There could be significant delay in CPTS work schedule under high system
load and on -RT which could cause CPTS misbehavior due to internal counter
overflow. Usage of own kthread_worker allows to avoid such kind of issues
and makes it possible to tune priority of CPTS kthread_worker thread on -RT
(thread name "cpts").

Hence, the CPTS driver is converted to use PTP auxiliary worker as PHC
subsystem implements such functionality in a generic way now.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Many PTP drivers required to perform some asynchronous or periodic work,
like periodically handling PHC counter overflow or handle delayed timestamp
for RX/TX network packets. In most of the cases, such work is implemented
using workqueues. Unfortunately, Kernel workqueues might introduce
significant delay in work scheduling under high system load and on -RT,
which could cause misbehavior of PTP drivers due to internal counter
overflow, for example, and there is no way to tune its execution policy and
priority manuallly.

Hence, The kthread_worker can be used insted of workqueues, as it create
separte named kthread for each worker and its its execution policy and
priority can be configured using chrt tool.

This prblem was reported for two drivers TI CPSW CPTS and dp83640, so
instead of modifying each of these driver it was proposed to add PTP
auxiliary worker to the PHC subsystem.

The patch adds PTP auxiliary worker in PHC subsystem using kthread_worker
and kthread_delayed_work and introduces two new PHC subsystem APIs:

- long (*do_aux_work)(struct ptp_clock_info *ptp) callback in
ptp_clock_info structure, which driver should assign if it require to
perform asynchronous or periodic work. Driver should return the delay of
the PTP next auxiliary work scheduling time (>=0) or negative value in case
further scheduling is not required.

- int ptp_schedule_worker(struct ptp_clock *ptp, unsigned long delay) which
allows schedule PTP auxiliary work.

The name of kthread_worker thread corresponds PTP PHC device name "ptp%d".
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Handle notifier registry failures properly in tun/tap driver, from
    Tonghao Zhang.

 2) Fix bpf verifier handling of subtraction bounds and add a testcase
    for this, from Edward Cree.

 3) Increase reset timeout in ftgmac100 driver, from Ben Herrenschmidt.

 4) Fix use after free in prd_retire_rx_blk_timer_exired() in AF_PACKET,
    from Cong Wang.

 5) Fix SElinux regression due to recent UDP optimizations, from Paolo
    Abeni.

 6) We accidently increment IPSTATS_MIB_FRAGFAILS in the ipv6 code
    paths, fix from Stefano Brivio.

 7) Fix some mem leaks in dccp, from Xin Long.

 8) Adjust MDIO_BUS kconfig deps to avoid build errors, from Arnd
    Bergmann.

 9) Mac address length check and buffer size fixes from Cong Wang.

10) Don't leak sockets in ipv6 udp early demux, from Paolo Abeni.

11) Fix return value when copy_from_user() fails in
    bpf_prog_get_info_by_fd(), from Daniel Borkmann.

12) Handle PHY_HALTED properly in phy library state machine, from
    Florian Fainelli.

13) Fix OOPS in fib_sync_down_dev(), from Ido Schimmel.

14) Fix truesize calculation in virtio_net which led to performance
    regressions, from Michael S Tsirkin.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
  samples/bpf: fix bpf tunnel cleanup
  udp6: fix jumbogram reception
  ppp: Fix a scheduling-while-atomic bug in del_chan
  Revert "net: bcmgenet: Remove init parameter from bcmgenet_mii_config"
  virtio_net: fix truesize for mergeable buffers
  mv643xx_eth: fix of_irq_to_resource() error check
  MAINTAINERS: Add more files to the PHY LIBRARY section
  ipv4: fib: Fix NULL pointer deref during fib_sync_down_dev()
  net: phy: Correctly process PHY_HALTED in phy_stop_machine()
  sunhme: fix up GREG_STAT and GREG_IMASK register offsets
  bpf: fix bpf_prog_get_info_by_fd to dump correct xlated_prog_len
  tcp: avoid bogus gcc-7 array-bounds warning
  net: tc35815: fix spelling mistake: "Intterrupt" -> "Interrupt"
  bpf: don't indicate success when copy_from_user fails
  udp6: fix socket leak on early demux
  net: thunderx: Fix BGX transmit stall due to underflow
  Revert "vhost: cache used event for better performance"
  team: use a larger struct for mac address
  net: check dev->addr_len for dev_set_mac_address()
  phy: bcm-ns-usb3: fix MDIO_BUS dependency
  ...

