Pull gfs2 fix from Andreas Gruenbacher:
 "Fix gfs2 cluster coherency bug"

* tag 'gfs2-v5.3-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Inode dirtying fix

Pull power management fix from Rafael Wysocki:
 "Fix recent regression affecting ACPI device power management"

* tag 'pm-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: PM: Fix regression in acpi_device_set_power()

Pull sound fixes from Takashi Iwai:

 - A further fix for syzcaller issues with USB-audio, addressing NULL
   dereference that was introduced by the recent fix

 - Avoid a long delay at boot with HD-audio when i915 module was built
   but not installed, found on some Debian systems

 - A fix of small race window at PCM draining

* tag 'sound-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Fix gpf in snd_usb_pipe_sanity_check
  ALSA: pcm: fix lost wakeup event scenarios in snd_pcm_drain
  ALSA: hda: Fix 1-minute detection delay when i915 module is not available

Pull drm fixes from Dave Airlie:
 "Thanks to Daniel for handling the email the last couple of weeks, flus
  and break-ins combined to derail me. Surprised nothing materialised
  today to take me out again.

  Just more amdgpu navi fixes, msm fixes and a single nouveau regression
  fix:

  amdgpu:
   - navi10 temperature and pstate fixes
   - vcn dynamic power management fix
   - CS ioctl error handling fix
   - debugfs info leak fix
   - amdkfd VegaM fix

  msm:
   - dma sync call fix
   - mdp5 dsi command mode fix
   - fall-through fixes
   - disabled GPU fix

  nouveau:
   - regression fix for displayport MST support"

* tag 'drm-fixes-2019-08-02' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau: Only release VCPI slots on mode changes
  drm: msm: Fix add_gpu_components
  drm/msm: Annotate intentional switch statement fall throughs
  drm/msm: add support for per-CRTC max_vblank_count on mdp5
  drm/msm: Use the correct dma_sync calls in msm_gem
  drm/amd/powerplay: correct UVD/VCE/VCN power status retrieval
  drm/amd/powerplay: correct Navi10 VCN powergate control (v2)
  drm/amd/powerplay: support VCN powergate status retrieval for SW SMU
  drm/amd/powerplay: support VCN powergate status retrieval on Raven
  drm/amd/powerplay: add new sensor type for VCN powergate status
  drm/amdgpu: fix a potential information leaking bug
  drm/amdgpu: fix error handling in amdgpu_cs_process_fence_dep
  drm/amd/powerplay: enable SW SMU reset functionality
  drm/amd/powerplay: fix null pointer dereference around dpm state relates
  drm/amdgpu/powerplay: use proper revision id for navi
  drm/amd/powerplay: fix temperature granularity error in smu11
  drm/amd/powerplay: add callback function of get_thermal_temperature_range
  drm/amdkfd: Fix byte align on VegaM

Pull clk fixes from Stephen Boyd:
 "A few fixes for code that came in during the merge window or that
  started getting exercised differently this time around:

   - Select regmap MMIO kconfig in spreadtrum driver to avoid compile
     errors

   - Complete kerneldoc on devm_clk_bulk_get_optional()

   - Register an essential clk earlier on mediatek mt8183 SoCs so the
     clocksource driver can use it

   - Fix divisor math in the at91 driver

   - Plug a race in Renesas reset control logic"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: renesas: cpg-mssr: Fix reset control race condition
  clk: sprd: Select REGMAP_MMIO to avoid compile errors
  clk: mediatek: mt8183: Register 13MHz clock earlier for clocksource
  clk: Add missing documentation of devm_clk_bulk_get_optional() argument
  clk: at91: generated: Truncate divisor to GENERATED_MAX_DIV + 1

Pull arm swiotlb support from Christoph Hellwig:
 "This fixes a cascade of regressions that originally started with the
  addition of the ia64 port, but only got fatal once we removed most
  uses of block layer bounce buffering in Linux 4.18.

  The reason is that while the original i386/PAE code that was the first
  architecture that supported > 4GB of memory without an iommu decided
  to leave bounce buffering to the subsystems, which in those days just
  mean block and networking as no one else consumed arbitrary userspace
  memory.

