- 04 Sep, 2019 7 commits
-
-
Gerd Hoffmann authored
Some helper functions to manage an array of gem objects. v9: use dma_resv_lock_interruptible. v6: - add ticket to struct virtio_gpu_object_array. - add virtio_gpu_array_{lock,unlock}_resv helpers. - add virtio_gpu_array_add_fence helper. v5: some small optimizations (Chia-I Wu). v4: make them virtio-private instead of generic helpers. Signed-off-by:Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Chia-I Wu <olvaffe@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-8-kraxel@redhat.com
-
Gerd Hoffmann authored
Call reservation_object_* directly instead of using ttm_bo_{reserve,unreserve}. v4: check for EINTR only. v3: check for EINTR too. Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Gerd Hoffmann authored
All callers pass no_wait = false. Signed-off-by:
-
Gerd Hoffmann authored
No users left. Signed-off-by:
-
Gerd Hoffmann authored
No need to do the reservation dance, we can just wait on the fence directly. Signed-off-by:
-
Gerd Hoffmann authored
Use drm_gem_reservation_object_wait() in virtio_gpu_wait_ioctl(). This also makes the ioctl run lockless. v9: fix return value. v5: handle lookup failure. v2: use reservation_object_test_signaled_rcu for VIRTGPU_WAIT_NOWAIT. Signed-off-by:
-
Gerd Hoffmann authored
With this gem and ttm will use the same reservation object, so mixing and matching ttm / gem reservation helpers should work fine. Signed-off-by:
-
- 03 Sep, 2019 17 commits
-
-
Lyude Paul authored
Declare local pointer to the drm_dp_link_address_ack_reply struct instead of constantly dereferencing it through the union in txmsg->reply. Then, invert the order of conditionals so we don't have to do the bulk of the work inside them, and can wrap lines even less. Then finally, rearrange variable declarations a bit. Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-16-lyude@redhat.com
-
Lyude Paul authored
* Remove the big ugly have_eomt conditional * Store &mgr->down_rep_recv.initial_hdr in a var to make line wrapping easier * Remove duplicate memset() calls * Actually wrap lines Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by:
-
Lyude Paul authored
There's a couple of changes here, so to summarize: * Remove the big ugly mgr->up_req_recv.have_eomt conditional to save on indenting * Store &mgr->up_req_recv.initial_hdr in a variable so we don't keep going over 80 character long lines * De-duplicate code for calling drm_dp_send_up_ack_reply() and getting the MSTB via it's GUID * Remove all of the duplicate calls to memset() and just use a goto instead * Actually do line wrapping * Remove the unnecessary if (mstb) check before calling drm_dp_mst_topology_put_mstb() - we are guaranteed to always have mstb != NULL at that point in the function Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by:
-
Lyude Paul authored
And it's helper, we'll be using this in just a moment. Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Lyude Paul authored
Which reduces indentation and makes this function more legible. Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by:
-
Lyude Paul authored
Use more pointers so we don't have to write out txmsg->reply.u.path_resources each time. Also, fix line wrapping + rearrange local variables. Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by:
-
Lyude Paul authored
Unfortunately the DP MST helpers do not have much in the way of debugging utilities. So, let's add some! This adds basic debugging output for down sideband requests that we send from the driver, so that we can actually discern what's happening when sideband requests timeout. Since there wasn't really a good way of testing that any of this worked, I ended up writing simple selftests that lightly test sideband message encoding and decoding as well. Enjoy! Changes since v1: * Clean up DO_TEST() and sideband_msg_req_encode_decode() - danvet * Get rid of pr_fmt(), just define a prefix string instead and use drm_printf() * Check highest bit of VCPI in drm_dp_decode_sideband_req() - danvet * Make the switch case order between drm_dp_decode_sideband_req() and drm_dp_encode_sideband_req() the same - danvet * Only check DRM_UT_DP - danvet * Clean up sideband_msg_req_equal() from selftests a bit, and add comments explaining why we can't just use memcmp - danvet Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by:
-
Lyude Paul authored
Noticed this while working on adding a drm_dp_decode_sideband_req(). DP_POWER_DOWN_PHY/DP_POWER_UP_PHY both use the same struct as DP_ENUM_PATH_RESOURCES, so we can just combine their cases. Changes since v2: * Fix commit message Signed-off-by:
-
Lyude Paul authored
A simple convienence function that returns a drm_printer which prints using pr_err() Changes since v1: * Make __drm_printfn_err() more consistent with DRM_ERROR() - danvet Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by:
-