test_tunnel_bpf.sh fails to remove the vxlan11 tunnel device, causing the
next geneve tunnelling test case fails.  In addition, the geneve reserved bit
in tcbpf2_kern.c should be zero, according to the RFC.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 67a51780 ("ipv6: udp: leverage scratch area
helpers") udp6_recvmsg() read the skb len from the scratch area,
to avoid a cache miss.
But the UDP6 rx path support RFC 2675 UDPv6 jumbograms, and their
length exceeds the 16 bits available in the scratch area. As a side
effect the length returned by recvmsg() is:
<ingress datagram len> % (1<<16)

This commit addresses the issue allocating one more bit in the
IP6CB flags field and setting it for incoming jumbograms.
Such field is still in the first cacheline, so at recvmsg()
time we can check it and fallback to access skb->len if
required, without a measurable overhead.

Fixes: 67a51780 ("ipv6: udp: leverage scratch area helpers")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The PPTP set the pptp_sock_destruct as the sock's sk_destruct, it would
trigger this bug when __sk_free is invoked in atomic context, because of
the call path pptp_sock_destruct->del_chan->synchronize_rcu.

Now move the synchronize_rcu to pptp_release from del_chan. This is the
only one case which would free the sock and need the synchronize_rcu.

The following is the panic I met with kernel 3.3.8, but this issue should
exist in current kernel too according to the codes.

BUG: scheduling while atomic
__schedule_bug+0x5e/0x64
__schedule+0x55/0x580
? ppp_unregister_channel+0x1cd5/0x1de0 [ppp_generic]
? dev_hard_start_xmit+0x423/0x530
? sch_direct_xmit+0x73/0x170
__cond_resched+0x16/0x30
_cond_resched+0x22/0x30
wait_for_common+0x18/0x110
? call_rcu_bh+0x10/0x10
wait_for_completion+0x12/0x20
wait_rcu_gp+0x34/0x40
? wait_rcu_gp+0x40/0x40
synchronize_sched+0x1e/0x20
0xf8417298
0xf8417484
? sock_queue_rcv_skb+0x109/0x130
__sk_free+0x16/0x110
? udp_queue_rcv_skb+0x1f2/0x290
sk_free+0x16/0x20
__udp4_lib_rcv+0x3b8/0x650
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 28b45910 ("net: bcmgenet: Remove init parameter
from bcmgenet_mii_config") because in the process of moving from
dev_info() to dev_info_once() we essentially lost the helpful printed
messages once the second instance of the driver is loaded.
dev_info_once() does not actually print the message once per device
instance, but once period.

Fixes: 28b45910 ("net: bcmgenet: Remove init parameter from bcmgenet_mii_config")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Seth Forshee noticed a performance degradation with some workloads.
This turns out to be due to packet drops.  Euan Kemp noticed that this
is because we drop all packets where length exceeds the truesize, but
for some packets we add in extra memory without updating the truesize.
This in turn was kept around unchanged from ab7db917 ("virtio-net:
auto-tune mergeable rx buffer size for improved performance").  That
commit had an internal reason not to account for the extra space: not
enough bits to do it.  No longer true so let's account for the allocated
length exactly.

Many thanks to Seth Forshee for the report and bisecting and Euan Kemp
for debugging the issue.

Fixes: 680557cf ("virtio_net: rework mergeable buffer handling")
Reported-by: Euan Kemp <euan.kemp@coreos.com>
Tested-by: Euan Kemp <euan.kemp@coreos.com>
Reported-by: Seth Forshee <seth.forshee@canonical.com>
Tested-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

of_irq_to_resource() has recently been  fixed to return negative error #'s
along with 0 in case of failure,  however the Marvell MV643xx Ethernet
driver still only regards 0  as invalid IRQ -- fix it up.

Fixes: 7a4228bb ("of: irq: use of_irq_get() in of_irq_to_resource()")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Include missing files that are provided by, used, or directly maintained
within the PHY LIBRARY, this include uapi header, header files used by
Device Tree code etc.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Michał reported a NULL pointer deref during fib_sync_down_dev() when
unregistering a netdevice. The problem is that we don't check for
'in_dev' being NULL, which can happen in very specific cases.