  Later with ia64, x86_64 and other ports we assumed that either an
  iommu or something that fakes it up ("software IOTLB" in beautiful
  Intel speak) is present and that subsystems can rely on that for
  dealing with addressing limitations in devices. Except that the ARM
  LPAE scheme that added larger physical address to 32-bit ARM did not
  follow that scheme and thus only worked by chance and only for block
  and networking I/O directly to highmem.

  Long story, short fix - add swiotlb support to arm when build for LPAE
  platforms, which actuallys turns out to be pretty trivial with the
  modern dma-direct / swiotlb code to fix the Linux 4.18-ish regression"

* tag 'arm-swiotlb-5.3' of git://git.infradead.org/users/hch/dma-mapping:
  arm: use swiotlb for bounce buffering on LPAE configs
  dma-mapping: check pfn validity in dma_common_{mmap,get_sgtable}

Pull dma-mapping regression fixes from Christoph Hellwig:
 "Two related regression fixes for changes from this merge window to fix
  alignment issues introduced in the CMA allocation rework (Nicolin
  Chen)"

* tag 'dma-mapping-5.3-3' of git://git.infradead.org/users/hch/dma-mapping:
  dma-contiguous: page-align the size in dma_free_contiguous()
  dma-contiguous: do not overwrite align in dma_alloc_contiguous()

- Fix the dma_sync calls applied last week (Rob)
- Fix mdp5 dsi command mode (Brian)
- Squash fall through warnings (Jordan)
- Don't add disabled gpu nodes to the of device list (Jeffrey)

Cc: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Brian Masney <masneyb@onstation.org>
Cc: Rob Clark <robdclark@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

# gpg: Signature made Fri 02 Aug 2019 05:54:27 AM AEST
# gpg:                using RSA key 96F70DFDA84A070A
# gpg: Can't check signature: public key not found
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801200439.GV104440@art_vandelay

Looks like a regression got introduced into nv50_mstc_atomic_check()
that somehow didn't get found until now. If userspace changes
crtc_state->active to false but leaves the CRTC enabled, we end up
calling drm_dp_atomic_find_vcpi_slots() using the PBN calculated in
asyh->dp.pbn. However, if the display is inactive we end up calculating
a PBN of 0, which inadvertently causes us to have an allocation of 0.
>From there, if userspace then disables the CRTC afterwards we end up
accidentally attempting to free the VCPI twice:

WARNING: CPU: 0 PID: 1484 at drivers/gpu/drm/drm_dp_mst_topology.c:3336
drm_dp_atomic_release_vcpi_slots+0x87/0xb0 [drm_kms_helper]
RIP: 0010:drm_dp_atomic_release_vcpi_slots+0x87/0xb0 [drm_kms_helper]
Call Trace:
 drm_atomic_helper_check_modeset+0x3f3/0xa60 [drm_kms_helper]
 ? drm_atomic_check_only+0x43/0x780 [drm]
 drm_atomic_helper_check+0x15/0x90 [drm_kms_helper]
 nv50_disp_atomic_check+0x83/0x1d0 [nouveau]
 drm_atomic_check_only+0x54d/0x780 [drm]
 ? drm_atomic_set_crtc_for_connector+0xec/0x100 [drm]
 drm_atomic_commit+0x13/0x50 [drm]
 drm_atomic_helper_set_config+0x81/0x90 [drm_kms_helper]
 drm_mode_setcrtc+0x194/0x6a0 [drm]
 ? vprintk_emit+0x16a/0x230
 ? drm_ioctl+0x163/0x390 [drm]
 ? drm_mode_getcrtc+0x180/0x180 [drm]
 drm_ioctl_kernel+0xaa/0xf0 [drm]
 drm_ioctl+0x208/0x390 [drm]
 ? drm_mode_getcrtc+0x180/0x180 [drm]
 nouveau_drm_ioctl+0x63/0xb0 [nouveau]
 do_vfs_ioctl+0x405/0x660
 ? recalc_sigpending+0x17/0x50
 ? _copy_from_user+0x37/0x60
 ksys_ioctl+0x5e/0x90
 ? exit_to_usermode_loop+0x92/0xe0
 __x64_sys_ioctl+0x16/0x20
 do_syscall_64+0x59/0x190
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
WARNING: CPU: 0 PID: 1484 at drivers/gpu/drm/drm_dp_mst_topology.c:3336
drm_dp_atomic_release_vcpi_slots+0x87/0xb0 [drm_kms_helper]
---[ end trace 4c395c0c51b1f88d ]---
[drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] *ERROR* no VCPI for
[MST PORT:00000000e288eb7d] found in mst state 000000008e642070

