Pull ARM updates from Russell King:
 "Not much this time around, the 5.20-rc1 development updates for arm
  are:

   - add KASAN support for vmalloc space on arm

   - some sparse fixes from Ben Dooks

   - rework amba device handling (so device addition isn't deferred)"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9220/1: amba: Remove deferred device addition
  ARM: 9219/1: fix undeclared soft_restart
  ARM: 9218/1: dma-mapping: fix pointer/integer warning
  ARM: 9217/1: add definition of arch_irq_work_raise()
  ARM: 9203/1: kconfig: fix MODULE_PLTS for KASAN with KASAN_VMALLOC
  ARM: 9202/1: kasan: support CONFIG_KASAN_VMALLOC

Pull csky updates from Guo Ren:

 - Add jump-label implementation

 - Add qspinlock support

 - Enable ARCH_INLINE_READ*/WRITE*/SPIN*

 - Some fixups and a coding convention

* tag 'csky-for-linus-6.0-rc1' of https://github.com/c-sky/csky-linux:
  csky: abiv1: Fixup compile error
  csky: cmpxchg: Coding convention for BUILD_BUG()
  csky: Enable ARCH_INLINE_READ*/WRITE*/SPIN*
  csky: Add qspinlock support
  csky: Add jump-label implementation
  csky: Move HEAD_TEXT_SECTION out of __init_begin-end
  csky: Correct position of _stext
  csky: Use the bitmap API to allocate bitmaps
  csky/kprobe: reclaim insn_slot on kprobe unregistration

Pull AVR32 updates from Hans-Christian Noren Egtvedt:
 "Mostly changes to documentation and comments"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  video:backlight: remove reference to AVR32 architecture in ltv350qv
  video: remove support for non-existing atmel,at32ap-lcdc in atmel_lcdfb
  usb:udc: remove reference to AVR32 architecture in Atmel USBA Kconfig
  sound:spi: remove reference to AVR32 in Atmel AT73C213 DAC driver
  net: remove cdns,at32ap7000-macb device tree entry
  misc: update maintainer email address and description for atmel-ssc
  mfd: remove reference to AVR32 architecture in atmel-smc.c
  dma:dw: remove reference to AVR32 architecture in core.c

Pull xen updates from Juergen Gross:

 - a series fine tuning virtio support for Xen guests, including removal
   the now again unused "platform_has()" feature.

 - a fix for host admin triggered reboot of Xen guests

 - a simple spelling fix

* tag 'for-linus-6.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: don't require virtio with grants for non-PV guests
  kernel: remove platform_has() infrastructure
  virtio: replace restricted mem access flag with callback
  xen: Fix spelling mistake
  xen/manage: Use orderly_reboot() to reboot

Pull kvm updates from Paolo Bonzini:
 "Quite a large pull request due to a selftest API overhaul and some
  patches that had come in too late for 5.19.

  ARM:

   - Unwinder implementations for both nVHE modes (classic and
     protected), complete with an overflow stack

   - Rework of the sysreg access from userspace, with a complete rewrite
     of the vgic-v3 view to allign with the rest of the infrastructure

   - Disagregation of the vcpu flags in separate sets to better track
     their use model.

   - A fix for the GICv2-on-v3 selftest

   - A small set of cosmetic fixes

  RISC-V:

   - Track ISA extensions used by Guest using bitmap

   - Added system instruction emulation framework

   - Added CSR emulation framework

   - Added gfp_custom flag in struct kvm_mmu_memory_cache

   - Added G-stage ioremap() and iounmap() functions

   - Added support for Svpbmt inside Guest

  s390:

   - add an interface to provide a hypervisor dump for secure guests

   - improve selftests to use TAP interface

   - enable interpretive execution of zPCI instructions (for PCI
     passthrough)

   - First part of deferred teardown

   - CPU Topology

   - PV attestation

   - Minor fixes

  x86:

   - Permit guests to ignore single-bit ECC errors

   - Intel IPI virtualization

   - Allow getting/setting pending triple fault with
     KVM_GET/SET_VCPU_EVENTS

   - PEBS virtualization

   - Simplify PMU emulation by just using PERF_TYPE_RAW events

   - More accurate event reinjection on SVM (avoid retrying
     instructions)

   - Allow getting/setting the state of the speaker port data bit

   - Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls
     are inconsistent

   - "Notify" VM exit (detect microarchitectural hangs) for Intel

   - Use try_cmpxchg64 instead of cmpxchg64

   - Ignore benign host accesses to PMU MSRs when PMU is disabled

   - Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior

   - Allow NX huge page mitigation to be disabled on a per-vm basis

   - Port eager page splitting to shadow MMU as well

   - Enable CMCI capability by default and handle injected UCNA errors

   - Expose pid of vcpu threads in debugfs

   - x2AVIC support for AMD

   - cleanup PIO emulation

   - Fixes for LLDT/LTR emulation

   - Don't require refcounted "struct page" to create huge SPTEs

   - Miscellaneous cleanups:
      - MCE MSR emulation
      - Use separate namespaces for guest PTEs and shadow PTEs bitmasks
      - PIO emulation
      - Reorganize rmap API, mostly around rmap destruction
      - Do not workaround very old KVM bugs for L0 that runs with nesting enabled
      - new selftests API for CPUID

  Generic:

   - Fix races in gfn->pfn cache refresh; do not pin pages tracked by
     the cache

   - new selftests API using struct kvm_vcpu instead of a (vm, id)
     tuple"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (606 commits)
  selftests: kvm: set rax before vmcall
  selftests: KVM: Add exponent check for boolean stats
  selftests: KVM: Provide descriptive assertions in kvm_binary_stats_test
  selftests: KVM: Check stat name before other fields
  KVM: x86/mmu: remove unused variable
  RISC-V: KVM: Add support for Svpbmt inside Guest/VM
  RISC-V: KVM: Use PAGE_KERNEL_IO in kvm_riscv_gstage_ioremap()
  RISC-V: KVM: Add G-stage ioremap() and iounmap() functions
  KVM: Add gfp_custom flag in struct kvm_mmu_memory_cache
  RISC-V: KVM: Add extensible CSR emulation framework
  RISC-V: KVM: Add extensible system instruction emulation framework
  RISC-V: KVM: Factor-out instruction emulation into separate sources
  RISC-V: KVM: move preempt_disable() call in kvm_arch_vcpu_ioctl_run
  RISC-V: KVM: Make kvm_riscv_guest_timer_init a void function
  RISC-V: KVM: Fix variable spelling mistake
  RISC-V: KVM: Improve ISA extension by using a bitmap
  KVM, x86/mmu: Fix the comment around kvm_tdp_mmu_zap_leafs()
  KVM: SVM: Dump Virtual Machine Save Area (VMSA) to klog
  KVM: x86/mmu: Treat NX as a valid SPTE bit for NPT
  KVM: x86: Do not block APIC write for non ICR registers
  ...