Usually routes are flushed upon NETDEV_DOWN sent in either the netdev or
the inetaddr notification chains. However, if an interface isn't
configured with any IP address, then it's possible for host routes to be
flushed following NETDEV_UNREGISTER, after NULLing dev->ip_ptr in
inetdev_destroy().

To reproduce:
$ ip link add type dummy
$ ip route add local 1.1.1.0/24 dev dummy0
$ ip link del dev dummy0

Fix this by checking for the presence of 'in_dev' before referencing it.

Fixes: 982acb97 ("ipv4: fib: Notify about nexthop status changes")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Tested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

Marc reported that he was not getting the PHY library adjust_link()
callback function to run when calling phy_stop() + phy_disconnect()
which does not indeed happen because we set the state machine to
PHY_HALTED but we don't get to run it to process this state past that
point.

Fix this with a synchronous call to phy_state_machine() in order to have
the state machine actually act on PHY_HALTED, set the PHY device's link
down, turn the network device's carrier off and finally call the
adjust_link() function.
Reported-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Fixes: a390d1f3 ("phylib: convert state_queue work to delayed_work")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update the values to match those from the STP2002QFP documentation.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull cgroup fixes from Tejun Heo:
 "Several cgroup bug fixes.

   - cgroup core was calling a migration callback on empty migrations,
     which could make cpuset crash.

   - There was a very subtle bug where the controller interface files
     aren't created directly when cgroup2 is mounted. Because later
     operations create them, this bug didn't get noticed earlier.

   - Failed writes to cgroup.subtree_control were incorrectly returning
     zero"

* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: fix error return value from cgroup_subtree_control()
  cgroup: create dfl_root files on subsys registration
  cgroup: don't call migration methods if there are no tasks to migrate

Pull workqueue fixes from Tejun Heo:
 "Two notable fixes.

   - While adding NUMA affinity support to unbound workqueues, the
     assumption that an unbound workqueue with max_active == 1 is
     ordered was broken.

     The plan was to use explicit alloc_ordered_workqueue() for those
     cases. Unfortunately, I forgot to update the documentation properly
     and we grew a handful of use cases which depend on that assumption.

     While we want to convert them to alloc_ordered_workqueue(), we
     don't really lose anything by enforcing ordered execution on
     unbound max_active == 1 workqueues and it doesn't make sense to
     risk subtle bugs. Restore the assumption.

   - Workqueue assumes that CPU <-> NUMA node mapping remains static.

     This is a general assumption - we don't have any synchronization
     mechanism around CPU <-> node mapping. Unfortunately, powerpc may
     change the mapping dynamically leading to crashes. Michael added a
     workaround so that we at least don't crash while powerpc hotplug
     code gets updated"

* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Work around edge cases for calc of pool's cpumask
  workqueue: implicit ordered attribute should be overridable
  workqueue: restore WQ_UNBOUND/max_active==1 to be ordered

Pull libata fixes from Tejun Heo:
 "Dan found a really old bug where libata hotplug code wasn't sanitizing
  index value from userland and may end up indexing with a negative
  number. It is scary but fortunately can only be triggered by root.

  Other than that, minor fixes"

* 'for-4.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  libata: fix a couple of doc build warnings
  libata: array underflow in ata_find_dev()
  ata: sata_rcar: add gen[23] fallback compatibility strings
  libata: remove unused rc in ata_eh_handle_port_resume
  libata: Cleanup ata_read_log_page()
  ata: fix gemini Kconfig dependencies

The kerneldoc comments for a couple of functions in drivers/ata/libata-eh.c
had fallen behind the current implementation, resulting in these doc build
warnings:

  ./drivers/ata/libata-eh.c:1449: warning: No description found for parameter 'link'
  ./drivers/ata/libata-eh.c:1449: warning: Excess function parameter 'ap' description in 'ata_eh_done'
  ./drivers/ata/libata-eh.c:1590: warning: No description found for parameter 'qc'
  ./drivers/ata/libata-eh.c:1590: warning: Excess function parameter 'dev' description in 'ata_eh_request_sense'

Update the comments and make the warnings go away.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Tejun Heo <tj@kernel.org>

Pull x86 fixes from Thomas Gleixner:
 "A small set of x86 fixes:

   - prevent the kernel from using the EFI reboot method when EFI is
     disabled.

