- 17 May, 2017 40 commits
-
-
Bjorn Andersson authored
[ Upstream commit a6566710 ] Clearing the status bit on irq_unmask will discard any pending interrupt that did arrive after the irq_ack, i.e. while the IRQ handler function was executing. Fixes: f365be09 ("pinctrl: Add Qualcomm TLMM driver") Cc: stable@vger.kernel.org Cc: Stephen Boyd <sboyd@codeaurora.org> Reported-by:
Timur Tabi <timur@codeaurora.org> Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com>
-
Adrian Hunter authored
[ Upstream commit e2ebfb21 ] Disabling interrupts for even a millisecond can cause problems for some devices. That can happen when sdhci changes clock frequency because it waits for the clock to become stable under a spin lock. The spin lock is not necessary here. Anything that is racing with changes to the I/O state is already broken. The mmc core already provides synchronization via "claiming" the host. Although the spin lock probably should be removed from the code paths that lead to this point, such a patch would touch too much code to be suitable for stable trees. Consequently, for this patch, just drop the spin lock while waiting. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Tested-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit f5cccf49 ] While running a bind/unbind stress test with the dwc3 usb driver on rk3399, the following crash was observed. Unable to handle kernel NULL pointer dereference at virtual address 00000218 pgd = ffffffc00165f000 [00000218] *pgd=000000000174f003, *pud=000000000174f003, *pmd=0000000001750003, *pte=00e8000001751713 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat rfcomm xt_mark fuse bridge stp llc zram btusb btrtl btbcm btintel bluetooth ip6table_filter mwifiex_pcie mwifiex cfg80211 cdc_ether usbnet r8152 mii joydev snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device ppp_async ppp_generic slhc tun CPU: 1 PID: 29814 Comm: kworker/1:1 Not tainted 4.4.52 #507 Hardware name: Google Kevin (DT) Workqueue: pm pm_runtime_work task: ffffffc0ac540000 ti: ffffffc0af4d4000 task.ti: ffffffc0af4d4000 PC is at autosuspend_check+0x74/0x174 LR is at autosuspend_check+0x70/0x174 ... Call trace: [<ffffffc00080dcc0>] autosuspend_check+0x74/0x174 [<ffffffc000810500>] usb_runtime_idle+0x20/0x40 [<ffffffc000785ae0>] __rpm_callback+0x48/0x7c [<ffffffc000786af0>] rpm_idle+0x1e8/0x498 [<ffffffc000787cdc>] pm_runtime_work+0x88/0xcc [<ffffffc000249bb8>] process_one_work+0x390/0x6b8 [<ffffffc00024abcc>] worker_thread+0x480/0x610 [<ffffffc000251a80>] kthread+0x164/0x178 [<ffffffc0002045d0>] ret_from_fork+0x10/0x40 Source: (gdb) l *0xffffffc00080dcc0 0xffffffc00080dcc0 is in autosuspend_check (drivers/usb/core/driver.c:1778). 1773 /* We don't need to check interfaces that are 1774 * disabled for runtime PM. Either they are unbound 1775 * or else their drivers don't support autosuspend 1776 * and so they are permanently active. 1777 */ 1778 if (intf->dev.power.disable_depth) 1779 continue; 1780 if (atomic_read(&intf->dev.power.usage_count) > 0) 1781 return -EBUSY; 1782 w |= intf->needs_remote_wakeup; Code analysis shows that intf is set to NULL in usb_disable_device() prior to setting actconfig to NULL. At the same time, usb_runtime_idle() does not lock the usb device, and neither does any of the functions in the traceback. This means that there is no protection against a race condition where usb_disable_device() is removing dev->actconfig->interface[] pointers while those are being accessed from autosuspend_check(). To solve the problem, synchronize and validate device state between autosuspend_check() and usb_disconnect(). Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Roger Quadros authored
[ Upstream commit 09424c50 ] The streaming_maxburst module parameter is 0 offset (0..15) so we must add 1 while using it for wBytesPerInterval calculation for the SuperSpeed companion descriptor. Without this host uvcvideo driver will always see the wrong wBytesPerInterval for SuperSpeed uvc gadget and may not find a suitable video interface endpoint. e.g. for streaming_maxburst = 0 case it will always fail as wBytePerInterval was evaluating to 0. Cc: stable@vger.kernel.org Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Marcelo Henrique Cerri authored
