Hariprasad Kelam says:

====================
octeontx2-af: MAC block fixes for CN10KB

This patch set contains fixes for the issues encountered in testing
CN10KB MAC block RPM_USX.

Patch1: firmware to kernel communication is not working due to wrong
        interrupt configuration. CSR addresses are corrected.

Patch2: NIX to RVU PF mapping errors encountered due to wrong firmware
        config. Corrects this mapping error.

Patch3: Driver is trying to access non exist cgx/lmac which is resulting
        in kernel panic. Address this issue by adding proper checks.

Patch4: MAC features are not getting reset on FLR. Fix the issue by
        resetting the stale config.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

AF driver configures MAC features like internal loopback and PFC upon
receiving the request from PF and its VF netdev. But these
features are not getting reset in FLR.  This patch fixes the issue by
resetting the same.

Fixes: 23999b30 ("octeontx2-af: Enable or disable CGX internal loopback")
Fixes: 1121f6b0 ("octeontx2-af: Priority flow control configuration support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

with the addition of new MAC blocks like CN10K RPM and CN10KB
RPM_USX, LMACs are noncontiguous and CGX blocks are also
noncontiguous. But during RVU driver initialization, the driver
is assuming they are contiguous and trying to access
cgx or lmac with their id which is resulting in kernel panic.

This patch fixes the issue by adding proper checks.

[   23.219150] pc : cgx_lmac_read+0x38/0x70
[   23.219154] lr : rvu_program_channels+0x3f0/0x498
[   23.223852] sp : ffff000100d6fc80
[   23.227158] x29: ffff000100d6fc80 x28: ffff00010009f880 x27:
000000000000005a
[   23.234288] x26: ffff000102586768 x25: 0000000000002500 x24:
fffffffffff0f000

Fixes: 91c6945e ("octeontx2-af: cn10k: Add RPM MAC support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Firmware configures NIX block mapping for all MAC blocks.
The current implementation reads the configuration and
creates the mapping between RVU PF  and NIX blocks. But
this configuration is only valid for silicons that support
multiple blocks. For all other silicons, all MAC blocks
map to NIX0.

This patch corrects the mapping by adding a check for the same.

Fixes: c5a73b63 ("octeontx2-af: Map NIX block from CGX connection")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current design is that, for asynchronous events like link_up and
link_down firmware raises the interrupt to kernel. The previous patch
which added RPM_USX driver has a bug where it uses old csr addresses
for configuring interrupts. Which is resulting in losing interrupts
from source firmware.

This patch fixes the issue by correcting csr addresses.

Fixes: b9d0fedc ("octeontx2-af: cn10kb: Add RPM_USX MAC support")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a comma that should be a semicolon.  The comma is at the end of an
if-body and thus makes the statement after (a bvec_set_page()) conditional
too, resulting in an oops because we didn't fill out the bio_vec[]:

    BUG: kernel NULL pointer dereference, address: 0000000000000008
    #PF: supervisor read access in kernel mode
    #PF: error_code(0x0000) - not-present page
    ...
    Workqueue: nvme_tcp_wq nvme_tcp_io_work [nvme_tcp]
    RIP: 0010:skb_splice_from_iter+0xf1/0x370
    ...
    Call Trace:
     tcp_sendmsg_locked+0x3a6/0xdd0
     tcp_sendmsg+0x31/0x50
     inet_sendmsg+0x47/0x80
     sock_sendmsg+0x99/0xb0
     nvme_tcp_try_send_data+0x149/0x490 [nvme_tcp]
     nvme_tcp_try_send+0x1b7/0x300 [nvme_tcp]
     nvme_tcp_io_work+0x40/0xc0 [nvme_tcp]
     process_one_work+0x21c/0x430
     worker_thread+0x54/0x3e0
     kthread+0xf8/0x130

Fixes: 77698878 ("nvme-tcp: Use sendmsg(MSG_SPLICE_PAGES) rather then sendpage")
Reported-by: Aurelien Aptel <aaptel@nvidia.com>
Link: https://lore.kernel.org/r/253mt0il43o.fsf@mtr-vdi-124.i-did-not-set--mail-host-address--so-tickle-me/Signed-off-by: David Howells <dhowells@redhat.com>
cc: Sagi Grimberg <sagi@grimberg.me>
cc: Willem de Bruijn <willemb@google.com>
cc: Keith Busch <kbusch@kernel.org>
cc: Jens Axboe <axboe@fb.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Chaitanya Kulkarni <kch@nvidia.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: linux-nvme@lists.infradead.org
cc: netdev@vger.kernel.org
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

source.codeaurora.org is no longer accessible and so the reference link
in the documentation is not useful. Use iproute2 instead as it has a
rmnet module for configuration.