So, fix this by doing what we probably should have done from the start: only
call drm_dp_atomic_find_vcpi_slots() when crtc_state->mode_changed is set, so
that VCPI allocations remain for as long as the CRTC is enabled.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 232c9eec ("drm/nouveau: Use atomic VCPI helpers for MST")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Karol Herbst <karolherbst@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: <stable@vger.kernel.org> # v5.1+
Acked-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190801220216.15323-1-lyude@redhat.com

drm-fixes-5.3-2019-07-31:

amdgpu:
- Fix temperature granularity for navi
- Fix stable pstate setting for navi
- Fix VCN DPM enablement on navi
- Fix error handling on CS ioctl when processing dependencies
- Fix possible information leak in debugfs

amdkfd:
- fix memory alignment for VegaM
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190731191648.25729-1-alexander.deucher@amd.com

Commit f850a48a ("ACPI: PM: Allow transitions to D0 to occur in
special cases") overlooked the fact that acpi_power_transition() may
change the power.state value for the target device and if that
happens, it may confuse acpi_device_set_power() and cause it to
omit the _PS0 evaluation which on some systems is necessary to
change power states of devices from low-power to D0.

Fix that by saving the current value of power.state for the
target device before passing it to acpi_power_transition() and
using the saved value in a subsequent check.

Fixes: f850a48a ("ACPI: PM: Allow transitions to D0 to occur in special cases")
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reported-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Tested-by: Mario Limonciello <mario.limonciello@dell.com>

add_gpu_components() adds found GPU nodes from the DT to the match list,
regardless of the status of the nodes.  This is a problem, because if the
nodes are disabled, they should not be on the match list because they will
not be matched.  This prevents display from initing if a GPU node is
defined, but it's status is disabled.

Fix this by checking the node's status before adding it to the match list.

Fixes: dc3ea265 (drm/msm: Drop the gpu binding)
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626180015.45242-1-jeffrey.l.hugo@gmail.com

Explicitly mark intentional fall throughs in switch statements to keep
-Wimplicit-fallthrough from complaining.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1564073588-27386-1-git-send-email-jcrouse@codeaurora.org

The mdp5 drm/kms driver currently does not work on command-mode DSI
panels due to 'vblank wait timed out' errors. This causes a latency
of seconds, or tens of seconds in some cases, before content is shown
on the panel. This hardware does not have the something that we can use
as a frame counter available when running in command mode, so we need to
fall back to using timestamps by setting the max_vblank_count to zero.
This can be done on a per-CRTC basis, so the convert mdp5 to use
drm_crtc_set_max_vblank_count().

This change was tested on a LG Nexus 5 (hammerhead) phone.
Suggested-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531094619.31704-3-masneyb@onstation.org

Pull MMC fixes from Ulf Hansson:

 - sdhci-sprd: Add a missing pm_runtime_put_noidle() to fix deferred
   probe

 - dw_mmc: Fix occasional hang after tuning on eMMC

 - meson-mx-sdio: Fix misuse of GENMASK macro

 - mmc_spi: Fix CRC problems for writes by using BDI_CAP_STABLE_WRITES

* tag 'mmc-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: mmc_spi: Enable stable writes
  mmc: meson-mx-sdio: Fix misuse of GENMASK macro
  mmc: dw_mmc: Fix occasional hang after tuning on eMMC
  mmc: host: sdhci-sprd: Fix the missing pm_runtime_put_noidle()

Pull GPIO fixes from Linus Walleij:
 "Three GPIO fixes, all touching the core, so quite important:

   - Fix the request of active low GPIO line events.

   - Don't issue WARN() stuff on NULL descriptors if the GPIOLIB is
     disabled.

   - Preserve the descriptor flags when setting the initial direction on
     lines"

* tag 'gpio-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib: Preserve desc->flags when setting state
  gpio: don't WARN() on NULL descs if gpiolib is disabled
  gpiolib: fix incorrect IRQ requesting of an active-low lineevent

[subject was: drm/msm: shake fist angrily at dma-mapping]

So, using dma_sync_* for our cache needs works out w/ dma iommu ops, but
it falls appart with dma direct ops.  The problem is that, depending on
display generation, we can have either set of dma ops (mdp4 and dpu have
iommu wired to mdss node, which maps to toplevel drm device, but mdp5
has iommu wired up to the mdp sub-node within mdss).

