Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On very first start we should read out current HW counter values
to make diff based calculations later.
This also should be done each time NIC gets down/up or wakes up
after sleep state. We reset link state explicitly to prevent diffs
from being summed this first time.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reduce timeout from 2 secs to 1 sec. If link is down,
reduce it to 500msec. This speeds up link detection.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This metric comes from HW and is also diff-calculated, like other counters
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Originally they were filled from ring sw counters.
These sometimes incorrectly calculate byte and packet amounts
when using LRO/LSO and jumboframes. Filling ndev counters from
hardware makes them precise.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Device hardware provides only 32bit counters. Using these directly
causes byte counters to overflow soon. A separate nic level structure
with 64 bit counters is now used to collect incrementally all the stats
and report these counters to ethtool stats and ndev stats.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Systems with large MRRS on device (2K, 4K) with high data rates and/or
large MTU, atlantic observes DMA packet buffer overflow. On some systems
that causes PCIe transaction errors, hardware NMIs or datapath freeze.
This patch
1) Limits MRRS from device side to 2K (thats maximum our hardware supports)
2) Limit maximum size of outstanding TX DMA data read requests. This makes
hardware buffers running fine.
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Different hardware device Ids correspond to different maximum speed
available. Extra checks were added for devices D108 and D109 to
remove unsupported speeds from these device capabilities list.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb_complete_tx_timestamp must ingest the skb it is passed. Call
kfree_skb if the skb cannot be enqueued.

Fixes: b245be1f ("net-timestamp: no-payload only sysctl")
Fixes: 9ac25fc0 ("net: fix socket refcounting in skb_complete_tx_timestamp()")
Reported-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julian Wiedmann says:

====================
s390/qeth: fixes 2017-12-13

some more patches for 4.15, that fix multiple issues with IP Takeover
configuration in qeth.
Please queue them up for stable kernels as well (4.9 and newer).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Any modification to the takeover IP-ranges requires that we re-evaluate
which IP addresses are takeover-eligible. Otherwise we might do takeover
for some addresses when we no longer should, or vice-versa.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Modifying the flags of an IP addr object needs to be protected against
eg. concurrent removal of the same object from the IP table.

Fixes: 5f78e29c ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When takeover is switched off, current code clears the 'TAKEOVER' flag on
all IPs. But the flag is also used for RXIP addresses, and those should
not be affected by the takeover mode.
Fix the behaviour by consistenly applying takover logic to NORMAL
addresses only.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Just as for an explicit enable/disable, toggling the takeover mode also
requires that the IP addresses get updated. Otherwise all IPs that were
added to the table before the mode-toggle, get registered with the old
settings.
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

 - Initialize the fragment headers, by Sven Eckelmann

 - Fix a NULL check in BATMAN V, by Sven Eckelmann

 - Fix kernel doc for the time_setup() change, by Sven Eckelmann

 - Use the right lock in BATMAN IV OGM Update, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Learning is currently enabled for ports which are OVS slaves -
even though OVS doesn't need this indication.
Since we're not associating a fid with the port, HW would continuously
notify driver of learned [& aged] MACs which would be logged as errors.

Fixes: 2b94e58d ("mlxsw: spectrum: Allow ports to work under OVS master")
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2017-12-13

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Addition of explicit scheduling points to map alloc/free
   in order to avoid having to hold the CPU for too long,
   from Eric.

2) Fixing of a corruption in overlapping perf_event_output
   calls from different BPF prog types on the same CPU out
   of different contexts, from Daniel.

3) Fallout fixes for recent correction of broken uapi for
   BPF_PROG_TYPE_PERF_EVENT. um had a missing asm header
   that needed to be pulled in from asm-generic and for
   BPF selftests the asm-generic include did not work,
   so similar asm include scheme was adapted for that
   problematic header that perf is having with other
   header files under tools, from Daniel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
mlx4 misc fixes

This patchset contains misc bug fixes from the team
to the mlx4 Core and Eth drivers.

Patch 1 by Eugenia fixes an MTU issue in selftest.
Patch 2 by Eran fixes an accounting issue in the resource tracker.
Patch 3 by Eran fixes a race condition that causes counter inconsistency.

Series generated against net commit:
20080971 fou: fix some member types in guehdr

v2:
Patch 2: Add reviewer credit, rephrase commit message.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Before this patch, the stats_lock was acquired twice. In between the
locks Driver sent command to gather some more statistics (per priority
and counter statistics). If the stats lock was acquired by get
statistics NDO in between we would have report out of sync counters.

Fix this by collecting all stats from Firmware in advance and then
fill the Software structs under one lock.

Fixes: 0b131561 ("net/mlx4_en: Add Flow control statistics display via ethtool")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The field res_free indicates the total number of counters which are
available for allocation (reserved and unreserved). Fixed a bug where
the reserved counters were subtracted from res_free before any
allocation was performed.

