- 12 Aug, 2015 10 commits
-
-
Hariprasad Shenai authored
For the tid info, differentiate from which region the TID is allocated from. It can be from TCAM region or HASH region. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hariprasad Shenai authored
Adding more details to sge qinfo for debugging purpose. Signed-off-by:
Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
When a system has multiple ethernet devices and during DHCP request (for using NFS), the system waits only for HZ/2 which is 500mS before switching to another interface for DHCP. There are some routers (Ex: Trendnet routers) which responds to DHCP request at about 560mS. When the system has only one ethernet interface there is no issue as the timeout is 2S and the dev xid doesn't changes and only retries. But when the system has multiple Ethernet like DRA74x with CPSW in dual EMAC mode, the DHCP response is dropped as the dev xid changes while shifting to the next device. So changing inter device timeout to HZ (which is 1S). Signed-off-by:
Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kaixu Xia authored
There are two improvements in this patch: 1. Fix the build warnings; 2. Add function read_trace_pipe() to print the result on the screen; Before this patch, we can get the result through /sys/kernel/de bug/tracing/trace_pipe and get nothing on the screen. By applying this patch, the result can be printed on the screen. $ ./tracex6 ... tracex6-705 [003] d..1 131.428593: : CPU-3 19981414 sshd-683 [000] d..1 131.428727: : CPU-0 221682321 sshd-683 [000] d..1 131.428821: : CPU-0 221808766 sshd-683 [000] d..1 131.428950: : CPU-0 221982984 sshd-683 [000] d..1 131.429045: : CPU-0 222111851 tracex6-705 [003] d..1 131.429168: : CPU-3 20757551 sshd-683 [000] d..1 131.429170: : CPU-0 222281240 sshd-683 [000] d..1 131.429261: : CPU-0 222403340 sshd-683 [000] d..1 131.429378: : CPU-0 222561024 ... Signed-off-by:
Kaixu Xia <xiakaixu@huawei.com> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ron Angeles authored
This BQL implementation is mostly derived from its related driver, alx. Tested on AR8131 (rev c0) [1969:1063]. Saturated a 100mbps link with 5 concurrent runs of netperf. Ping latency dropped from 14ms to 3ms. Signed-off-by:
Ron Angeles <ronangeles@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Schwartzmeyer authored
This enables the use of ethtool --set-channels devname combined N to change the number of vRSS queues. Separate rx, tx, and other parameters are not supported. The maximum is rsscap.num_recv_que. It passes the given value to rndis_filter_device_add through the device_info->num_chn field. If the procedure fails, it attempts to recover to the prior state. If the recovery fails, it logs an error and aborts. Current num_chn is saved and restored when changing the MTU. Signed-off-by:
Andrew Schwartzmeyer <andschwa@microsoft.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Schwartzmeyer authored
Uses device_info->num_chn to pass user provided number of vRSS queues (from ethtool --set-channels) to rndis_filter_device_add. If nonzero and less than the maximum, set net_device->num_chn to the given value; else default to prior algorithm. Always initialize struct device_info to 0, otherwise not all its fields are guaranteed to be 0, which is necessary when checking if num_chn has been purposefully set. Signed-off-by:
Andrew Schwartzmeyer <andschwa@microsoft.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Woojung.Huh@microchip.com authored
Removing BUG_ON() Signed-off-by:
Woojung Huh <woojung.huh@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Woojung.Huh@microchip.com authored
lan78xx.c:2282 tx_complete() warn: variable dereferenced before check 'skb' (see line 2249) lan78xx.c:2885 lan78xx_bh() info: ignoring unreachable code. lan78xx.c:3159 lan78xx_probe() info: ignoring unreachable code. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Woojung Huh <woojung.huh@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Tobias Klauser authored
altera_tse_private->sgdmadesclen is always assigned assigned the same value and never changes during runtime. Remove the struct member and use a new define for sizeof(struct sgdma_descrip) instead. Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 11 Aug, 2015 16 commits
-
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: mv88e6xxx: support switchdev FDB objects This patchset refactors the FDB management in the mv88e6xxx code and adds the glue in DSA to use the switchdev FDB objects. Below is an usage example (ports 0-2 belongs to br0, ports 3-4 belongs to br1): # bridge fdb add 3c:97:0e:11:30:6e dev swp2 # bridge fdb add 3c:97:0e:11:40:78 dev swp3 # bridge fdb add 3c:97:0e:11:50:86 dev swp4 # bridge fdb del 3c:97:0e:11:40:78 dev swp3 # bridge fdb 01:00:5e:00:00:01 dev eth0 self permanent 01:00:5e:00:00:01 dev eth1 self permanent 00:50:d2:10:78:15 dev swp0 master br0 permanent 3c:97:0e:11:30:6e dev swp2 self static 00:50:d2:10:78:15 dev swp3 master br1 permanent 3c:97:0e:11:50:86 dev swp4 self static # cat /sys/kernel/debug/dsa0/atu # DB T/P Vec State Addr # 001 Port 004 e 3c:97:0e:11:30:6e # 004 Port 010 e 3c:97:0e:11:50:86 For the 88E6xxx switches, FIDs 1 to num_ports