Fixes this splat on mdp5 devices:

   Unable to handle kernel paging request at virtual address ffffffff80000000
   Mem abort info:
     ESR = 0x96000144
     Exception class = DABT (current EL), IL = 32 bits
     SET = 0, FnV = 0
     EA = 0, S1PTW = 0
   Data abort info:
     ISV = 0, ISS = 0x00000144
     CM = 1, WnR = 1
   swapper pgtable: 4k pages, 48-bit VAs, pgdp=00000000810e4000
   [ffffffff80000000] pgd=0000000000000000
   Internal error: Oops: 96000144 [#1] SMP
   Modules linked in: btqcomsmd btqca bluetooth cfg80211 ecdh_generic ecc rfkill libarc4 panel_simple msm wcnss_ctrl qrtr_smd drm_kms_helper venus_enc venus_dec videobuf2_dma_sg videobuf2_memops drm venus_core ipv6 qrtr qcom_wcnss_pil v4l2_mem2mem qcom_sysmon videobuf2_v4l2 qmi_helpers videobuf2_common crct10dif_ce mdt_loader qcom_common videodev qcom_glink_smem remoteproc bmc150_accel_i2c bmc150_magn_i2c bmc150_accel_core bmc150_magn snd_soc_lpass_apq8016 snd_soc_msm8916_analog mms114 mc nf_defrag_ipv6 snd_soc_lpass_cpu snd_soc_apq8016_sbc industrialio_triggered_buffer kfifo_buf snd_soc_lpass_platform snd_soc_msm8916_digital drm_panel_orientation_quirks
   CPU: 2 PID: 33 Comm: kworker/2:1 Not tainted 5.3.0-rc2 #1
   Hardware name: Samsung Galaxy A5U (EUR) (DT)
   Workqueue: events deferred_probe_work_func
   pstate: 80000005 (Nzcv daif -PAN -UAO)
   pc : __clean_dcache_area_poc+0x20/0x38
   lr : arch_sync_dma_for_device+0x28/0x30
   sp : ffff0000115736a0
   x29: ffff0000115736a0 x28: 0000000000000001
   x27: ffff800074830800 x26: ffff000011478000
   x25: 0000000000000000 x24: 0000000000000001
   x23: ffff000011478a98 x22: ffff800009fd1c10
   x21: 0000000000000001 x20: ffff800075ad0a00
   x19: 0000000000000000 x18: ffff0000112b2000
   x17: 0000000000000000 x16: 0000000000000000
   x15: 00000000fffffff0 x14: ffff000011455d70
   x13: 0000000000000000 x12: 0000000000000028
   x11: 0000000000000001 x10: ffff00001106c000
   x9 : ffff7e0001d6b380 x8 : 0000000000001000
   x7 : ffff7e0001d6b380 x6 : ffff7e0001d6b382
   x5 : 0000000000000000 x4 : 0000000000001000
   x3 : 000000000000003f x2 : 0000000000000040
   x1 : ffffffff80001000 x0 : ffffffff80000000
   Call trace:
    __clean_dcache_area_poc+0x20/0x38
    dma_direct_sync_sg_for_device+0xb8/0xe8
    get_pages+0x22c/0x250 [msm]
    msm_gem_get_and_pin_iova+0xdc/0x168 [msm]
    ...

Fixes the combination of two patches:

Fixes: 0036bc73 (drm/msm: stop abusing dma_map/unmap for cache)
Fixes: 449fa54d (dma-direct: correct the physical addr in dma_direct_sync_sg_for_cpu/device)
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>
[seanpaul changed subject to something more desriptive]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730214633.17820-1-robdclark@gmail.com

Pull mount_capable() fix from Al Viro.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Unbreak mount_capable()

Certain ttys operations (pty_unix98_ops) lack tiocmget() and tiocmset()
functions which are called by the certain HCI UART protocols (hci_ath,
hci_bcm, hci_intel, hci_mrvl, hci_qca) via hci_uart_set_flow_control()
or directly. This leads to an execution at NULL and can be triggered by
an unprivileged user. Fix this by adding a helper function and a check
for the missing tty operations in the protocols code.

