- 07 Apr, 2022 5 commits
-
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2022-04-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-next-fixes for v5.18-rc2: - fix warning about fence containers - fix logic error in new fence merge code - handle empty dma_fence_arrays gracefully - Try all possible cases for bridge/panel detection. Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3b8e6439-612e-f640-e380-51e834393e94@linux.intel.com
-
Dave Airlie authored
Merge tag 'amd-drm-fixes-5.18-2022-04-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.18-2022-04-06: amdgpu: - VCN 3.0 fixes - DCN 3.1.5 fix - Misc display fixes - GC 10.3 golden register fix - Suspend fix - SMU 10 fix amdkfd: - Event fix Signed-off-by:
-
git://git.pengutronix.de/pza/linuxDave Airlie authored
drm/imx: error handling and debug output fixes Catch an EDID allocation failure in imx-ldb, fix a leaked drm display mode on DT parsing error in parallel-display, properly remove the dw_hdmi bridge in case the component_add fails in dw_hdmi-imx, and fix the IPU clock frequency debug printout in ipu-di. Signed-off-by:
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
* drm/panel/ili9341: Fix optional regulator handling Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.18-2022-03-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-next-5.18-2022-03-25: amdgpu: - GFX 10.3.7 fixes - noretry updates - VCN fixes - TMDS fix - zstate fix for freesync video - DCN 3.1.5 fix - Display stack size fix - Audio fix - DCN 3.1 pstate fix - TMZ VCN fix - APU passthrough fix - Misc other fixes amdkfd: - Error handling fix - xgmi p2p fix - HWS VMIDs fix Signed-off-by:
-
- 06 Apr, 2022 20 commits
-
-
Alex Deucher authored
SMU takes clock limits in Mhz units. socclk and fclk were using 10 khz units in some cases. Switch to Mhz units. Fixes higher than required SoC clocks. Fixes: 97cf3299 ("drm/amd/pm: Removed fixed clock in auto mode DPM") Reviewed-by:
Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Dmytro Laktyushkin authored
[Why & How] Make dcn315 base its clock table off dcfclk rather than fclk. This change also adds some sanity checking to make sure an empty pmfw table does not result in invalid dal clocks. Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by:
-
Benjamin Marty authored
Fixes crash on MST Hub disconnect. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1849 Fixes: ee2698cf ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split") Signed-off-by:
Benjamin Marty <info@benjaminmarty.ch> Signed-off-by:
-
Jimmy Kizito authored
[Why] Work around to try to wake unresponsive DP sinks may need to be adjusted for certain sinks. [How] Add options to disable work around or adjust time spent trying to wake unresponsive DPRX. Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Acked-by:
Tom Chung <chiahsuan.chung@amd.com> Signed-off-by:
Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by:
-
Eric Bernstein authored
Remove assert that will hit during odm transition case, since this is a valid case. Tested-by:
Alvin Lee <alvin.lee2@amd.com> Acked-by:
Eric Bernstein <eric.bernstein@amd.com> Signed-off-by:
-
Alex Deucher authored
Seems to cause a reboots or hangs on some systems. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1924 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1953 Fixes: daf8de08 ("drm/amdgpu: always reset the asic in suspend (v2)") Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
CHANDAN VURDIGERE NATARAJ authored
[Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 #12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled. Signed-off-by:
CHANDAN VURDIGERE NATARAJ <chandan.vurdigerenataraj@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Lee Jones authored
This ensures userspace cannot prematurely clean-up the client before it is fully initialised which has been proven to cause issues in the past. Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Ma Jun authored
Sync up header and implementation to use the same parameter names in function amdgpu_ring_init. ring_size -> max_dw, prio -> hw_prio Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Ma Jun <Jun.Ma2@amd.com> Signed-off-by:
-
Ruili Ji authored
gfx10.3.3/gfx10.3.6/gfx10.3.7 shall use 0x1580 address for GCR_GENERAL_CNTL Acked-by:
Prike Liang <Prike.Liang@amd.com> Acked-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
Aaron Liu <aaron.liu@amd.com> Signed-off-by:
Ruili Ji <ruiliji2@amd.com> Signed-off-by:
-
Shirish S authored
[Why] comparing pwm bl values (coverted) with user brightness(converted) levels in commit_tail leads to continuous setting of backlight via dmub as they don't to match. This leads overdrive in queuing of commands to DMCU that sometimes lead to depending on load on DMCU fw: "[drm:dc_dmub_srv_wait_idle] *ERROR* Error waiting for DMUB idle: status=3" [How] Store last successfully set backlight value and compare with it instead of pwm reads which is not what we should compare with. Signed-off-by:
Shirish S <shirish.s@amd.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Roman Li authored
[Why] On resume we do link detection for all non-MST connectors. MST is handled separately. However the condition for telling if connector is on mst branch is not enough for mst hub case. Link detection for mst branch link leads to mst topology reset. That causes assert in dc_link_allocate_mst_payload() [How] Use link type as indicator for mst link. Reviewed-by:
Wayne Lin <Wayne.Lin@amd.com> Acked-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Roman Li <Roman.Li@amd.com> Tested-by:
-
Martin Leung authored
why and how: causes failure on install on certain machines Reviewed-by:
George Shen <George.Shen@amd.com> Acked-by:
-
Jimmy Kizito authored
[Why] When waking from low-power states, a DP sink may remain unresponsive to AUX transactions. [How] Try to toggle DPCD SET_POWER register repeatedly (up to a maximum timeout value) until DP sink becomes responsive. Reviewed-by:
Mustapha Ghaddar <Mustapha.Ghaddar@amd.com> Acked-by:
-
Charlene Liu authored
[why] when disable optc, need to clear the underflow status as well. Reviewed-by:
Chris Park <Chris.Park@amd.com> Acked-by:
-
Roman Li authored
[Why] In init_hw() we call init_pipes() before enabling power gating. init_pipes() tries to power gate dsc but it may fail because required force-ons are not released yet. As a result with dsc config the following errors observed on resume: "REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control" [How] Move enable_power_gating_plane() before init_pipes() in init_hw() Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Reviewed-by:
Eric Yang <Eric.Yang2@amd.com> Acked-by:
-
Roman Li authored
[Why] DSC Power down code has been moved from dcn31_init_hw into init_pipes() Need to remove it from dcn10_init_hw() as well to avoid duplicated action on dcn1.x/2.x [How] Remove DSC power down code from dcn10_init_hw() Fixes: 8fa6f4c5 ("drm/amd/display: fixed the DSC power off sequence during Driver PnP") Reviewed-by:
-
Chris Park authored
[Why] Once DSC slice cannot fit pixel clock, we incorrectly reset min slices to 0 and allow max slice to operate, even when max slice itself cannot fit the pixel clock properly. [How] Change the sequence such that we correctly determine DSC is not possible when both min slices and max slices cannot fit pixel clock per slice. Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
-
tiancyin authored
Some video card has more than one vcn instance, passing 0 to vcn_v3_0_pause_dpg_mode is incorrect. Error msg: Register(1) [mmUVD_POWER_STATUS] failed to reach value 0x00000001 != 0x00000002 Reviewed-by:
James Zhu <James.Zhu@amd.com> Signed-off-by:
tiancyin <tianci.yin@amd.com> Signed-off-by:
-
Boyuan Zhang authored
For VCN FW to detect ASIC type, in order to use different mailbox registers. V2: simplify codes and fix format issue. Signed-off-by:
Boyuan Zhang <boyuan.zhang@amd.com> Acked-by Huang Rui <ray.huang@amd.com> Signed-off-by:
-
- 04 Apr, 2022 4 commits
-
-
Leo Ruan authored
This commit corrects the printing of the IPU clock error percentage if it is between -0.1% to -0.9%. For example, if the pixel clock requested is 27.2 MHz but only 27.0 MHz can be achieved the deviation is -0.8%. But the fixed point math had a flaw and calculated error of 0.2%. Before: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error 0.2% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz After: Clocks: IPU 270000000Hz DI 24716667Hz Needed 27200000Hz IPU clock can give 27000000 with divider 10, error -0.8% Want 27200000Hz IPU 270000000Hz DI 24716667Hz using IPU, 27000000Hz Signed-off-by:
Leo Ruan <tingquan.ruan@cn.bosch.com> Signed-off-by:
Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Liu Ying authored
In dw_hdmi_imx_probe(), if error happens after dw_hdmi_probe() returns successfully, dw_hdmi_remove() should be called where necessary as bailout. Fixes: c805ec7e ("drm/imx: dw_hdmi-imx: move initialization into probe") Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Signed-off-by:
Liu Ying <victor.liu@nxp.com> Signed-off-by:
-
José Expósito authored
Avoid leaking the display mode variable if of_get_drm_display_mode fails. Fixes: 76ecd9c9 ("drm/imx: parallel-display: check return code from of_get_drm_display_mode()") Addresses-Coverity-ID: 1443943 ("Resource leak") Signed-off-by:
José Expósito <jose.exposito89@gmail.com> Signed-off-by:
-
Jiasheng Jiang authored
As the possible failure of the allocation, kmemdup() may return NULL pointer. Therefore, it should be better to check the return value of kmemdup() and return error if fails. Fixes: dc80d703 ("drm/imx-ldb: Add support to drm-bridge") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by:
-
- 03 Apr, 2022 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull more tracing updates from Steven Rostedt: - Rename the staging files to give them some meaning. Just stage1,stag2,etc, does not show what they are for - Check for NULL from allocation in bootconfig - Hold event mutex for dyn_event call in user events - Mark user events to broken (to work on the API) - Remove eBPF updates from user events - Remove user events from uapi header to keep it from being installed. - Move ftrace_graph_is_dead() into inline as it is called from hot paths and also convert it into a static branch. * tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Move user_events.h temporarily out of include/uapi ftrace: Make ftrace_graph_is_dead() a static branch tracing: Set user_events to BROKEN tracing/user_events: Remove eBPF interfaces tracing/user_events: Hold event_mutex during dyn_event_add proc: bootconfig: Add null pointer check tracing: Rename the staging files for trace_events