will be reserved for non-bridged ports and bridge groups, and the remaining will be later used by VLANs. This change is necessary to welcome the support for hardware VLANs (which will follow soon). Changes in v3: - reorder commits to improve bisectability and minimize diffs - add an ndm_state member in switchdev_fdb_obj instead of an is_static boolean - drop the need to convert unsigned char *addr to u8 addr[ETH_ALEN] (it is casted to char pointer anyway) Changes in v2: - remove ndo_bridge_{get,set,del}link from switchdev/DSA glue code - use ether_addr_copy instead of memcpy for MAC addresses - constify MAC address in port_fdb_{add,del} - split the mv88e6xxx code refactoring into several patches ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Implement the switchdev_port_obj_{add,del,dump} functions in DSA to support the SWITCHDEV_OBJ_PORT_FDB objects. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
This patch adds an ndm_state member to the switchdev_obj_fdb structure, in order to support static FDB addresses. Set Rocker ndm_state to NUD_REACHABLE. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by:
Scott Feldman <sfeldma@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Add a low level _mv88e6xxx_atu_getnext function for convenient access to the hardware, and rework the FDB Get Next operation. This will ease the future integration with VLAN IDs. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Add a mv88e6xxx_atu_entry structure and a low level function for the ATU Load operation, and provide FDB add and delete wrappers functions. This implementation handles the eventual trunk mapping. If the related bit is set, then the ATU data register would contain the trunk ID, and not the port vector. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Change the prototype of port_getnext to include a vid parameter. This is necessary to introduce the support for VLAN. Also rename the fdb_{add,del,getnext} function pointers to port_fdb_{add,del,getnext} since they are specific to a given port. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Rename the __mv88e6xxx_{read,write}_addr functions to more explicit _mv88e6xxx_atu_mac_{read,write} functions, which also respect the single underscore convention used in the file (meaning SMI lock must be held). Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
The driver currently manages one FID per port (or bridge group), with a mask of DSA_MAX_PORTS bits, where 0 means that the FID is in use. The Marvell 88E6xxx switches support up to 4094 FIDs (from 1 to 0xfff; FID 0 means that multiple address databases are not being used). This patch changes the fid_mask for an fid_bitmap of 4096 bits. >From now on, FIDs 1 to num_ports are reserved for non-bridged ports and bridge groups (a bridge group gets the FID of its first member). The remaining bits will be reserved for VLAN entries. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Define register GLOBAL_ATU_FID instead of the raw value 0x01. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit f1d5ca43, reversing changes made to 4933d85c. I applied v2 instead of v3. Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kaixu Xia authored
There is a build error that "'struct bpf_array' has no member named 'prog'" on s390. In commit 2a36f0b9 ("bpf: Make the bpf_prog_array_map more generic"), the member 'prog' of struct bpf_array is replaced by 'ptrs'. So this patch fixes it. Fixes: 2a36f0b9 ("bpf: Make the bpf_prog_array_map more generic") Reported-by:
Wu Fengguang <fengguang.wu@intel.com> Signed-off-by:
Kaixu Xia <xiakaixu@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
David Daney says: ==================== net: thunder: Add ACPI support. Change from v1: Drop PHY binding part, use fwnode_property* APIs. The first patch (1/2) rearranges the existing code a little with no functional change to get ready for the second. The second (2/2) does the actual work of adding support to extract the needed information from the ACPI tables. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David Daney authored
Currently there is no way to get the MAC address in a firmware independent manner, so set the MAC address of the device directly from the ACPI tables. The binding agrees with the proposed standard here: http://www.uefi.org/sites/default/files/resources/nic-request-v2.pdf Based on code from: Narinder Dhillon <ndhillon@cavium.com> Tomasz Nowicki <tomasz.nowicki@linaro.org> Robert Richter <rrichter@cavium.com> Signed-off-by:
Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by:
Robert Richter <rrichter@cavium.com> Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Robert Richter authored
Separate DT code in preparation for follow-on ACPI integration. Based on code from: Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by:
Robert Richter <rrichter@cavium.com> Signed-off-by:
David Daney <david.daney@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Atzm Watanabe authored
When too many remotes are bound to an FDB entry, index may not be increased. This problem will be caused on the large scale environment that is based on the unicast default destination, for instance. Signed-off-by:
Atzm Watanabe <atzm@iij.ad.jp> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fabio Estevam authored
Use '%zx' to print size_t format in order to fix the following build warning: drivers/net/ethernet/mellanox/mlxsw/item.h:65:3: warning: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'size_t' [-Wformat=] Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 10 Aug, 2015 14 commits
-
-
yalin wang authored
This change isdn driver, remove reverse_bits() function, use the generic revbit8() function instead. Signed-off-by:
yalin wang <yalin.wang2010@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
Add or remove some tabs so that statements line up correctly. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
When using a cluster of switches, some topologies will have an MDIO bus per switch, not one for the whole cluster. Allow this to be represented in the device tree, by adding an optional mii-bus property at the switch level. The old platform_device method of instantiation supports this already, so only the device tree binding needs extending with an additional optional phandle. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Add register definitions #defines for accessing the EEPROM. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Acked-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Pravin B Shelar says: ==================== GRE: Use flow based tunneling for OVS GRE vport. Following patches make use of new Using GRE tunnel meta data collection feature. This allows us to directly use netdev based GRE tunnel implementation. While doing so I have removed GRE demux API which were targeted for OVS. Most of GRE protocol code is now consolidated in ip_gre module. v5-v4: Fixed Kconfig dependency for vport-gre module. v3-v4: Added interface to ip-gre device to enable meta data collection. While doing this I split second patch into two patches. v2-v3: Add API to create GRE flow based device. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
Support for sharing GREPROTO_CISCO port was added so that OVS gre port and kernel GRE devices can co-exist. After flow-based tunneling patches OVS GRE protocol processing is completely moved to ip_gre module. so there is no need for GRE protocol hook. Following patch consolidates GRE protocol related functions into ip_gre module. Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
Using GRE tunnel meta data collection feature, we can implement OVS GRE vport. This patch removes all of the OVS specific GRE code and make OVS use a ip_gre net_device. Minimal GRE vport is kept to handle compatibility with current userspace application. Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
Following patch create new tunnel flag which enable tunnel metadata collection on given device. Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pravin B Shelar authored
This function will be used in gre and geneve vport implementations. Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Acked-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rick Jones authored
Add an explicit neighbour table overflow message (ratelimited) and statistic to make diagnosing neighbour table overflows tractable in the wild. Diagnosing a neighbour table overflow can be quite difficult in the wild because there is no explicit dmesg logged. Callers to neighbour code seem to use net_dbg_ratelimit when the neighbour call fails which means the "base message" is not emitted and the callback suppressed messages from the ratelimiting can end-up juxtaposed with unrelated messages. Further, a forced garbage collection will increment a stat on each call whether it was successful in freeing-up a table entry or not, so that statistic is only a hint. So, add a net_info_ratelimited message and explicit statistic to the neighbour code. Signed-off-by:
Rick Jones <rick.jones2@hp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nikolay Aleksandrov authored
This patch adds the ability to toggle the vlan filtering support via netlink. Since we're already running with rtnl in .changelink() we don't need to take any additional locks. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Shahed Shaikh says: ==================== qlcnic: enhancements This series adds few enhancements. o Patch from Harish reorders the sequence of header files inclusion, keeping kernel's header files on top. o Firmware introduced a new feature which allows driver to increases the size of firmware dump of iSCSI function which is being collected by NIC driver. o Print buffer address which is holding a firmware dump. o Use vzalloc() instead kzalloc() for allocating large chunk of memory which will avoid potential memory allocation failure. o Add new device ID for 0x8C30 which is a 83xx series based VF function. Please apply this series to net-next. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shahed Shaikh authored
Signed-off-by:
Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shahed Shaikh authored
Driver allocates a large chunk of temporary buffer using kzalloc to copy FW image. As there is no real need of this memory to be physically contiguous, use vzalloc instead. Signed-off-by:
Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-