Allow the platform driver to recognize GM20B.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Recognize GM20B and assign the right engines and subdevs.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Add support for GM20B's graphics engine, based on GK20A. Note that this
code alone will not allow the engine to initialize on released devices
which require PMU-assisted secure boot.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

GM20B has a 512-channels FIFO similar to GK104.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

GK20A's initialization was based on GK104, but differences exist in the
way the initial context is built and the initialization process itself.

This patch follows the same initialization sequence as nvgpu performs
to avoid bad surprises. Since the register bundles initialization also
differ considerably from GK104, the register packs are now loaded from
firmware files, again similarly to what is done with nvgpu.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

NVIDIA will officially start providing GR firmwares through
linux-firmware for GPUs that require it. Change the GR firmware lookup
function to use these files.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

These signals and sources have been reverse engineered from CUPTI
(Linux). Graphics signals exposed by PerfKit (Windows only) will be
added later. I need to reverse engineer them and it's a bit painful.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

gk104_pm_ctor() is equal to gf100_pm_ctor().
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This trivial patch makes thing more consistent since hardware signals
names are prefixed by 'pcXX'.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This is going to be very useful for GF100+ because each GPC can
have its own domain of counters.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

According to the tstate calculation in nvkm_clk_tstate(),
the range of tstate is from -(clk->state_nr - 1) to 0,
it mean the tstate is negative value. But in nvkm_pstate_work(),
it use (clk->state_nr - 1 - clk->tstate) to limit pstate,
it's not correct.
This patch fix it to use (clk->state_nr - 1 + clk->tstate) to
limit pstate.
Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

These signals and sources have been reverse engineered from CUPTI
(Linux). Graphics signals exposed by PerfKit (Windows only) will be
added later. I need to reverse engineer them and it's a bit painful.

This commit also adds a new class for GF108 and GF117.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

These signals and sources have been reverse engineered from NVIDIA
PerfKit (Windows) and CUPTI (Linux), they will be used to build complex
hardware events from the userspace.

This commit also adds a new class for GT200.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Samuel Pitoiset <samuel.pitoiset at gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Configuring counters from the userspace require the kernel to handle some
logic related to performance counters. Basically, it has to find a free
slot to assign a counter, to handle extra counting modes like B4/B6 and it
must return and error when it can't configure a counter.

In my opinion, the kernel should not handle all of that logic but it
should only write the configuration sent by the userspace without
checking anything. In other words, it should overwrite the configuration
even if it's already counting and do not return any errors.

This patch allows the userspace to configure a domain instead of
separate counters. This has the advantage to move all of the logic to
the userspace.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This adds a new method NVIF_PERFCTR_V0_INIT which starts a batch of
hardware counters for sampling. This will allow the userspace to start
a monitoring session using the INIT method and to stop it with SAMPLE,
for example before and after a frame is rendered.

This commit temporarily breaks nv_perfmon but this is going to be fixed
with the upcoming patch.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This allows to query the ID, the mask and the user-readable name of
sources for each signal.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

A source (or multiplexer) is a tuple addr+mask+shift which allows to
control a block of signals. The maximum number of sources that a signal
can define is arbitrary limited to 8 and this should be large enough.
This patch allows to define multi-level of sources for a signal.

Each different sources are stored to a global list and will be exposed
to the userspace through the nvif interface in order to avoid conflicts.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset at gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This signal index must be always allowed even if it's not clearly
defined in a domain in order to monitor a counter like 0x03020100
because it's the default value of signals.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

16 bits is large enough to store the maximum number of signals available
for one domain (i.e. 256).
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This will allow to configure performance counters with hardware signal
indexes instead of user-readable names in an upcoming patch.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This allows to query the number of available domains, including the
number of hardware counter and the number of signals per domain.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Since a new class has been introduced to query signals, we can now
return an error when the userspace wants to monitor unknown signals.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This commit introduces the NVIF_IOCTL_NEW_V0_PERFMON class which will be
used in order to query domains, signals and sources. This separates the
querying and the counting interface.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

PDAEMON signals don't have to be exposed by the perfmon engine.
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Tested on a few cards. Probably works quite well for most, given they should
all be GDDR3.
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

This looks surprisingly similar to scripts on earlier cards as well
but they don't seem to work just yet. That... and I don't have any, which
makes it a tough job to reverse engineer.
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Some of the bits in there are similar to the bits in the gt215 rammap.
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Might need some generalisation to < GT200. For those: use at your own risk!
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>