   - two patches addressing clang issues"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Disable the address-of-packed-member compiler warning
  x86/efi: Fix reboot_mode when EFI runtime services are disabled
  x86/boot: #undef memcpy() et al in string.c

Pull scheduler fixes from Thomas Gleixner:
 "Two patches addressing build warnings caused by inconsistent kernel
  doc comments"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/wait: Clean up some documentation warnings
  sched/core: Fix some documentation build warnings

Pull perf fixes from Thomas Gleixner:
 "A couple of fixes for performance counters and kprobes:

   - a series of small patches which make the uncore performance
     counters on Skylake server systems work correctly

   - add a missing instruction slot release to the failure path of
     kprobes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kprobes/x86: Release insn_slot in failure path
  perf/x86/intel/uncore: Fix missing marker for skx_uncore_cha_extra_regs
  perf/x86/intel/uncore: Fix SKX CHA event extra regs
  perf/x86/intel/uncore: Remove invalid Skylake server CHA filter field
  perf/x86/intel/uncore: Fix Skylake server CHA LLC_LOOKUP event umask
  perf/x86/intel/uncore: Fix Skylake server PCU PMU event format
  perf/x86/intel/uncore: Fix Skylake UPI PMU event masks

Pull irq fix from Thomas Gleixner:
 "Fix for a regression caused by the conversion of x86 to the generic
  hotplug code.

  Instead of doing a plain single line revert, this adds a pile of
  comments so the semantics of the force argument are clear"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/cpuhotplug: Revert "Set force affinity flag on hotplug migration"

bpf_prog_size(prog->len) is not the correct length we want to dump
back to user space. The code in bpf_prog_get_info_by_fd() uses this
to copy prog->insnsi to user space, but bpf_prog_size(prog->len) also
includes the size of struct bpf_prog itself plus program instructions
and is usually used either in context of accounting or for bpf_prog_alloc()
et al, thus we copy out of bounds in bpf_prog_get_info_by_fd()
potentially. Use the correct bpf_prog_insn_size() instead.

Fixes: 1e270976 ("bpf: Add BPF_OBJ_GET_INFO_BY_FD")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When using CONFIG_UBSAN_SANITIZE_ALL, the TCP code produces a
false-positive warning:

net/ipv4/tcp_output.c: In function 'tcp_connect':
net/ipv4/tcp_output.c:2207:40: error: array subscript is below array bounds [-Werror=array-bounds]
   tp->chrono_stat[tp->chrono_type - 1] += now - tp->chrono_start;
                                        ^~
net/ipv4/tcp_output.c:2207:40: error: array subscript is below array bounds [-Werror=array-bounds]
   tp->chrono_stat[tp->chrono_type - 1] += now - tp->chrono_start;
   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~

I have opened a gcc bug for this, but distros have already shipped
compilers with this problem, and it's not clear yet whether there is
a way for gcc to avoid the warning. As the problem is related to the
bitfield access, this introduces a temporary variable to store the old
enum value.

I did not notice this warning earlier, since UBSAN is disabled when
building with COMPILE_TEST, and that was always turned on in both
allmodconfig and randconfig tests.

Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81601Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2017-07-28' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.13

Two fixes for for brcmfmac, the crash was reported by two people
already so it's a high priority fix.

brcmfmac

* fix a crash in skb headroom handling in v4.13-rc1
* fix a memory leak due to a merge error in v4.6
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Trivial fix to spelling mistake in printk message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

err in bpf_prog_get_info_by_fd() still holds 0 at that time from prior
check_uarg_tail_zero() check. Explicitly return -EFAULT instead, so
user space can be notified of buggy behavior.

Fixes: 1e270976 ("bpf: Add BPF_OBJ_GET_INFO_BY_FD")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When an early demuxed packet reaches __udp6_lib_lookup_skb(), the
sk reference is retrieved and used, but the relevant reference
count is leaked and the socket destructor is never called.
Beyond leaking the sk memory, if there are pending UDP packets
in the receive queue, even the related accounted memory is leaked.

In the long run, this will cause persistent forward allocation errors
and no UDP skbs (both ipv4 and ipv6) will be able to reach the
user-space.

Fix this by explicitly accessing the early demux reference before
the lookup, and properly decreasing the socket reference count
after usage.

Also drop the skb_steal_sock() in __udp6_lib_lookup_skb(), and
the now obsoleted comment about "socket cache".