[ Upstream commit d82c0d12 ] Reorder the operations in decompress_kernel() to ensure initrd is moved to a safe location before the bss section is zeroed. During decompression bss can overlap with the initrd and this can corrupt the initrd contents depending on the size of the compressed kernel (which affects where the initrd is placed by the bootloader) and the size of the bss section of the decompressor. Also use the correct initrd size when checking for overlaps with parmblock. Fixes: 06c0dd72 ([S390] fix boot failures with compressed kernels) Cc: stable@vger.kernel.org Reviewed-by:
Joy Latten <joy.latten@canonical.com> Reviewed-by:
Vineetha HariPai <vineetha.hari.pai@canonical.com> Signed-off-by:
Marcelo Henrique Cerri <marcelo.cerri@canonical.com> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit c520ff3d ] When snd_seq_pool_done() is called, it marks the closing flag to refuse the further cell insertions. But snd_seq_pool_done() itself doesn't clear the cells but just waits until all cells are cleared by the caller side. That is, it's racy, and this leads to the endless stall as syzkaller spotted. This patch addresses the racy by splitting the setup of pool->closing flag out of snd_seq_pool_done(), and calling it properly before snd_seq_pool_done(). BugLink: http://lkml.kernel.org/r/CACT4Y+aqqy8bZA1fFieifNxR2fAfFQQABcBHj801+u5ePV0URw@mail.gmail.comReported-and-tested-by:
Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
John Garry authored
[ Upstream commit 9702c67c ] The total ata xfer length may not be calculated properly, in that we do not use the proper method to get an sg element dma length. According to the code comment, sg_dma_len() should be used after dma_map_sg() is called. This issue was found by turning on the SMMUv3 in front of the hisi_sas controller in hip07. Multiple sg elements were being combined into a single element, but the original first element length was being use as the total xfer length. Cc: <stable@vger.kernel.org> Fixes: ff2aeb1e ("libata: convert to chained sg") Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 72f31048 ] We don't hold the mmap_sem while searching for VMAs (via find_vma), in kvm_arch_prepare_memory_region, which can end up in expected failures. Fixes: commit 8eef9123 ("arm/arm64: KVM: map MMIO regions at creation time") Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Eric Auger <eric.auger@rehat.com> Cc: stable@vger.kernel.org # v3.18+ Reviewed-by:
Christoffer Dall <cdall@linaro.org> [ Handle dirty page logging failure case ] Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 90f6e150 ] We don't hold the mmap_sem while searching for the VMAs when we try to unmap each memslot for a VM. Fix this properly to avoid unexpected results. Fixes: commit 957db105 ("arm/arm64: KVM: Introduce stage2_unmap_vm") Cc: stable@vger.kernel.org # v3.19+ Reviewed-by:
-
Bjørn Mork authored
[ Upstream commit 436ecf55 ] This is a Dell branded Sierra Wireless EM7455. Cc: <stable@vger.kernel.org> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
[ Upstream commit 5dc855d4 ] If one thread mmaps a perf event while another thread in the same mm is in some context where active_mm != mm (which can happen in the scheduler, for example), refresh_pce() would write the wrong value to CR4.PCE. This broke some PAPI tests. Reported-and-tested-by:
Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bpetkov@suse.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 7911d3f7 ("perf/x86: Only allow rdpmc if a perf_event is mapped") Link: http://lkml.kernel.org/r/0c5b38a76ea50e405f9abe07a13dfaef87c173a1.1489694270.git.luto@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Wang YanQing authored
[ Upstream commit 77dae613 ] While using emacs, cat or others' commands in konsole with recent kernels, I have met many times that CTRL-C freeze konsole. After konsole freeze I can't type anything, then I have to open a new one, it is very annoying. See bug report: https://bugs.kde.org/show_bug.cgi?id=175283 The platform in that bug report is Solaris, but now the pty in linux has the same problem or the same behavior as Solaris :) It has high possibility to trigger the problem follow steps below: Note: In my test, BigFile is a text file whose size is bigger than 1G 1:open konsole 1:cat BigFile 2:CTRL-C After some digging, I find out the reason is that commit 1d1d14da ("pty: Fix buffer flush deadlock") changes the behavior