1. 10 Jan, 2008 31 commits
  2. 28 Dec, 2007 1 commit
  3. 23 Nov, 2007 2 commits
  4. 17 Nov, 2007 6 commits
    • Linus Torvalds's avatar
      Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86 · 2ffbb837
      Linus Torvalds authored
      * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86:
        x86: simplify "make ARCH=x86" and fix kconfig all.config
        x86: reboot fixup for wrap2c board
        x86: check boundary in count setup resource
        x86: fix reboot with no keyboard attached
        x86: add hpet sanity checks
        x86: on x86_64, correct reading of PC RTC when update in progress in time_64.c
        x86: fix freeze in x86_64 RTC update code in time_64.c
        ntp: fix typo that makes sync_cmos_clock erratic
        Remove x86 merge artifact from top Makefile
        x86: fixup cpu_info array conversion
        x86: show cpuinfo only for online CPUs
        x86: fix cpu-hotplug regression
        x86: ignore the sys_getcpu() tcache parameter
        x86: voyager use correct header file name
        x86: fix smp init sections
        x86: fix voyager_cat_init section
        x86: fix bogus memcpy in es7000_check_dsdt()
      2ffbb837
    • Sam Ravnborg's avatar
      x86: simplify "make ARCH=x86" and fix kconfig all.config · 6840999b
      Sam Ravnborg authored
      Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in
      all.config.
      
      For a fix the diffstat is nice:
       6 files changed, 3 insertions(+), 36 deletions(-)
      
      The patch reverts these commits:
       - 0f855aa6 ("kconfig: add helper to set
         config symbol from environment variable")
       - 2a113281 ("kconfig: use $K64BIT to
         set 64BIT with all*config targets")
      
      Roman Zippel pointed out that kconfig supported string compares so
      the additional complexity introduced by the above two patches were
      not needed.
      
      With this patch we have following behaviour:
      
        # make {allno,allyes,allmod,rand}config [ARCH=...]
        option \ host arch      | 32bit         | 64bit
        =====================================================
        ./.                     | 32bit         | 64bit
        ARCH=x86                | 32bit         | 32bit
        ARCH=i386               | 32bit         | 32bit
        ARCH=x86_64             | 64bit         | 64bit
      
      The general rule are that ARCH= and native architecture takes
      precedence over the configuration.
      
      So make ARCH=i386 [whatever] will always build a 32-bit kernel
      no matter what the configuration says.  The configuration will
      be updated to 32-bit if it was configured to 64-bit and the
      other way around.
      
      This behaviour is consistent with previous behaviour so no
      suprises here.
      
      make ARCH=x86 will per default result in a 32-bit kernel but as
      the only ARCH= value x86 allow the user to select between 32-bit
      and 64-bit using menuconfig.
      Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Cc: Roman Zippel <zippel@linux-m68k.org>
      Cc: Andreas Herrmann <aherrman@arcor.de>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6840999b
    • Sam Ravnborg's avatar
      x86: simplify "make ARCH=x86" and fix kconfig all.config · 80ef88d6
      Sam Ravnborg authored
      Simplify "make ARCH=x86" and fix kconfig so we again
      can set 64BIT in all.config.
      
      For a fix the diffstat is nice:
       6 files changed, 3 insertions(+), 36 deletions(-)
      
      The patch reverts these commits:
      0f855aa6
      -> kconfig: add helper to set config symbol from environment variable
      
      2a113281
      -> kconfig: use $K64BIT to set 64BIT with all*config targets
      
      Roman Zippel pointed out that kconfig supported string
      compares so the additional complexity introduced by the
      above two patches were not needed.
      
      With this patch we have following behaviour:
      
      # make {allno,allyes,allmod,rand}config [ARCH=...]
      option \ host arch      | 32bit         | 64bit
      =====================================================
      ./.                     | 32bit         | 64bit
      ARCH=x86                | 32bit         | 32bit
      ARCH=i386               | 32bit         | 32bit
      ARCH=x86_64             | 64bit         | 64bit
      
      The general rule are that ARCH= and native architecture
      takes precedence over the configuration.
      So make ARCH=i386 [whatever] will always build a 32-bit
      kernel no matter what the configuration says.
      The configuration will be updated to 32-bit if it was
      configured to 64-bit and the other way around.
      
