Signed-off-by: default avatarDenis Kirjanov <kda@linux-powerpc.org>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0b3d8e08
    • Eric Dumazet's avatar
      tcp: sndbuf autotuning improvements · 6ae70532
      Eric Dumazet authored
      tcp_fixup_sndbuf() is underestimating initial send buffer requirements.
      
      It was not noticed because big GSO packets were escaping the limitation,
      but with smaller TSO packets (or TSO/GSO/SG off), application hits
      sk_sndbuf before having a chance to fill enough packets in socket write
      queue.
      
      - initial cwnd can be bigger than 10 for specific routes
      
      - SKB_TRUESIZE() is a bit under real needs in some cases,
        because of power-of-two rounding in kmalloc()
      
      - Fast Recovery (RFC 5681 3.2) : Cubic needs 70% factor
      
      - Extra cushion (application might react slowly to POLLOUT)
      
      tcp_v4_conn_req_fastopen() needs to call tcp_init_metrics() before
      calling tcp_init_buffer_space()
      
      Then we realize tcp_new_space() should call tcp_fixup_sndbuf()
      instead of duplicating this stuff.
      
      Rename tcp_fixup_sndbuf() to tcp_sndbuf_expand() to be more
      descriptive.
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarNeal Cardwell <ncardwell@google.com>
      Signed-off-by: default avatarYuchung Cheng <ycheng@google.com>
      Acked-by: default avatarMaciej Żenczykowski <maze@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6ae70532
    • baker.zhang's avatar
      fib_trie: avoid a redundant bit judgement in inflate · bbe34cf8
      baker.zhang authored
      Because 'node' is the i'st child of 'oldnode',
      thus, here 'i' equals
      tkey_extract_bits(node->key, oldtnode->pos, oldtnode->bits)
      
      we just get 1 more bit,
      and need not care the detail value of this bits.
      
      I apologize for the mistake.
      
      I generated the patch on a branch version,
      and did not notice the put_child has been changed.
      
      I have redone the test on HEAD version with my patch.
      
      two cases are used.
      case 1. inflate a node which has a leaf child node.
      case 2: inflate a node which has a an child node with skipped bits
      
      test env:
        ip link set eth0 up
        ip a add dev eth0 192.168.11.1/32
      here, we just focus on route table(MAIN),
      so I use a "192.168.11.1/32" address to simplify the test case.
      
      call trace:
      + fib_insert_node
      + + trie_rebalance
      + + + resize
      + + + + inflate
      
      Test case 1:  inflate a node which has a leaf child node.
      
      ===========================================================
      step 1. prepare a fib trie
      ------------------------------------------
        ip r a 192.168.0.0/24 via 192.168.11.1
        ip r a 192.168.1.0/24 via 192.168.11.1
      
      we get a fib trie.
      root@baker:~# cat /proc/net/fib_trie
      Main:
        +-- 192.168.0.0/23 1 0 0
         |-- 192.168.0.0
          /24 universe UNICAST
         |-- 192.168.1.0
          /24 universe UNICAST
      Local:
      .....
      
      step 2. Add the third route
      ------------------------------------------
      root@baker:~# ip r a 192.168.2.0/24 via 192.168.11.1
      
      A fib_trie leaf will be inserted in fib_insert_node before trie_rebalance.
      
      For function 'inflate':
      'inflate' is called with following trie.
        +-- 192.168.0.0/22 1 1 0 <=== tn node
          +-- 192.168.0.0/23 1 0 0    <== node a
              |-- 192.168.0.0
                /24 universe UNICAST
              |-- 192.168.1.0
                /24 universe UNICAST
            |-- 192.168.2.0          <== leaf(node b)
      
      When process node b, which is a leaf. here:
      i is 1,
      node key "192.168.2.0"
      oldnode is (pos:22, bits:1)
      
      unpatch source:
      tkey_extract_bits(node->key, oldtnode->pos + oldtnode->bits, 1)
      it equals:
      tkey_extract_bits("192.168,2,0", 22 + 1, 1)
      
      thus got 0, and call put_child(tn, 2*i, node); <== 2*i=2.
      
      patched source:
      tkey_extract_bits(node->key, oldtnode->pos, oldtnode->bits + 1),
      tkey_extract_bits("192.168,2,0", 22, 1 + 1)  <== get 2.
      
