- 29 Oct, 2021 1 commit
-
-
Pierre-Louis Bossart authored
The same codec seems to have different personalities. ESSX8316 was used for Baytrail/CherryTrail, ESSX8336 seems to be used for AppoloLake, GeminiLake, JasperLake and TigerLake devices. BugLink: https://github.com/thesofproject/linux/issues/2955 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>-e Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20211029011109.23633-1-yung-chuan.liao@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 28 Oct, 2021 2 commits
-
-
Nathan Chancellor authored
Clang warns: sound/soc/qcom/qdsp6/topology.c:465:3: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] default: ^ sound/soc/qcom/qdsp6/topology.c:465:3: note: insert 'break;' to avoid fall-through default: ^ break; 1 warning generated. Clang is a little more pedantic than GCC, which permits implicit fallthroughs to cases that contain just break or return. Clang's version is more in line with the kernel's own stance in deprecated.rst, which states that all switch/case blocks must end in either break, fallthrough, continue, goto, or return. Add the missing break to fix the warning. Link: https://github.com/ClangBuiltLinux/linux/issues/1495Signed-off-by:Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20211027190823.4057382-1-nathan@kernel.orgSigned-off-by:
-
Julian Braha authored
When SND_SOC_AMD_RENOIR_MACH or SND_SOC_AMD_RV_RT5682_MACH are selected, and GPIOLIB is not selected, Kbuild gives the following warnings, respectively: WARNING: unmet direct dependencies detected for SND_SOC_DMIC Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n] Selected by [y]: - SND_SOC_AMD_RENOIR_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_RENOIR [=y] and WARNING: unmet direct dependencies detected for SND_SOC_MAX98357A Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n] Selected by [y]: - SND_SOC_AMD_RV_RT5682_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP3x [=y] && I2C [=y] && CROS_EC [=y] This is because SND_SOC_DMIC and SND_SOC_MAX98357A are selected by SND_SOC_AMD_RV_RT5682_MACH and SND_SOC_AMD_RENOIR_MACH, respectively. However, neither of the selectors depend on or select GPIOLIB, despite their selectees depending on GPIOLIB. These unmet dependency bugs were detected by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution. Signed-off-by:
Julian Braha <julianbraha@gmail.com> Link: https://lore.kernel.org/r/20211027184835.112916-1-julianbraha@gmail.comSigned-off-by:
-
- 27 Oct, 2021 16 commits
-
-
Arnd Bergmann authored
The CONFIG_SND_SOC_AMD_MACH_COMMON has some dependencies that are not checked by the symbols that select it: WARNING: unmet direct dependencies detected for SND_SOC_AMD_MACH_COMMON Depends on [n]: SOUND [=y] && !UML && SND [=m] && SND_SOC [=m] && X86 && PCI [=y] && I2C [=n] Selected by [m]: - SND_SOC_AMD_LEGACY_MACH [=m] && SOUND [=y] && !UML && SND [=m] && SND_SOC [=m] - SND_SOC_AMD_SOF_MACH [=m] && SOUND [=y] && !UML && SND [=m] && SND_SOC [=m] WARNING: unmet direct dependencies detected for SND_SOC_AMD_MACH_COMMON Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && X86 && PCI [=n] && I2C [=m] Selected by [m]: - SND_SOC_AMD_LEGACY_MACH [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] Make this more consistent by adding the same checks everywhere. Fixes: 9d8a7be8 ("ASoC: amd: acp: Add legacy sound card support for Chrome audio") Fixes: 9f84940f ("ASoC: amd: acp: Add SOF audio support on Chrome board") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211027082359.52248-1-arnd@kernel.orgSigned-off-by:
-
Mark Brown authored
Merge series "Make genaral and simple for new sof machine driver" from David Lin <CTLIN0@nuvoton.com>: The series of features will make general and simple for new sof machine driver. David Lin (2): ASoC: nau8825: add set_jack coponment support ASoC: nau8825: add clock management for power saving sound/soc/codecs/nau8825.c | 48 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 46 insertions(+), 2 deletions(-)
-
Mark Brown authored
