- 29 Aug, 2021 7 commits
-
-
Christophe JAILLET authored
In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation Only relevant parts are given below. It has been hand modified to use 'dma_set_mask_and_coherent()' instead of 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable. This is less verbose. Finally, the now useless 'dma_mask' variable has been removed. It has been compile tested. @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation Only relevant parts are given below. It has been compile tested. @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/Signed-off-by:
-
Christophe JAILLET authored
In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation Only relevant parts are given below. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
-
Subbaraya Sundeep authored
NPC extraction profile marks layer types NPC_LT_LB_CTAG for CTAG and NPC_LT_LB_STAG_QINQ for STAG after parsing input packet. Those layer types can be used to install ntuple filters using vlan-etype option. Below are the commands and corresponding behavior with this patch in place. > alias nt "ethtool -U eth0 flow-type ether" > nt vlan 5 m 0xf000 action 0 Input packets with outer VLAN id as 5 i.e, stag packets with VLAN id 5 and ctag packets with VLAN id as 5 are hit. > nt vlan-etype 0x8100 action 0 All input ctag packets with any VLAN id are hit. > nt vlan-etype 0x88A8 action 0 All input stag packets with any VLAN id are hit. > nt vlan-etype 0x8100 vlan 5 m 0xf000 action 0 All input ctag packets with VLAN id 5 are hit. > nt vlan-etype 0x88A8 vlan 5 m 0xf000 action 0 All input stag packets with VLAN id 5 are hit. Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
Sunil Goutham <sgoutham@marvell.com> Signed-off-by:
-
Sunil Goutham authored
Fixed inconsistent license text across the RVU admin function driver. Signed-off-by:
-
Sunil Goutham authored
Fixed inconsistent license text across the netdev drivers. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-David S. Miller authored
queue Tony Nguyen says: ==================== 1GbE Intel Wired LAN Driver Updates 2021-08-27 ravindhan Gunasekaran says: This adds support for Credit-based shaper qdisc offload from Traffic Control system. It enables traffic prioritization and bandwidth reservation via the Credit-Based Shaper which is implemented in hardware by i225 controller. Patch 1/3 adds a default cycle-time for TSN mode to be configured. Patch 2/3 helps to separate TSN mode programming on the fly and during reset sequence. It also simplifies handling features flags for various TSN modes supported by i225 in the driver. Patch 3/3 adds support for IEEE802.1Qav(CBS) standard implemented in i225 HW. Two sets of CBS HW shapers are present in i225 and driver enables them in the two high priority queues. ==================== Signed-off-by:
-
- 28 Aug, 2021 19 commits
-
-
David S. Miller authored
Shannon Nelson says: ==================== ionic: queue mgmt updates The first pair of patches help smooth the driver's response when the firmware has gone through a recovery/reboot cycle. The next four patches take care of a couple things seen when changing the interface status. ==================== Signed-off-by: -
Shannon Nelson authored
The queues can be freed in ionic_close(). They need to be recreated after ionic_open(). It doesn't need to replay the whole config. It only needs to create the timestamping queues again. Signed-off-by:
Allen Hubbe <allenbh@pensando.io> Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Move the hwstamp configuration use of queue_lock up a level to simplify use and error handling. Signed-off-by:
-
Shannon Nelson authored
Add the queue configuration lock to ionic_open() and ionic_stop() so that they don't collide with other in parallel queue configuration actions such as MTU changes as can be demonstrated with a tight loop of ifup/change-mtu/ifdown. Signed-off-by:
-
Shannon Nelson authored
Make sure the ctx struct has the new mac address before any save operations happen. Signed-off-by:
-
Shannon Nelson authored
Since the heartbeat check will already have complained about the firmware status, don't bother complaining about the DEVCMD failing. We'll keep the print message but demote it to a debug messages so that we normally no longer see it. Signed-off-by:
-
Shannon Nelson authored
In some cases of fw_down it was called because there was a fw_generation change, and the firmware is already back up. In order to keep the down time to a minimum, don't wait for the next watchdog polling cycle, fire another watchdog off as soon as we can - an out-of-cycle check won't hurt, and may well speed up the recovery. Signed-off-by:
-
David S. Miller authored