      Test case 2:  inflate a node which has a an child node with skipped bits
      ==========================================================================
      step 1. prepare a fib trie.
        ip link set eth0 up
        ip a add dev eth0 192.168.11.1/32
        ip r a 192.168.128.0/24 via 192.168.11.1
        ip r a 192.168.0.0/24  via 192.168.11.1
        ip r a 192.168.16.0/24   via 192.168.11.1
        ip r a 192.168.32.0/24  via 192.168.11.1
        ip r a 192.168.48.0/24  via 192.168.11.1
        ip r a 192.168.144.0/24   via 192.168.11.1
        ip r a 192.168.160.0/24   via 192.168.11.1
        ip r a 192.168.176.0/24   via 192.168.11.1
      
      check:
      root@baker:~# cat /proc/net/fib_trie
      Main:
        +-- 192.168.0.0/16 1 0 0
           +-- 192.168.0.0/18 2 0 0
              |-- 192.168.0.0
                 /24 universe UNICAST
              |-- 192.168.16.0
                 /24 universe UNICAST
              |-- 192.168.32.0
                 /24 universe UNICAST
              |-- 192.168.48.0
                 /24 universe UNICAST
           +-- 192.168.128.0/18 2 0 0
              |-- 192.168.128.0
                 /24 universe UNICAST
              |-- 192.168.144.0
                 /24 universe UNICAST
              |-- 192.168.160.0
                 /24 universe UNICAST
              |-- 192.168.176.0
                 /24 universe UNICAST
      Local:
        ...
      
      step 2. add a route to trigger inflate.
        ip r a 192.168.96.0/24   via 192.168.11.1
      
      This command will call serveral times inflate.
      In the first time, the fib_trie is:
      ________________________
      +-- 192.168.128.0/(16, 1) <== tn node
       +-- 192.168.0.0/(17, 1)  <== node a
        +-- 192.168.0.0/(18, 2)
         |-- 192.168.0.0
         |-- 192.168.16.0
         |-- 192.168.32.0
         |-- 192.168.48.0
        |-- 192.168.96.0
       +-- 192.168.128.0/(18, 2) <== node b.
        |-- 192.168.128.0
        |-- 192.168.144.0
        |-- 192.168.160.0
        |-- 192.168.176.0
      
      NOTE: node b is a interal node with skipped bits.
      here,
      i:1,
      node->key "192.168.128.0",
      oldnode:(pos:16, bits:1)
      so
      tkey_extract_bits(node->key, oldtnode->pos + oldtnode->bits, 1)
      it equals:
      tkey_extract_bits("192.168,128,0", 16 + 1, 1) <=== 0
      
      tkey_extract_bits(node->key, oldtnode->pos, oldtnode->bits, 1)
      it equals:
      tkey_extract_bits("192.168,128,0", 16, 1+1) <=== 2
      
      2*i + 0 == 2, so the result is same.
      Signed-off-by: default avatarbaker.zhang <baker.kernel@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bbe34cf8
    • Jesper Juhl's avatar
      isdn: eicon: free pointer after using it in log msg in divas_um_idi_delete_entity() · 84557783
      Jesper Juhl authored
      Not really a problem, but nice IMHO; the Coverity static analyzer
      complains that we use the pointer 'e' after it has been freed, so move
      the freeing below the final use, even if that use is just using the
      value of the pointer and not actually dereferencing it.
      Signed-off-by: default avatarJesper Juhl <jj@chaosbits.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      84557783
    • Wei Liu's avatar
      xen-netfront: convert to GRO API · 99d3d587
      Wei Liu authored
      Anirban was seeing netfront received MTU size packets, which downgraded
      throughput. The following patch makes netfront use GRO API which
      improves throughput for that case.
      Signed-off-by: default avatarWei Liu <wei.liu2@citrix.com>
      Cc: Anirban Chakraborty <abchak@juniper.net>
      Cc: Ian Campbell <ian.campbell@citrix.com>
      Acked-by: default avatarKonrad Wilk <konrad.wilk@oracle.com>
      Acked-by: default avatarIan Campbell <ian.campbell@citrix.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      99d3d587
    • Hauke Mehrtens's avatar
      tg3: use phylib when robo switch is in use · ee002b64
      Hauke Mehrtens authored
      When a switch is connected as a PHY to the MAC driven by tg3, use
      phylib and provide the phy address to tg3 from the sprom.
      Signed-off-by: default avatarHauke Mehrtens <hauke@hauke-m.de>
      Acked-by: default avatarNithin Nayak Sujir <nsujir@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ee002b64
    • Hauke Mehrtens's avatar
      ssb: provide phy address for Gigabit Ethernet driver · 4bcef89f
      Hauke Mehrtens authored
      Add a function to provide the phy address which should be used to the
      Gigabit Ethernet driver connected to ssb.
      Signed-off-by: default avatarHauke Mehrtens <hauke@hauke-m.de>
      Reviewed-by: default avatarNithin Nayak Sujir <nsujir@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4bcef89f
    • Hauke Mehrtens's avatar
      tg3: add support a phy at an address different than 01 · ead2402c
      Hauke Mehrtens authored
      When phylib was in use tg3 only searched at address 01 on the mdio
      bus and did not work with any other address. On the BCM4705 SoCs the
      switch is connected as a PHY behind the MAC driven by tg3 and it is at
      PHY address 30 in most cases. This is a preparation patch to allow
      support for such switches.
      