The builds for alpha and mips allmodconfig fails with the error:

  drivers/gpu/drm/amd/amdgpu/psp_v13_0.c:534:23: error: implicit declaration of function 'vmalloc'; did you mean 'kvmalloc'? [-Werror=implicit-function-declaration]
  drivers/gpu/drm/amd/amdgpu/psp_v13_0.c:534:21: error: assignment to 'void *' from 'int' makes pointer from integer without a cast [-Werror=int-conversion]
  drivers/gpu/drm/amd/amdgpu/psp_v13_0.c:545:33: error: implicit declaration of function 'vfree'; did you mean 'kvfree'? [-Werror=implicit-function-declaration]

Add the header file for vmalloc and vfree.
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull SPDX updates from Greg KH:
 "Here is the set of SPDX comment updates for 6.0-rc1.

  Nothing huge here, just a number of updated SPDX license tags and
  cleanups based on the review of a number of common patterns in GPLv2
  boilerplate text.

  Also included in here are a few other minor updates, two USB files,
  and one Documentation file update to get the SPDX lines correct.

  All of these have been in the linux-next tree for a very long time"

* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
  Documentation: samsung-s3c24xx: Add blank line after SPDX directive
  x86/crypto: Remove stray comment terminator
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
  ...

Pull staging driver updates from Greg KH:
 "Here is the big set of staging driver patches for 6.0-rc1.

  Another round where we removed more lines of code than added, always a
  nice progression. Some of that came from the movement of the vme code
  back into staging, and removal of some other of the vme driver code as
  there are no known users and it is very obsolete and unmaintained. It
  can be added back easily if someone offers to maintain it.

  Other than that this merge has lots of little things:

   - huge cleanups for r8188eu driver

   - minor cleanups for other wifi drivers

   - tiny loop fixes for greybus code

   - other small coding style fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (191 commits)
  staging: r8188eu: fix potential uninitialised variable use in rtw_pwrctrl.c
  staging: r8188eu: remove initializer from ret in rtw_pwr_wakeup
  staging: vt6655: Convert macro vt6655_mac_clear_stck_ds to function
  staging: vt6655: Rename MACvClearStckDS
  staging: fbtft: core: set smem_len before fb_deferred_io_init call
  staging: r8188eu: convert rtw_pwr_wakeup to correct error code semantics
  staging: r8188eu: make dump_chip_info() static
  staging: r8188eu: remove DoReserved prototype
  staging: r8188eu: remove OnAtim prototype
  staging: r8188eu: remove SetHwReg8188EU()
  staging: r8188eu: make update_TSF() and correct_TSF() static
  staging: r8188eu: remove unused parameter from update_TSF()
  staging: r8188eu: remove unused parameter from correct_TSF()
  staging: r8188eu: remove HW_VAR_SET_OPMODE from SetHwReg8188EU()
  staging: pi433: remove duplicated comments
  staging: qlge: refine variable name
  staging: vt6655: Convert macro vt6655_mac_word_reg_bits_off to function
  staging: vt6655: Convert macro vt6655_mac_reg_bits_off to function
  staging: vt6655: Convert macro vt6655_mac_word_reg_bits_on to function
  staging: vt6655: Convert macro vt6655_mac_reg_bits_on to function
  ...

Clang warns:

  drivers/usb/cdns3/cdns3-gadget.c:2290:11: error: variable 'priv_dev' is uninitialized when used here [-Werror,-Wuninitialized]
                  dev_dbg(priv_dev->dev, "usbss: invalid parameters\n");
                          ^~~~~~~~
  include/linux/dev_printk.h:155:18: note: expanded from macro 'dev_dbg'
          dynamic_dev_dbg(dev, dev_fmt(fmt), ##__VA_ARGS__)
                          ^~~
  include/linux/dynamic_debug.h:167:7: note: expanded from macro 'dynamic_dev_dbg'
                          dev, fmt, ##__VA_ARGS__)
                          ^~~
  include/linux/dynamic_debug.h:152:56: note: expanded from macro '_dynamic_func_call'
          __dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
                                                              ^~~~~~~~~~~
  include/linux/dynamic_debug.h:134:15: note: expanded from macro '__dynamic_func_call'
                  func(&id, ##__VA_ARGS__);               \
                              ^~~~~~~~~~~
  drivers/usb/cdns3/cdns3-gadget.c:2278:31: note: initialize the variable 'priv_dev' to silence this warning
          struct cdns3_device *priv_dev;
                                      ^
                                      = NULL
  1 error generated.

The priv_dev assignment was moved below the if statement to avoid
potentially dereferencing ep before it was checked but priv_dev is used
in the dev_dbg() call.

To fix this, move the priv_dev and comp_desc assignments back to their
original spot and hoist the ep check above those assignments with a call
to pr_debug() instead of dev_dbg().

Fixes: c3ffc9c4 ("usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()")
Link: https://github.com/ClangBuiltLinux/linux/issues/1680Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of Thunderbolt and USB changes for 6.0-rc1.

  Lots of little things here, nothing major, just constant development
  on some new hardware support and cleanups of older drivers. Highlights
  are:

   - lots of typec changes and improvements for new hardware

   - new gadget controller driver

   - thunderbolt support for new hardware

   - the normal set of new usb-serial device ids and cleanups

   - loads of dwc3 controller fixes and improvements

   - mtu3 driver updates

   - testusb fixes for longtime issues (not many people use this tool it
     seems.)

   - minor driver fixes and improvements over the USB tree

   - chromeos platform driver changes were added and then reverted as
     they depened on some typec changes, but the cross-tree merges
     caused problems so they will come back later through the platform
     tree.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits)
  usb: misc: onboard_usb_hub: Remove duplicated power_on delay
  usb: misc: onboard_usb_hub: Add TI USB8041 hub support
  usb: misc: onboard_usb_hub: Add reset-gpio support
  USB: usbsevseg: convert sysfs snprintf to sysfs_emit
  dt-bindings: usb: Add binding for TI USB8041 hub controller
  ARM: multi_v7_defconfig: enable USB onboard HUB driver
  ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx
  usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub
  dt-bindings: usb: generic-ehci: allow usb-hcd schema properties
  usb: typec: ucsi: stm32g0: add bootloader support
  usb: typec: ucsi: stm32g0: add support for stm32g0 controller
  dt-bindings: usb: typec: add bindings for stm32g0 controller
  usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion
  usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
  usb/chipidea: fix repeated words in comments
  usb: renesas-xhci: Do not print any log while fw verif success
  usb: typec: retimer: Add missing id check in match callback
  USB: xhci: Fix comment typo
  usb/typec/tcpm: fix repeated words in comments
  usb/musb: fix repeated words in comments
  ...