Fixes: ceed73a2 ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Sean Tranchetti <quic_stranche@quicinc.com>
Signed-off-by: Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reword slightly now that all MAINTAINERS have access to the commands.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add CDC-ECM support for LARA-R6 01B.

The new LARA-R6 product variant identified by the "01B" string can be
configured (by AT interface) in three different USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial
interface and 1 CDC-ECM virtual network interface
The first 4 interfaces of all the 3 configurations (default, RmNet, ECM)
are the same.

In CDC-ECM mode LARA-R6 01B exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: CDC-ECM interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The line cards array is not freed in the error path of
mlxsw_m_linecards_init(), which can lead to a memory leak. Fix by
freeing the array in the error path, thereby making the error path
identical to mlxsw_m_linecards_fini().

Fixes: 01328e23 ("mlxsw: minimal: Extend module to port mapping with slot index")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230630012647.1078002-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Switch in MAXLEN register stores the maximum size of a data frame.
The MTU size is 18 bytes smaller than the frame size.

The current settings are causing problems with packet forwarding.
This patch fixes the MTU settings to proper values.

Fixes: fb77ffc6 ("net: dsa: vsc73xx: make the MTU configurable")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230628194327.1765644-1-paweldembicki@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

All ibmvnic resets, make a call to netdev_tx_reset_queue() when
re-opening the device. netdev_tx_reset_queue() resets the num_queued
and num_completed byte counters. These stats are used in Byte Queue
Limit (BQL) algorithms. The difference between these two stats tracks
the number of bytes currently sitting on the physical NIC. ibmvnic
increases the number of queued bytes though calls to
netdev_tx_sent_queue() in the drivers xmit function. When, VIOS reports
that it is done transmitting bytes, the ibmvnic device increases the
number of completed bytes through calls to netdev_tx_completed_queue().
It is important to note that the driver batches its transmit calls and
num_queued is increased every time that an skb is added to the next
batch, not necessarily when the batch is sent to VIOS for transmission.

Unlike other reset types, a NON FATAL reset will not flush the sub crq
tx buffers. Therefore, it is possible for the batched skb array to be
partially full. So if there is call to netdev_tx_reset_queue() when
re-opening the device, the value of num_queued (0) would not account
for the skb's that are currently batched. Eventually, when the batch
is sent to VIOS, the call to netdev_tx_completed_queue() would increase
num_completed to a value greater than the num_queued. This causes a
BUG_ON crash:

ibmvnic 30000002: Firmware reports error, cause: adapter problem.
Starting recovery...
ibmvnic 30000002: tx error 600
ibmvnic 30000002: tx error 600
ibmvnic 30000002: tx error 600
ibmvnic 30000002: tx error 600
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:27!
Oops: Exception in kernel mode, sig: 5
[....]
NIP dql_completed+0x28/0x1c0
LR ibmvnic_complete_tx.isra.0+0x23c/0x420 [ibmvnic]
Call Trace:
ibmvnic_complete_tx.isra.0+0x3f8/0x420 [ibmvnic] (unreliable)
ibmvnic_interrupt_tx+0x40/0x70 [ibmvnic]
__handle_irq_event_percpu+0x98/0x270
---[ end trace ]---

Therefore, do not reset the dql stats when performing a NON_FATAL reset.

Fixes: 0d973388 ("ibmvnic: Introduce xmit_more support using batched subCRQ hcalls")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

On systems without MAE permission efx->mae is not initialised,
and trying to lookup an mport results in a NULL pointer
dereference.

Fixes: 25414b2a ("sfc: add devlink port support for ef100")
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Cherry-pick what looks like safe fixes from the bluetooth
net-next PR. The other changes will have to wait for 6.6

Link: https://lore.kernel.org/all/20230627191004.2586540-1-luiz.dentz@gmail.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The ISO Interval on CIS Established Event uses 1.25 ms slots:

    BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E
    page 2304:

      Time = N * 1.25 ms

In addition to that this always update the QoS settings based on CIS
Established Event.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use kmemdup rather than duplicating its implementation.