      phy_addr is set to TG3_PHY_MII_ADDR for all devices, which are using
      phylib, so this should not change any behavior.
      Signed-off-by: default avatarHauke Mehrtens <hauke@hauke-m.de>
      Acked-by: default avatarNithin Nayak Sujir <nsujir@broadcom.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      ead2402c
  3. 01 Oct, 2013 18 commits
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 4fbef95a
      David S. Miller authored
      Conflicts:
      	drivers/net/ethernet/emulex/benet/be.h
      	drivers/net/usb/qmi_wwan.c
      	drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h
      	include/net/netfilter/nf_conntrack_synproxy.h
      	include/net/secure_seq.h
      
      The conflicts are of two varieties:
      
      1) Conflicts with Joe Perches's 'extern' removal from header file
         function declarations.  Usually it's an argument signature change
         or a function being added/removed.  The resolutions are trivial.
      
      2) Some overlapping changes in qmi_wwan.c and be.h, one commit adds
         a new value, another changes an existing value.  That sort of
         thing.
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4fbef95a
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · c31eeace
      Linus Torvalds authored
      Pull networking changes from David Miller:
      
       1) Multiply in netfilter IPVS can overflow when calculating destination
          weight.  From Simon Kirby.
      
       2) Use after free fixes in IPVS from Julian Anastasov.
      
       3) SFC driver bug fixes from Daniel Pieczko.
      
       4) Memory leak in pcan_usb_core failure paths, from Alexey Khoroshilov.
      
       5) Locking and encapsulation fixes to serial line CAN driver, from
          Andrew Naujoks.
      
       6) Duplex and VF handling fixes to bnx2x driver from Yaniv Rosner,
          Eilon Greenstein, and Ariel Elior.
      
       7) In lapb, if no other packets are outstanding, T1 timeouts actually
          stall things and no packet gets sent.  Fix from Josselin Costanzi.
      
       8) ICMP redirects should not make it to the socket error queues, from
          Duan Jiong.
      
       9) Fix bugs in skge DMA mapping error handling, from Nikulas Patocka.
      
      10) Fix setting of VLAN priority field on via-rhine driver, from Roget
          Luethi.
      
      11) Fix TX stalls and VLAN promisc programming in be2net driver from
          Ajit Khaparde.
      
      12) Packet padding doesn't get handled correctly in new usbnet SG
          support code, from Ming Lei.
      
      13) Fix races in netdevice teardown wrt.  network namespace closing.
          From Eric W.  Biederman.
      
      14) Fix potential missed initialization of net_secret if not TCP
          connections are openned.  From Eric Dumazet.
      
      15) Cinterion PLXX product ID in qmi_wwan driver is wrong, from
          Aleksander Morgado.
      
      16) skb_cow_head() can change skb->data and thus packet header pointers,
          don't use stale ip_hdr reference in ip_tunnel code.
      
      17) Backend state transition handling fixes in xen-netback, from Paul
          Durrant.
      
      18) Packet offset for AH protocol is handled wrong in flow dissector,
          from Eric Dumazet.
      
      19) Taking down an fq packet scheduler instance can leave stale packets
          in the queues, fix from Eric Dumazet.
      
      20) Fix performance regressions introduced by TCP Small Queues.  From
          Eric Dumazet.
      
      21) IPV6 GRE tunneling code calculates max_headroom incorrectly, from
          Hannes Frederic Sowa.
      
      22) Multicast timer handlers in ipv4 and ipv6 can be the last and final
          reference to the ipv4/ipv6 specific network device state, so use the
          reference put that will check and release the object if the
          reference hits zero.  From Salam Noureddine.
      