of pty_flush_buffer. Thread A Thread B -------- -------- 1:n_tty_poll return POLLIN 2:CTRL-C trigger pty_flush_buffer tty_buffer_flush n_tty_flush_buffer 3:attempt to check count of chars: ioctl(fd, TIOCINQ, &available) available is equal to 0 4:read(fd, buffer, avaiable) return 0 5:konsole close fd Yes, I know we could use the same patch included in the BUG report as a workaround for linux platform too. But I think the data in ldisc is belong to application of another side, we shouldn't clear it when we want to flush write buffer of this side in pty_flush_buffer. So I think it is better to disable ldisc flush in pty_flush_buffer, because its new hehavior bring no benefit except that it mess up the behavior between POLLIN, and TIOCINQ or FIONREAD. Also I find no flush_buffer function in others' tty driver has the same behavior as current pty_flush_buffer. Fixes: 1d1d14da ("pty: Fix buffer flush deadlock") CC: stable@vger.kernel.org # v4.0+ Signed-off-by:
Wang YanQing <udknight@gmail.com> Signed-off-by:
-
Guenter Roeck authored
[ Upstream commit 7b2db29f ] If usb_get_bos_descriptor() returns an error, usb->bos will be NULL. Nevertheless, it is dereferenced unconditionally in hub_set_initial_usb2_lpm_policy() if usb2_hw_lpm_capable is set. This results in a crash. usb 5-1: unable to get BOS descriptor ... Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = ffffffc00165f000 [00000008] *pgd=000000000174f003, *pud=000000000174f003, *pmd=0000000001750003, *pte=00e8000001751713 Internal error: Oops: 96000005 [#1] PREEMPT SMP Modules linked in: uinput uvcvideo videobuf2_vmalloc cmac [ ... ] CPU: 5 PID: 3353 Comm: kworker/5:3 Tainted: G B 4.4.52 #480 Hardware name: Google Kevin (DT) Workqueue: events driver_set_config_work task: ffffffc0c3690000 ti: ffffffc0ae9a8000 task.ti: ffffffc0ae9a8000 PC is at hub_port_init+0xc3c/0xd10 LR is at hub_port_init+0xc3c/0xd10 ... Call trace: [<ffffffc0007fbbfc>] hub_port_init+0xc3c/0xd10 [<ffffffc0007fbe2c>] usb_reset_and_verify_device+0x15c/0x82c [<ffffffc0007fc5e0>] usb_reset_device+0xe4/0x298 [<ffffffbffc0e3fcc>] rtl8152_probe+0x84/0x9b0 [r8152] [<ffffffc00080ca8c>] usb_probe_interface+0x244/0x2f8 [<ffffffc000774a24>] driver_probe_device+0x180/0x3b4 [<ffffffc000774e48>] __device_attach_driver+0xb4/0xe0 [<ffffffc000772168>] bus_for_each_drv+0xb4/0xe4 [<ffffffc0007747ec>] __device_attach+0xd0/0x158 [<ffffffc000775080>] device_initial_probe+0x24/0x30 [<ffffffc0007739d4>] bus_probe_device+0x50/0xe4 [<ffffffc000770bd0>] device_add+0x414/0x738 [<ffffffc000809fe8>] usb_set_configuration+0x89c/0x914 [<ffffffc00080a120>] driver_set_config_work+0xc0/0xf0 [<ffffffc000249bb8>] process_one_work+0x390/0x6b8 [<ffffffc00024abcc>] worker_thread+0x480/0x610 [<ffffffc000251a80>] kthread+0x164/0x178 [<ffffffc0002045d0>] ret_from_fork+0x10/0x40 Since we don't know anything about LPM capabilities without BOS descriptor, don't attempt to enable LPM if it is not available. Fixes: 890dae88 ("xhci: Enable LPM support only for hardwired ...") Cc: stable <stable@vger.kernel.org> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Oliver Neukum authored
[ Upstream commit cdd7928d ] The gadget code exports the bitfield for serial status changes over the wire in its internal endianness. The fix is to convert to little endian before sending it over the wire. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Tested-by:
家瑋 <momo1208@gmail.com> CC: stable@vger.kernel.org Signed-off-by:
-
peter chang authored
[ Upstream commit bf33f87d ] The user can control the size of the next command passed along, but the value passed to the ioctl isn't checked against the usable max command size. Cc: <stable@vger.kernel.org> Signed-off-by:
Peter Chang <dpf@google.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 92461f5d ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory that lie beyond the end of the endpoint array should a malicious device lack the expected endpoints. Fixes: bdb5c57f ("Input: add sur40 driver for Samsung SUR40... ") Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit cb1b4946 ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Signed-off-by:
-
Johan Hovold authored