The newly added code is derived from the current ipv4 code for the
similar path.

v1 -> v2:
  fixed the __udp6_lib_rcv() return code for resubmission,
  as suggested by Eric
Reported-by: Sam Edwards <CFSworks@gmail.com>
Reported-by: Marc Haber <mh+netdev@zugschlus.de>
Fixes: 5425077d ("net: ipv6: Add early demux handler for UDP unicast")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For SGMII/RGMII/QSGMII interfaces when physical link goes down
while traffic is high is resulting in underflow condition being set
on that specific BGX's LMAC. Which assets a backpresure and VNIC stops
transmitting packets.

This is due to BGX being disabled in link status change callback while
packet is in transit. This patch fixes this issue by not disabling BGX
but instead just disables packet Rx and Tx.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 809ecb9b. Since it
was reported to break vhost_net. We want to cache used event and use
it to check for notification. The assumption was that guest won't move
the event idx back, but this could happen in fact when 16 bit index
wraps around after 64K entries.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2017-07-27

This series contains some misc fixes to the mlx5 driver.

Please pull and let me know if there's any problem.

V1->V2:
 - removed redundant braces

for -stable:
4.7
net/mlx5: Fix command bad flow on command entry allocation failure

4.9
net/mlx5: Consider tx_enabled in all modes on remap
net/mlx5e: Fix outer_header_zero() check size

4.10
net/mlx5: Fix mlx5_add_flow_rules call with correct num of dests

4.11
net/mlx5: Fix mlx5_ifc_mtpps_reg_bits structure size
net/mlx5e: Add field select to MTPPS register
net/mlx5e: Fix broken disable 1PPS flow
net/mlx5e: Change 1PPS out scheme
net/mlx5e: Add missing support for PTP_CLK_REQ_PPS request
net/mlx5e: Fix wrong delay calculation for overflow check scheduling
net/mlx5e: Schedule overflow check work to mlx5e workqueue

4.12
net/mlx5: Fix command completion after timeout access invalid structure
net/mlx5e: IPoIB, Modify add/remove underlay QPN flows

I hope this is not too much, but most of the patches do apply cleanly on -stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv6 tunnels use sizeof(struct in6_addr) as dev->addr_len,
but in many places especially bonding, we use struct sockaddr
to copy and set mac addr, this could lead to stack out-of-bounds
access.

Fix it by using a larger address storage like bonding.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Historically, dev_ifsioc() uses struct sockaddr as mac
address definition, this is why dev_set_mac_address()
accepts a struct sockaddr pointer as input but now we
have various types of mac addresse whose lengths
are up to MAX_ADDR_LEN, longer than struct sockaddr,
and saved in dev->addr_len.

It is too late to fix dev_ifsioc() due to API
compatibility, so just reject those larger than
sizeof(struct sockaddr), otherwise we would read
and use some random bytes from kernel stack.

Fortunately, only a few IPv6 tunnel devices have addr_len
larger than sizeof(struct sockaddr) and they don't support
ndo_set_mac_addr(). But with team driver, in lb mode, they
can still be enslaved to a team master and make its mac addr
length as the same.

Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull DeviceTree fixes from Rob Herring:
 "Two small DT fixes:

   - Fix error handling in of_irq_to_resource_table() due to
     of_irq_to_resource() error return changes.

   - Fix dtx_diff script due to dts include path changes"

* tag 'devicetree-fixes-for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  of: irq: fix of_irq_to_resource() error check
  scripts/dtc: dtx_diff - update include dts paths to match build

Pull NFS client fixes from Anna Schumaker:
 "More NFS client bugfixes for 4.13.

  Most of these fix locking bugs that Ben and Neil noticed, but I also
  have a patch to fix one more access bug that was reported after last
  week.

  Stable fixes:
   - Fix a race where CB_NOTIFY_LOCK fails to wake a waiter
   - Invalidate file size when taking a lock to prevent corruption

  Other fixes:
   - Don't excessively generate tiny writes with fallocate
   - Use the raw NFS access mask in nfs4_opendata_access()"

* tag 'nfs-for-4.13-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFSv4.1: Fix a race where CB_NOTIFY_LOCK fails to wake a waiter
  NFS: Optimize fallocate by refreshing mapping when needed.
  NFS: invalidate file size when taking a lock.
  NFS: Use raw NFS access mask in nfs4_opendata_access()

Pull xfs fixes from Darrick Wong:

 - fix firstfsb variables that we left uninitialized, which could lead
   to locking problems.