This fixes CVE-2019-10207. The Fixes: lines list commits where calls to
tiocm[gs]et() or hci_uart_set_flow_control() were added to the HCI UART
protocols.

Link: https://syzkaller.appspot.com/bug?id=1b42faa2848963564a5b1b7f8c837ea7b55ffa50
Reported-by: syzbot+79337b501d6aa974d0f6@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # v2.6.36+
Fixes: b3190df6 ("Bluetooth: Support for Atheros AR300x serial chip")
Fixes: 118612fb ("Bluetooth: hci_bcm: Add suspend/resume PM functions")
Fixes: ff289559 ("Bluetooth: hci_intel: Add Intel baudrate configuration support")
Fixes: 162f812f ("Bluetooth: hci_uart: Add Marvell support")
Fixes: fa9ad876 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990")
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Yu-Chen, Cho <acho@suse.com>
Tested-by: Yu-Chen, Cho <acho@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

To properly clear the slab on free with slab_want_init_on_free, we walk
the list of free objects using get_freepointer/set_freepointer.

The value we get from get_freepointer may not be valid.  This isn't an
issue since an actual value will get written later but this means
there's a chance of triggering a bug if we use this value with
set_freepointer:

  kernel BUG at mm/slub.c:306!
  invalid opcode: 0000 [#1] PREEMPT PTI
  CPU: 0 PID: 0 Comm: swapper Not tainted 5.2.0-05754-g6471384a #4
  RIP: 0010:kfree+0x58a/0x5c0
  Code: 48 83 05 78 37 51 02 01 0f 0b 48 83 05 7e 37 51 02 01 48 83 05 7e 37 51 02 01 48 83 05 7e 37 51 02 01 48 83 05 d6 37 51 02 01 <0f> 0b 48 83 05 d4 37 51 02 01 48 83 05 d4 37 51 02 01 48 83 05 d4
  RSP: 0000:ffffffff82603d90 EFLAGS: 00010002
  RAX: ffff8c3976c04320 RBX: ffff8c3976c04300 RCX: 0000000000000000
  RDX: ffff8c3976c04300 RSI: 0000000000000000 RDI: ffff8c3976c04320
  RBP: ffffffff82603db8 R08: 0000000000000000 R09: 0000000000000000
  R10: ffff8c3976c04320 R11: ffffffff8289e1e0 R12: ffffd52cc8db0100
  R13: ffff8c3976c01a00 R14: ffffffff810f10d4 R15: ffff8c3976c04300
  FS:  0000000000000000(0000) GS:ffffffff8266b000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: ffff8c397ffff000 CR3: 0000000125020000 CR4: 00000000000406b0
  Call Trace:
   apply_wqattrs_prepare+0x154/0x280
   apply_workqueue_attrs_locked+0x4e/0xe0
   apply_workqueue_attrs+0x36/0x60
   alloc_workqueue+0x25a/0x6d0
   workqueue_init_early+0x246/0x348
   start_kernel+0x3c7/0x7ec
   x86_64_start_reservations+0x40/0x49
   x86_64_start_kernel+0xda/0xe4
   secondary_startup_64+0xb6/0xc0
  Modules linked in:
  ---[ end trace f67eb9af4d8d492b ]---

Fix this by ensuring the value we set with set_freepointer is either NULL
or another value in the chain.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Fixes: 6471384a ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull tracing fixes from Steven Rostedt:
 "Two minor fixes:

   - Fix trace event header include guards, as several did not match the
     #define to the #ifdef

   - Remove a redundant test to ftrace_graph_notrace_addr() that was
     accidentally added"

* tag 'trace-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  fgraph: Remove redundant ftrace_graph_notrace_addr() test
  tracing: Fix header include guards in trace event headers

Pull IPMI fix from Corey Minyard:
 "One necessary fix for an uninitialized variable in the new IPMB driver.

