- 02 Jun, 2021 35 commits
-
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/mfd/twl-core.c:496: warning: expecting prototype for twl_regcache_bypass(). Prototype was for twl_set_regcache_bypass() instead Cc: Tony Lindgren <tony@atomide.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Kai Svahn <kai.svahn@nokia.com> Cc: syed khasim <x0khasim@ti.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/mfd/wm831x-core.c:121: warning: expecting prototype for wm831x_reg_unlock(). Prototype was for wm831x_reg_lock() instead Cc: Lee Jones <lee.jones@linaro.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: patches@opensource.cirrus.com Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
This reverts commit 58d91f1c. This is a duplicate. Reported-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Marc Zyngier authored
This driver include linux/irqdomain.h via a bizarre set of indirection, which we are about to break. Directly include the required file. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Andre Przywara authored
Currently the AXP chip requires to have its IRQ line connected to some interrupt controller, and will fail probing when this is not the case. On a new Allwinner SoC (H616) there is no NMI pin anymore, and at least one board does not connect the AXP's IRQ pin to anything else, so the interrupt functionality of the AXP chip is simply not available. Check whether the interrupt line number returned by the platform code is valid, before trying to register the irqchip. If not, we skip this registration, to avoid the driver to bail out completely. Also we need to skip the power key functionality, as this relies on a valid IRQ as well. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Gene Chen authored
Merge different sub-devices I2C read/write functions into one Regmap, because PMIC and LDO part need CRC bits for access protection. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Gene Chen authored
Merge header file into driver and remove unuse register define Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Gene Chen authored
Fix flow which is used to check ic exist. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Gene Chen authored
Remove handle_post_irq which is used to retrigger IRQ. Set IRQ level low trigger in dtsi to keep IRQ always be handled. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Gene Chen authored
Rename mt6360_pmu by mt6360, because of including not only PMU part, but also entire MT6360 IC Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Gene Chen authored
Rename mt6360_pmu_data by mt6360_ddata because of including not only PMU part, but also entire MT6360 IC. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Gene Chen authored
Combine mt6360 pmic/ldo resources into mt6360 regulator resources to simplify the similar resources object. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Gene Chen authored
Indicate sub-dev compatible name by using "-". Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Gene Chen authored
Remove redundant brackets around raw numbers. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Gene Chen authored
Rearrange include file without sorting by alphabet. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
ChiYuan Huang authored
Adds DT binding document for Richtek RT4831. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
ChiYuan Huang authored
This adds support Richtek RT4831 core. It includes four channel WLED driver and Display Bias Voltage outputs. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
ChiYuan Huang authored
Adds DT binding document for Richtek RT4831 backlight. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Andreas Kemnade authored
During more massive generation of interrupts, the IRQ got stuck, and the subdevices did not see any new interrupts. That happens especially at wonky USB supply in combination with ADC reads. To fix that trigger the IRQ at level low instead of falling edge. Fixes: 0c816045 ("mfd: rn5t618: Add IRQ support") Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Tian Tao authored
This change is just to simplify the code, no actual functional changes. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Ikjoon Jang authored
This is for ChromeOS tablets which have a 'cros_cbas' switch device in the "Whiskers" base board. This device can be instantiated only by device tree on ARM platforms. ChromeOS EC doesn't provide a way to probe the device. Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Luca Ceresoli authored
Optionally handle the NRST pin (active low reset) in order to start from a known state during boot and to shut down the chip when rebooting. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Zou Wei authored
This patch adds/modifies MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Limeng authored
The commit 529a1101("mfd: syscon: Don't free allocated name for regmap_config") doesn't free the allocated name field of struct regmap_config, but introduce a memory leak. There is another commit 94cc89eb("regmap: debugfs: Fix handling of name string for debugfs init delays") fixing this debugfs init issue from root cause. With this fixing, the name field in struct regmap_debugfs_node is removed. When initialize debugfs for syscon driver, the name field of struct regmap_config is not used anymore. So, the allocated name field of struct regmap_config is need to be freed directly after regmap initialization to avoid memory leak. Cc: stable@vger.kernel.org Fixes: 529a1101("mfd: syscon: Don't free allocated name for regmap_config") Signed-off-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Andy Shevchenko authored