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes and updates: - Make the prctl() for enabling dynamic XSTATE components correct so it adds the newly requested feature to the permission bitmap instead of overwriting it. Add a selftest which validates that. - Unroll string MMIO for encrypted SEV guests as the hypervisor cannot emulate it. - Handle supervisor states correctly in the FPU/XSTATE code so it takes the feature set of the fpstate buffer into account. The feature sets can differ between host and guest buffers. Guest buffers do not contain supervisor states. So far this was not an issue, but with enabling PASID it needs to be handled in the buffer offset calculation and in the permission bitmaps. - Avoid a gazillion of repeated CPUID invocations in by caching the values early in the FPU/XSTATE code. - Enable CONFIG_WERROR in x86 defconfig. - Make the X86 defconfigs more useful by adapting them to Y2022 reality" * tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/xstate: Consolidate size calculations x86/fpu/xstate: Handle supervisor states in XSTATE permissions x86/fpu/xsave: Handle compacted offsets correctly with supervisor states x86/fpu: Cache xfeature flags from CPUID x86/fpu/xsave: Initialize offset/size cache early x86/fpu: Remove unused supervisor only offsets x86/fpu: Remove redundant XCOMP_BV initialization x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO x86/config: Make the x86 defconfigs a bit more usable x86/defconfig: Enable WERROR selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RT signal fix from Thomas Gleixner: "Revert the RT related signal changes. They need to be reworked and generalized" * tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull more dma-mapping updates from Christoph Hellwig: - fix a regression in dma remap handling vs AMD memory encryption (me) - finally kill off the legacy PCI DMA API (Christophe JAILLET) * tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move pgprot_decrypted out of dma_pgprot PCI/doc: cleanup references to the legacy PCI DMA API PCI: Remove the deprecated "pci-dma-compat.h" API
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - avoid unnecessary rebuilds for library objects - fix return value of __setup handlers - fix invalid input check for "crashkernel=" kernel option - silence KASAN warnings in unwind_frame * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame() ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0' ARM: 9187/1: JIVE: fix return value of __setup handler ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
-
Stephen Boyd authored
This reverts commit 7dabfa2b. There are multiple reports that this breaks boot on various systems. The common theme is that orphan clks are having rates set on them when that isn't expected. Let's revert it out for now so that -rc1 boots. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reported-by:
Tony Lindgren <tony@atomide.com> Reported-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
-
- 02 Apr, 2022 3 commits
-
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Avoid SEGV if core.cpus isn't set in 'perf stat'. - Stop depending on .git files for building PERF-VERSION-FILE, used in 'perf --version', fixing some perf tools build scenarios. - Convert tracepoint.py example to python3. - Update UAPI header copies from the kernel sources: socket, mman-common, msr-index, KVM, i915 and cpufeatures. - Update copy of libbpf's hashmap.c. - Directly return instead of using local ret variable in evlist__create_syswide_maps(), found by coccinelle. * tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf python: Convert tracepoint.py example to python3 perf evlist: Directly return instead of using local ret variable perf cpumap: More cpu map reuse by merge. perf cpumap: Add is_subset function perf evlist: Rename cpus to user_requested_cpus perf tools: Stop depending on .git files for building PERF-VERSION-FILE tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools kvm headers arm64: Update KVM headers from the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: Sync asm-generic/mman-common.h with the kernel perf beauty: Update copy of linux/socket.h with the kernel sources perf tools: Update copy of libbpf's hashmap.c perf stat: Avoid SEGV if core.cpus isn't set
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix empty $(PYTHON) expansion. - Fix UML, which got broken by the attempt to suppress Clang warnings. - Fix warning message in modpost. * tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: restore the warning message for missing symbol versions Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS" kbuild: Remove '-mno-global-merge' kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh kconfig: remove stale comment about removed kconfig_print_symbol()
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - build fix for gpio - fix crc32 build problems - check for failed memory allocations * tag 'mips_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: crypto: Fix CRC32 code MIPS: rb532: move GPIOD definition into C-files MIPS: lantiq: check the return value of kzalloc() mips: sgi-ip22: add a check for the return of kzalloc()
-