Merge series "ASoC: minor cleanup of warnings" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Sparse, make W=1 and cppcheck all report minor warnings. The only functional change is in patch7 where the error code is now returned to the caller. Pierre-Louis Bossart (8): ASoC: topology: handle endianness warning ASoC: rt5682s: use 'static' qualifier ASoC: nau8821: fix kernel-doc ASoC: nau8821: clarify out-of-bounds check ASoC: mediatek: remove unnecessary initialization ASoC: mediatek: mt8195: rename shadowed array ASoC: mediatek: mt8195: fix return value ASoC: rockchip: i2s_tdm: improve return value handling sound/soc/codecs/nau8821.c | 6 ++++-- sound/soc/codecs/rt5682s.c | 6 +++--- sound/soc/mediatek/common/mtk-afe-fe-dai.c | 2 +- sound/soc/mediatek/mt8195/mt8195-afe-pcm.c | 4 ++-- sound/soc/mediatek/mt8195/mt8195-dai-etdm.c | 2 +- sound/soc/rockchip/rockchip_i2s_tdm.c | 2 +- sound/soc/soc-topology.c | 2 +- 7 files changed, 13 insertions(+), 11 deletions(-) -- 2.25.1
-
AngeloGioacchino Del Regno authored
The mclk clock is optional, but it's currently using devm_clk_get: simplify the handling by using devm_clk_get_optional instead. Signed-off-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211026081030.422481-1-angelogioacchino.delregno@collabora.comSigned-off-by:
-
Pierre-Louis Bossart authored
We have configurations for this codec on APL, GLK and TGL, somehow the information that some designs rely on JasperLake was not shared. BugLink: https://github.com/thesofproject/linux/issues/3210 Fixes: 790049fb ('ASoC: Intel: soc-acpi: apl/glk/tgl: add entry for devices based on ES8336 codec') Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@intel.com> Signed-off-by:
-
Yang Yingliang authored
In case of error, platform_device_register_data() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: e646b51f ("ASoC: amd: acp: Add callback for machine driver on ACP") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20211027065228.833825-1-yangyingliang@huawei.comSigned-off-by:
-
George Song authored
add max98520 audio amplifier driver Signed-off-by:
George Song <george.song@maximintegrated.com> Link: https://lore.kernel.org/r/20211027001431.363-2-george.song@maximintegrated.comSigned-off-by:
-
George Song authored
add initial bindings for max98520 audio amplifier Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211027001431.363-1-george.song@maximintegrated.comSigned-off-by:
-
Pierre-Louis Bossart authored
cppcheck reports the following warning: sound/soc/rockchip/rockchip_i2s_tdm.c:599:9: warning: Identical condition and return expression 'ret', return value is always 0 [identicalConditionAfterEarlyExit] return ret; ^ sound/soc/rockchip/rockchip_i2s_tdm.c:594:6: note: If condition 'ret' is true, the function will return/exit if (ret) ^ sound/soc/rockchip/rockchip_i2s_tdm.c:599:9: note: Returning identical expression 'ret' return ret; ^ While the code is not wrong, it's clearer to return 0 directly. Signed-off-by: -
Pierre-Louis Bossart authored
cppcheck reports the following warning: sound/soc/mediatek/mt8195/mt8195-dai-etdm.c:1299:10: style: Variable 'ret' is assigned a value that is never used. [unreadVariable] int ret = 0; ^ The suggested change aligns the implementation of mt8195_afe_disable_etdm() with mt8195_afe_enable_etdm() - same negative return value upon error. Signed-off-by: -
Pierre-Louis Bossart authored
cppcheck warning: Checking sound/soc/mediatek/mt8195/mt8195-afe-pcm.c ... sound/soc/mediatek/mt8195/mt8195-afe-pcm.c:2884:35: style: Local variable 'irq_data' shadows outer variable [shadowVariable] struct mtk_base_irq_data const *irq_data; ^ sound/soc/mediatek/mt8195/mt8195-afe-pcm.c:2235:39: note: Shadowed declaration static const struct mtk_base_irq_data irq_data[MT8195_AFE_IRQ_NUM] = { ^ sound/soc/mediatek/mt8195/mt8195-afe-pcm.c:2884:35: note: Shadow variable struct mtk_base_irq_data const *irq_data; ^ Signed-off-by: -
Pierre-Louis Bossart authored
Cppcheck warning: sound/soc/mediatek/common/mtk-afe-fe-dai.c:353:8: style: Variable 'i' is assigned a value that is never used. [unreadVariable] int i = 0; ^ Signed-off-by: -
Pierre-Louis Bossart authored