./net/bluetooth/hci_conn.c:1880:7-14: WARNING opportunity for kmemdup.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=5597Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Adding the device ID from the Asus Ally gets the bluetooth working
on the device.
Signed-off-by: Matthew Anderson <ruinairas1992@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Now that the driver core allows for struct class to be in read-only
memory, move the bt_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at load time.

Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This rework sync_interval to be sync_factor as having sync_interval in
the order of seconds is sometimes not disarable.

Wit sync_factor the application can tell how many SDU intervals it wants
to send an announcement with PA, the EA interval is set to 2 times that
so a factor of 24 of BIG SDU interval of 10ms would look like the
following:

< HCI Command: LE Set Extended Advertising Parameters (0x08|0x0036) plen 25
        Handle: 0x01
        Properties: 0x0000
        Min advertising interval: 480.000 msec (0x0300)
        Max advertising interval: 480.000 msec (0x0300)
        Channel map: 37, 38, 39 (0x07)
        Own address type: Random (0x01)
        Peer address type: Public (0x00)
        Peer address: 00:00:00:00:00:00 (OUI 00-00-00)
        Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
        TX power: Host has no preference (0x7f)
        Primary PHY: LE 1M (0x01)
        Secondary max skip: 0x00
        Secondary PHY: LE 2M (0x02)
        SID: 0x00
        Scan request notifications: Disabled (0x00)
< HCI Command: LE Set Periodic Advertising Parameters (0x08|0x003e) plen 7
        Handle: 1
        Min interval: 240.00 msec (0x00c0)
        Max interval: 240.00 msec (0x00c0)
        Properties: 0x0000
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When receiving a scan response there is no way to know if the remote
device is connectable or not, so when it cannot be merged don't
make any assumption and instead just mark it with a new flag defined as
MGMT_DEV_FOUND_SCAN_RSP so userspace can tell it is a standalone
SCAN_RSP.

Link: https://lore.kernel.org/linux-bluetooth/CABBYNZ+CYMsDSPTxBn09Js3BcdC-x7vZFfyLJ3ppZGGwJKmUTw@mail.gmail.com/
Fixes: c70a7e4c ("Bluetooth: Add support for Not Connectable flag for Device Found events")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If the event has error status, return right error code and don't show
incorrect "response malformed" messages.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When reconfiguring CIG after disconnection of the last CIS, LE Remove
CIG shall be sent before LE Set CIG Parameters.  Otherwise, it fails
because CIG is in the inactive state and not configurable (Core v5.3
Vol 6 Part B Sec. 4.5.14.3). This ordering is currently wrong under
suitable timing conditions, because LE Remove CIG is sent via the
hci_sync queue and may be delayed, but Set CIG Parameters is via
hci_send_cmd.

Make the ordering well-defined by sending also Set CIG Parameters via
hci_sync.

Fixes: 26afbd82 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

A recent commit restored the original (and still documented) semantics
for the HCI_QUIRK_USE_BDADDR_PROPERTY quirk so that the device address
is considered invalid unless an address is provided by firmware.

This specifically means that this flag must only be set for devices with
invalid addresses, but the Broadcom driver has so far been setting this
flag unconditionally.

Fortunately the driver already checks for invalid addresses during setup
and sets the HCI_QUIRK_INVALID_BDADDR flag. Use this flag to indicate
when the address can be overridden by firmware (long term, this should
probably just always be allowed).

Fixes: 6945795b ("Bluetooth: fix use-bdaddr-property quirk")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/lkml/ecef83c8-497f-4011-607b-a63c24764867@samsung.comSigned-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

l2cap_sock_release(sk) frees sk. However, sk's children are still alive
and point to the already free'd sk's address.
To fix this, l2cap_sock_release(sk) also cleans sk's children.