Lyude Paul authored
Yes, apparently we've been testing this for every single driver load for quite a long time now. At least that means our PBN calculation is solid! Anyway, introduce self tests for MST and move this into there. Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by:
-
Lyude Paul authored
This seems to be some leftover detritus from before the port/mstb kref cleanup and doesn't do anything anymore, so get rid of it. Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by:
-
Lyude Paul authored
Makes things easier to read. Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Reviewed-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
We can reduce the critical section in vkms_vblank_simulate under output->lock quite a lot: - hrtimer_forward_now just needs to be ordered correctly wrt drm_crtc_handle_vblank. We already access the hrtimer timestamp without locks. While auditing that I noticed that we don't correctly annotate the read there, so sprinkle a READ_ONCE to make sure the compiler doesn't do anything foolish. - drm_crtc_handle_vblank must stay under the lock to avoid races with drm_crtc_arm_vblank_event. - The access to vkms_ouptut->crc_state also must stay under the lock. - next problem is making sure the output->state structure doesn't get freed too early. First we rely on a given hrtimer being serialized: If we call drm_crtc_handle_vblank, then we are guaranteed that the previous call to vkms_vblank_simulate has completed. The other side of the coin is that the atomic updates waits for the vblank to happen before it releases the old state. Both taken together means that by the time the atomic update releases the old state, the hrtimer won't access it anymore (it might be accessing the new state at the same time, but that's ok). - state is invariant, except the few fields separate protected by state->crc_lock. So no need to hold the lock for that. - finally the queue_work. We need to make sure there's no races with the flush_work, i.e. when we call flush_work we need to guarantee that the hrtimer can't requeue the work again. This is guaranteed by the same vblank/hrtimer ordering guarantees like the reasoning above why state won't be freed too early: flush_work on the old state is called after wait_for_flip_done in the atomic commit code. Therefore we can also move everything after the output->crc_state out of the critical section. Motivated by suggestions from Rodrigo. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190719152314.7706-3-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
It's the recommended version, wait_for_vblanks is a bit a hacky interim thing that predates all the flip_done tracking. It's unfortunately still the default ... Signed-off-by:
-
Daniel Vetter authored
Noticed while reviewing code. I'm not sure whether this might or might not explain some of the missed vblank hilarity we've been seeing on various drivers (but those got tracked down to driver issues, at least mostly). I think those all go through the vblank completion event, which has unconditional barriers - it always takes the spinlock. Therefore no cc stable. v2: - Barrriers are hard, put them in in the right order (Chris). - Improve the comments a bit. v3: Ville noticed that on 32bit we might be breaking up the load/stores, now that the vblank counter has been switched over to be 64 bit. Fix that up by switching to atomic64_t. This this happens so rarely in practice I figured no need to cc: stable ... Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Keith Packard <keithp@keithp.com> References: 570e8696 ("drm: Widen vblank count to 64-bits [v3]") Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Mihail Atanassov authored
Expose node with the name 'aclk_hz' Signed-off-by:
Mihail Atanassov <mihail.atanassov@arm.com> Reviewed-by:
James Qian Wang (Arm Technology China) <james.qian.wang@arm.com> Signed-off-by:
Ayan kumar halder <ayan.halder@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190828110342.45936-1-mihail.atanassov@arm.com
-
Heinrich Fink authored
Store the timestamp of the current vblank in the new field 'time' of the vblank trace event. If the timestamp is calculated by a driver that supports high-precision vblank timing, set the field 'high-prec' to 'true'. User space can now access actual hardware vblank times via the tracing infrastructure. Tracing applications (such as GPUVis, see [0] for related discussion), can use the newly added information to conduct a more accurate analysis of display timing. v2 Fix author name (missing last name) [0] https://github.com/mikesart/gpuvis/issues/30Reviewed-by:
Heinrich Fink <heinrich.fink@daqri.com> Signed-off-by:
-
- 02 Sep, 2019 3 commits
-
-
Linus Walleij authored