cppcheck reports a false positive sound/soc/codecs/nau8821.c:390:17: error: Array 'dmic_speed_sel[4]' accessed at index 4, which is out of bounds. [arrayIndexOutOfBounds] dmic_speed_sel[i].param, dmic_speed_sel[i].val); ^ sound/soc/codecs/nau8821.c:378:2: note: After for loop, i has value 4 for (i = 0 ; i < 4 ; i++) ^ sound/soc/codecs/nau8821.c:390:17: note: Array index out of bounds dmic_speed_sel[i].param, dmic_speed_sel[i].val); ^ While the code is not incorrect, we can deal with the out-of-bounds check in a clearer way that makes static analysis happy. Signed-off-by: -
Pierre-Louis Bossart authored
make W=1 reports warnings: sound/soc/codecs/nau8821.c:1192: warning: Function parameter or member 'component' not described in 'nau8821_set_fll' sound/soc/codecs/nau8821.c:1192: warning: Function parameter or member 'pll_id' not described in 'nau8821_set_fll' sound/soc/codecs/nau8821.c:1192: warning: Function parameter or member 'source' not described in 'nau8821_set_fll' sound/soc/codecs/nau8821.c:1192: warning: Excess function parameter 'codec' description in 'nau8821_set_fll' Signed-off-by:
-
Pierre-Louis Bossart authored
Sparse reports the following warnings: sound/soc/codecs/rt5682s.c:44:12: error: symbol 'rt5682s_supply_names' was not declared. Should it be static? sound/soc/codecs/rt5682s.c:74:26: error: symbol 'rt5682s_reg' was not declared. Should it be static? sound/soc/codecs/rt5682s.c:2841:30: error: symbol 'rt5682s_aif1_dai_ops' was not declared. Should it be static? Signed-off-by:
-
Pierre-Louis Bossart authored
Sparse reports the following warning: sound/soc/soc-topology.c:1488:26: error: restricted __le32 degrades to integer Signed-off-by:
-
- 26 Oct, 2021 21 commits
-
-
Mark Brown authored
Merge series "ASoC: cs42l42: Fixes to power-down" from Richard Fitzgerald <rf@opensource.cirrus.com>: Driver probe and remove were inconsistent in what they did to power-down and neither did all steps. In addition to that, neither function prevented the interrupt handler from running during and after power-down. Richard Fitzgerald (2): ASoC: cs42l42: Reset and power-down on remove() and failed probe() ASoC: cs42l42: free_irq() before powering-down on probe() fail sound/soc/codecs/cs42l42.c | 43 +++++++++++++++++++++++++++++++------------ 1 file changed, 31 insertions(+), 12 deletions(-) -- 2.11.0
-
Mark Brown authored
Merge series "Update Lpass digital codec macro drivers" from Srinivasa Rao Mandadapu <srivasam@codeaurora.org>: This patch set is to add support for lpass sc7280 based targets. Upadate compatible name and change of bulk clock voting to optional clock voting in digital codecs va, rx, tx macro drivers. Changes Since V3: -- Removed fixes tag. -- Change signedoff by sequence. Changes Since V2: -- Add Tx macro deafults for lpass sc7280 Changes Since V1: -- Removed individual clock voting and used bulk clock optional. -- Removed volatile changes and fixed default values. -- Typo errors. Srinivasa Rao Mandadapu (5): ASoC: qcom: Add compatible names in va,wsa,rx,tx codec drivers for sc7280 ASoC: qcom: dt-bindings: Add compatible names for lpass sc7280 digital codecs ASoC: codecs: tx-macro: Enable tx top soundwire mic clock ASoC: codecs: tx-macro: Update tx default values ASoC: codecs: Change bulk clock voting to optional voting in digital codecs .../bindings/sound/qcom,lpass-rx-macro.yaml | 4 +++- .../bindings/sound/qcom,lpass-tx-macro.yaml | 4 +++- .../bindings/sound/qcom,lpass-va-macro.yaml | 4 +++- .../bindings/sound/qcom,lpass-wsa-macro.yaml | 4 +++- sound/soc/codecs/lpass-rx-macro.c | 3 ++- sound/soc/codecs/lpass-tx-macro.c | 25 +++++++++++++++++++--- sound/soc/codecs/lpass-va-macro.c | 3 ++- sound/soc/codecs/lpass-wsa-macro.c | 1 + 8 files changed, 39 insertions(+), 9 deletions(-) -- Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative Project. -
Mark Brown authored