Currently the software node is removed in error case and at ->remove() stage unconditionally, that ruins the symmetry. Besides, in some cases, when mfd_add_device() fails, the device_remove_software_node() call may lead to NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 00000000 ... EIP: strlen+0x12/0x20 ... kernfs_name_hash+0x13/0x70 kernfs_find_ns+0x32/0xc0 kernfs_remove_by_name_ns+0x2a/0x90 sysfs_remove_link+0x16/0x30 software_node_notify.cold+0x34/0x6b device_remove_software_node+0x5a/0x90 mfd_add_device.cold+0x30a/0x427 Fix all these by guarding device_remove_software_node() with a conditional and locating it at the right place. Fixes: 42e59982 ("mfd: core: Add support for software nodes") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Srinivas Kandagatla authored
WCD934x supports Multi Button Headset control which enable headset detection along with headset button detection. This patch adds interrupts required for MBHC functionality. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Srinivas Kandagatla authored
Currently only two interrupts supported is added in wcd934x interrupt controller, however if we are adding more interrupts the file will become too much unreadable. So add a macro to make adding new interrupts easy and also convert existing slim and soundwire interrupts to use it. This is in preparation to enable Multi Button Headset Control support on this codec. WCD934x supports Multi Button Headset control which enable headset detection along with headset button detection. This patch adds interrupts required for MBHC functionality. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Jian Dong authored
Fix two typos retured --> returned Signed-off-by: Jian Dong <dongjian@yulong.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Mattijs Korpershoek authored
Add compatible strings and interrupts for pmic keys which serves as child device of MFD. MT6358 has two interrupts per key: one for press, another one for release (_R) Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Mattijs Korpershoek authored
Some pmics of the mt6397 family (such as MT6358), have two IRQs per physical key: one for press event, another for release event. The mtk-pmic-keys driver assumes that each key only has one IRQ. The key index and the RES_IRQ resource index have a 1/1 mapping. This won't work for MT6358, as we have multiple resources (2) for one key. To prepare mtk-pmic-keys to support MT6358, retrieve IRQs by name instead of by index. Note: The keys_resources are not part of the device-tree bindings so this won't break any DT schemas. Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Mattijs Korpershoek authored
To support power/home key detection, add definitions for two more MT6358 PMIC registers: - TOPSTATUS: homekey and powerkey debounce status - TOP_RST_MISC: controls homekey,powerkey long press reset time Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Randy Dunlap authored
MFD_MP2629 should select MFD_CORE to a prevent build error: ERROR: modpost: "devm_mfd_add_devices" [drivers/mfd/mp2629.ko] undefined! Fixes: 06081646 ("mfd: mp2629: Add support for mps battery charger") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Andy Shevchenko authored
Add Intel Alder Lake-M LPSS PCI IDs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Lee Jones authored
Merge tags 'tb-mfd-asoc-v5.14-1', 'tb-mfd-gpio-regulator-v5.14' and 'tb-mfd-regulator-rtc-v5.14' into ibs-for-mfd-merged Immutable branch between MFD and ASoC due for the v5.14 merge window Immutable branch between MFD, GPIO and Regulator due for the v5.14 merge window Immutable branch between MFD, Regulator and RTC due for the v5.14 merge window
-
Chris Morgan authored
The return value of snd_soc_component_write() is stored but not evaluated and this results in a warning when W=1 is set. Stop storing the return value to be consistent with all other calls of snd_soc_component_write() and to remove the warning. Fixes: 0d6a04da ("ASoC: Add Rockchip rk817 audio CODEC support") Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
- 01 Jun, 2021 5 commits
-
-
Hsin-Hsiung Wang authored
The MT6359P is a eco version for MT6359 regulator. We add support based on MT6359 regulator driver. Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Wen Su authored
The MT6359 is a regulator found on boards based on MediaTek MT6779 and probably other SoCs. It is a so called pmic and connects as a slave to SoC using SPI, wrapped inside the pmic-wrapper. Signed-off-by: Wen Su <wen.su@mediatek.com> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Hsin-Hsiung Wang authored
This adds support for the MediaTek MT6359 PMIC. This is a multifunction device with the following sub modules: - Codec - Interrupt - Regulator - RTC It is interfaced to the host controller using SPI interface by a proprietary hardware called PMIC wrapper or pwrap. MT6359 MFD is a child device of the pwrap. Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Hsin-Hsiung Wang authored
add dt-binding document for MediaTek MT6359 PMIC Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-
Hsin-Hsiung Wang authored
This adds compatible for the MediaTek MT6359 PMIC. Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
-