- 14 Jul, 2022 2 commits
-
-
Hariprasad Kelam authored
Set the maximum time firmware should poll for a link. If not set firmware could block CPU for a long time resulting in mailbox failures. If link doesn't come up within 1second, firmware will anyway notify the status as and when LINK comes up Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
Geetha Sowjanya <gakula@marvell.com> Link: https://lore.kernel.org/r/20220712161815.12621-1-gakula@marvell.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Michael Walle authored
The PN7160 supports error notifications. Add the appropriate callbacks. Signed-off-by:
Michael Walle <michael@walle.cc> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220712170011.2990629-1-michael@walle.ccSigned-off-by:
-
- 13 Jul, 2022 38 commits
-
-
Sebin Sebastian authored
Fix coverity error 'use of uninitialized variable'. err is uninitialized and is returned which can lead to unintended results. err has been replaced with -einval. Coverity issue: 1518921 (uninitialized scalar variable) Signed-off-by:
Sebin Sebastian <mailmesebin00@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jiapeng Chong authored
The include is in line 14 and 23. Remove the duplicate. Fix following checkincludes warning: ./drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c: linux/bitfield.h is included more than once. ./drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_hash.c: rvu_npc_hash.h is included more than once. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by:
-
Zhengchao Shao authored
Return value of unregister_tcf_proto_ops is unused, remove it. Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-next-2022-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== A fairly large set of updates for next, highlights: ath10k * ethernet frame format support rtw89 * TDLS support cfg80211/mac80211 * airtime fairness fixes * EHT support continued, especially in AP mode * initial (and still major) rework for multi-link operation (MLO) from 802.11be/wifi 7 As usual, also many small updates/cleanups/fixes/etc. ==================== Signed-off-by:
-
David S. Miller authored
Michael Walle says: ==================== net: phy: mxl-gpy: version fix and improvements Fix the version reporting which was introduced earlier. The version will not change during runtime, so cache it and save a PHY read on every auto negotiation. Also print the version in a human readable form. ==================== Signed-off-by: -
Michael Walle authored
Now having a major and a minor number, also print the firmware in human readable form "major.minor". Still keep the 4-digit hexadecimal representation because that form is used in the firmware changelog documents. Also, drop the "release" string assuming that most common case, but make it clearer that the user is running a test version. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Michael Walle authored
Align the firmware field name with the reference manual where it is called "major". Signed-off-by:
-
Michael Walle authored
Cache the firmware version during probe. There is no need to read the firmware version on every autonegotiation. Signed-off-by:
-
Michael Walle authored
The commit 09ce6b20 ("net: phy: mxl-gpy: add temperature sensor") will overwrite the return value and the reported version will be wrong. Fix it. Fixes: 09ce6b20 ("net: phy: mxl-gpy: add temperature sensor") Signed-off-by:
-
David Lamparter authored
The IPv6 multicast routing code previously implemented only the dump variant of RTM_GETROUTE. Implement single MFC item retrieval by copying and adapting the respective IPv4 code. Tested against FRRouting's IPv6 PIM stack. Signed-off-by:
David Lamparter <equinox@diac24.net> Reviewed-by:
Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by:
David Ahern <dsahern@kernel.org> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== net: devlink: devl_* cosmetic fixes Hi. This patches just fixes some small cosmetic issues of devl_* related functions which I found on the way. =================== Signed-off-by: -
Jiri Pirko authored
Maintain the same order as it is in devlink.c for function prototypes. The most of the locked variants would very likely soon be removed and the unlocked version would be the only one. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Acked-by:
-
Jiri Pirko authored
As far as the lock helpers exist as the drivers need to work with the devlink->lock mutex, use the helpers internally in devlink.c in order to be consistent. Signed-off-by:
-
Jiri Pirko authored
To be unified with the rest of the code, the unlocked version (devl_*) of function should have the same description in documentation as the locked one. Add the missing documentation. Also, add "Context" annotation for the locked versions where it is missing. Signed-off-by:
-
Hariprasad Kelam authored