Merge series "ASoC: qcom: Add AudioReach support" from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>: Hi Mark, This version is a respin of v10 fixing a build error in 12/17 patch. QCOM SoC relevant non-audio patches in this series has been merged into the Qualcomm drivers-for-5.16 tree, as this series depends those patches an immutable tag is available at: https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/20210927135559.738-6-srinivas.kandagatla@linaro.org This patchset adds ASoC driver support to configure signal processing framework ("AudioReach") which is integral part of Qualcomm next generation audio SDK and will be deployed on upcoming Qualcomm chipsets. It makes use of ASoC Topology to load graphs on to the DSP which is then managed by APM (Audio Processing Manager) service to prepare/start/stop. Here is simplified high-level block diagram of AudioReach: ___________________________________________________________ | CPU (Application Processor) | | +---------+ +---------+ +----------+ | | | q6apm | | q6apm | | q6apm | | | | dais | <------> | | <-----> |lpass-dais| | | +---------+ +---------+ +----------+ | | ^ ^ | | | | +---------+ | | +---------+ v +---------->|topology | | | | q6prm | +---------+ | | | | | |<-------->| GPR | +---------+ | | +---------+ +---------+ | | ^ ^ | | | | | | +----------+ | | | | q6prm | | | | |lpass-clks| | | | +----------+ | | |____________________________|______________________________| | | RPMSG (IPC over GLINK) ____________________________|______________________________ | | | | +-----------------------+ | | | | | | v v q6 (Audio DSP) | |+-----+ +----------------------------------+ | || PRM | | APM (Audio Processing Manager) | | |+-----+ | . Graph Management | | | | . Command Handing | | | | . Event Management | | | | ... | | | +----------------------------------+ | | ^ | |____________________________|______________________________| | | LPASS AIF ____________________________|______________________________ | | Audio I/O | | v | | +--------------------------------------------------+ | | | Audio devices | | | | CODEC | HDMI-TX | PCM | SLIMBUS | I2S |MI2S |...| | | | | | | +--------------------------------------------------+ | |___________________________________________________________| AudioReach has constructs of sub-graph, container and modules. Each sub-graph can have N containers and each Container can have N Modules and connections between them can be linear or non-linear. An audio function can be realized with one or many connected sub-graphs. There are also control/event paths between modules that can be wired up while building graph to achieve various control mechanism between modules. These concepts of Sub-Graph, Containers and Modules are represented in ASoC topology. Here is simple I2S graph with a Write Shared Memory and a Volume control module within a single Subgraph (1) with one Container (1) and 5 modules. ____________________________________________________________ | Sub-Graph [1] | | _______________________________________________________ | | | Container [1] | | | | [WR_SH] -> [PCM DEC] -> [PCM CONV] -> [VOL]-> [I2S-EP]| | | |_______________________________________________________| | |____________________________________________________________| For now this graph is split into two subgraphs to achieve dpcm like below: ________________________________________________ _________________ | Sub-Graph [1] | | Sub-Graph [2] | | ____________________________________________ | | _____________ | | | Container [1] | | | |Container [2]| | | | [WR_SH] -> [PCM DEC] -> [PCM CONV] -> [VOL]| | | | [I2S-EP] | | | |____________________________________________| | | |_____________| | |________________________________________________| |_________________| _________________ | Sub-Graph [3] | | _____________ | | |Container [3]| | | | [DMA-EP] | | | |_____________| | |_________________| This patchset adds very minimal support for AudioReach which includes supporting sub-graphs containing CODEC DMA ports and simple PCM Decoder/Encoder and Logger Modules. Additional capabilities will be built over time to expose features offered by AudioReach. This patchset is Tested on SM8250 SoC based Qualcomm Robotics Platform RB5 and SM9250 MTP with WSA881X Smart Speaker Amplifiers, DMICs connected via VA Macro and WCD938x Codec connected via TX and RX Macro and HDMI audio via I2S. First 10 Patches are mostly reorganization existing