[ Upstream commit ba340d7b ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: bba5394a ("Input: add support for Hanwang tablets") Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 5cc4a1a9 ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: aca951a2 ("[PATCH] input-driver-yealink-P1K-usb-phone") Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 1916d319 ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack control-interface endpoints. Fixes: 628329d5 ("Input: add IMS Passenger Control Unit driver") Signed-off-by:
-
Johan Hovold authored
[ Upstream commit ac2ee9ba ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: c04148f9 ("Input: add driver for USB VoIP phones with CM109...") Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 59cf8bed ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory that lie beyond the end of the endpoint array should a malicious device lack the expected endpoints. Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 181302dc ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 53f3a9e2 ("mmc: USB SD Host Controller (USHC) driver") Cc: stable <stable@vger.kernel.org> # 2.6.37 Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 66822d81 ] Higher sclks seem to be unstable on some boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=100222Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit e7cc4865 ] While hunting for clues to a use-after-free, Oleg spotted that perf_event_init_context() can loose an error value with the result that fork() can succeed even though we did not fully inherit the perf event context. Spotted-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: oleg@redhat.com Cc: stable@vger.kernel.org Fixes: 889ff015 ("perf/core: Split context's event group list into pinned and non-pinned lists") Link: http://lkml.kernel.org/r/20170316125823.190342547@infradead.orgSigned-off-by:
-
Rafael J. Wysocki authored
[ Upstream commit 9b4f603e ] There is a missing newline in show_cpuinfo_cur_freq(), so add it, but while at it clean that function up somewhat too. Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
-
Alex Deucher authored
[ Upstream commit 0f424de1 ] OLAND 0x1002:0x6604 0x1028:0x066F 0x00 seems to have problems with higher sclks. Acked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Eric Biggers authored
[ Upstream commit b9cf625d ] If ext4_convert_inline_data() was called on a directory with inline data, the filesystem was left in an inconsistent state (as considered by e2fsck) because the file size was not increased to cover the new block. This happened because the inode was not marked dirty after i_disksize was updated. Fix this by marking the inode dirty at the end of ext4_finish_convert_inline_dir(). This bug was probably not noticed before because most users mark the inode dirty afterwards for other reasons. But if userspace executed FS_IOC_SET_ENCRYPTION_POLICY with invalid parameters, as exercised by 'kvm-xfstests -c adv generic/396', then the inode was never marked dirty after updating i_disksize. Cc: stable@vger.kernel.org # 3.10+ Fixes: 3c47d541Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit 9bbb25af ] Thomas spotted that fixup_pi_state_owner() can return errors and we fail to unlock the rt_mutex in that case. Reported-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Cc: juri.lelli@arm.com Cc: bigeasy@linutronix.de Cc: xlpang@redhat.com Cc: rostedt@goodmis.org Cc: mathieu.desnoyers@efficios.com Cc: jdesfossez@efficios.com Cc: dvhart@infradead.org Cc: bristot@redhat.com Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/20170304093558.867401760@infradead.orgSigned-off-by:
-
Peter Zijlstra authored
[ Upstream commit c236c8e9 ] While working on the futex code, I stumbled over this potential use-after-free scenario. Dmitry triggered it later with syzkaller. pi_mutex is a pointer into pi_state, which we drop the reference on in unqueue_me_pi(). So any access to that pointer after that is bad. Since other sites already do rt_mutex_unlock() with hb->lock held, see for example futex_lock_pi(), simply move the unlock before unqueue_me_pi(). Reported-by:
-
Nicolas Ferre authored