The sti_hdmi.c file include <linux/of_gpio.h> despite not even using any GPIOs. What it does use is devm_ioremap_nocache() which comes from <linux/io.h> implicitly by including that header. Fix this up by including the right header instead. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190823071428.6155-1-linus.walleij@linaro.org
-
Dariusz Marcinkiewicz authored
Use the new cec_notifier_conn_(un)register() functions to (un)register the notifier for the HDMI connector, and fill in the cec_connector_info. Changes since v2: Don't invalidate physical address before unregistering the notifier. Signed-off-by:
Dariusz Marcinkiewicz <darekm@google.com> Acked-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
-
Cheng-Yi Chiang authored
In the designware databook, the sequence of enabling audio clock and setting format is not clearly specified. Currently, audio clock is enabled in the end of hw_param ops after setting format. On some monitors, there is a possibility that audio does not come out. Fix this by enabling audio clock in audio_startup ops before hw_param ops setting format. Signed-off-by:
Cheng-Yi Chiang <cychiang@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Jonas Karlman <jonas@kwiboo.se> Tested-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190902035435.44463-1-cychiang@chromium.org
-
- 29 Aug, 2019 2 commits
-
-
Sean Paul authored
Spec says[1] Allocated_PBN is 16 bits [1]- DisplayPort 1.2 Spec, Section 2.11.9.8, Table 2-98 Fixes: ad7f8a1f ("drm/helper: add Displayport multi-stream helper (v0.6)") Cc: Lyude Paul <lyude@redhat.com> Cc: Todd Previte <tprevite@gmail.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190829165223.129662-1-sean@poorly.run
-
Laurent Pinchart authored
The ingenic driver supports DPI panels only at the moment, so hardcode their type to DPI instead of Unknown. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190823212353.29369-1-laurent.pinchart@ideasonboard.com # *** extracted tags *** Reviewed-by:
Sam Ravnborg <sam@ravnborg.org>
-
- 28 Aug, 2019 8 commits
-
-
Boris Brezillon authored
This is part of our attempt to make the bridge chain a double-linked list based on the generic list helpers. In order to do that, we must patch all drivers manipulating the encoder->bridge field directly. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190826152649.13820-9-boris.brezillon@collabora.com
-
Boris Brezillon authored
We are about to add a drm_bridge_state that inherits from drm_private_state which is defined in drm_atomic.h. Problem is, drm_atomic.h includes drm_crtc.h which in turn includes drm_bridge.h, leading to "drm_private_state has incomplete type" error. Let's force all users of the drm_bridge API to explicitly include drm_bridge.h. Signed-off-by:
-
Neil Armstrong authored
Add the suspend and resume hooks to: - save and disable the entire DRM driver on suspend - re-init the entire VPU subsystem on resume, to recover CRTC and pixel generator functionnal usage after DDR suspend, then recover DRM driver state Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190827095825.21015-3-narmstrong@baylibre.com
-
Neil Armstrong authored
Add the suspend and resume hooks to: - reset the whole HDMI glue and HDMI controller on suspend - re-init the HDMI glue and HDMI controller on resume The HDMI glue init is refactored to be re-used from the resume hook. It makes usage of dw_hdmi_resume() to recover a functionnal DDC bus. Signed-off-by:
-
Stephen Rothwell authored
Fixes: 3e93bc2a ("drm/virtio: make resource id workaround runtime switchable.") Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Link: http://patchwork.freedesktop.org/patch/msgid/20190828185516.22b03da8@canb.auug.org.auSigned-off-by:
-
Gerd Hoffmann authored
Split virtqueue_kick() call into virtqueue_kick_prepare(), which requires serialization, and virtqueue_notify(), which does not. Move the virtqueue_notify() call out of the critical section protected by the queue lock. This avoids triggering a vmexit while holding the lock and thereby fixes a rather bad spinlock contention. Suggested-by:
-
Gerd Hoffmann authored
Make the queue functions return void, none of the call sites checks the return value. Signed-off-by:
-
Gerd Hoffmann authored
Use drm_atomic_helper_check_plane_state() to sanity check the plane state. Signed-off-by:
-
- 27 Aug, 2019 3 commits
-
-
Dariusz Marcinkiewicz authored
Fill in the connector info, allowing userspace to associate the CEC device with the drm connector. Tested on a Raspberry Pi 3B. Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190823112427.42394-2-hverkuil-cisco@xs4all.nl
-
Dariusz Marcinkiewicz authored
Use the new cec_notifier_conn_(un)register() functions to (un)register the notifier for the HDMI connector, and fill in the cec_connector_info. Signed-off-by:
-
Dariusz Marcinkiewicz authored
Pass the connector info to the CEC adapter. This makes it possible to associate the CEC adapter with the corresponding drm connector. Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