  Nothing else has come in besides things that need to wait until later"

* tag 'for-linus-5.3-2' of git://github.com/cminyard/linux-ipmi:
  Fix uninitialized variable in ipmb_dev_int.c

With the recent iomap write page reclaim deadlock fix, it turns out that the
GLF_DIRTY flag isn't always set when it needs to be anymore: previously, this
happened as a side effect of always adding the inode buffer head to the current
transaction with gfs2_trans_add_meta, but this isn't happening consistently
anymore.  Fix by removing an additional unnecessary gfs2_trans_add_meta call
and by setting the GLF_DIRTY flag in gfs2_iomap_end.

(The GLF_DIRTY flag causes inode_go_sync to flush the transaction log when
syncing out the glock of that inode.  When the flag isn't set, inode_go_sync
will skip inodes, including ones with an i_state of I_DIRTY_PAGES, which will
lead to cluster incoherency.)

In addition, in gfs2_iomap_page_done, if the metadata has changed, mark the
inode as I_DIRTY_DATASYNC to have the inode added to the current transaction:
we don't expect metadata to change here, but let's err on the safe side.

Fixes: d0a22a4b ("gfs2: Fix iomap write page reclaim deadlock");
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

In "consolidate the capability checks in sget_{fc,userns}())" the
wrong argument had been passed to mount_capable() by sget_fc().
That mistake had been further obscured later, when switching
mount_capable() to fs_context has moved the calculation of
bogus argument from sget_fc() to mount_capable() itself.  It
should've been fc->user_ns all along.
Screwed-up-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Christian Brauner <christian@brauner.io>
Tested-by: Christian Brauner <christian@brauner.io>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

VCN should be used for Vega20 later ASICs while UVD and VCE
are for previous ASICs.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

No VCN DPM bit check as that's different from VCN PG. Also
no extra check for possible double enablement/disablement
as that's already done by VCN.

v2: check return value of smu_feature_set_enabled
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Commonly used for VCN powergate status retrieval for SW SMU.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable VCN powergate status report on Raven.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

VCN is widely used in new ASICs and different from tranditional
UVD and VCE.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Coccinelle reports a path that the array "data" is never initialized.
The path skips the checks in the conditional branches when either
of callback functions, read_wave_vgprs and read_wave_sgprs, is not
registered. Later, the uninitialized "data" array is read
in the while-loop below and passed to put_user().

Fix the path by allocating the array with kcalloc().

The patch is simplier than adding a fall-back branch that explicitly
calls memset(data, 0, ...). Also it does not need the multiplication
1024*sizeof(*data) as the size parameter for memset() though there is
no risk of integer overflow.
Signed-off-by: Wang Xiayang <xywang.sjtu@sjtu.edu.cn>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We always need to drop the ctx reference and should check
for errors first and then dereference the fence pointer.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Move SMU irq handler register to sw_init as that's totally
software related. Otherwise, it will prevent SMU reset working.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

DPM state relates are not supported on the new SW SMU ASICs. But still
it's not OK to trigger null pointer dereference on accessing them.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The PCI revision id determines the sku.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

in this patch,
drm/amd/powerplay: add callback function of get_thermal_temperature_range
the driver missed temperature granularity change on other temperature.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

1. the thermal temperature is asic related data, move the code logic to
xxx_ppt.c.
2. replace data structure PP_TemperatureRange with
smu_temperature_range.
3. change temperature uint from temp*1000 to temp (temperature uint).
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This was missed during the addition of VegaM support
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

We already have tested it before. The second one should be removed.
With this change, the performance should have little improvement.

Link: http://lkml.kernel.org/r/20190730140850.7927-1-changbin.du@gmail.com

Cc: stable@vger.kernel.org
Fixes: 9cd2992f ("fgraph: Have set_graph_notrace only affect function_graph tracer")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

These include guards are broken.

Match the #if !define() and #define lines so that they work correctly.

Link: http://lkml.kernel.org/r/20190720103943.16982-1-yamada.masahiro@socionext.com

Fixes: f54d1867 ("dma-buf: Rename struct fence to dma_fence")
Fixes: 2e26ca71 ("tracing: Fix tracepoint.h DECLARE_TRACE() to allow more than one header")
Fixes: e543002f ("qdisc: add tracepoint qdisc:qdisc_dequeue for dequeued SKBs")
Fixes: 95f295f9 ("dmaengine: tegra: add tracepoints to driver")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull dax fix from Dan Williams:
 "Fix a botched manual patch update that got dropped between testing and
  application"

* 'dax-fix-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: Fix missed wakeup in put_unlocked_entry()