- 31 Mar, 2006 37 commits
-
-
Paolo 'Blaisorblade' Giarrusso authored
Call arch_switch also in switch_to_skas, even if it's, for now, a no-op for that case (and mark this in the comment); this will change soon. Also, arch_switch for TT mode is actually useless when the PT proxy (a complicate debugging instrumentation for TT mode) is not enabled. In fact, it only calls update_debugregs, which checks debugregs_seq against seq (to check if the registers are up-to-date - seq here means a "version number" of the registers). If the ptrace proxy is not enabled, debugregs_seq always stays 0 and update_debugregs will be a no-op. So, optimize this out (the compiler can't do it). Also, I've been disappointed by the fact that it would make a lot of sense if, after calling a successful update_debugregs(current->thread.arch.debugregs_seq), current->thread.arch.debugregs_seq were updated with the new debugregs_seq. But this is not done. Is this a bug or a feature? For all purposes, it seems a bug (otherwise the whole mechanism does not make sense, which is also a possibility to check), which causes some performance only problems (not correctness), since we write_debugregs when not needed. Also, as suggested by Jeff, remove a redundant enabling of SIGVTALRM, comprised in the subsequent local_irq_enable(). I'm just a bit dubious if ordering matters there... Signed-off-by:
Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Acked-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Paolo 'Blaisorblade' Giarrusso authored
ldt-{i386,x86_64}.h is made of two different parts - some code for parsing of LDT descriptors, which is arch-dependant, and the code to handle uml_ldt_t (an LDT block inside UML), which is mostly arch-independant (among x86 and x86_64, at least). Join the common part in a single file (ldt.h) and split the rest away (host_ldt-{i386,x86_64}.h). This is needed because processor.h, with next patches, will start including the LDT descriptor parsing macros in host_ldt.h, but it can't include ldt.h because it uses semaphores (and to define semaphores one must first include processor.h!). Signed-off-by: -
Paolo 'Blaisorblade' Giarrusso authored
Comparing this code which is the actual body of the arch-independent cpu_idle(), it is clear that it's unnecessary to set ->mm and ->active_mm; beyond that, a kernel thread is not supposed to have ->mm != NULL, only active_mm. This showed up because I used the assumption (which is IMHO valid) that kernel thread have their ->mm == NULL, and it failed for this thread. Signed-off-by:
-
Al Viro authored
type-safe min() in arch/um/drivers/mconsole_kern.c Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
Removed assignments to unused variables in arch/um/os-Linux/Makefile Signed-off-by:
-
Al Viro authored
__user annotations (hppfs) Signed-off-by:
-
Al Viro authored
misc sparse annotations Signed-off-by:
-
Al Viro authored
kconfig sanitized around drivers/net Signed-off-by:
-
Al Viro authored
no need to add the same file twice to MRPROPER_FILES Signed-off-by:
-
Al Viro authored
kills unmap magic Signed-off-by:
-
Al Viro authored
kills symlinks in arch/um/sys-* Signed-off-by:
-
Jeff Dike authored
A number of UML initcalls were improperly returning 1. Also removed any nearby emacs formatting comments. Signed-off-by:
-
Jeff Dike authored
The earlier printf patch missed a corresponding change in the printed variable. Signed-off-by:
-
Jeff Dike authored
Changes since first version added check for MADV_REMOVE support on the host fixed error return botch shrunk sprintf array by one character This adds hotplug memory support to UML. The mconsole syntax is config mem=[+-]n[KMG] In other words, add or subtract some number of kilobytes, megabytes, or gigabytes. Unplugged pages are allocated and then madvise(MADV_TRUNCATE), which is a currently experimental madvise extension. These pages are tracked so they can be plugged back in later if the admin decides to give them back. The first page to be unplugged is used to keep track of about 4M of other pages. A list_head is the first thing on this page. The rest is filled with addresses of other unplugged pages. This first page is not madvised, obviously. When this page is filled, the next page is used in a similar way and linked onto a list with the first page. Etc. This whole process reverses when pages are plugged back in. When a tracking page no longer tracks any unplugged pages, then it is next in line for plugging, which is done by freeing pages back to the kernel. Signed-off-by:
-
Pavel Machek authored
strace /bin/bash misbehaves after resume; this fixes it. (akpm: it's scary calling refrigerator() in state TASK_TRACED, but it seems to do the right thing). Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
-
Vivek Goyal authored
Porting the patch I posted for x86_64 to i386. http://marc.theaimsgroup.com/?l=linux-kernel&m=114178139610707&w=2 o While using kdump, after a system crash when second kernel boots, timer vector gets (0x31) locked and CPU does not see timer interrupts travelling from IOAPIC to APIC. Currently it does not lead to boot failure in second kernel as timer interrupts continues to come as ExtInt through LAPIC directly, but fixing it is good in case some boards do not support the other mode. o After a system crash, it is not safe to service interrupts any more, hence interrupts are disabled. This leads to pending interrupts at LAPIC. LAPIC sends these interrupts to the CPU during early boot of second kernel. Other pending interrupts are discarded saying unexpected trap but timer interrupt is serviced and CPU does not issue an LAPIC EOI because it think this interrupt came from i8259 and sends ack to 8259. This leads to vector 0x31 locking as LAPIC does not clear respective ISR and keeps on waiting for EOI. o This patch issues extra EOI for the pending interrupts who have ISR set. o Though today only timer seems to be the special case because in early boot it thinks interrupts are coming from i8259 and uses mask_and_ack_8259A() as ack handler and does not issue LAPIC EOI. But probably doing it in generic manner for all vectors makes sense. Signed-off-by:
Vivek Goyal <vgoyal@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Brian Gerst authored
It's been disabled since v2.1.88 Signed-off-by:
Brian Gerst <bgerst@didntduck.org> Signed-off-by:
-
KAMEZAWA Hiroyuki authored
for_each_cpu() actually iterates across all possible CPUs. We've had mistakes in the past where people were using for_each_cpu() where they should have been iterating across only online or present CPUs. This is inefficient and possibly buggy. We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the future. This patch replaces for_each_cpu with for_each_possible_cpu. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Signed-off-by:
-
Chen, Kenneth W authored
With strict page reservation, I think kernel should enforce number of free hugetlb page don't fall below reserved count. Currently it is possible in the sysctl path. Add proper check in sysctl to disallow that. Signed-off-by:
Ken Chen <kenneth.w.chen@intel.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Chen, Kenneth W authored
git-commit: d5d4b0aa "[PATCH] optimize follow_hugetlb_page" breaks mlock on hugepage areas. I mis-interpret pages argument and made get_page() unconditional. It should only get a ref count when "pages" argument is non-null. Credit goes to Adam Litke who spotted the bug. Signed-off-by:
Adam Litke <agl@us.ibm.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
-
Nick Piggin authored
find_trylock_page() is an odd interface in that it doesn't take a reference like the others. Now that XFS no longer uses it, and its last remaining caller actually wants an elevated refcount, opencode that callsite and schedule find_trylock_page() for removal. Signed-off-by:
Nick Piggin <npiggin@suse.de> Acked-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Christoph Lameter authored
Fix migrate_pages_to() definition. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Petri T. Koistinen authored
Fix an obvious off-by-one error (vmax_mtd[] contains two elements). Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by:
David Woodhouse <dwmw2@infradead.org> Signed-off-by:
-
Herbert Poetzl authored
drivers/mtd/devices/blkmtd.c uses a local declaration of name_to_dev_t() which is inconsistant with the real one. the following patch fixes this by removing the local declaration and including mount.h instead this patch was originally done by Micah Anderson. Signed-off-by:
Herbert Poetzl <herbert@13thfloor.at> Acked-by:
Micah Anderson <micah@riseup.net> Acked-by:
Daniel Hokka Zakrisson <daniel@hozac.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
Peter Korsgaard authored
Redboot simply sets the first character of a fis entry to 0xff on "fis delete". The kernel redboot parser stops parsing on such an entry, and without this patch any entries after a deleted image would not be detected. Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