      23) Fix memory corruption in ip_tunnel driver, and use skb_push()
          instead of __skb_push() so that similar bugs are less hard to find.
          From Steffen Klassert.
      
      24) Add forgotten hookup of rtnl_ops in SIT and ip6tnl drivers, from
          Nicolas Dichtel.
      
      25) fq scheduler doesn't accurately rate limit in certain circumstances,
          from Eric Dumazet.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits)
        pkt_sched: fq: rate limiting improvements
        ip6tnl: allow to use rtnl ops on fb tunnel
        sit: allow to use rtnl ops on fb tunnel
        ip_tunnel: Remove double unregister of the fallback device
        ip_tunnel_core: Change __skb_push back to skb_push
        ip_tunnel: Add fallback tunnels to the hash lists
        ip_tunnel: Fix a memory corruption in ip_tunnel_xmit
        qlcnic: Fix SR-IOV configuration
        ll_temac: Reset dma descriptors indexes on ndo_open
        skbuff: size of hole is wrong in a comment
        ipv6 mcast: use in6_dev_put in timer handlers instead of __in6_dev_put
        ipv4 igmp: use in_dev_put in timer handlers instead of __in_dev_put
        ethernet: moxa: fix incorrect placement of __initdata tag
        ipv6: gre: correct calculation of max_headroom
        powerpc/83xx: gianfar_ptp: select 1588 clock source through dts file
        Revert "powerpc/83xx: gianfar_ptp: select 1588 clock source through dts file"
        bonding: Fix broken promiscuity reference counting issue
        tcp: TSQ can use a dynamic limit
        dm9601: fix IFF_ALLMULTI handling
        pkt_sched: fq: qdisc dismantle fixes
        ...
      c31eeace
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc · 0b936842
      Linus Torvalds authored
      Pull sparc fix from David Miller:
       "Just a single bug fix to a regression added during some strlcpy()
        conversions"
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
        sparc64: Fix buggy strlcpy() conversion in ldom_reboot().
      0b936842
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · 517bf8fc
      Linus Torvalds authored
      Pull vfs lru leak fix from Al Viro:
       "The fix in "super: fix for destroy lrus" didn't - they need to be
        destroyed, all right, but that's the wrong place..."
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
        fs/super.c: fix lru_list leak for real
      517bf8fc
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/virt/kvm/kvm · 77c4ad8e
      Linus Torvalds authored
      Pull two KVM fixes from Gleb Natapov.
      
      * git://git.kernel.org/pub/scm/virt/kvm/kvm:
        KVM: VMX: do not check bit 12 of EPT violation exit qualification when undefined
        ARM: kvm: rename cpu_reset to avoid name clash
      77c4ad8e
    • Al Viro's avatar
      fs/super.c: fix lru_list leak for real · c2d22ecd
      Al Viro authored
      Freeing ->s_{inode,dentry}_lru in deactivate_locked_super() is wrong;
      the right place is destroy_super().  As it is, we leak them if sget()
      decides that new superblock it has allocated (and never shown to
      anybody) isn't needed and should be freed.
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      c2d22ecd
    • Eric Dumazet's avatar
      pkt_sched: fq: rate limiting improvements · 0eab5eb7
      Eric Dumazet authored
      FQ rate limiting suffers from two problems, reported
      by Steinar :
      
      1) FQ enforces a delay when flow quantum is exhausted in order
      to reduce cpu overhead. But if packets are small, current
      delay computation is slightly wrong, and observed rates can
      be too high.
      
      Steinar had this problem because he disabled TSO and GSO,
      and default FQ quantum is 2*1514.
      
      (Of course, I wish recent TSO auto sizing changes will help
      to not having to disable TSO in the first place)
      
      2) maxrate was not used for forwarded flows (skbs not attached
      to a socket)
      