Guangbin Huang says: ==================== net: hns3: updates for -next This series includes some updates for the HNS3 ethernet driver. This series includes some optimizations, cleanups and one ==================== Signed-off-by: -
Hao Chen authored
Add some required spaces in comment for cleanup. Signed-off-by:
Hao Chen <chenhao288@hisilicon.com> Signed-off-by:
Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by:
-
Hao Chen authored
Some local variable declarations are no need to add "static", so remove it. Signed-off-by:
-
Guangbin Huang authored
The function hclge_tm_dwrr_cfg() will be called twice in function hclge_ieee_setets() when map_changed is true, the calling flow is hclge_ieee_setets() hclge_map_update() | hclge_tm_schd_setup_hw() | hclge_tm_dwrr_cfg() hclge_notify_init_up() hclge_tm_dwrr_cfg() It is no need to call hclge_tm_dwrr_cfg() twice actually, so just return after calling hclge_notify_init_up(). Signed-off-by: -
Guangbin Huang authored
Currently, function hclge_check_port_speed() uses switch/case statement to get speed bit according to speed. To reuse this part of code and improve code readability and maintainability, add a new function hclge_get_speed_bit() to get speed bit according to map relationship of speed and speed bit defined in array speed_bit_map. Signed-off-by:
-
Guangbin Huang authored
The function hclgevf_parse_capability() will add more if statement in the future, to improve code readability, maintainability and simplicity, refactor this function by using a bit mapping array of IMP capabilities and driver capabilities. Signed-off-by:
-
Guangbin Huang authored
The function hclge_parse_capability() uses too many if statement, and it may add more in the future. To improve code readability, maintainability and simplicity, refactor this function by using a bit mapping array of IMP capabilities and driver capabilities. Signed-off-by:
-
Yufeng Mo authored
Add a trace to get the info of pf responds to the mailbox message of vf. Signed-off-by:
Yufeng Mo <moyufeng@huawei.com> Signed-off-by:
-
Rocco Yue authored
The kernel provides a "/proc/sys/net/ipv6/conf/<iface>/mtu" file, which can temporarily record the mtu value of the last received RA message when the RA mtu value is lower than the interface mtu, but this proc has following limitations: (1) when the interface mtu (/sys/class/net/<iface>/mtu) is updeated, mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) will be updated to the value of interface mtu; (2) mtu6 (/proc/sys/net/ipv6/conf/<iface>/mtu) only affect ipv6 connection, and not affect ipv4. Therefore, when the mtu option is carried in the RA message, there will be a problem that the user sometimes cannot obtain RA mtu value correctly by reading mtu6. After this patch set, if a RA message carries the mtu option, you can send a netlink msg which nlmsg_type is RTM_GETLINK, and then by parsing the attribute of IFLA_INET6_RA_MTU to get the mtu value carried in the RA message received on the inet6 device. In addition, you can also get a link notification when ra_mtu is updated so it doesn't have to poll. In this way, if the MTU values that the device receives from the network in the PCO IPv4 and the RA IPv6 procedures are different, the user can obtain the correct ipv6 ra_mtu value and compare the value of ra_mtu and ipv4 mtu, then the device can use the lower MTU value for both IPv4 and IPv6. Signed-off-by:
Rocco Yue <rocco.yue@mediatek.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20210827150412.9267-1-rocco.yue@mediatek.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== bnxt: add rx discards stats for oom and netpoll Drivers should avoid silently dropping frames. This set adds two stats for previously unaccounted events to bnxt - packets dropped due to allocation failures and packets dropped during emergency ring polling. ==================== Link: https://lore.kernel.org/r/20210827152745.68812-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Count packets dropped due to buffer or skb allocation errors. Report as part of rx_dropped. v2: drop the ethtool -S entry [Vladimir] Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
-
Jakub Kicinski authored
bnxt may discard packets if Rx completions are consumed in an attempt to let netpoll make progress. It should be extremely rare in practice but nonetheless such events should be counted. Since completion ring memory is allocated dynamically use a similar scheme to what is done for HW stats to save them. Report the stats in rx_dropped and per-netdev ethtool counter. Chances that users care which ring dropped are very low. v3: only save the stat to rx_dropped on reset, rx_total_netpoll_discards will now only show drops since last reset, similar to other "total_discard" counters. Reviewed-by:
-
- 27 Aug, 2021 14 commits
-
-
Aravindhan Gunasekaran authored
Implement support for Credit-based shaper(CBS) Qdisc hardware offload mode in the driver. There are two sets of IEEE802.1Qav (CBS) HW logic in i225 controller and this patch supports enabling them in the top two priority TX queues. Driver implemented as recommended by Foxville External Architecture Specification v0.993. Idleslope and Hi-credit are the CBS tunable parameters for i225 NIC, programmed in TQAVCC and TQAVHC registers respectively. In-order for IEEE802.1Qav (CBS) algorithm to work as intended and provide BW reservation CBS should be enabled in highest priority queue first. If we enable CBS on any of low priority queues, the traffic in high priority queue does not allow low priority queue to be selected for transmission and bandwidth reservation is not guaranteed. Signed-off-by:
Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Signed-off-by:
Mallikarjuna Chilakala <mallikarjuna.chilakala@intel.com> Tested-by:
Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Vinicius Costa Gomes authored
Separates the procedure done during reset from applying a configuration, knowing when the code is executing allow us to separate the better what changes the hardware state from what changes only the driver state. Introduces a flag for bookkeeping the driver state of TSN features. When Qav and frame-preemption is also implemented this flag makes it easier to keep track on whether a TSN feature driver state is enabled or not though controller state changes, say, during a reset. Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by:
-
Vinicius Costa Gomes authored
Sets default values for each queue cycle start and cycle end. This allows some simplification in the handling of these configurations as most TSN features in i225 require a cycle to be configured. In i225, cycle start and end time is required to be programmed for CBS to work properly. Signed-off-by:
-
Johannes Berg authored
The API changes were propagated to most drivers, but clearly arch/um/drivers/ was missed, perhaps due to looking only at the drivers/ folder. Fix that. Fixes: f3ccfda1 ("ethtool: extend coalesce setting uAPI with CQE mode") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20210827094759.f3ab06684bd0.I985181cc00fe017cfe6413d9e1bb720cbe852e6d@changeidSigned-off-by:
-
Harman Kalra authored
Enhancing the mailbox scope to support important configurations like enabling scheduled LMTST, disable LMTLINE prefetch, disable early completion for ordered LMTST, as per request from the application. On FLR these configurations will be reset to default. This patch also adds the 95XXO silicon version to octeontx2 silicon list. Signed-off-by:
Harman Kalra <hkalra@marvell.com> Signed-off-by:
Geetha sowjanya <gakula@marvell.com> Signed-off-by:
-
Pali Rohár authored
Armada 3700 does not support RXAUI, XFI and neither SFI. Remove unused macros for these unsupported modes. Signed-off-by:
Pali Rohár <pali@kernel.org> Fixes: 9695375a ("phy: add A3700 COMPHY support") Signed-off-by:
-
Pali Rohár authored
Comphy phy mode 0x3 is incorrectly named. It is not SGMII but rather 2500Base-X mode which runs at 3.125 Gbps speed. Rename macro names and comments to 2500Base-X. Signed-off-by:
-
Pali Rohár authored
Comphy phy mode 0x3 is incorrectly named. It is not SGMII but rather 2500Base-X mode which runs at 3.125 Gbps speed. Rename macro names and comments to 2500Base-X. Signed-off-by:
-
David S. Miller authored
Guangbin Huang says: ==================== net: hns3: add some cleanups This series includes some cleanups for the HNS3 ethernet driver. ==================== Signed-off-by: -
Hao Chen authored
The parameter cmd in function definition of hns3_dbg_bd_file_init and hns3_dbg_common_file_init is used type u32, this patch uniforms them in function declaration to type u32 too. Signed-off-by:
-
Peng Li authored
There are some repetitive macros have same meaning and value, this patch merges them to make code clean. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Peng Li authored
This patch packages two new function to simplify the function hclgevf_mbx_handler, and it can reduce the code cycle complexity and make code more concise. Signed-off-by:
-
Peng Li authored
The param msg_q is redundant, copy &req->msg to hdev->arq.msg_q[hdev->arq.tail] directly makes code clean. So removes the redundant param msg_q. Signed-off-by:
-
Peng Li authored
Use memcpy to copy req->msg.resp_data to resp->additional_info, to simplify the code and improve a little efficiency. Signed-off-by:
-