Pull driver core / kernfs updates from Greg KH:
 "Here is the set of driver core and kernfs changes for 6.0-rc1.

  The "biggest" thing in here is some scalability improvements for
  kernfs for large systems. Other than that, included in here are:

   - arch topology and cache info changes that have been reviewed and
     discussed a lot.

   - potential error path cleanup fixes

   - deferred driver probe cleanups

   - firmware loader cleanups and tweaks

   - documentation updates

   - other small things

  All of these have been in the linux-next tree for a while with no
  reported problems"

* tag 'driver-core-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (63 commits)
  docs: embargoed-hardware-issues: fix invalid AMD contact email
  firmware_loader: Replace kmap() with kmap_local_page()
  sysfs docs: ABI: Fix typo in comment
  kobject: fix Kconfig.debug "its" grammar
  kernfs: Fix typo 'the the' in comment
  docs: driver-api: firmware: add driver firmware guidelines. (v3)
  arch_topology: Fix cache attributes detection in the CPU hotplug path
  ACPI: PPTT: Leave the table mapped for the runtime usage
  cacheinfo: Use atomic allocation for percpu cache attributes
  drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist
  MAINTAINERS: Change mentions of mpm to olivia
  docs: ABI: sysfs-devices-soc: Update Lee Jones' email address
  docs: ABI: sysfs-class-pwm: Update Lee Jones' email address
  Documentation/process: Add embargoed HW contact for LLVM
  Revert "kernfs: Change kernfs_notify_list to llist."
  ACPI: Remove the unused find_acpi_cpu_cache_topology()
  arch_topology: Warn that topology for nested clusters is not supported
  arch_topology: Add support for parsing sockets in /cpu-map
  arch_topology: Set cluster identifier in each core/thread from /cpu-map
  arch_topology: Limit span of cpu_clustergroup_mask()
  ...

Pull char / misc driver updates from Greg KH:
 "Here is the large set of char and misc and other driver subsystem
  changes for 6.0-rc1.

  Highlights include:

   - large set of IIO driver updates, additions, and cleanups

   - new habanalabs device support added (loads of register maps much
     like GPUs have)

   - soundwire driver updates

   - phy driver updates

   - slimbus driver updates

   - tiny virt driver fixes and updates

   - misc driver fixes and updates

   - interconnect driver updates

   - hwtracing driver updates

   - fpga driver updates

   - extcon driver updates

   - firmware driver updates

   - counter driver update

   - mhi driver fixes and updates

   - binder driver fixes and updates

   - speakup driver fixes

  All of these have been in linux-next for a while without any reported
  problems"

* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
  drivers: lkdtm: fix clang -Wformat warning
  char: remove VR41XX related char driver
  misc: Mark MICROCODE_MINOR unused
  spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
  dt-bindings: iio: adc: Add compatible for MT8188
  iio: light: isl29028: Fix the warning in isl29028_remove()
  iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
  iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
  iio: adc: max1027: unlock on error path in max1027_read_single_value()
  iio: proximity: sx9324: add empty line in front of bullet list
  iio: magnetometer: hmc5843: Remove duplicate 'the'
  iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
  iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
  ...

When this file was split in commit 5d945cbc ("drm/amd/display:
Create a file dedicated to planes") this chunk seemed to get dropped.

Linus noticed on this rx580 and I've reproduced on FIJI which makes
sense as these are pre-modifier GPUs.

With this applied, I get gdm back.

Fixes: 5d945cbc ("drm/amd/display: Create a file dedicated to planes")
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull drm updates from Dave Airlie:
 "Highlights:

   - New driver for logicvc - which is a display IP core.

   - EDID parser rework to add new extensions

   - fbcon scrolling improvements

   - i915 has some more DG2 work but not enabled by default, but should
     have enough features for userspace to work now.

  Otherwise it's lots of work all over the place. Detailed summary:

  New driver:
   - logicvc

  vfio:
   - use aperture API

  core:
   - of: Add data-lane helpers and convert drivers
   - connector: Remove deprecated ida_simple_get()

  media:
   - Add various RGB666 and RGB888 format constants

  panel:
   - Add HannStar HSD101PWW
   - Add ETML0700Y5DHA

  dma-buf:
   - add sync-file API
   - set dma mask for udmabuf devices

  fbcon:
   - Improve scrolling performance
   - Sanitize input

  fbdev:
   - device unregistering fixes
   - vesa: Support COMPILE_TEST
   - Disable firmware-device registration when first native driver loads

  aperture:
   - fix segfault during hot-unplug
   - export for use with other subsystems

  client:
   - use driver validated modes

  dp:
   - aux: make probing more reliable
   - mst: Read extended DPCD capabilities during system resume
   - Support waiting for HDP signal
   - Port-validation fixes

  edid:
   - CEA data-block iterators
   - struct drm_edid introduction
   - implement HF-EEODB extension

  gem:
   - don't use fb format non-existing planes

  probe-helper:
   - use 640x480 as displayport fallback

  scheduler:
   - don't kill jobs in interrupt context

  bridge:
   - Add support for i.MX8qxp and i.MX8qm
   - lots of fixes/cleanups
   - Add TI-DLPC3433
   - fy07024di26a30d: Optional GPIO reset
   - ldb: Add reg and reg-name properties to bindings, Kconfig fixes
   - lt9611: Fix display sensing;
   - tc358767: DSI/DPI refactoring and DSI-to-eDP support, DSI lane handling
   - tc358775: Fix clock settings
   - ti-sn65dsi83: Allow GPIO to sleep
   - adv7511: I2C fixes
   - anx7625: Fix error handling; DPI fixes; Implement HDP timeout via callback
   - fsl-ldb: Drop DE flip
   - ti-sn65dsi86: Convert to atomic modesetting

  amdgpu:
   - use atomic fence helpers in DM
   - fix VRAM address calculations
   - export CRTC bpc via debugfs
   - Initial devcoredump support
   - Enable high priority gfx queue on asics which support it
   - Adjust GART size on newer APUs for S/G display
   - Soft reset for GFX 11 / SDMA 6
   - Add gfxoff status query for vangogh
   - Fix timestamps for cursor only commits
   - Adjust GART size on newer APUs for S/G display
   - fix buddy memory corruption

  amdkfd:
   - MMU notifier fixes
   - P2P DMA support using dma-buf
   - Add available memory IOCTL
   - HMM profiler support
   - Simplify GPUVM validation
   - Unified memory for CWSR save/restore area