      Tested:
      
      tc qdisc add dev eth0 root est 1sec 4sec fq maxrate 8Mbit
      netperf -H lpq84 -l 1000 &
      sleep 10 ; tc -s qdisc show dev eth0
      qdisc fq 8003: root refcnt 32 limit 10000p flow_limit 100p buckets 1024
       quantum 3028 initial_quantum 15140 maxrate 8000Kbit
       Sent 16819357 bytes 11258 pkt (dropped 0, overlimits 0 requeues 0)
       rate 7831Kbit 653pps backlog 7570b 5p requeues 0
        44 flows (43 inactive, 1 throttled), next packet delay 2977352 ns
        0 gc, 0 highprio, 5545 throttled
      
      lpq83:~# tcpdump -p -i eth0 host lpq84 -c 12
      09:02:52.079484 IP lpq83 > lpq84: . 1389536928:1389538376(1448) ack 3808678021 win 457 <nop,nop,timestamp 961812 572609068>
      09:02:52.079499 IP lpq83 > lpq84: . 1448:2896(1448) ack 1 win 457 <nop,nop,timestamp 961812 572609068>
      09:02:52.079906 IP lpq84 > lpq83: . ack 2896 win 16384 <nop,nop,timestamp 572609080 961812>
      09:02:52.082568 IP lpq83 > lpq84: . 2896:4344(1448) ack 1 win 457 <nop,nop,timestamp 961815 572609071>
      09:02:52.082581 IP lpq83 > lpq84: . 4344:5792(1448) ack 1 win 457 <nop,nop,timestamp 961815 572609071>
      09:02:52.083017 IP lpq84 > lpq83: . ack 5792 win 16384 <nop,nop,timestamp 572609083 961815>
      09:02:52.085678 IP lpq83 > lpq84: . 5792:7240(1448) ack 1 win 457 <nop,nop,timestamp 961818 572609074>
      09:02:52.085693 IP lpq83 > lpq84: . 7240:8688(1448) ack 1 win 457 <nop,nop,timestamp 961818 572609074>
      09:02:52.086117 IP lpq84 > lpq83: . ack 8688 win 16384 <nop,nop,timestamp 572609086 961818>
      09:02:52.088792 IP lpq83 > lpq84: . 8688:10136(1448) ack 1 win 457 <nop,nop,timestamp 961821 572609077>
      09:02:52.088806 IP lpq83 > lpq84: . 10136:11584(1448) ack 1 win 457 <nop,nop,timestamp 961821 572609077>
      09:02:52.089217 IP lpq84 > lpq83: . ack 11584 win 16384 <nop,nop,timestamp 572609090 961821>
      Reported-by: default avatarSteinar H. Gunderson <sesse@google.com>
      Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0eab5eb7
    • Nicolas Dichtel's avatar
      ip6tnl: allow to use rtnl ops on fb tunnel · bb814094
      Nicolas Dichtel authored
      rtnl ops where introduced by c075b130 ("ip6tnl: advertise tunnel param via
      rtnl"), but I forget to assign rtnl ops to fb tunnels.
      
      Now that it is done, we must remove the explicit call to
      unregister_netdevice_queue(), because  the fallback tunnel is added to the queue
      in ip6_tnl_destroy_tunnels() when checking rtnl_link_ops of all netdevices (this
      is valid since commit 0bd87628 ("ip6tnl: add x-netns support")).
      Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      bb814094
    • Nicolas Dichtel's avatar
      sit: allow to use rtnl ops on fb tunnel · 205983c4
      Nicolas Dichtel authored
      rtnl ops where introduced by ba3e3f50 ("sit: advertise tunnel param via
      rtnl"), but I forget to assign rtnl ops to fb tunnels.
      
      Now that it is done, we must remove the explicit call to
      unregister_netdevice_queue(), because  the fallback tunnel is added to the queue
      in sit_destroy_tunnels() when checking rtnl_link_ops of all netdevices (this
      is valid since commit 5e6700b3 ("sit: add support of x-netns")).
      Signed-off-by: default avatarNicolas Dichtel <nicolas.dichtel@6wind.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      205983c4
    • David S. Miller's avatar
      Merge branch 'intel' · 5229432f
      David S. Miller authored
      Jeff Kirsher says:
      
      ====================
      This series contains updates to ixgbevf, ixgbe and igb.
      
      Don provides 3 patches for ixgbevf where he cleans up a redundant
      read mailbox failure check, adds a new function to wait for receive
      queues to be disabled before disabling NAPI, and move the API
      negotiation so that it occurs in the reset path.  This will allow
      the PF to be informed of the API version earlier.
      
      Jacob provides a ixgbevf and ixgbe patch.  His ixgbevf patch removes
      the use of hw_dbg when the ixgbe_get_regs function is called in ethtool.
      The ixgbe patch renames the LL_EXTENDED_STATS and some of the functions
      required to implement busy polling in order to remove the marketing
      "low latency" blurb which hides what the code actually does.
      
      Leonardo provides a ixgbe patch to add support for DCB registers dump
      using ethtool for 82599 and x540 ethernet controllers.
      