In few error cases MAC(CGX/RPM) block is having 0 lmacs. AF driver uses MAC block with lmac pair to get firmware data etc. These commands will fail as there is no LMAC associated with MAC block. This patch skips the probe of these MAC blocks such that AF driver uses correct MAC block and LMAC pair for firmware communication and define new LMAC_AF_ERROR types for command timeout etc. This patch also enables channel back pressure for all LMACs. Signed-off-by:
-
David S. Miller authored
Maksym Glubokiy says: ==================== net: prestera: add support for port range filters This adds support for port-range rules: $ tc qdisc add ... clsact $ tc filter add ... flower ... src_port <PMIN>-<PMAX> ... ==================== Signed-off-by:
Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by:
Maksym Glubokiy <maksym.glubokiy@plvision.eu>
-
Maksym Glubokiy authored
This adds support for port-range rules: $ tc qdisc add ... clsact $ tc filter add ... flower ... src_port <PMIN>-<PMAX> ... Co-developed-by:
-
Maksym Glubokiy authored
So it can be used for port range filter offloading. Co-developed-by:
-
David S. Miller authored
Oleksandr Mazur says: ==================== net: marvell: prestera: add MDB offloading support This patch series adds support for the MDB handling for the marvell Prestera Driver. It's used to propagate IGMP groups registered within the Kernel to the underlying HW (offload registered groups). Features: - define (and implement) main internal MDB-related objects; - define (and implement) main HW APIs for MDB handling; - add MDB handling support for both regular ports as well as Bond interfaces; - Mirrored behavior of Bridge driver upon multicast router appearance (all traffic flooded when there's no mcast router; mcast router receives all mcast traffic, and only group-specific registered mcast traffic is being received by ports who've explicitly joined any group when there's a registered mcast router); - Reworked prestera driver bridge flags (especially multicast) setting - thus making it possible to react over mcast disabled messages properly by offloading this state to the underlying HW (disabling multicast flooding); Limitations: - Not full (partial) IGMPv3 support (due to limited switchdev notification capabilities: MDB events are being propagated only with a single MAC entry, while IGMPv3 has Group-Specific requests and responses); - It's possible that multiple IP groups would receive traffic from other groups, as MDB events are being propagated with a single MAC entry, which makes it possible to map a few IPs over same MAC; Co-developed-by:Yevhen Orlov <yevhen.orlov@plvision.eu> Signed-off-by:
Oleksandr Mazur <oleksandr.mazur@plvision.eu> PATCH V5: - fix checkpatch errors (4/4). - remove function forward declarations, and move function implementations to match the removed forward declarations (4/4). - rebased changes on top of latest master. PATCH V4: - fix clang warning - var uninitialized when used. PATCH V3: - add missing function implementations to 2/4 (HW API implementation), only definitions were added int V1, V2, and implementation waas missed by mistake. Reported-by:
kernel test robot <lkp@intel.com> - fix compiletime warning (unused variable) PATCH V2: - include all the patches of patch series (V1's been sent to closed net-next, also had not all patches included); ==================== Signed-off-by:
-
Oleksandr Mazur authored
Define bridge MDB entry (software entry): - entry that get's created upon receiving MDB management events (create/delete), that inherently defines a software entry, which can be enabled (offloaded to the HW) or disabled (removed from HW). This separation is done to achieve a better highlevel management of HW resources - software MDB entry could exist, while it's not necessarily should be configured on the HW. For example: by default, the Linux behavior would not replicate multicast traffic to multicast group members if there's no active multicast router and thus - no actual multicast traffic can be received/sent. So, until multicast router appears on the system no HW configuration should be applied, although SW MDB entries should be tracked. Another example would be altering state of 'multicast enabled' on the bridge: MC_DISABLED should invoke disabling / clearing multicast groups of specified bridge on the HW, yet upon receiving 'multicast enabled' event, driver should reconfigure any existing software MDB groups on the HW. Keeping track of software MDB entries in such way makes it possible to properly react on such events. Define bridge MDB port entry (software entry): - entry that helps keeping track (on software - driver - level) of which bridge mebemer interface joined any give MDB group; Co-developed-by: -
Oleksandr Mazur authored