  i915:
   - General driver clean-up
   - DG2 enabling (still under force probe)
       - DG2 small BAR memory support
       - HuC loading support
       - DG2 workarounds
       - DG2/ATS-M device IDs added
   - Ponte Vecchio prep work and new blitter engines
   - add Meteorlake support
   - Fix sparse warnings
   - DMC MMIO range checks
   - Audio related fixes
   - Runtime PM fixes
   - PSR fixes
   - Media freq factor and per-gt enhancements
   - DSI fixes for ICL+
   - Disable DMC flip queue handlers
   - ADL_P voltage swing updates
   - Use more the VBT for panel information
   - Fix on Type-C ports with TBT mode
   - Improve fastset and allow seamless M/N changes
   - Accept more fixed modes with VRR/DMRRS panels
   - Disable connector polling for a headless SKU
   - ADL-S display PLL w/a
   - Enable THP on Icelake and beyond
   - Fix i915_gem_object_ggtt_pin_ww regression on old platforms
   - Expose per tile media freq factor in sysfs
   - Fix dma_resv fence handling in multi-batch execbuf
   - Improve on suspend / resume time with VT-d enabled
   - export CRTC bpc settings via debugfs

  msm:
   - gpu: a619 support
   - gpu: Fix for unclocked GMU register access
   - gpu: Devcore dump enhancements
   - client utilization via fdinfo support
   - fix fence rollover issue
   - gem: Lockdep false-positive warning fix
   - gem: Switch to pfn mappings
   - WB support on sc7180
   - dp: dropped custom bulk clock implementation
   - fix link retraining on resolution change
   - hdmi: dropped obsolete GPIO support

  tegra:
   - context isolation for host1x engines
   - tegra234 soc support

  mediatek:
   - add vdosys0/1 for mt8195
   - add MT8195 dp_intf driver

  exynos:
   - Fix resume function issue of exynos decon driver by calling
     clk_disable_unprepare() properly if clk_prepare_enable() failed.

  nouveau:
   - set of misc fixes/cleanups
   - display cleanups

  gma500:
   - Cleanup connector I2C handling

  hyperv:
   - Unify VRAM allocation of Gen1 and Gen2

  meson:
   - Support YUV422 output; Refcount fixes

  mgag200:
   - Support damage clipping
   - Support gamma handling
   - Protect concurrent HW access
   - Fixes to connector
   - Store model-specific limits in device-info structure
   - fix PCI register init

  panfrost:
   - Valhall support

  r128:
   - Fix bit-shift overflow

  rockchip:
   - Locking fixes in error path

  ssd130x:
   - Fix built-in linkage

  udl:
   - Always advertize VGA connector

  ast:
   - Support multiple outputs
   - fix black screen on resume

  sun4i:
   - HDMI PHY cleanups

  vc4:
   - Add support for BCM2711

  vkms:
   - Allocate output buffer with vmalloc()

  mcde:
   - Fix ref-count leak

  mxsfb/lcdif:
   - Support i.MX8MP LCD controller

  stm/ltdc:
   - Support dynamic Z order
   - Support mirroring

  ingenic:
   - Fix display at maximum resolution"

* tag 'drm-next-2022-08-03' of git://anongit.freedesktop.org/drm/drm: (1480 commits)
  drm/amd/display: Fix a compilation failure on PowerPC caused by FPU code
  drm/amdgpu: enable support for psp 13.0.4 block
  drm/amdgpu: add files for PSP 13.0.4
  drm/amdgpu: add header files for MP 13.0.4
  drm/amdgpu: correct RLC_RLCS_BOOTLOAD_STATUS offset and index
  drm/amdgpu: send msg to IMU for the front-door loading
  drm/amdkfd: use time_is_before_jiffies(a + b) to replace "jiffies - a > b"
  drm/amdgpu: fix hive reference leak when reflecting psp topology info
  drm/amd/pm: enable GFX ULV feature support for SMU13.0.0
  drm/amd/pm: update driver if header for SMU 13.0.0
  drm/amdgpu: move mes self test after drm sched re-started
  drm/amdgpu: drop non-necessary call trace dump
  drm/amdgpu: enable VCN cg and JPEG cg/pg
  drm/amdgpu: vcn_4_0_2 video codec query
  drm/amdgpu: add VCN_4_0_2 firmware support
  drm/amdgpu: add VCN function in NBIO v7.7
  drm/amdgpu: fix a vcn4 boot poll bug in emulation mode
  drm/amd/amdgpu: add memory training support for PSP_V13
  drm/amdkfd: remove an unnecessary amdgpu_bo_ref
  drm/amd/pm: Add get_gfx_off_status interface for yellow carp
  ...

Pull media updates from Mauro Carvalho Chehab:

 - New driver for Semi AR0521 sensor

 - rkisp1 CSI code was split into a separate file

 - sun6i has gained support for the A31 MIPI CSI-2 controller

 - sun8i has gained support for the A83T MIPI CSI-2 controller

 - vimc driver got support for virtual lens

 - HEVC uAPI has gained its final form and got added to public headers

 - hantro and cedrus got updates on H-265 support

 - stkwebcam was promoted from staging

 - atomisp staging driver got cleanups on its hmm and kmap related logic

 - ov5640 gained support for more modes and got some rework

 - imx7-media-csi staging driver got several improvements related to mc
   API support

 - uvcvideo now handles better power line control

 - mediatec vcodec gained support for new hardware and got some codec
   updates

 - Lots of other bug fixes, improvements and cleanups.

* tag 'media/v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (446 commits)
  media: hantro: Remove dedicated control documentation
  hantro: Remove incorrect HEVC SPS validation
  media: cedrus: hevc: Add check for invalid timestamp
  media: sunxi: sun6i_mipi_csi2.c/sun8i_a83t_mipi_csi2.c: clarify error handling
  media: uvcvideo: Fix invalid pointer in uvc_ctrl_init_ctrl()
  media: Documentation: mc-core: Fix typo
  media: videodev2.h.rst.exceptions: add missing exceptions
  media: vimc: wrong pointer is used with PTR_ERR
  media: rkisp1: debug: Add dump file in debugfs for MI main path registers
  media: rkisp1: Make the internal CSI-2 receiver optional
  media: rkisp1: Add infrastructure to support ISP features
  media: rkisp1: Support the ISP parallel input
  media: dt-bindings: media: rkisp1: Add port for parallel interface
  media: rkisp1: Use fwnode_graph_for_each_endpoint
  media: rkisp1: csi: Plumb the CSI RX subdev
  media: rkisp1: csi: Implement a V4L2 subdev for the CSI receiver
  media: rkisp1: isp: Disallow multiple active sources
  media: rkisp1: isp: Rename rkisp1_get_remote_source()
  media: rkisp1: isp: Constify various local variables
  media: rkisp1: isp: Fix whitespace issues
  ...