[ Upstream commit 60b89f19 ] On some DDR controllers, compatible with the sama5d3 one, the sequence to enter/exit/re-enter the self-refresh mode adds more constrains than what is currently written in the at91_idle driver. An actual access to the DDR chip is needed between exit and re-enter of this mode which is somehow difficult to implement. This sequence can completely hang the SoC. It is particularly experienced on parts which embed a L2 cache if the code run between IDLE calls fits in it... Moreover, as the intention is to enter and exit pretty rapidly from IDLE, the power-down mode is a good candidate. So now we use power-down instead of self-refresh. As we can simplify the code for sama5d3 compatible DDR controllers, we instantiate a new sama5d3_ddr_standby() function. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Cc: <stable@vger.kernel.org> # v4.1+ Fixes: 017b5522 ("ARM: at91: Add new binding for sama5d3-ddramc") Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Bin Liu authored
[ Upstream commit 0090114d ] The CPPI 4.1 driver polls register to workaround the premature TX interrupt issue, but it causes audio playback underrun when triggered in Isoch transfers. Isoch doesn't do back-to-back transfers, the TX should be done by the time the next transfer is scheduled. So skip this polling workaround for Isoch transfer. Fixes: a655f481 ("usb: musb: musb_cppi41: handle pre-mature TX complete interrupt") Cc: <stable@vger.kernel.org> #4.1+ Reported-by:
Alexandre Bailon <abailon@baylibre.com> Acked-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Samuel Thibault authored
[ Upstream commit 3243367b ] Some USB 2.0 devices erroneously report millisecond values in bInterval. The generic config code manages to catch most of them, but in some cases it's not completely enough. The case at stake here is a USB 2.0 braille device, which wants to announce 10ms and thus sets bInterval to 10, but with the USB 2.0 computation that yields to 64ms. It happens that one can type fast enough to reach this interval and get the device buffers overflown, leading to problematic latencies. The generic config code does not catch this case because the 64ms is considered a sane enough value. This change thus adds a USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL quirk to mark devices which actually report milliseconds in bInterval, and marks Vario Ultra devices as needing it. Signed-off-by:
Samuel Thibault <samuel.thibault@ens-lyon.org> Acked-by:
-
Johan Hovold authored
[ Upstream commit 4ce36271 ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Note that the dereference happens in the cmd and wait_init_done callbacks which are called during probe. Fixes: 1ba47da5 ("uwb: add the i1480 DFU driver") Cc: stable <stable@vger.kernel.org> # 2.6.28 Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit daf229b1 ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Note that the dereference happens in the start callback which is called during probe. Fixes: de520b8b ("uwb: add HWA radio controller driver") Cc: stable <stable@vger.kernel.org> # 2.6.28 Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 03ace948 ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. This specifically fixes the NULL-pointer dereference when probing HWA HC devices. Fixes: df365423 ("wusb: add the Wire Adapter (WA) core") Cc: stable <stable@vger.kernel.org> # 2.6.28 Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: David Vrabel <david.vrabel@csr.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit f259ca3e ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Note that the endpoint access that causes the NULL-deref is currently only used for debugging purposes during probe so the oops only happens when dynamic debugging is enabled. This means the driver could be rewritten to continue to accept device with only two endpoints, should such devices exist. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 1dc56c52 ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should the probed device lack endpoints. Note that this driver does not bind to any devices by default. Fixes: ce21bfe6 ("USB: Add LVS Test device driver") Cc: stable <stable@vger.kernel.org> # 3.17 Cc: Pratyush Anand <pratyush.anand@gmail.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit b0addd3f ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit 68c32f9c ] Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer should a malicious device lack endpoints. Fixes: cf7776dc ("[PATCH] isdn4linux: Siemens Gigaset drivers - direct USB connection") Cc: stable <stable@vger.kernel.org> # 2.6.17 Cc: Hansjoerg Lipp <hjlipp@web.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