Pavel Machek authored
This adds flash chip used in Sharp Zaurus sl5500 (collie) to jedec_probe. Values work for read-only access, but I have not figured out how to do read-write. Signed-off-by:
-
Eric Sesterhenn authored
This fixes coverity bug #12. The first two gotos in the function still have the initial value for mtd set. And the third goto just triggers for !mtd Signed-off-by:
Eric Sesterhenn <snakebyte@gmx.de> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
Pavel Machek authored
Kill unneccessary ifdefs in mtdcore.c. Signed-off-by:
-
Eric Sesterhenn / snakebyte authored
Fix a copy/paste bug found by cpminer inside the inftlcore.c file Signed-off-by:
Greg Ungerer <gerg@snapgear.com> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
Atsushi Nemoto authored
Current cmdlinepart.c uses offset value 0 to specify a continuous partition. This prevents creating a second partition starting at 0. For example, I can split 4MB device using "mtdparts=id:2M,2M", but I can not do "mtdparts=id:2M@2M,2M@0" to swap mtd0 and mtd1. This patch introduces special OFFSET_CONTINUOUS value for a continuous partition and allows 0 for offset value. Also this patch replaces 0xffffffff with UINT_MAX for SIZE_REMAINING. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
Tobias Klauser authored
Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove duplicates of the macro. Signed-off-by:
Tobias Klauser <tklauser@nuerscht.ch> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
Adrian Bunk authored
MTD_NAND=m and MTD_NAND_SHARPSL=y or MTD_NAND_NANDSIM=y are illegal combinations that mustn't be allowed. This patch fixes this bug by making MTD_NAND_SHARPSL and MTD_NAND_NANDSIM tristate's. Additionally, it fixes some whitespace damage at these options. Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Acked-by:
"Artem B. Bityutskiy" <dedekind@yandex.ru> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
Adrian Bunk authored
- chips/sharp.c: make two needlessly global functions static - move some declarations to a header file where they belong to Signed-off-by:
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by:
-
Ingo Molnar authored
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by:
-
Andrew Morton authored
drivers/mtd/devices/m25p80.c: In function `m25p80_erase': drivers/mtd/devices/m25p80.c:189: warning: signed size_t format, different type arg (arg 6) Acked-by:
-
Jeff Garzik authored
Woe be unto he who builds their filesystems as modules. Signed-off-by:
Jeff Garzik <jeff@garzik.org> [ Obscure quote from the infamous geek bible? ] Signed-off-by:
-
- 30 Mar, 2006 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6: (24 commits) [PARISC] Fix double free when removing HIL drivers [PARISC] Add atomic_sub_and_test [PARISC] Enabled some NLS modules in a500, b180 and c3000 defconfigs [PARISC] Kill duplicated EXPORT_SYMBOL warnings [PARISC] Move ioremap EXPORT_SYMBOL from parisc_ksyms.c [PARISC] Make local_t use atomic_long_t [PARISC] Update defconfigs [PARISC] Add PREEMPT support [PARISC] More useful readwrite lock helpers [PARISC] Convert HIL drivers to use input_allocate_device [PARISC] Fixup CONFIG_EISA a bit [PARISC] getsockopt should be ENTRY_COMP [PARISC] Remove obsolete CONFIG_DEBUG_IOREMAP [PARISC] Temporary FIXME for ioremapping EISA regions [PARISC] Enable ioremap functionality unconditionally [PARISC] Fix stifb with IOREMAP and a 64-bit kernel [PARISC] Add CONFIG_HPPA_IOREMAP to conditionally enable ioremap [PARISC] Add STRICT_MM_TYPECHECKS [PARISC] Fix IOREMAP with a 64-bit kernel [PARISC] Add parisc implementation of flush_kernel_dcache_page() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mad: RMPP support for additional classes IB/mad: include GID/class when matching receives IB/mthca: Fix section mismatch problems IPoIB: Fix oops with raw sockets IB/mthca: Fix check of size in SRQ creation IB/srp: Fix unmapping of fake scatterlist
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] sata_mv: three bug fixes [PATCH] libata: ata_dev_init_params() fixes [PATCH] libata: Fix interesting use of "extern" and also some bracketing [PATCH] libata: Simplex and other mode filtering logic [PATCH] libata - ATA is both ATA and CFA [PATCH] libata: Add ->set_mode hook for odd drivers [PATCH] libata: BMDMA handling updates [PATCH] libata: kill trailing whitespace [PATCH] libata: add FIXME above ata_dev_xfermask() [PATCH] libata: cosmetic changes in ata_bus_softreset() [PATCH] libata: kill E.D.D.
-