Pull i2c updates from Wolfram Sang:

 - new drivers: Microchip CoreI2C, Renesas RZV2M

 - quite some DT schema conversions and extensions

 - and a bunch of driver updates and improvements

* tag 'i2c-for-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits)
  i2c: extend documentation about retvals of master_xfer functions
  i2c: mux-gpmux: Add of_node_put() when breaking out of loop
  dt-bindings: i2c: i2c-rk3x: Document Rockchip RV1126
  i2c: qcom-geni: Use the correct return value
  i2c: cadence: Support PEC for SMBus block read
  i2c: qcom-geni: Propagate GENI_ABORT_DONE to geni_i2c_abort_xfer()
  i2c: brcmstb: Use dev_name() for adapter name
  i2c: Add Renesas RZ/V2M controller
  dt-bindings: i2c: Document RZ/V2M I2C controller
  i2c: mlxcpld: Add callback to notify probing completion
  i2c: scmi: Replace open coded device_get_match_data()
  i2c: stm32: add support for the STM32MP13 soc
  dt-bindings: i2c: st,stm32-i2c: add entry for stm32mp13
  dt-bindings: i2c: i2c-rk3x: add rk3588 compatible
  i2c: add support for microchip fpga i2c controllers
  i2c: i801: Add support for Intel Meteor Lake-P
  dt-bindings: i2c: nomadik: Add power domain to binding
  dt-bindings: i2c: nomadik: Drop unused voltage supply from example
  i2c: Fix a potential use after free
  i2c: hisi: use HZ_PER_KHZ macro in units.h
  ...

Pull networking changes from Paolo Abeni:
 "Core:

   - Refactor the forward memory allocation to better cope with memory
     pressure with many open sockets, moving from a per socket cache to
     a per-CPU one

   - Replace rwlocks with RCU for better fairness in ping, raw sockets
     and IP multicast router.

   - Network-side support for IO uring zero-copy send.

   - A few skb drop reason improvements, including codegen the source
     file with string mapping instead of using macro magic.

   - Rename reference tracking helpers to a more consistent netdev_*
     schema.

   - Adapt u64_stats_t type to address load/store tearing issues.

   - Refine debug helper usage to reduce the log noise caused by bots.

  BPF:

   - Improve socket map performance, avoiding skb cloning on read
     operation.

   - Add support for 64 bits enum, to match types exposed by kernel.

   - Introduce support for sleepable uprobes program.

   - Introduce support for enum textual representation in libbpf.

   - New helpers to implement synproxy with eBPF/XDP.

   - Improve loop performances, inlining indirect calls when possible.

   - Removed all the deprecated libbpf APIs.

   - Implement new eBPF-based LSM flavor.

   - Add type match support, which allow accurate queries to the eBPF
     used types.

   - A few TCP congetsion control framework usability improvements.

   - Add new infrastructure to manipulate CT entries via eBPF programs.

   - Allow for livepatch (KLP) and BPF trampolines to attach to the same
     kernel function.

  Protocols:

   - Introduce per network namespace lookup tables for unix sockets,
     increasing scalability and reducing contention.

   - Preparation work for Wi-Fi 7 Multi-Link Operation (MLO) support.

   - Add support to forciby close TIME_WAIT TCP sockets via user-space
     tools.

   - Significant performance improvement for the TLS 1.3 receive path,
     both for zero-copy and not-zero-copy.

   - Support for changing the initial MTPCP subflow priority/backup
     status

   - Introduce virtually contingus buffers for sockets over RDMA, to
     cope better with memory pressure.

   - Extend CAN ethtool support with timestamping capabilities

   - Refactor CAN build infrastructure to allow building only the needed
     features.

  Driver API:

   - Remove devlink mutex to allow parallel commands on multiple links.

   - Add support for pause stats in distributed switch.

   - Implement devlink helpers to query and flash line cards.

   - New helper for phy mode to register conversion.

  New hardware / drivers:

   - Ethernet DSA driver for the rockchip mt7531 on BPI-R2 Pro.

   - Ethernet DSA driver for the Renesas RZ/N1 A5PSW switch.

   - Ethernet DSA driver for the Microchip LAN937x switch.

   - Ethernet PHY driver for the Aquantia AQR113C EPHY.

   - CAN driver for the OBD-II ELM327 interface.

   - CAN driver for RZ/N1 SJA1000 CAN controller.

   - Bluetooth: Infineon CYW55572 Wi-Fi plus Bluetooth combo device.

  Drivers:

   - Intel Ethernet NICs:
      - i40e: add support for vlan pruning
      - i40e: add support for XDP framented packets
      - ice: improved vlan offload support
      - ice: add support for PPPoE offload

   - Mellanox Ethernet (mlx5)
      - refactor packet steering offload for performance and scalability
      - extend support for TC offload
      - refactor devlink code to clean-up the locking schema
      - support stacked vlans for bridge offloads
      - use TLS objects pool to improve connection rate

   - Netronome Ethernet NICs (nfp):
      - extend support for IPv6 fields mangling offload
      - add support for vepa mode in HW bridge
      - better support for virtio data path acceleration (VDPA)
      - enable TSO by default

   - Microsoft vNIC driver (mana)
      - add support for XDP redirect

   - Others Ethernet drivers:
      - bonding: add per-port priority support
      - microchip lan743x: extend phy support
      - Fungible funeth: support UDP segmentation offload and XDP xmit
      - Solarflare EF100: add support for virtual function representors
      - MediaTek SoC: add XDP support

   - Mellanox Ethernet/IB switch (mlxsw):
      - dropped support for unreleased H/W (XM router).
      - improved stats accuracy
      - unified bridge model coversion improving scalability (parts 1-6)
      - support for PTP in Spectrum-2 asics

   - Broadcom PHYs
      - add PTP support for BCM54210E
      - add support for the BCM53128 internal PHY

   - Marvell Ethernet switches (prestera):
      - implement support for multicast forwarding offload

   - Embedded Ethernet switches:
      - refactor OcteonTx MAC filter for better scalability
      - improve TC H/W offload for the Felix driver
      - refactor the Microchip ksz8 and ksz9477 drivers to share the
        probe code (parts 1, 2), add support for phylink mac
        configuration

   - Other WiFi:
      - Microchip wilc1000: diable WEP support and enable WPA3
      - Atheros ath10k: encapsulation offload support

  Old code removal:

   - Neterion vxge ethernet driver: this is untouched since more than 10 years"

* tag 'net-next-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1890 commits)
  doc: sfp-phylink: Fix a broken reference
  wireguard: selftests: support UML
  wireguard: allowedips: don't corrupt stack when detecting overflow
  wireguard: selftests: update config fragments
  wireguard: ratelimiter: use hrtimer in selftest
  net/mlx5e: xsk: Discard unaligned XSK frames on striding RQ
  net: usb: ax88179_178a: Bind only to vendor-specific interface
  selftests: net: fix IOAM test skip return code
  net: usb: make USB_RTL8153_ECM non user configurable
  net: marvell: prestera: remove reduntant code
  octeontx2-pf: Reduce minimum mtu size to 60
  net: devlink: Fix missing mutex_unlock() call
  net/tls: Remove redundant workqueue flush before destroy
  net: txgbe: Fix an error handling path in txgbe_probe()
  net: dsa: Fix spelling mistakes and cleanup code
  Documentation: devlink: add add devlink-selftests to the table of contents
  dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
  net: ionic: fix error check for vlan flags in ionic_set_nic_features()
  net: ice: fix error NETIF_F_HW_VLAN_CTAG_FILTER check in ice_vsi_sync_fltr()
  nfp: flower: add support for tunnel offload without key ID
  ...