==================================================================
BUG: KASAN: use-after-free in l2cap_sock_ready_cb+0xb7/0x100 net/bluetooth/l2cap_sock.c:1650
Read of size 8 at addr ffff888104617aa8 by task kworker/u3:0/276

CPU: 0 PID: 276 Comm: kworker/u3:0 Not tainted 6.2.0-00001-gef397bd4d5fb-dirty #59
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci2 hci_rx_work
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x72/0x95 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:306 [inline]
 print_report+0x175/0x478 mm/kasan/report.c:417
 kasan_report+0xb1/0x130 mm/kasan/report.c:517
 l2cap_sock_ready_cb+0xb7/0x100 net/bluetooth/l2cap_sock.c:1650
 l2cap_chan_ready+0x10e/0x1e0 net/bluetooth/l2cap_core.c:1386
 l2cap_config_req+0x753/0x9f0 net/bluetooth/l2cap_core.c:4480
 l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5739 [inline]
 l2cap_sig_channel net/bluetooth/l2cap_core.c:6509 [inline]
 l2cap_recv_frame+0xe2e/0x43c0 net/bluetooth/l2cap_core.c:7788
 l2cap_recv_acldata+0x6ed/0x7e0 net/bluetooth/l2cap_core.c:8506
 hci_acldata_packet net/bluetooth/hci_core.c:3813 [inline]
 hci_rx_work+0x66e/0xbc0 net/bluetooth/hci_core.c:4048
 process_one_work+0x4ea/0x8e0 kernel/workqueue.c:2289
 worker_thread+0x364/0x8e0 kernel/workqueue.c:2436
 kthread+0x1b9/0x200 kernel/kthread.c:376
 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
 </TASK>

Allocated by task 288:
 kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 ____kasan_kmalloc mm/kasan/common.c:374 [inline]
 __kasan_kmalloc+0x82/0x90 mm/kasan/common.c:383
 kasan_kmalloc include/linux/kasan.h:211 [inline]
 __do_kmalloc_node mm/slab_common.c:968 [inline]
 __kmalloc+0x5a/0x140 mm/slab_common.c:981
 kmalloc include/linux/slab.h:584 [inline]
 sk_prot_alloc+0x113/0x1f0 net/core/sock.c:2040
 sk_alloc+0x36/0x3c0 net/core/sock.c:2093
 l2cap_sock_alloc.constprop.0+0x39/0x1c0 net/bluetooth/l2cap_sock.c:1852
 l2cap_sock_create+0x10d/0x220 net/bluetooth/l2cap_sock.c:1898
 bt_sock_create+0x183/0x290 net/bluetooth/af_bluetooth.c:132
 __sock_create+0x226/0x380 net/socket.c:1518
 sock_create net/socket.c:1569 [inline]
 __sys_socket_create net/socket.c:1606 [inline]
 __sys_socket_create net/socket.c:1591 [inline]
 __sys_socket+0x112/0x200 net/socket.c:1639
 __do_sys_socket net/socket.c:1652 [inline]
 __se_sys_socket net/socket.c:1650 [inline]
 __x64_sys_socket+0x40/0x50 net/socket.c:1650
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

Freed by task 288:
 kasan_save_stack+0x22/0x50 mm/kasan/common.c:45
 kasan_set_track+0x25/0x30 mm/kasan/common.c:52
 kasan_save_free_info+0x2e/0x50 mm/kasan/generic.c:523
 ____kasan_slab_free mm/kasan/common.c:236 [inline]
 ____kasan_slab_free mm/kasan/common.c:200 [inline]
 __kasan_slab_free+0x10a/0x190 mm/kasan/common.c:244
 kasan_slab_free include/linux/kasan.h:177 [inline]
 slab_free_hook mm/slub.c:1781 [inline]
 slab_free_freelist_hook mm/slub.c:1807 [inline]
 slab_free mm/slub.c:3787 [inline]
 __kmem_cache_free+0x88/0x1f0 mm/slub.c:3800
 sk_prot_free net/core/sock.c:2076 [inline]
 __sk_destruct+0x347/0x430 net/core/sock.c:2168
 sk_destruct+0x9c/0xb0 net/core/sock.c:2183
 __sk_free+0x82/0x220 net/core/sock.c:2194
 sk_free+0x7c/0xa0 net/core/sock.c:2205
 sock_put include/net/sock.h:1991 [inline]
 l2cap_sock_kill+0x256/0x2b0 net/bluetooth/l2cap_sock.c:1257
 l2cap_sock_release+0x1a7/0x220 net/bluetooth/l2cap_sock.c:1428
 __sock_release+0x80/0x150 net/socket.c:650
 sock_close+0x19/0x30 net/socket.c:1368
 __fput+0x17a/0x5c0 fs/file_table.c:320
 task_work_run+0x132/0x1c0 kernel/task_work.c:179
 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0x113/0x120 kernel/entry/common.c:203
 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
 syscall_exit_to_user_mode+0x21/0x50 kernel/entry/common.c:296
 do_syscall_64+0x4c/0x90 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x72/0xdc