Before this fix, free counters which were not reserved could not be
allocated.

Fixes: 9de92c60 ("net/mlx4_core: Adjust counter grant policy in the resource tracker")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Set the minimal MTU threshold for running loopback selftest.
MTU should be big enough to include packet payload, NET_IP_ALIGN,
Ethernet headers and preamble length.

Fixes: e7c1c2c4 ("mlx4_en: Added self diagnostics test implementation")
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When in SGMII-to-Copper mode, the fiber page is used for the MAC facing
link, and does not require configuration of the fiber auto-negotiation
settings.  Avoid trying.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jose Abreu will join to maintain dwc-xlgmac.
He will help with new feature development for
this driver. Thanks Jose and welcome on board!
Signed-off-by: Jie Deng <jiedeng@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Only the retransmit timer currently refreshes tcp_mstamp

We should do the same for delayed acks and keepalives.

Even if RFC 7323 does not request it, this is consistent to what linux
did in the past, when TS values were based on jiffies.

Fixes: 385e2070 ("tcp: use tp->tcp_mstamp in output path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Mike Maloney <maloney@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Mike Maloney <maloney@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When ms timestamp is used, current logic uses 1us in
tcp_rcv_rtt_update() when the real rcv_rtt is within 1 - 999us.
This could cause rcv_rtt underestimation.
Fix it by always using a min value of 1ms if ms timestamp is used.

Fixes: 645f4c6f ("tcp: switch rcv_rtt_est and rcvq_space to high resolution timestamps")
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The code to handle multi-port SKGE boards was freeing IRQ
twice. The first one was under lock and might sleep.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function meson_gxl_read_status is local to the source and does
not need to be in global scope, so make it static.

Cleans up sparse warning:
symbol 'meson_gxl_read_status' was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ensure that all mdio devices populate the struct device fwnode pointer
as well as the of_node pointer to allow drivers that wish to use
fwnode APIs to work.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a PHY has the BMCR_PDOWN bit set, it may decide to ignore writes
to other registers, or reset the registers to power-on defaults.
Micrel PHYs do this for their interrupt registers.

The current structure of phylib tries to enable interrupts before
resuming (and releasing) the BMCR_PDOWN bit.  This fails, causing
Micrel PHYs to stop working after a suspend/resume sequence if they
are using interrupts.

Fix this by ensuring that the PHY driver resume methods do not take
the phydev->lock mutex themselves, but the callers of phy_resume()
take that lock.  This then allows us to move the call to phy_resume()
before we enable interrupts in phy_start().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use XAUI rather than XGMII for DSA link ports, as this is the interface
mode that the switches actually use. XAUI is the 4 lane bus with clock
per direction, whereas XGMII is a 32 bit bus with clock.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

XGMII is a 32-bit bus plus two clock signals per direction.  XAUI is
four serial lanes per direction.  The 88e6190 supports XAUI but not
XGMII as it doesn't have enough pins.  The same is true of 88e6176.

Match on PHY_INTERFACE_MODE_XAUI for the XAUI port type, but keep
accepting XGMII for backwards compatibility.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver may sleep under a spinlock.
The function call path is:
rr_close (acquire the spinlock)
  free_irq --> may sleep

To fix it, free_irq is moved to the place without holding the spinlock.

This bug is found by my static analysis tool(DSAC) and checked by my code review.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The follow patchset contains Netfilter fixes for your net tree,
they are:

1) Fix compilation warning in x_tables with clang due to useless
   redundant reassignment, from Colin Ian King.

2) Add bugtrap to net_exit to catch uninitialized lists, patch
   from Vasily Averin.

3) Fix out of bounds memory reads in H323 conntrack helper, this
   comes with an initial patch to remove replace the obscure
   CHECK_BOUND macro as a dependency. From Eric Sesterhenn.

4) Reduce retransmission timeout when window is 0 in TCP conntrack,
   from Florian Westphal.

6) ctnetlink clamp timeout to INT_MAX if timeout is too large,
   otherwise timeout wraps around and it results in killing the
   entry that is being added immediately.

7) Missing CAP_NET_ADMIN checks in cthelper and xt_osf, due to
   no netns support. From Kevin Cernekee.

8) Missing maximum number of instructions checks in xt_bpf, patch
   from Jann Horn.

9) With no CONFIG_PROC_FS ipt_CLUSTERIP compilation breaks,
   patch from Arnd Bergmann.

10) Missing netlink attribute policy in nftables exthdr, from
    Florian Westphal.

11) Enable conntrack with IPv6 MASQUERADE rules, as a357b3f8
    should have done in first place, from Konstantin Khlebnikov.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

If clk_set_rate() fails, we should disable clk before return.
Found by Linux Driver Verification project (linuxtesting.org).