 - check for NULL metadata buffer pointers before using them.

 - don't allow btree cursor manipulation if the btree block is corrupt.
   Better to just shut down.

 - fix infinite loop problems in quotacheck.

 - fix buffer overrun when validating directory blocks.

 - fix deadlock problem in bunmapi.

* tag 'xfs-4.13-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix multi-AG deadlock in xfs_bunmapi
  xfs: check that dir block entries don't off the end of the buffer
  xfs: fix quotacheck dquot id overflow infinite loop
  xfs: check _alloc_read_agf buffer pointer before using
  xfs: set firstfsb to NULLFSBLOCK before feeding it to _bmapi_write
  xfs: check _btree_check_block value

Pull KVM fixes from Paolo Bonzini:
 "s390:
   - SRCU fix

  PPC:
   - host crash fixes

  x86:
   - bugfixes, including making nested posted interrupts really work

  Generic:
   - tweaks to kvm_stat and to uevents"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: LAPIC: Fix reentrancy issues with preempt notifiers
  tools/kvm_stat: add '-f help' to get the available event list
  tools/kvm_stat: use variables instead of hard paths in help output
  KVM: nVMX: Fix loss of L2's NMI blocking state
  KVM: nVMX: Fix posted intr delivery when vcpu is in guest mode
  x86: irq: Define a global vector for nested posted interrupts
  KVM: x86: do mask out upper bits of PAE CR3
  KVM: make pid available for uevents without debugfs
  KVM: s390: take srcu lock when getting/setting storage keys
  KVM: VMX: remove unused field
  KVM: PPC: Book3S HV: Fix host crash on changing HPT size
  KVM: PPC: Book3S HV: Enable TM before accessing TM registers

Pull xen fixes from Juergen Gross:
 "Three minor cleanups for xen related drivers"

* tag 'for-linus-4.13b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: dont fiddle with event channel masking in suspend/resume
  xen: selfballoon: remove unnecessary static in frontswap_selfshrink()
  xen: Drop un-informative message during boot

Pull arm64 fixes from Will Deacon:
 "I'd been collecting these whilst we debugged a CPU hotplug failure,
  but we ended up diagnosing that one to tglx, who has taken a fix via
  the -tip tree separately.

  We're seeing some NFS issues that we haven't gotten to the bottom of
  yet, and we've uncovered some issues with our backtracing too so there
  might be another fixes pull before we're done.

  Summary:

   - Ensure we have a guard page after the kernel image in vmalloc

   - Fix incorrect prefetch stride in copy_page

   - Ensure irqs are disabled in die()

   - Fix for event group validation in QCOM L2 PMU driver

   - Fix requesting of PMU IRQs on AMD Seattle

   - Minor cleanups and fixes"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mmu: Place guard page after mapping of kernel image
  drivers/perf: arm_pmu: Request PMU SPIs with IRQF_PER_CPU
  arm64: sysreg: Fix unprotected macro argmuent in write_sysreg
  perf: qcom_l2: fix column exclusion check
  arm64/lib: copy_page: use consistent prefetch stride
  arm64/numa: Drop duplicate message
  perf: Convert to using %pOF instead of full_name
  arm64: Convert to using %pOF instead of full_name
  arm64: traps: disable irq in die()
  arm64: atomics: Remove '&' from '+&' asm constraint in lse atomics
  arm64: uaccess: Remove redundant __force from addr cast in __range_ok

Pull powerpc fixes from Michael Ellerman:
 "The highlight is Ben's patch to work around a host killing bug when
  running KVM guests with the Radix MMU on Power9. See the long change
  log of that commit for more detail.

  And then three fairly minor fixes:

   - fix of_node_put() underflow during reconfig remove, using old DLPAR
     tools.

   - fix recently introduced ld version check with 64-bit LE-only
     toolchain.

   - free the subpage_prot_table correctly, avoiding a memory leak.

  Thanks to: Aneesh Kumar K.V, Benjamin Herrenschmidt, Laurent Vivier"

* tag 'powerpc-4.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm/hash: Free the subpage_prot_table correctly
  powerpc/Makefile: Fix ld version check with 64-bit LE-only toolchain
  powerpc/pseries: Fix of_node_put() underflow during reconfig remove
  powerpc/mm/radix: Workaround prefetch issue with KVM