net: marvell: prestera: define and implement MDB / flood domain API for entries creation and deletion Define and implement prestera API calls for managing MDB and flood domain (ports) entries (create / delete / find calls). Co-developed-by:
-
Oleksandr Mazur authored
Define MDB entry that can be offloaded: - FDB entry, that defines an multicast group to which traffic can be replicated to; Define flood domain: - Arrangement of ports (list), that have joined multicast group, which would receive and replicate to multicast traffic of specified group; Define flood domain port: - single flood domain list entry, that is associated with any given bridge port interface (could be LAG interface or physical port-member). Applicable to both Q and D bridges; Co-developed-by: -
Oleksandr Mazur authored
Separate flags to make it possible to alter them separately; Move bridge flags setting logic from HW API level to prestera_main where it belongs; Move bridge flags parsing (and setting using prestera API) to prestera_switchdev.c - module responsible for bridge operations handling; Signed-off-by:
-
Matthias May authored
The current code allows to inherit the TTL (hop_limit) from the payload when skb->protocol is ETH_P_IP or ETH_P_IPV6. However when the payload is VLAN encapsulated (e.g because the tunnel is of type GRETAP), then this inheriting does not work, because the visible skb->protocol is of type ETH_P_8021Q or ETH_P_8021AD. Instead of skb->protocol, use skb_protocol(). Signed-off-by:
Matthias May <matthias.may@westermo.com> Signed-off-by:
-
Matthias May authored
When the payload is a VLAN encapsulated IPv6/IPv6 frame, we can skip the 802.1q/802.1ad ethertypes and jump to the actual protocol. This way we treat IPv4/IPv6 frames as IP instead of as "other". Signed-off-by:
-
Matthias May authored
The current code always forces a dscp of 0 for all non-IP frames. However when setting a specific TOS with the command ip link add name tep0 type ip6gretap local fdd1:ced0:5d88:3fce::1 remote fdd1:ced0:5d88:3fce::2 tos 0xa0 one would expect all GRE encapsulated frames to have a TOS of 0xA0. and not only when the payload is IPv4/IPv6. Signed-off-by:
-
Matthias May authored
The current code allows to inherit the TOS, TTL, DF from the payload when skb->protocol is ETH_P_IP or ETH_P_IPV6. However when the payload is VLAN encapsulated (e.g because the tunnel is of type GRETAP), then this inheriting does not work, because the visible skb->protocol is of type ETH_P_8021Q or ETH_P_8021AD. Instead of skb->protocol, use skb_protocol(). Signed-off-by:
-
Justin Stitt authored
When building with Clang we encounter these warnings: | drivers/net/ethernet/qlogic/qed/qed_dev.c:416:30: error: format | specifies type 'char' but the argument has type 'u32' (aka 'unsigned | int') [-Werror,-Wformat] i); - | drivers/net/ethernet/qlogic/qed/qed_dev.c:630:13: error: format | specifies type 'char' but the argument has type 'int' [-Werror,-Wformat] | p_llh_info->num_ppfid - 1); For the first warning, `i` is a u32 which is much wider than the format specifier `%hhd` describes. This results in a loss of bits after 2^7. The second warning involves implicit integer promotion as the resulting type of addition cannot be smaller than an int. example: `` uint8_t a = 4, b = 7; int size = sizeof(a + b - 1); printf("%d\n", size); // output: 4 ``` See more: (https://wiki.sei.cmu.edu/confluence/display/c/INT02-C.+Understand+integer+conversion+rules) "Integer types smaller than int are promoted when an operation is performed on them. If all values of the original type can be represented as an int, the value of the smaller type is converted to an int; otherwise, it is converted to an unsigned int." Link: https://github.com/ClangBuiltLinux/linux/issues/378Signed-off-by:Justin Stitt <justinstitt@google.com> Link: https://lore.kernel.org/r/20220711232404.2189257-1-justinstitt@google.comSigned-off-by:
-
Lorenzo Bianconi authored
Add the capability to map non-linear xdp frames in XDP_TX and ndo_xdp_xmit callback. Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent worker at Intel) Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220711230751.3124415-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Support changes to initial subflow priority This series updates the in-kernel MPTCP path manager to allow changes to subflow priority for the first subflow created for each MPTCP connection (the one created with the MP_CAPABLE handshake). Patches 1 and 2 do some refactoring to simplify the new functionality. Patch 3 introduces the new feature to change the initial subflow priority and send the MP_PRIO header on that subflow. Patch 4 cleans up code related to tracking endpoint ids on the initial subflow. Patch 5 adds a selftest to confirm that subflow priorities are updated as expected. ==================== Link: https://lore.kernel.org/r/20220711191633.80826-1-mathew.j.martineau@linux.intel.comSigned-off-by:
-
Paolo Abeni authored
Add a couple of test-cases covering the newly introduced features - priority update for the MPC subflow. Reviewed-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Paolo Abeni authored
Currently the id accounting for the ID 0 subflow is not correct: at creation time we mark (correctly) as unavailable the endpoint id corresponding the MPC subflow source address, while at subflow removal time set as available the id 0. With this change we track explicitly the endpoint id corresponding to the MPC subflow so that we can mark it as available at removal time. Additionally this allow deleting the initial subflow via the NL PM specifying the corresponding endpoint id. Reviewed-by:
-
Paolo Abeni authored
Any local endpoints configured on the address matching the MPC subflow are currently ignored. Specifically, setting a backup flag on them has no effect on the first subflow, as the MPC handshake can't carry such info. This change refactors the MPC endpoint id accounting to additionally fetch the priority info from the relevant endpoint and eventually trigger the MP_PRIO handshake as needed. As a result, the MPC subflow now switches to backup priority after that the MPTCP socket is fully established, according to the local endpoint configuration. Reviewed-by:
-
Paolo Abeni authored
When looking-up a socket address in the endpoint list, we must prefer port-based matches over address only match. Ensure that port-based endpoints are listed first, using head insertion for them. Additionally be sure that only port-based endpoints carry a non zero port number. Reviewed-by:
-
Paolo Abeni authored
The in-kernel PM has a bit of duplicate code related to ack generation. Create a new helper factoring out the PM-specific needs and use it in a couple of places. As a bonus, mptcp_subflow_send_ack() is not used anymore outside its own compilation unit and can become static. Reviewed-by:
-
XueBing Chen authored
The strlcpy should not be used because it doesn't limit the source length. Preferred is strscpy. Signed-off-by:
XueBing Chen <chenxuebing@jari.cn> Link: https://lore.kernel.org/r/2a08f6c1.e30.181ed8b49ad.Coremail.chenxuebing@jari.cnSigned-off-by:
-
Yonglong Li authored
current code of __tcp_retransmit_skb only check TCP_SKB_CB(skb)->seq in send window, and TCP_SKB_CB(skb)->seq_end maybe out of send window. If receiver has shrunk his window, and skb is out of new window, it should retransmit a smaller portion of the payload. test packetdrill script: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 fcntl(3, F_GETFL) = 0x2 (flags O_RDWR) +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) +0 > S 0:0(0) win 65535 <mss 1460,sackOK,TS val 100 ecr 0,nop,wscale 8> +.05 < S. 0:0(0) ack 1 win 6000 <mss 1000,nop,nop,sackOK> +0 > . 1:1(0) ack 1 +0 write(3, ..., 10000) = 10000 +0 > . 1:2001(2000) ack 1 win 65535 +0 > . 2001:4001(2000) ack 1 win 65535 +0 > . 4001:6001(2000) ack 1 win 65535 +.05 < . 1:1(0) ack 4001 win 1001 and tcpdump show: 192.168.226.67.55 > 192.0.2.1.8080: Flags [.], seq 1:2001, ack 1, win 65535, length 2000 192.168.226.67.55 > 192.0.2.1.8080: Flags [.], seq 2001:4001, ack 1, win 65535, length 2000 192.168.226.67.55 > 192.0.2.1.8080: Flags [P.], seq 4001:5001, ack 1, win 65535, length 1000 192.168.226.67.55 > 192.0.2.1.8080: Flags [.], seq 5001:6001, ack 1, win 65535, length 1000 192.0.2.1.8080 > 192.168.226.67.55: Flags [.], ack 4001, win 1001, length 0 192.168.226.67.55 > 192.0.2.1.8080: Flags [.], seq 5001:6001, ack 1, win 65535, length 1000 192.168.226.67.55 > 192.0.2.1.8080: Flags [P.], seq 4001:5001, ack 1, win 65535, length 1000 when cient retract window to 1001, send window is [4001,5002], but TLP send 5001-6001 packet which is out of send window. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:Yonglong Li <liyonglong@chinatelecom.cn> Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/1657532838-20200-1-git-send-email-liyonglong@chinatelecom.cnSigned-off-by:
-
Diana Wang authored
Add support for TX VLAN ctag insert which may be configured via ethtool. e.g. # ethtool -K $DEV tx-vlan-offload on The NIC supplies VLAN insert information as packet metadata. The fields of this VLAN metadata including vlan_proto and vlan tag. Configuration control bit NFP_NET_CFG_CTRL_TXVLAN_V2 is to signal availability of ctag-insert features of the firmware. NFDK is used to communicate via PCIE to NFP-3800 based NICs while NFD3 is used for other NICs supported by the NFP driver. This features is currently implemented only for NFD3 and this patch adds support for it with NFDK. Signed-off-by:Diana Wang <na.wang@corigine.com> Reviewed-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220711093048.1911698-1-simon.horman@corigine.comSigned-off-by:
-