Changes since v2 [1]:
* Merged with latest code changes

Changes since v1:
Update made thanks to David's review, much appreciated David.
* Improved inconsistent failure handling of clock rate setting
* For completeness of usecase, added arc_emac_probe error handling
Signed-off-by: Branislav Radocaj <branislav@radocaj.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sierra Wireless EM7565 is an Qualcomm MDM9x50 based M.2 modem.
The USB id is added to qmi_wwan.c to allow QMI communication
with the EM7565.
Signed-off-by: Sebastian Sjoholm <ssjoholm@mac.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Closing a multicast socket after the final IPv4 address is deleted
from an interface can generate a membership report that uses the
source IP from a different interface.  The following test script, run
from an isolated netns, reproduces the issue:

    #!/bin/bash

    ip link add dummy0 type dummy
    ip link add dummy1 type dummy
    ip link set dummy0 up
    ip link set dummy1 up
    ip addr add 10.1.1.1/24 dev dummy0
    ip addr add 192.168.99.99/24 dev dummy1

    tcpdump -U -i dummy0 &
    socat EXEC:"sleep 2" \
        UDP4-DATAGRAM:239.101.1.68:8889,ip-add-membership=239.0.1.68:10.1.1.1 &

    sleep 1
    ip addr del 10.1.1.1/24 dev dummy0
    sleep 5
    kill %tcpdump

RFC 3376 specifies that the report must be sent with a valid IP source
address from the destination subnet, or from address 0.0.0.0.  Add an
extra check to make sure this is the case.
Signed-off-by: Kevin Cernekee <cernekee@chromium.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the function tipc_sk_mcast_rcv() we call refcount_dec(&skb->users)
on received sk_buffers. Since the reference counter might hit zero at
this point, we have a potential memory leak.

We fix this by replacing refcount_dec() with kfree_skb().
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These duplicate includes have been found with scripts/checkincludes.pl but
they have been removed manually to avoid removing false positives.
Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv4 stack reacts to changes to small MTU, by disabling itself under
RTNL.

But there is a window where threads not using RTNL can see a wrong
device mtu. This can lead to surprises, in igmp code where it is
assumed the mtu is suitable.

Fix this by reading device mtu once and checking IPv4 minimal MTU.

This patch adds missing IPV4_MIN_MTU define, to not abuse
ETH_MIN_MTU anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzkaller reported crashes in IPv6 stack [1]

Xin Long found that lo MTU was set to silly values.

IPv6 stack reacts to changes to small MTU, by disabling itself under
RTNL.

But there is a window where threads not using RTNL can see a wrong
device mtu. This can lead to surprises, in mld code where it is assumed
the mtu is suitable.

Fix this by reading device mtu once and checking IPv6 minimal MTU.

[1]
 skbuff: skb_over_panic: text:0000000010b86b8d len:196 put:20
 head:000000003b477e60 data:000000000e85441e tail:0xd4 end:0xc0 dev:lo
 ------------[ cut here ]------------
 kernel BUG at net/core/skbuff.c:104!
 invalid opcode: 0000 [#1] SMP KASAN
 Dumping ftrace buffer:
    (ftrace buffer empty)
 Modules linked in:
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc2-mm1+ #39
 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
 Google 01/01/2011
 RIP: 0010:skb_panic+0x15c/0x1f0 net/core/skbuff.c:100
 RSP: 0018:ffff8801db307508 EFLAGS: 00010286
 RAX: 0000000000000082 RBX: ffff8801c517e840 RCX: 0000000000000000
 RDX: 0000000000000082 RSI: 1ffff1003b660e61 RDI: ffffed003b660e95
 RBP: ffff8801db307570 R08: 1ffff1003b660e23 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff85bd4020
 R13: ffffffff84754ed2 R14: 0000000000000014 R15: ffff8801c4e26540
 FS:  0000000000000000(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000463610 CR3: 00000001c6698000 CR4: 00000000001406e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <IRQ>
  skb_over_panic net/core/skbuff.c:109 [inline]
  skb_put+0x181/0x1c0 net/core/skbuff.c:1694
  add_grhead.isra.24+0x42/0x3b0 net/ipv6/mcast.c:1695
  add_grec+0xa55/0x1060 net/ipv6/mcast.c:1817
  mld_send_cr net/ipv6/mcast.c:1903 [inline]
  mld_ifc_timer_expire+0x4d2/0x770 net/ipv6/mcast.c:2448
  call_timer_fn+0x23b/0x840 kernel/time/timer.c:1320
  expire_timers kernel/time/timer.c:1357 [inline]
  __run_timers+0x7e1/0xb60 kernel/time/timer.c:1660
  run_timer_softirq+0x4c/0xb0 kernel/time/timer.c:1686
  __do_softirq+0x29d/0xbb2 kernel/softirq.c:285
  invoke_softirq kernel/softirq.c:365 [inline]
  irq_exit+0x1d3/0x210 kernel/softirq.c:405
  exiting_irq arch/x86/include/asm/apic.h:540 [inline]
  smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052
  apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:920
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Tested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>