Old QDSP Audio Framework code and bindings so that we could reuse them on AudioReach. ASoC topology graphs for DragonBoard RB5 and SM8250 MTP are available at https://git.linaro.org/people/srinivas.kandagatla/audioreach-topology.git/ and Qualcomm AudioReach DSP headers are available at: https://source.codeaurora.org/quic/la/platform/vendor/opensource/arspf-headers Note: There is one false positive warning in this patchset: audioreach.c:80:45: warning: array of flexible structures Thanks, srini Changes since v10: - fix build error during arm64 defconfig build reported by Mark in 12/17 patch for audioreach_tplg_init symbol Srinivas Kandagatla (17): ASoC: dt-bindings: move LPASS dai related bindings out of q6afe ASoC: dt-bindings: move LPASS clocks related bindings out of q6afe ASoC: dt-bindings: rename q6afe.h to q6dsp-lpass-ports.h ASoC: qdsp6: q6afe-dai: move lpass audio ports to common file ASoC: qdsp6: q6afe-clocks: move audio-clocks to common file ASoC: dt-bindings: q6dsp: add q6apm-lpass-dai compatible ASoC: dt-bindings: lpass-clocks: add q6prm clocks compatible ASoC: dt-bindings: add q6apm digital audio stream bindings ASoC: qdsp6: audioreach: add basic pkt alloc support ASoC: qdsp6: audioreach: add q6apm support ASoC: qdsp6: audioreach: add module configuration command helpers ASoC: qdsp6: audioreach: add Kconfig and Makefile ASoC: qdsp6: audioreach: add topology support ASoC: qdsp6: audioreach: add q6apm-dai support ASoC: qdsp6: audioreach: add q6apm lpass dai support ASoC: qdsp6: audioreach: add q6prm support ASoC: qdsp6: audioreach: add support for q6prm-clocks .../devicetree/bindings/sound/qcom,q6afe.txt | 181 --- .../bindings/sound/qcom,q6apm-dai.yaml | 53 + .../sound/qcom,q6dsp-lpass-clocks.yaml | 77 ++ .../sound/qcom,q6dsp-lpass-ports.yaml | 205 +++ include/dt-bindings/sound/qcom,q6afe.h | 203 +-- .../sound/qcom,q6dsp-lpass-ports.h | 208 +++ include/uapi/sound/snd_ar_tokens.h | 208 +++ sound/soc/qcom/Kconfig | 22 + sound/soc/qcom/qdsp6/Makefile | 11 +- sound/soc/qcom/qdsp6/audioreach.c | 1130 +++++++++++++++++ sound/soc/qcom/qdsp6/audioreach.h | 726 +++++++++++ sound/soc/qcom/qdsp6/q6afe-clocks.c | 187 +-- sound/soc/qcom/qdsp6/q6afe-dai.c | 687 +--------- sound/soc/qcom/qdsp6/q6apm-dai.c | 416 ++++++ sound/soc/qcom/qdsp6/q6apm-lpass-dais.c | 260 ++++ sound/soc/qcom/qdsp6/q6apm.c | 822 ++++++++++++ sound/soc/qcom/qdsp6/q6apm.h | 152 +++ sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c | 186 +++ sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.h | 30 + sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c | 627 +++++++++ sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h | 22 + sound/soc/qcom/qdsp6/q6prm-clocks.c | 85 ++ sound/soc/qcom/qdsp6/q6prm.c | 202 +++ sound/soc/qcom/qdsp6/q6prm.h | 78 ++ sound/soc/qcom/qdsp6/topology.c | 1113 ++++++++++++++++ 25 files changed, 6664 insertions(+), 1227 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6apm-dai.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-clocks.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,q6dsp-lpass-ports.yaml create mode 100644 include/dt-bindings/sound/qcom,q6dsp-lpass-ports.h create mode 100644 include/uapi/sound/snd_ar_tokens.h create mode 100644 sound/soc/qcom/qdsp6/audioreach.c create mode 100644 sound/soc/qcom/qdsp6/audioreach.h create mode 100644 sound/soc/qcom/qdsp6/q6apm-dai.c create mode 100644 sound/soc/qcom/qdsp6/q6apm-lpass-dais.c create mode 100644 sound/soc/qcom/qdsp6/q6apm.c create mode 100644 sound/soc/qcom/qdsp6/q6apm.h create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.h create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-ports.c create mode 100644 sound/soc/qcom/qdsp6/q6dsp-lpass-ports.h create mode 100644 sound/soc/qcom/qdsp6/q6prm-clocks.c create mode 100644 sound/soc/qcom/qdsp6/q6prm.c create mode 100644 sound/soc/qcom/qdsp6/q6prm.h create mode 100644 sound/soc/qcom/qdsp6/topology.c -- 2.21.0
-
Geert Uytterhoeven authored
