- 21 Mar, 2021 8 commits
-
-
Hans de Goede authored
When either the attributes or the password interface is not found, then unregister the 2 wmi drivers again and return -ENODEV from sysman_init(). Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi <Divya_Bharathi@dell.com> Cc: Mario Limonciello <mario.limonciello@dell.com> Reported-by:
Alexander Naumann <alexandernaumann@gmx.de> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210321115901.35072-7-hdegoede@redhat.com
-
Hans de Goede authored
Cleanup sysman_init() error-exit handling: 1. There is no need for the fail_reset_bios and fail_authentication_kset eror-exit cases, these can be handled by release_attributes_data() 2. Rename all the labels from fail_what_failed, to err_what_to_cleanup this is the usual way to name these and avoids the need to rename them when extra steps are added. Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi <Divya_Bharathi@dell.com> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by:
-
Hans de Goede authored
platform/x86: dell-wmi-sysman: Fix release_attributes_data() getting called twice on init_bios_attributes() failure All calls of init_bios_attributes() will result in a goto fail_create_group if they fail, which calls release_attributes_data(). So there is no need to call release_attributes_data() from init_bios_attributes() on failure itself. Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi <Divya_Bharathi@dell.com> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by:
-
Hans de Goede authored
During some of the error-exit paths it is possible that release_attributes_data() will get called multiple times, which results in exit_foo_attributes() getting called multiple times. Make it safe to call exit_foo_attributes() multiple times, avoiding double-free()s in this case. Note that release_attributes_data() really should only be called once during error-exit paths. This will be fixed in a separate patch and it is good to have the exit_foo_attributes() functions modified this way regardless. Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi <Divya_Bharathi@dell.com> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by:
-
Hans de Goede authored
It is possible for release_attributes_data() to get called when the main_dir_kset has not been created yet, move the removal of the bios-reset sysfs attr to under a if (main_dir_kset) check to avoid a NULL pointer deref. Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi <Divya_Bharathi@dell.com> Cc: Mario Limonciello <mario.limonciello@dell.com> Reported-by:
-
Hans de Goede authored
On some system the WMI GUIDs used by dell-wmi-sysman are present but there are no enum type attributes, this causes init_bios_attributes() to return -ENODEV, after which sysman_init() does a "goto fail_create_group" and then calls release_attributes_data(). release_attributes_data() calls kset_unregister(wmi_priv.main_dir_kset); but before this commit it was missing a "wmi_priv.main_dir_kset = NULL;" statement; and after calling release_attributes_data() the sysman_init() error handling does this: if (wmi_priv.main_dir_kset) { kset_unregister(wmi_priv.main_dir_kset); wmi_priv.main_dir_kset = NULL; } Which causes a second kset_unregister(wmi_priv.main_dir_kset), leading to a double-free, which causes a crash. Add the missing "wmi_priv.main_dir_kset = NULL;" statement to release_attributes_data() to fix this double-free crash. Fixes: e8a60aa7 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems") Cc: Divya Bharathi <Divya_Bharathi@dell.com> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: -
Hans de Goede authored
Testing has shown that setting /sys/firmware/acpi/platform_profile to "balanced" when /sys/bus/platform/devices/thinkpad_acpi/dytc_lapmode reports 1, causes dytc_lapmode to get reset to 0 and then it becomes stuck at 0 for aprox. 30 minutes even if the laptop is used on a lap. Disabling CQL (when enabled) before issuing the DYTC_CMD_RESET to get back to balanced mode and re-enabling it afterwards again, like the code already does when switching to low-power / performance mode fixes this. Fixes: c3bfcd4c ("platform/x86: thinkpad_acpi: Add platform profile support") Tested-by:
Mark Pearson <markpearson@lenovo.com> Signed-off-by:
-
Esteve Varela Colominas authored