The buggy address belongs to the object at ffff888104617800
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 680 bytes inside of
 1024-byte region [ffff888104617800, ffff888104617c00)

The buggy address belongs to the physical page:
page:00000000dbca6a80 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888104614000 pfn:0x104614
head:00000000dbca6a80 order:2 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0
flags: 0x200000000010200(slab|head|node=0|zone=2)
raw: 0200000000010200 ffff888100041dc0 ffffea0004212c10 ffffea0004234b10
raw: ffff888104614000 0000000000080002 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888104617980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888104617a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888104617a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                  ^
 ffff888104617b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888104617b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

Ack: This bug is found by FuzzBT with a modified Syzkaller. Other
contributors are Ruoyu Wu and Hui Peng.
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Devices that lack persistent storage for the device address can indicate
this by setting the HCI_QUIRK_INVALID_BDADDR which causes the controller
to be marked as unconfigured until user space has set a valid address.

The related HCI_QUIRK_USE_BDADDR_PROPERTY was later added to similarly
indicate that the device lacks a valid address but that one may be
specified in the devicetree.

As is clear from commit 7a0e5b15 ("Bluetooth: Add quirk for reading
BD_ADDR from fwnode property") that added and documented this quirk and
commits like de79a9df ("Bluetooth: btqcomsmd: use
HCI_QUIRK_USE_BDADDR_PROPERTY"), the device address of controllers with
this flag should be treated as invalid until user space has had a chance
to configure the controller in case the devicetree property is missing.

As it does not make sense to allow controllers with invalid addresses,
restore the original semantics, which also makes sure that the
implementation is consistent (e.g. get_missing_options() indicates that
the address must be set) and matches the documentation (including
comments in the code, such as, "In case any of them is set, the
controller has to start up as unconfigured.").

Fixes: e668eb1e ("Bluetooth: hci_core: Don't stop BT if the BD address missing in dts")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Devices that lack persistent storage for the device address can indicate
this by setting the HCI_QUIRK_INVALID_BDADDR which causes the controller
to be marked as unconfigured until user space has set a valid address.

Once configured, the device address must be set on every setup for
controllers with HCI_QUIRK_NON_PERSISTENT_SETUP to avoid marking the
controller as unconfigured and requiring the address to be set again.

Fixes: 740011cf ("Bluetooth: Add new quirk for non-persistent setup settings")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix potential use-after-free in l2cap_le_command_rej.
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use le32_to_cpu for ver.soc_id to fix the following
sparse warning.

drivers/bluetooth/btqca.c:640:24: sparse: warning: restricted
__le32 degrades to integer
Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This device is an Inspire branded BT 5.1 USB dongle with a
Realtek RTL8761BU chip using the "Best Buy China" vendor ID.

The device table is as follows:

T:  Bus=01 Lev=01 Prnt=02 Port=09 Cnt=01 Dev#=  7 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=6655 ProdID=8771 Rev=02.00
S:  Manufacturer=Realtek
S:  Product=Bluetooth Radio
S:  SerialNumber=00E04C239987
C:  #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
Signed-off-by: Dan Gora <dan.gora@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing MODULE_FIRMWARE declarations for firmware referenced in
btrtl.c.
Signed-off-by: Dan Gora <dan.gora@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fixes a bug where on the M1 mac mini initramfs-tools fails to
include the necessary firmware into the initrd.

Fixes: c4dab506 ("tg3: Download 57766 EEE service patch firmware")
Signed-off-by: Tobias Heider <me@tobhe.de>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/ZJt7LKzjdz8+dClx@tobhe.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Vladimir Oltean says:

====================
Fix PTP received on wrong port with bridged SJA1105 DSA

Since the changes were made to tag_8021q to support imprecise RX for
bridged ports, the tag_sja1105 driver still prefers the source port
information deduced from the VLAN headers for link-local traffic, even
though the switch can theoretically do better and report the precise
source port.

The problem is that the tagger doesn't know when to trust one source of
information over another, because the INCL_SRCPT option (to "tag" link
local frames) is sometimes enabled and sometimes it isn't.