      This behaviour is consistent with previous behaviour so
      no suprises here.
      
      make ARCH=x86 will per default result in a 32-bit kernel
      but as the only ARCH= value x86 allow the user to select
      between 32-bit and 64-bit using menuconfig. 
      Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
      Cc: Roman Zippel <zippel@linux-m68k.org>
      Cc: Andreas Herrmann <aherrman@arcor.de>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ingo Molnar <mingo@redhat.com>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      80ef88d6
    • Denys's avatar
      x86: reboot fixup for wrap2c board · 6d1b30e3
      Denys authored
      Needed to make the wireless board, WRAP2C reboot.
      
      Cc: Ingo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      6d1b30e3
    • Yinghai Lu's avatar
      x86: check boundary in count setup resource · 3d9befd2
      Yinghai Lu authored
      need to check info->res_num less than PCI_BUS_NUM_RESOURCES, so
      info->bus->resource[info->res_num] = res will not beyond of bus resource
      array when acpi returns too many resource entries.
      Signed-off-by: default avatarYinghai Lu <yinghai.lu@sun.com>
      Cc: Greg Kroah-Hartman <gregkh@suse.de>
      Cc: Gary Hade <gary.hade@us.ibm.com>
      Cc: Len Brown <lenb@kernel.org>
      Cc: Ingo Molnar <mingo@elte.hu>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      3d9befd2
    • Truxton Fulton's avatar
      x86: fix reboot with no keyboard attached · 05dfa35e
      Truxton Fulton authored
      Attempt to fix http://bugzilla.kernel.org/show_bug.cgi?id=8378
      
      Hiroto Shibuya wrote to tell me that he has a VIA EPIA-EK10000 which
      suffers from the reboot problem when no keyboard is attached.  My first
      patch works for him:
      
        http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=59f4e7d572980a521b7bdba74ab71b21f5995538
      
      But the latest patch does not work for him :
      
        http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8b93789808756bcc1e5c90c99f1b1ef52f839a51
      
      We found that it was necessary to also set the "disable keyboard" flag in
      the command byte, as the first patch was doing.  The second patch tries to
      minimally modify the command byte, but it is not enough.
      
      Please consider this simple one-line patch to help people with low end VIA
      motherboards reboot when no keyboard is attached.  Hiroto Shibuya has
      verified that this works for him (as I no longer have an afflicted
      machine).
      
      
      Additional discussion:
      
      Note that original patch from Truxton DOES
      disable keyboard and this has been in main tree since 2.6.14, thus it must have
      quite a bit of air time already.
      
      http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.14.y.git;a=commit;h=59f4e7d572980a521b7bdba74ab71b21f5995538
      
      Note that he only mention "System flag" in the description and comment, but
      in the code, "disable keyboard" flag is set.
      
        outb(0x14, 0x60);       /* set "System flag" */
      
      In 2.6.23, he made a change to read the current byte and then mask the flags,
      but along this change,  he only set the "System flag" and dropped the setting
      of "disable keyboard" flag.
      
      http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.23.y.git;a=commit;h=8b93789808756bcc1e5c90c99f1b1ef52f839a51
      
         outb(cmd | 0x04, 0x60); /* set "System flag" */
      
      So my request is to restore the setting of disable keyboard flag which has been
      there since 2.6.14 but disappeared in 2.6.23.
      
      Cc: Lee Garrett <lee-in-berlin@web.de>
      Cc: "Hiroto Shibuya" <hiroto.shibuya@gmail.com>
      Cc: Natalie Protasevich <protasnb@gmail.com>
      Cc: Dmitry Torokhov <dtor@mail.ru>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: "H. Peter Anvin" <hpa@zytor.com>
      Cc: Aristeu Rozanski <aris@ruivo.org>
      Cc: <stable@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      05dfa35e