On many recent ThinkPad laptops, there's a new LED next to the ESC key, that indicates the FnLock status. When the Fn+ESC combo is pressed, FnLock is toggled, which causes the Media Key functionality to change, making it so that the media keys either perform their media key function, or function as an F-key by default. The Fn key can be used the access the alternate function at any time. With the current linux kernel, the LED doens't change state if you press the Fn+ESC key combo. However, the media key functionality *does* change. This is annoying, since the LED will stay on if it was on during bootup, and it makes it hard to keep track what the current state of the FnLock is. This patch calls an ACPI function, that gets the current media key state, when the Fn+ESC key combo is pressed. Through testing it was discovered that this function causes the LED to update correctly to reflect the current state when this function is called. The relevant ACPI calls are the following: \_SB_.PCI0.LPC0.EC0_.HKEY.GMKS: Get media key state, returns 0x603 if the FnLock mode is enabled, and 0x602 if it's disabled. \_SB_.PCI0.LPC0.EC0_.HKEY.SMKS: Set media key state, sending a 1 will enable FnLock mode, and a 0 will disable it. Relevant discussion: https://bugzilla.kernel.org/show_bug.cgi?id=207841 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1881015Signed-off-by:
Esteve Varela Colominas <esteve.varela@gmail.com> Link: https://lore.kernel.org/r/20210315195823.23212-1-esteve.varela@gmail.comSigned-off-by:
-
- 18 Mar, 2021 2 commits
-
-
Mark Pearson authored
Lenovo platforms with DYTC versions earlier than version 5 don't set the lapmode interface correctly, causing issues with thermald on older platforms. Add checking to only create the dytc_lapmode interface for version 5 and later. Fixes: 1ac09656 ("platform/x86: thinkpad_acpi: Add palm sensor support") Signed-off-by:
-
Hans de Goede authored
Immutable branch between MFD and Platform/x86 due for the v5.13 merge window
-
- 17 Mar, 2021 5 commits
-
-
Maximilian Luz authored
The Surface Pro 7+ is essentially a refresh of the Surface Pro 7 with updated hardware and a new WSID identifier. Signed-off-by:
Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20210309162550.302161-1-luzmaximilian@gmail.comSigned-off-by:
-
Wei Yongjun authored
The sparse tool complains as follows: drivers/platform/surface/surface_aggregator_registry.c:355:30: warning: symbol 'ssam_base_hub_group' was not declared. Should it be static? This symbol is not used outside of surface_aggregator_registry.c, so this commit marks it static. Fixes: 797e7856 ("platform/surface: aggregator_registry: Add base device hub") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
-
Maximilian Luz authored
Add documentation for the user-space interface of the Surface DTX (detachment system) driver, used on Microsoft Surface Book series devices. Signed-off-by:
-
Maximilian Luz authored
Add support for native SSAM devices to the DTX driver. This allows support for the Surface Book 3, on which the DTX device is not present in ACPI. Signed-off-by:
-
Maximilian Luz authored
The Microsoft Surface Book series devices consist of a so-called clipboard part (containing the CPU, touchscreen, and primary battery) and a base part (containing keyboard, secondary battery, and optional discrete GPU). These parts can be separated, i.e. the clipboard can be detached and used as tablet. This detachment process is initiated by pressing a button. On the Surface Book 2 and 3 (targeted with this commit), the Surface Aggregator Module (i.e. the embedded controller on those devices) attempts to send a notification to any listening client driver and waits for further instructions (i.e. whether the detachment process should continue or be aborted). If it does not receive a response in a certain time-frame, the detachment process (by default) continues and the clipboard can be physically separated. In other words, (by default and) without a driver, the detachment process takes about 10 seconds to complete. This commit introduces a driver for this detachment system (called DTX). This driver allows a user-space daemon to control and influence the detachment behavior. Specifically, it forwards any detachment requests to user-space, allows user-space to make such requests itself, and allows handling of those requests. Requests can be handled by either