The first patch makes the switch provide the hardware tag for link local
traffic under all circumstances, and the second patch makes the tagger
always use that hardware tag as primary source of information for link
local packets.
====================

Link: https://lore.kernel.org/r/20230627094207.3385231-1-vladimir.oltean@nxp.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Currently the sja1105 tagging protocol prefers using the source port
information from the VLAN header if that is available, falling back to
the INCL_SRCPT option if it isn't. The VLAN header is available for all
frames except for META frames initiated by the switch (containing RX
timestamps), and thus, the "if (is_link_local)" branch is practically
dead.

The tag_8021q source port identification has become more loose
("imprecise") and will report a plausible rather than exact bridge port,
when under a bridge (be it VLAN-aware or VLAN-unaware). But link-local
traffic always needs to know the precise source port. With incorrect
source port reporting, for example PTP traffic over 2 bridged ports will
all be seen on sockets opened on the first such port, which is incorrect.

Now that the tagging protocol has been changed to make link-local frames
always contain source port information, we can reverse the order of the
checks so that we always give precedence to that information (which is
always precise) in lieu of the tag_8021q VID which is only precise for a
standalone port.

Fixes: d7f9787a ("net: dsa: tag_8021q: add support for imprecise RX based on the VBID")
Fixes: 91495f21 ("net: dsa: tag_8021q: replace the SVL bridging with VLAN-unaware IVL bridging")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Link-local traffic on bridged SJA1105 ports is sometimes tagged by the
hardware with source port information (when the port is under a VLAN
aware bridge).

The tag_8021q source port identification has become more loose
("imprecise") and will report a plausible rather than exact bridge port,
when under a bridge (be it VLAN-aware or VLAN-unaware). But link-local
traffic always needs to know the precise source port.

Modify the driver logic (and therefore: the tagging protocol itself) to
always include the source port information with link-local packets,
regardless of whether the port is standalone, under a VLAN-aware or
VLAN-unaware bridge. This makes it possible for the tagging driver to
give priority to that information over the tag_8021q VLAN header.

The big drawback with INCL_SRCPT is that it makes it impossible to
distinguish between an original MAC DA of 01:80:C2:XX:YY:ZZ and
01:80:C2:AA:BB:ZZ, because the tagger just patches MAC DA bytes 3 and 4
with zeroes. Only if PTP RX timestamping is enabled, the switch will
generate a META follow-up frame containing the RX timestamp and the
original bytes 3 and 4 of the MAC DA. Those will be used to patch up the
original packet. Nonetheless, in the absence of PTP RX timestamping, we
have to live with this limitation, since it is more important to have
the more precise source port information for link-local traffic.

Fixes: d7f9787a ("net: dsa: tag_8021q: add support for imprecise RX based on the VBID")
Fixes: 91495f21 ("net: dsa: tag_8021q: replace the SVL bridging with VLAN-unaware IVL bridging")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Vladimir Oltean says:

====================
Fix PTP packet drops with ocelot-8021q DSA tag protocol

Changes in v2:
- Distinguish between L2 and L4 PTP packets
v1 at:
https://lore.kernel.org/netdev/20230626154003.3153076-1-vladimir.oltean@nxp.com/

Patch 3/3 fixes an issue with the ocelot/felix driver, where it would
drop PTP traffic on RX unless hardware timestamping for that packet type
was enabled.

Fixing that requires the driver to know whether it had previously
configured the hardware to timestamp PTP packets on that port. But it
cannot correctly determine that today using the existing code structure,
so patches 1/3 and 2/3 fix the control path of the code such that
ocelot->ports[port]->trap_proto faithfully reflects whether that
configuration took place.
====================

Link: https://lore.kernel.org/r/20230627163114.3561597-1-vladimir.oltean@nxp.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The driver implements a workaround for the fact that it doesn't have an
IRQ source to tell it whether PTP frames are available through the
extraction registers, for those frames to be processed and passed
towards the network stack. That workaround is to configure the switch,
through felix_hwtstamp_set() -> felix_update_trapping_destinations(),
to create two copies of PTP packets: one sent over Ethernet to the DSA
master, and one to be consumed through the aforementioned CPU extraction
queue registers.

The reason why we want PTP packets to be consumed through the CPU
extraction registers in the first place is because we want to see their
hardware RX timestamp. With tag_8021q, that is only visible that way,
and it isn't visible with the copy of the packet that's transmitted over
Ethernet.