All configuration symbols for AMD Audio ACP conponents depend on X86 && PCI, except for SND_SOC_AMD_ACP_COMMON. Add a dependency on X86 && PCI to SND_SOC_AMD_ACP_COMMON, to prevent asking the user about AMD Audio ACP support when configuring a kernel without X86 or PCI support. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/30fcedce513186bf89f1f2655b665298250fdc66.1635260849.git.geert+renesas@glider.beSigned-off-by:
-
Geert Uytterhoeven authored
If not all of CONFIG_X86, CONFIG_PCI, and CONFIG_I2C are set: WARNING: unmet direct dependencies detected for SND_SOC_AMD_MACH_COMMON Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && X86 && PCI [=y] && I2C [=y] Selected by [y]: - SND_SOC_AMD_LEGACY_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] - SND_SOC_AMD_SOF_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] As SND_SOC_AMD_MACH_COMMON depends on X86 && PCI && I2C, all symbols selecting it should depend on X86 && PCI && I2C, too. Fixes: 9d8a7be8 ("ASoC: amd: acp: Add legacy sound card support for Chrome audio") Fixes: 9f84940f ("ASoC: amd: acp: Add SOF audio support on Chrome board") Signed-off-by: -
Geert Uytterhoeven authored
The build only descends into sound/soc/amd/acp/ if CONFIG_SND_SOC_AMD_ACP_COMMON=y. Hence all later config symbols should depend on SND_SOC_AMD_ACP_COMMON, to prevent asking the user about config symbols for driver code that won't be build anyway. Fixes: 623621a9 ("ASoC: amd: Add common framework to support I2S on ACP SOC") Signed-off-by:
-
Richard Fitzgerald authored
Relying on devm to free the irq handler on probe failure leaves a small window of opportunity for an interrupt to become pending and then the handler to run after the chip has been reset and powered off. For safety cs42l42_probe() should free the irq in the error path. As the irq is now disabled by the driver in probe() and remove() there is no point allocating it as a devres-managed item, so convert to plain non-devres. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20211026125722.10220-3-rf@opensource.cirrus.comSigned-off-by:
-
Richard Fitzgerald authored
Driver remove() should assert RESET and disable the supplies. probe() fail was disabling supplies but it didn't assert reset or put the codec into a power-down state. Signed-off-by:
-
Srinivas Kandagatla authored
Add q6prm clocks using existing qdsp6-audio-clock driver Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by:
-
Srinivas Kandagatla authored
Add support to q6prm (Proxy Resource Manager) module used for clock resources Signed-off-by:
-
Srinivas Kandagatla authored
Add support to Audio port dais on LPASS Audio IP using existing common q6dsp-lpass-ports. Signed-off-by:
-
Srinivas Kandagatla authored
Add support to pcm dais in Audio Process Manager. Signed-off-by:
-
Srinivas Kandagatla authored
Add ASoC topology support in audioreach Signed-off-by:
-
Srinivas Kandagatla authored
Now that all the code for audioreach and q6apm are in at this point to be able to compile, start adding Kconfig and Makefile changes. Signed-off-by:
-
Srinivas Kandagatla authored
Audioreach module configuration helpers, which will be used by the q6apm-dai driver. Signed-off-by:
-
Srinivas Kandagatla authored
Add support to q6apm (Audio Process Manager) component which is core Audioreach service running in the DSP. Signed-off-by:
-
Srinivas Kandagatla authored
Add basic helper functions for AudioReach. Signed-off-by:
-
Srinivas Kandagatla authored
On AudioReach audio Framework, Audio Streams (PCM/Compressed) are managed by Q6APM(Audio Process Manager) service. This patch adds bindings for this DAIs exposed by the DSP. Signed-off-by:
-
Srinivas Kandagatla authored
On AudioReach audio Framework access to LPASS ports is via Q6PRM (Proxy Resource Manager) service, so add a dedicated lpass-clock compatible string for this. Signed-off-by:
-
Srinivas Kandagatla authored
on AudioReach audio Framework access to LPASS ports is via Q6APM(Audio Process Manager) service, so add a dedicated compatible string for this. Signed-off-by:
-
Srinivas Kandagatla authored
Move common parts of q6afe-clocks to q6dsp-lpass-clocks so that we could reuse most of the driver for new Q6DSP audio frameworks. This is to make the code reuseable for new Q6DSP AudioReach framework. Signed-off-by:
-