Pull ATA updates from Damien Le Moal:

 - Some code refactoring for the pata_hpt37x and pata_hpt3x2n drivers,
   from Sergei.

 - Several patches to cleanup in libata-core, libata-scsi and libata-eh
   code: fixes arguments and variables types, change some functions
   declaration to static and fix for a typo in a comment. From Sergey
   and Xiang.

 - Fix a compilation warning in the pata_macio driver, from me.

 - A fix for the expected number of resources in the sata_mv driver fix,
   from Andrew.

* tag 'ata-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: sata_mv: Fixes expected number of resources now IRQs are gone
  ata: libata-scsi: fix result type of ata_ioc32()
  ata: pata_macio: Fix compilation warning
  ata: libata-eh: fix sloppy result type of ata_internal_cmd_timeout()
  ata: libata-core: fix sloppy parameter type in ata_exec_internal[_sg]()
  ata: make ata_port::fastdrain_cnt *unsigned int*
  ata: libata-eh: fix sloppy result type of ata_eh_nr_in_flight()
  ata: libata-core: make ata_exec_internal_sg() *static*
  ata: make transfer mode masks *unsigned int*
  ata: libata-core: get rid of *else* branches in ata_id_n_sectors()
  ata: libata-core: fix sloppy typing in ata_id_n_sectors()
  ata: pata_hpt3x2n: pass base DPLL frequency to hpt3x2n_pci_clock()
  ata: pata_hpt37x: merge hpt374_read_freq() to hpt37x_pci_clock()
  ata: pata_hpt37x: factor out hpt37x_pci_clock()
  ata: pata_hpt37x: move claculating PCI clock from hpt37x_clock_slot()
  ata: libata: Fix syntax errors in comments

Pull zonefs update from Damien Le Moal:
 "A single change for this cycle to simplify handling of the memory page
  used as super block buffer during mount (from Fabio)"

* tag 'zonefs-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Call page_address() on page acquired with GFP_KERNEL flag

Pull iomap updates from Darrick Wong:
 "The most notable change in this first batch is that we no longer
  schedule pages beyond i_size for writeback, preferring instead to let
  truncate deal with those pages.

  Next week, there may be a second pull request to remove
  iomap_writepage from the other two filesystems (gfs2/zonefs) that use
  iomap for buffered IO. This follows in the same vein as the recent
  removal of writepage from XFS, since it hasn't been triggered in a few
  years; it does nothing during direct reclaim; and as far as the people
  who examined the patchset can tell, it's moving the codebase in the
  right direction.

  However, as it was a late addition to for-next, I'm holding off on
  that section for another week of testing to see if anyone can come up
  with a solid reason for holding off in the meantime.

  Summary:

   - Skip writeback for pages that are completely beyond EOF

   - Minor code cleanups"

* tag 'iomap-5.20-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  dax: set did_zero to true when zeroing successfully
  iomap: set did_zero to true when zeroing successfully
  iomap: skip pages past eof in iomap_do_writepage()

Pull affs fix from David Sterba:
 "One update to AFFS, switching away from the kmap/kmap_atomic API"

* tag 'affs-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  affs: use memcpy_to_page and remove replace kmap_atomic()

Pull btrfs updates from David Sterba:
 "This brings some long awaited changes, the send protocol bump,
  otherwise lots of small improvements and fixes. The main core part is
  reworking bio handling, cleaning up the submission and endio and
  improving error handling.

  There are some changes outside of btrfs adding helpers or updating
  API, listed at the end of the changelog.

  Features:

   - sysfs:
      - export chunk size, in debug mode add tunable for setting its size
      - show zoned among features (was only in debug mode)
      - show commit stats (number, last/max/total duration)

   - send protocol updated to 2
      - new commands:
         - ability write larger data chunks than 64K
         - send raw compressed extents (uses the encoded data ioctls),
           ie. no decompression on send side, no compression needed on
           receive side if supported
         - send 'otime' (inode creation time) among other timestamps
         - send file attributes (a.k.a file flags and xflags)
      - this is first version bump, backward compatibility on send and
        receive side is provided
      - there are still some known and wanted commands that will be
        implemented in the near future, another version bump will be
        needed, however we want to minimize that to avoid causing
        usability issues

   - print checksum type and implementation at mount time

   - don't print some messages at mount (mentioned as people asked about
     it), we want to print messages namely for new features so let's
     make some space for that
      - big metadata - this has been supported for a long time and is
        not a feature that's worth mentioning
      - skinny metadata - same reason, set by default by mkfs

  Performance improvements:

   - reduced amount of reserved metadata for delayed items
      - when inserted items can be batched into one leaf
      - when deleting batched directory index items
      - when deleting delayed items used for deletion
      - overall improved count of files/sec, decreased subvolume lock
        contention

   - metadata item access bounds checker micro-optimized, with a few
     percent of improved runtime for metadata-heavy operations

   - increase direct io limit for read to 256 sectors, improved
     throughput by 3x on sample workload

  Notable fixes:

   - raid56
      - reduce parity writes, skip sectors of stripe when there are no
        data updates
      - restore reading from on-disk data instead of using stripe cache,
        this reduces chances to damage correct data due to RMW cycle

   - refuse to replay log with unknown incompat read-only feature bit
     set

   - zoned
      - fix page locking when COW fails in the middle of allocation
      - improved tracking of active zones, ZNS drives may limit the
        number and there are ENOSPC errors due to that limit and not
        actual lack of space
      - adjust maximum extent size for zone append so it does not cause
        late ENOSPC due to underreservation

   - mirror reading error messages show the mirror number

   - don't fallback to buffered IO for NOWAIT direct IO writes, we don't
     have the NOWAIT semantics for buffered io yet

   - send, fix sending link commands for existing file paths when there
     are deleted and created hardlinks for same files

   - repair all mirrors for profiles with more than 1 copy (raid1c34)

   - fix repair of compressed extents, unify where error detection and
     repair happen

  Core changes:

   - bio completion cleanups
      - don't double defer compression bios
      - simplify endio workqueues
      - add more data to btrfs_bio to avoid allocation for read requests
      - rework bio error handling so it's same what block layer does,
        the submission works and errors are consumed in endio
      - when asynchronous bio offload fails fall back to synchronous
        checksum calculation to avoid errors under writeback or memory
        pressure

   - new trace points
      - raid56 events
      - ordered extent operations

   - super block log_root_transid deprecated (never used)

   - mixed_backref and big_metadata sysfs feature files removed, they've
     been default for sufficiently long time, there are no known users
     and mixed_backref could be confused with mixed_groups

  Non-btrfs changes, API updates:

   - minor highmem API update to cover const arguments

   - switch all kmap/kmap_atomic to kmap_local

   - remove redundant flush_dcache_page()

   - address_space_operations::writepage callback removed

   - add bdev_max_segments() helper"

* tag 'for-5.20-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (163 commits)
  btrfs: don't call btrfs_page_set_checked in finish_compressed_bio_read
  btrfs: fix repair of compressed extents
  btrfs: remove the start argument to check_data_csum and export
  btrfs: pass a btrfs_bio to btrfs_repair_one_sector
  btrfs: simplify the pending I/O counting in struct compressed_bio
  btrfs: repair all known bad mirrors
  btrfs: merge btrfs_dev_stat_print_on_error with its only caller
  btrfs: join running log transaction when logging new name
  btrfs: simplify error handling in btrfs_lookup_dentry
  btrfs: send: always use the rbtree based inode ref management infrastructure
  btrfs: send: fix sending link commands for existing file paths
  btrfs: send: introduce recorded_ref_alloc and recorded_ref_free
  btrfs: zoned: wait until zone is finished when allocation didn't progress
  btrfs: zoned: write out partially allocated region
  btrfs: zoned: activate necessary block group
  btrfs: zoned: activate metadata block group on flush_space
  btrfs: zoned: disable metadata overcommit for zoned
  btrfs: zoned: introduce space_info->active_total_bytes
  btrfs: zoned: finish least available block group on data bg allocation
  btrfs: let can_allocate_chunk return error
  ...

Pull efivars sysfs interface removal from Ard Biesheuvel:
 "Remove the obsolete 'efivars' sysfs based interface to the EFI
  variable store, now that all users have moved to the efivarfs pseudo
  file system, which was created ~10 years ago to address some
  fundamental shortcomings in the sysfs based driver.

  Move the 'business logic' related to which EFI variables are important
  and may affect the boot flow from the efivars support layer into the
  efivarfs pseudo file system, so it is no longer exposed to other parts
  of the kernel"

* tag 'efi-efivars-removal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
  efi: vars: Move efivar caching layer into efivarfs
  efi: vars: Switch to new wrapper layer
  efi: vars: Remove deprecated 'efivars' sysfs interface

Pull EFI updates from Ard Biesheuvel:

 - Enable mirrored memory for arm64

 - Fix up several abuses of the efivar API

 - Refactor the efivar API in preparation for moving the 'business
   logic' part of it into efivarfs

 - Enable ACPI PRM on arm64

* tag 'efi-next-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
  ACPI: Move PRM config option under the main ACPI config
  ACPI: Enable Platform Runtime Mechanism(PRM) support on ARM64
  ACPI: PRM: Change handler_addr type to void pointer
  efi: Simplify arch_efi_call_virt() macro
  drivers: fix typo in firmware/efi/memmap.c
  efi: vars: Drop __efivar_entry_iter() helper which is no longer used
  efi: vars: Use locking version to iterate over efivars linked lists
  efi: pstore: Omit efivars caching EFI varstore access layer
  efi: vars: Add thin wrapper around EFI get/set variable interface
  efi: vars: Don't drop lock in the middle of efivar_init()
  pstore: Add priv field to pstore_record for backend specific use
  Input: applespi - avoid efivars API and invoke EFI services directly
  selftests/kexec: remove broken EFI_VARS secure boot fallback check
  brcmfmac: Switch to appropriate helper to load EFI variable contents
  iwlwifi: Switch to proper EFI variable store interface
  media: atomisp_gmin_platform: stop abusing efivar API
  efi: efibc: avoid efivar API for setting variables
  efi: avoid efivars layer when loading SSDTs from variables
  efi: Correct comment on efi_memmap_alloc
  memblock: Disable mirror feature if kernelcore is not specified
  ...

Pull 9p iov_iter fix from Al Viro:
 "net/9p abuses iov_iter primitives - it attempts to copy _from_ a
  destination-only iov_iter when it handles Rerror arriving in reply to
  zero-copy request.   Not hard to fix, fortunately.

  This is a prereq for the iov_iter_get_pages() work in the second part
  of iov_iter series, ended up in a separate branch"

* tag 'pull-work.9p' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  9p: handling Rerror without copy_from_iter_full()

Pull copy_to_iter_mc fix from Al Viro:
 "Backportable fix for copy_to_iter_mc() - the second part of iov_iter
  work will pretty much overwrite this, but would be much harder to
  backport"

* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix short copy handling in copy_mc_pipe_to_iter()

Pull vfs iov_iter updates from Al Viro:
 "Part 1 - isolated cleanups and optimizations.

  One of the goals is to reduce the overhead of using ->read_iter() and
  ->write_iter() instead of ->read()/->write().

  new_sync_{read,write}() has a surprising amount of overhead, in
  particular inside iocb_flags(). That's the explanation for the
  beginning of the series is in this pile; it's not directly
  iov_iter-related, but it's a part of the same work..."

* tag 'pull-work.iov_iter-base' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  first_iovec_segment(): just return address
  iov_iter: massage calling conventions for first_{iovec,bvec}_segment()
  iov_iter: first_{iovec,bvec}_segment() - simplify a bit
  iov_iter: lift dealing with maxpages out of first_{iovec,bvec}_segment()
  iov_iter_get_pages{,_alloc}(): cap the maxsize with MAX_RW_COUNT
  iov_iter_bvec_advance(): don't bother with bvec_iter
  copy_page_{to,from}_iter(): switch iovec variants to generic
  keep iocb_flags() result cached in struct file
  iocb: delay evaluation of IS_SYNC(...) until we want to check IOCB_DSYNC
  struct file: use anonymous union member for rcuhead and llist
  btrfs: use IOMAP_DIO_NOSYNC
  teach iomap_dio_rw() to suppress dsync
  No need of likely/unlikely on calls of check_copy_size()

Pull vfs dcache updates from Al Viro:
 "The main part here is making parallel lookups safe for RT - making
  sure preemption is disabled in start_dir_add()/ end_dir_add() sections
  (on non-RT it's automatic, on RT it needs to to be done explicitly)
  and moving wakeups from __d_lookup_done() inside of such to the end of
  those sections.