      I (Jeff) provide a ixgbe patch to cleanup whitespace issues seen in a
      code review.
      
      Todd provides for igb to add support for i354 in the ethtool offline
      tests.
      
      Laura provides an igb patch to add the ethtool callbacks necessary to
      configure the number of RSS queues.
      ====================
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5229432f
    • Laura Mihaela Vasilescu's avatar
      igb: Add ethtool support to configure number of channels · 907b7835
      Laura Mihaela Vasilescu authored
      This patch adds the ethtool callbacks necessary to configure the
      number of RSS queues.
      
      The maximum number of queues is in accordance with the datasheets.
      Signed-off-by: default avatarLaura Mihaela Vasilescu <laura.vasilescu@rosedu.org>
      Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      907b7835
    • Fujinaka, Todd's avatar
      igb: Add ethtool offline tests for i354 · a4e979a2
      Fujinaka, Todd authored
      Add the ethtool offline tests for i354 devices.
      Signed-off-by: default avatarTodd Fujinaka <todd.fujinaka@intel.com>
      Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a4e979a2
    • Jacob Keller's avatar
      ixgbe: remove marketing names from busy poll code · b4640030
      Jacob Keller authored
      This patch renames the LL_EXTENDED_STATS and some of the functions required to
      implement busy polling in the ixgbe driver, in order to remove the marketing
      "low latency" blurb which hides what the code actually does.
      
      This furthers work which was requested by Linus Torvalds when the initial busy
      poll code was included in the kernel. The code in the ixgbe driver itself was
      never properly renamed to reflect the change to busy polling as the title.
      Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
      Tested-by: default avatarPhil Schmitt <phillip.j.schmitt@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b4640030
    • Jeff Kirsher's avatar
      ixgbe: Cleanup the use of tabs and spaces · b0007484
      Jeff Kirsher authored
      Cleans up the whitespace issues noticed during code review where
      a mix of tabs and spaces were used for indentation.
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Tested-by: default avatarPhil Schmitt <phillip.j.schmitt@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b0007484
    • Leonardo Potenza's avatar
      ixgbe: ethtool DCB registers dump for 82599 and x540 · 51e409f1
      Leonardo Potenza authored
      Added support for DCB registers dump using ethtool -d option both for
      82599 and x540 ethernet controllers
      Signed-off-by: default avatarLeonardo Potenza <leonardo.potenza@intel.com>
      Signed-off-by: default avatarMaryam Tahhan <maryam.tahhan@intel.com>
      Acked-by: default avatarJohn Fastabend <john.r.fastabend@intel.com>
      Tested-by: default avatarPhil Schmitt <phillip.j.schmitt@intel.com>
      Tested-by: default avatarJack Morgan <jack.morgan@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      51e409f1
    • Don Skidmore's avatar
      ixgbevf: move API neg to reset path · 798e381a
      Don Skidmore authored
      After this patch the API negotiation will occur in the reset path.  So now
      the PF will be informed of the API version earlier.  This will also require
      the mailbox lock to be initialize sooner as well.
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
      Signed-off-by: default avatarDon Skidmore <donald.c.skidmore@intel.com>
      Tested-by: default avatarStephen Ko <stephen.s.ko@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      798e381a
    • Don Skidmore's avatar
      ixgbevf: add wait for Rx queue disable · 858c3dda
      Don Skidmore authored
      New function was added to wait for Rx queues to be disabled before
      disabling NAPI. This function also allows us to  modify
      ixgbevf_rx_desc_queue_enable() to better match ixgbe.  I also cleaned up
      some msleep calls to usleep_range while I was in this code anyway.
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
      Signed-off-by: default avatarDon Skidmore <donald.c.skidmore@intel.com>
      Tested-by: default avatarStephen Ko <stephen.s.ko@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      858c3dda
    • Don Skidmore's avatar
      ixgbevf: cleanup redundant mailbox read failure check · c7bb417d
      Don Skidmore authored
      Since we are already checking for read failure in check_link we don't need
      to do it here. Instead just make sure the watchdog task gets scheduled, if
      we are up, and it can be done there. This will better follow igbvf method
      of handling a mailbox event and message timeout.
      Signed-off-by: default avatarAlexander Duyck <alexander.h.duyck@intel.com>
      Signed-off-by: default avatarDon Skidmore <donald.c.skidmore@intel.com>
      Tested-by: default avatarStephen Ko <stephen.s.ko@intel.com>
      Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c7bb417d