- 10 Feb, 2022 6 commits
-
-
Miquel Raynal authored
Now that spi_mem_default_supports_op() has access to the static controller capabilities (relating to memory operations), and now that these capabilities have been filled by the relevant controllers, there is no need for a specific helper checking only DTR operations, so let's just kill spi_mem_dtr_supports_op() and simply use spi_mem_default_supports_op() instead. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by:
Pratyush Yadav <p.yadav@ti.com> Reviewed-by:
Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/linux-mtd/20220127091808.1043392-6-miquel.raynal@bootlin.com
-
Miquel Raynal authored
This controller has DTR support, so advertize it with a capability now that the spi-controller structure contains this new field. This will later be used by the core to discriminate whether an operation is supported or not, in a more generic way than having different helpers. Signed-off-by:
Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/linux-mtd/20220127091808.1043392-5-miquel.raynal@bootlin.com
-
Miquel Raynal authored
This controller has DTR support, so advertize it with a capability now that the spi-controller structure contains this new field. This will later be used by the core to discriminate whether an operation is supported or not, in a more generic way than having different helpers. Signed-off-by:
-
Miquel Raynal authored
Controllers can now provide a spi-mem capabilities structure. Let's make use of it in spi_mem_controller_default_supports_op(). As we want to check for DTR operations as well as normal operations in a single helper, let's pull the necessary checks from spi_mem_dtr_supports_op() for now. However, because no controller provide these extra capabilities, this change has no effect so far. Signed-off-by:
-
Miquel Raynal authored
Create a spi_controller_mem_caps structure and put it within the spi_controller structure close to the spi_controller_mem_ops strucure. So far the only field in this structure is the support for dtr operations, but soon we will add another parameter. Also create a helper to parse the capabilities and check if the requested capability has been set or not. Signed-off-by:
-
Miquel Raynal authored
Introduce the support for another possible configuration: the ECC engine may work as DMA master (pipelined) and move itself the data to/from the NAND chip into the buffer, applying the necessary corrections/computations on the fly. This driver offers an ECC engine implementation that must be instatiated from a SPI controller driver. Signed-off-by:
-
- 09 Feb, 2022 2 commits
-
-
Miquel Raynal authored
In a pipelined engine situation, we might either have the host which internally has support for error correction, or have it using an external hardware block for this purpose. In the former case, the host is also the ECC engine. In the latter case, it is not. In order to get the right pointers on the right devices (for example: in order to devm_* allocate variables), let's introduce this helper which can safely be called by pipelined ECC engines in order to retrieve the right device structure. Signed-off-by:
-
Miquel Raynal authored
Some SPI-NAND chips do not support on-die ECC. For these chips, correction must apply on the SPI controller end. In order to avoid doing all the calculations by software, Macronix provides a specific engine that can offload the intensive work. Add Macronix ECC engine support, this engine can work in conjunction with a SPI controller and a raw NAND controller, it can be pipelined or external and supports linear and syndrome layouts. Right now the simplest configuration is supported: SPI controller external and linear ECC engine. Signed-off-by:
-
- 23 Jan, 2022 19 commits
-
-
Miquel Raynal authored
Introduce nand_to_ecc_ctx() which will allow to easily jump to the private pointer of an ECC context given a NAND device. This is very handy, from the prepare or finish ECC hook, to get the internal context out of the NAND device object. Signed-off-by:
-
Miquel Raynal authored
Add the necessary helpers to register/unregister hardware ECC engines that will be called from ECC engine drivers. Also add helpers to get the right engine from the user perspective. Keep a reference of the in use ECC engine in order to prevent modules to be unloaded. Put the reference when the engine gets retired. A static list of hardware (only) ECC engines is setup to keep track of the registered engines. Signed-off-by:
-
Mason Yang authored
Macronix SPI-NAND chips might benefit from an external ECC engine. Such an engine might need to access random columns, thus needing to use random commands (0x84 instead of 0x02). Signed-off-by:
Mason Yang <masonccyang@mxic.com.tw> Signed-off-by:
-
Miquel Raynal authored
Describe Macronix NAND ECC engine. This engine may be used as an external engine or can be pipelined with either a raw NAND controller or a SPI controller. Both hardware designs with a SPI controller are shown in the examples. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/linux-mtd/20211216111654.238086-11-miquel.raynal@bootlin.com
-
Miquel Raynal authored
This SPI controller supports interacting with an external ECC engine. The nand-ecc-engine property already exist in the NAND world but also applies to SPI controller nodes which have external correction capabilities like Macronix's. Signed-off-by:
-
Miquel Raynal authored
Straightforward conversion from regular text to yaml schema of the Macronix SPI controller DT bindings. Signed-off-by:
-
Miquel Raynal authored
The interrupt property is not mandatory at all, this property should not be part of the required properties list, so move it into the optional properties list. Fixes: 326e5c8d ("dt-binding: spi: Document Macronix controller bindings") Signed-off-by:
-
Miquel Raynal authored
When looking at compatible prefixes, Macronix is sometimes referred as "mxicy": - mxicy,mx25r1635f - mxicy,mx25u6435f - mxicy,mx25v8035f - mxicy,mx25f0a-spi and sometimes as "mxic": - mxic,multi-itfc-v009-nand-controller - mxic,enable-randomizer-otp The oldest prefix that is also the one preferred by Macronix engineers is "mxicy", so document the other one and mark it deprecated. Signed-off-by:
-
Miquel Raynal authored
Let's get rid of spi-nand.txt by converting it to yaml schema. While at converting this file, let's actually pull all the generic properties from nand-chip.yaml which might apply to a SPI-NAND chip. Signed-off-by:
-
Miquel Raynal authored
Move the NAND chip description out of the NAND controller file. Indeed, a subsequent part of the properties supported by a raw NAND chip are also supported by SPI-NAND chips. So let's create a generic NAND chip description which will be pulled by nand-controller.yaml and later by spi-nand.yaml as well. Signed-off-by:
-
Miquel Raynal authored
Harmonize the different properties in this file by: * dropping the non-necessary allOf's * always defining the keywords in the following order: - first the "description" (when relevant), - then the "type"/"$ref" and the other generic keywords ("enum", "default", etc). Signed-off-by: -
Miquel Raynal authored
The controller properties should be in the controller 'parent' node, while properties in the children nodes are specific to the NAND *chip*. This error was already present during the yaml conversion. Fixes: 2d472aba ("mtd: nand: document the NAND controller/NAND chip DT representation") Signed-off-by:
-
Miquel Raynal authored
The reg property of a NAND device always references the chip-selects. The ready/busy lines are described in the nand-rb property. I believe this was a harmless copy/paste error during the conversion to yaml. Fixes: 212e4969 ("dt-bindings: mtd: Add YAML schemas for the generic NAND options") Signed-off-by:
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Fix printing 'phys_addr' in 'perf script'. - Fix failure to add events with 'perf probe' in ppc64 due to not removing leading dot (ppc64 ABIv1). - Fix cpu_map__item() python binding building. - Support event alias in form foo-bar-baz, add pmu-events and parse-event tests for it. - No need to setup affinities when starting a workload or attaching to a pid. - Use path__join() to compose a path instead of ad-hoc snprintf() equivalent. - Override attr->sample_period for non-libpfm4 events. - Use libperf cpumap APIs instead of accessing the internal state directly. - Sync x86 arch prctl headers and files changed by the new set_mempolicy_home_node syscall with the kernel sources. - Remove duplicate include in cpumap.h. - Remove redundant err variable. * tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Remove redundant err variable perf test: Add parse-events test for aliases with hyphens perf test: Add pmu-events test for aliases with hyphens perf parse-events: Support event alias in form foo-bar-baz perf evsel: Override attr->sample_period for non-libpfm4 events perf cpumap: Remove duplicate include in cpumap.h perf cpumap: Migrate to libperf cpumap api perf python: Fix cpu_map__item() building perf script: Fix printing 'phys_addr' failure issue tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall tools headers UAPI: Sync x86 arch prctl headers with the kernel sources perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename) perf evlist: No need to setup affinities when disabling events for pid targets perf evlist: No need to setup affinities when enabling events for pid targets perf stat: No need to setup affinities when starting a workload perf affinity: Allow passing a NULL arg to affinity__cleanup() perf probe: Fix ppc64 'perf probe add events failed' case
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull ftrace fix from Steven Rostedt: "Fix s390 breakage from sorting mcount tables. The latest merge of the tracing tree sorts the mcount table at build time. But s390 appears to do things differently (like always) and replaces the sorted table back to the original unsorted one. As the ftrace algorithm depends on it being sorted, bad things happen when it is not, and s390 experienced those bad things. Add a new config to tell the boot if the mcount table is sorted or not, and allow s390 to opt out of it" * tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix assuming build time sort works for s390
-
Steven Rostedt (Google) authored
To speed up the boot process, as mcount_loc needs to be sorted for ftrace to work properly, sorting it at build time is more efficient than boot up and can save milliseconds of time. Unfortunately, this change broke s390 as it will modify the mcount_loc location after the sorting takes place and will put back the unsorted locations. Since the sorting is skipped at boot up if it is believed that it was sorted at run time, ftrace can crash as its algorithms are dependent on the list being sorted. Add a new config BUILDTIME_MCOUNT_SORT that is set when BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine if sorting should take place at boot up. Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/ Fixes: 72b3942a ("scripts: ftrace - move the sort-processing in ftrace_init") Reported-by:
Sven Schnelle <svens@linux.ibm.com> Tested-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage - Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH - Fix build errors in certs/Makefile * tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH" usr/include/Makefile: add linux/nfc.h to the compile-test coverage
-
git://github.com/norov/linuxLinus Torvalds authored
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
-
- 22 Jan, 2022 13 commits
-
-
Minghao Chi authored
Return value from perf_event__process_tracing_data() directly instead of taking this in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cnSigned-off-by:
CGEL ZTE <cgel.zte@gmail.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
Add a test which allows us to test parsing an event alias with hyphens. Since these events typically do not exist on most host systems, add the alias to the fake pmu. Function perf_pmu__test_parse_init() has terms added to match known test aliases. Signed-off-by:
John Garry <john.garry@huawei.com> Acked-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
Add a test for aliases with hyphens in the name to ensure that the pmu-events tables are as expects. There should be no reason why these sort of aliases would be treated differently, but no harm in checking. Signed-off-by:
-
John Garry authored
Event aliasing for events whose name in the form foo-bar-baz is not supported, while foo-bar, foo_bar_baz, and other combinations are, i.e. two hyphens are not supported. The HiSilicon D06 platform has events in such form: $ ./perf list sdir-home-migrate List of pre-defined events (to be used in -e): uncore hha: sdir-home-migrate [Unit: hisi_sccl,hha] $ sudo ./perf stat -e sdir-home-migrate event syntax error: 'sdir-home-migrate' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event>event selector. use 'perf list' to list available events To support, add an extra PMU event symbol type for "baz", and add a new rule in the bison file. Signed-off-by: -
German Gomez authored
A previous patch preventing "attr->sample_period" values from being overridden in pfm events changed a related behaviour in arm-spe. Before said patch: perf record -c 10000 -e arm_spe_0// -- sleep 1 Would yield an SPE event with period=10000. After the patch, the period in "-c 10000" was being ignored because the arm-spe code initializes sample_period to a non-zero value. This patch restores the previous behaviour for non-libpfm4 events. Fixes: ae5dcc8a (“perf record: Prevent override of attr->sample_period for libpfm4 events”) Reported-by:
Chase Conklin <chase.conklin@arm.com> Signed-off-by:
German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.comSigned-off-by:
-
Lv Ruyi authored
Remove all but the first include of stdbool.h from cpumap.h. Reported-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by:
-
Ian Rogers authored
Switch from directly accessing the perf_cpu_map to using the appropriate libperf API when possible. Using the API simplifies the job of refactoring use of perf_cpu_map. Signed-off-by:
-
Ian Rogers authored
Value should be built as an integer. Switch some uses of perf_cpu_map to use the library API. Fixes: 6d18804b ("perf cpumap: Give CPUs their own type") Signed-off-by:
-
Yao Jin authored
Perf script was failed to print the phys_addr for SPE profiling. One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR attribute set, perf script then exits with error. Now referring to 'addr', use evsel__do_check_stype() to check the type. Before: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field. After: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr 4064384/4064384 ffff802f921be0d0 2f921be0d0 4064384/4064384 ffff802f921be0d0 2f921be0d0 Reviewed-by:
Yao Jin <jinyao5@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.comSigned-off-by:
Wei Li <liwei391@huawei.com> Signed-off-by:
-
Masahiro Yamada authored
Since b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro"), when CONFIG_MODULE_SIG_KEY is empty, signing_key.x509 fails to build: CERT certs/signing_key.x509 Usage: extract-cert <source> <dest> make[1]: *** [certs/Makefile:78: certs/signing_key.x509] Error 2 make: *** [Makefile:1831: certs] Error 2 Pass "" to the first argument of extract-cert to fix the build error. Link: https://lore.kernel.org/linux-kbuild/20220120094606.2skuyb26yjlnu66q@lion.mk-sys.cz/T/#u Fixes: b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro") Reported-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Tested-by:
-
Masahiro Yamada authored
When CONFIG_MODULE_SIG_KEY is PKCS#11 URL (pkcs11:*), signing_key.x509 fails to build: certs/Makefile:77: *** target pattern contains no '%'. Stop. Due to the typo, $(X509_DEP) contains a colon. Fix it. Fixes: b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro") Signed-off-by:
-
Masahiro Yamada authored
This reverts commit cd8c917a. Commit 129ab0d2 ("kbuild: do not quote string values in include/config/auto.conf") provided the final solution. Now reverting the temporary workaround. Signed-off-by:
-
Dmitry V. Levin authored
As linux/nfc.h userspace compilation was finally fixed by commits 79b69a83 ("nfc: uapi: use kernel size_t to fix user-space builds") and 7175f02c ("uapi: fix linux/nfc.h userspace compilation errors"), there is no need to keep the compile-test exception for it in usr/include/Makefile. Signed-off-by:
Dmitry V. Levin <ldv@altlinux.org> Signed-off-by:
-