  Wakeups can be safely delayed for as long as ->d_lock on in-lookup
  dentry is held; proving that has caught a bug in d_add_ci() that
  allows memory corruption when sufficiently bogus ntfs (or
  case-insensitive xfs) image is mounted. Easily fixed, fortunately"

* tag 'pull-work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs/dcache: Move wakeup out of i_seq_dir write held region.
  fs/dcache: Move the wakeup from __d_lookup_done() to the caller.
  fs/dcache: Disable preemption on i_dir_seq write side on PREEMPT_RT
  d_add_ci(): make sure we don't miss d_lookup_done()

Pull vfs lseek updates from Al Viro:
 "Jason's lseek series.

  Saner handling of 'lseek should fail with ESPIPE' - this gets rid of
  the magical no_llseek thing and makes checks consistent.

  In particular, the ad-hoc "can we do splice via internal pipe" checks
  got saner (and somewhat more permissive, which is what Jason had been
  after, AFAICT)"

* tag 'pull-work.lseek' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: remove no_llseek
  fs: check FMODE_LSEEK to control internal pipe splicing
  vfio: do not set FMODE_LSEEK flag
  dma-buf: remove useless FMODE_LSEEK flag
  fs: do not compare against ->llseek
  fs: clear or set FMODE_LSEEK based on llseek function

Pull vfs namei updates from Al Viro:
 "RCU pathwalk cleanups.

  Storing sampled ->d_seq of the next dentry in nameidata simplifies
  life considerably, especially if we delay fetching ->d_inode until
  step_into()"

* tag 'pull-work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  step_into(): move fetching ->d_inode past handle_mounts()
  lookup_fast(): don't bother with inode
  follow_dotdot{,_rcu}(): don't bother with inode
  step_into(): lose inode argument
  namei: stash the sampled ->d_seq into nameidata
  namei: move clearing LOOKUP_RCU towards rcu_read_unlock()
  switch try_to_unlazy_next() to __legitimize_mnt()
  follow_dotdot{,_rcu}(): change calling conventions
  namei: get rid of pointless unlikely(read_seqcount_retry(...))
  __follow_mount_rcu(): verify that mount_lock remains unchanged

Pull folio updates from Matthew Wilcox:

 - Fix an accounting bug that made NR_FILE_DIRTY grow without limit
   when running xfstests

 - Convert more of mpage to use folios

 - Remove add_to_page_cache() and add_to_page_cache_locked()

 - Convert find_get_pages_range() to filemap_get_folios()

 - Improvements to the read_cache_page() family of functions

 - Remove a few unnecessary checks of PageError

 - Some straightforward filesystem conversions to use folios

 - Split PageMovable users out from address_space_operations into
   their own movable_operations

 - Convert aops->migratepage to aops->migrate_folio

 - Remove nobh support (Christoph Hellwig)

* tag 'folio-6.0' of git://git.infradead.org/users/willy/pagecache: (78 commits)
  fs: remove the NULL get_block case in mpage_writepages
  fs: don't call ->writepage from __mpage_writepage
  fs: remove the nobh helpers
  jfs: stop using the nobh helper
  ext2: remove nobh support
  ntfs3: refactor ntfs_writepages
  mm/folio-compat: Remove migration compatibility functions
  fs: Remove aops->migratepage()
  secretmem: Convert to migrate_folio
  hugetlb: Convert to migrate_folio
  aio: Convert to migrate_folio
  f2fs: Convert to filemap_migrate_folio()
  ubifs: Convert to filemap_migrate_folio()
  btrfs: Convert btrfs_migratepage to migrate_folio
  mm/migrate: Add filemap_migrate_folio()
  mm/migrate: Convert migrate_page() to migrate_folio()
  nfs: Convert to migrate_folio
  btrfs: Convert btree_migratepage to migrate_folio
  mm/migrate: Convert expected_page_refs() to folio_expected_refs()
  mm/migrate: Convert buffer_migrate_page() to buffer_migrate_folio()
  ...

Pull XArray/IDR updates from Matthew Wilcox:

 - Add appropriate might_alloc() annotations to the XArray APIs

 - Document that the IDR is deprecated

* tag 'xarray-6.0' of git://git.infradead.org/users/willy/xarray:
  IDR: Note that the IDR API is deprecated
  XArray: Add calls to might_alloc()

Pull cgroup updates from Tejun Heo:
 "Several core optimizations:

   - threadgroup_rwsem write locking is skipped when configuring
     controllers in empty subtrees.

     Combined with CLONE_INTO_CGROUP, this allows the common static
     usage pattern to not grab threadgroup_rwsem at all (glibc still
     doesn't seem ready for CLONE_INTO_CGROUP unfortunately).

   - threadgroup_rwsem used to be put into non-percpu mode by default
     due to latency concerns in specific use cases. There's no reason
     for everyone else to pay for it. Make the behavior optional.

   - psi no longer allocates memory when disabled.

  ... along with some code cleanups"

* tag 'cgroup-for-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Skip subtree root in cgroup_update_dfl_csses()
  cgroup: remove "no" prefixed mount options
  cgroup: Make !percpu threadgroup_rwsem operations optional
  cgroup: Add "no" prefixed mount options
  cgroup: Elide write-locking threadgroup_rwsem when updating csses on an empty subtree
  cgroup.c: remove redundant check for mixable cgroup in cgroup_migrate_vet_dst
  cgroup.c: add helper __cset_cgroup_from_root to cleanup duplicated codes
  psi: dont alloc memory for psi by default

The AVR32 architecture does no longer exist in the Linux kernel, hence
remove a reference to also non-existing Linux BSP CD from Atmel.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>

The AVR32 architecture has been removed from the kernel in commit
26202873, hence clean out the
atmel,at32ap-lcdc parts in the atmel_lcdfb.c video driver.

AVR32 architecture never supported device tree, hence this code was not
used by anybody.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>

The AVR32 architecture does no longer exist in the Linux kernel, hence
remove a reference to it in Kconfig help text to avoid confusion.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>

The AVR32 architecture does no longer exist in the Linux kernel, hence
remove a reference to it in Kconfig help text to avoid confusion.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>

The AVR32 architecture has been removed from the kernel in commit
26202873, hence clean out the
cdns,at32ap7000-macb compatible entry in Cadence macb Ethernet driver.

AVR32 architecture never supported device tree, hence this code was not
used by anybody.

Updated documentation to match the default entry, no users of
cdns,at32ap7000-macb in the kernel tree.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>

I have changed my overall maintainer email address to the samfundet.no
domain, hence update the atmel-ssc module to reflect that.

Also remove the AVR32 reference, since the AVR32 architecture no longer
exist in the Linux kernel.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>

The AVR32 architecture does no longer exist in the Linux kernel, hence
remove a reference to it in comments to avoid confusion.
Signed-off-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>