The problem with the workaround implementation is that it drops the
packet received over Ethernet, in expectation of its copy being present
in the CPU extraction registers. However, if felix_hwtstamp_set() hasn't
run (aka PTP RX timestamping is disabled), the driver will drop the
original PTP frame and there will be no copy of it in the CPU extraction
registers. So, the network stack will simply not see any PTP frame.

Look at the port's trapping configuration to see whether the driver has
previously enabled the CPU extraction registers. If it hasn't, just
don't RX timestamp the frame and let it be passed up the stack by DSA,
which is perfectly fine.

Fixes: 0a6f17c6 ("net: dsa: tag_ocelot_8021q: add support for PTP timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

In a future change, the driver will need to determine whether PTP RX
timestamping is enabled on a port (including whether traps were set up
on that port in particular) and that is currently not possible.

The driver supports different RX filters (L2, L4) and kinds of TX
timestamping (one-step, two-step) on its ports, but it saves all
configuration in a single struct hwtstamp_config that is global to the
switch. So, the latest timestamping configuration on one port
(including a request to disable timestamping) affects what gets reported
for all ports, even though the configuration itself is still individual
to each port.

The port timestamping configurations are only coupled because of the
common structure, so replace the hwtstamp_config with a mask of trapped
protocols saved per port. We also have the ptp_cmd to distinguish
between one-step and two-step PTP timestamping, so with those 2 bits of
information we can fully reconstruct a descriptive struct
hwtstamp_config for each port, during the SIOCGHWTSTAMP ioctl.

Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support")
Fixes: 96ca08c0 ("net: mscc: ocelot: set up traps for PTP packets")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

PTP RX timestamping should be enabled when the user requests it, not by
default. If it is enabled by default, it can be problematic when the
ocelot driver is a DSA master, and it sidesteps what DSA tries to avoid
through __dsa_master_hwtstamp_validate().

Additionally, after the change which made ocelot trap PTP packets only
to the CPU at ocelot_hwtstamp_set() time, it is no longer even true that
RX timestamping is enabled by default, because until ocelot_hwtstamp_set()
is called, the PTP traps are actually not set up. So the rx_filter field
of ocelot->hwtstamp_config reflects an incorrect reality.

Fixes: 96ca08c0 ("net: mscc: ocelot: set up traps for PTP packets")
Fixes: 4e3b0468 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Florian Westphal says:

====================
net/sched: act_ipt bug fixes

v3: prefer skb_header() helper in patch 2.  No other changes.
I've retained Acks and RvB-Tags of v2.

While checking if netfilter could be updated to replace selected
instances of NF_DROP with kfree_skb_reason+NF_STOLEN to improve
debugging info via drop monitor I found that act_ipt is incompatible
with such an approach.  Moreover, it lacks multiple sanity checks
to avoid certain code paths that make assumptions that the tc layer
doesn't meet, such as header sanity checks, availability of skb_dst,
skb_nfct() and so on.

act_ipt test in the tc selftest still pass with this applied.

I think that we should consider removal of this module, while
this should take care of all problems, its ipv4 only and I don't
think there are any netfilter targets that lack a native tc
equivalent, even when ignoring bpf.
====================

Link: https://lore.kernel.org/r/20230627123813.3036-1-fw@strlen.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

xtables relies on skb being owned by ip stack, i.e. with ipv4
check in place skb->cb is supposed to be IPCB.

I don't see an immediate problem (REJECT target cannot be used anymore
now that PRE/POSTROUTING hook validation has been fixed), but better be
safe than sorry.

A much better patch would be to either mark act_ipt as
"depends on BROKEN" or remove it altogether. I plan to do this
for -next in the near future.

This tc extension is broken in the sense that tc lacks an
equivalent of NF_STOLEN verdict.

With NF_STOLEN, target function takes complete ownership of skb, caller
cannot dereference it anymore.

ACT_STOLEN cannot be used for this: it has a different meaning, caller
is allowed to dereference the skb.

At this time NF_STOLEN won't be returned by any targets as far as I can
see, but this may change in the future.

It might be possible to work around this via list of allowed
target extensions known to only return DROP or ACCEPT verdicts, but this
is error prone/fragile.

Existing selftest only validates xt_LOG and act_ipt is restricted
to ipv4 so I don't think this action is used widely.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>