aborting, continuing/allowing, or delaying (i.e. resetting the timeout via a heartbeat commend). The user-space API is implemented via the /dev/surface/dtx miscdevice. In addition, user-space can change the default behavior on timeout from allowing detachment to disallowing it, which is useful if the (optional) discrete GPU is in use. Furthermore, this driver allows user-space to receive notifications about the state of the base, specifically when it is physically removed (as opposed to detachment requested), in what manner it is connected (i.e. in reverse-/tent-/studio- or laptop-mode), and what type of base is connected. Based on this information, the driver also provides a simple tablet-mode switch (aliasing all modes without keyboard access, i.e. tablet-mode and studio-mode to its reported tablet-mode). An implementation of such a user-space daemon, allowing configuration of detachment behavior via scripts (e.g. safely unmounting USB devices connected to the base before continuing) can be found at [1]. [1]: https://github.com/linux-surface/surface-dtx-daemonSigned-off-by:
-
- 10 Mar, 2021 2 commits
-
-
David E. Box authored
Adds PMT Telemetry aggregator support for the DG1 graphics PCIe card. The device does not have the DVSEC region in its PCI config space so hard code the discovery table data in the driver. Also requires a fix for DG1 in the Telemetry driver for how the ACCESS_TYPE field is used. Signed-off-by:
David E. Box <david.e.box@linux.intel.com> Reviewed-by:
Lee Jones <lee.jones@linaro.org>
-
David E. Box authored
Some products will be available that have PMT capabilities that are not supported. Remove the warnings in this instance to avoid nuisance messages and confusion. Also return an error code for capabilities that are disabled by quirk to prevent them from keeping the driver loaded if only disabled capabilities are found. Fixes: 4f8217d5 ("mfd: Intel Platform Monitoring Technology support") Signed-off-by:
-
- 08 Mar, 2021 10 commits
-
-
Heikki Krogerus authored
The old device property API (device_add_properties()) is going to be removed. Replacing the it with the software node API equivalent, device_create_managed_software_node(). Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20210304082023.17689-1-heikki.krogerus@linux.intel.comSigned-off-by:
-
Uwe Kleine-König authored
The driver core ignores the return value of struct bus_type::remove() (and so wmi_dev_remove()) because there is only little that can be done. To simplify the quest to make this function return void, let struct wmi_driver::remove() return void, too. All implementers of this callback return 0 already and this way it should be obvious to driver authors that returning an error code is a bad idea. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by:
Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20210301160404.1677064-1-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Rafael J. Wysocki authored
A few x86 platform drivers use ACPI_DEBUG_PRINT() or ACPI_EXCEPTION() for printing messages, but that is questionable, because those macros belong to ACPICA and they should not be used elsewhere. In addition, ACPI_DEBUG_PRINT() requires special enabling to allow it to actually print the message, which is a nuisance, and the _COMPONENT symbol generally needed for that is not defined in any of the files in question. For this reason, replace the ACPI_DEBUG_PRINT() in lg-laptop.c with pr_debug() and the one in xo15-ebook.c with acpi_handle_debug() (with the additional benefit that the source object can be identified more easily after this change). Also drop the ACPI_MODULE_NAME() definitions that are only used by the ACPICA message printing macros from those files and from wmi.c and surfacepro3_button.c (while at it). Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/2074665.VPHYfYaQb6@kreacher [hdegoede@redhat.com: Drop acer-wmi.c chunk, a similar patch was already merged] Signed-off-by:
-
Alban Bedel authored
Like a few other system the Lenovo ThinkPad X1 Tablet Gen 2 miss the HEBC method, which prevent the power button from working. Add a quirk to enable the button array on this system family and fix the power button. Signed-off-by:
Alban Bedel <albeu@free.fr> Tested-by:
Alexander Kobel <a-kobel@a-kobel.de> Link: https://lore.kernel.org/r/20210222141559.3775-1-albeu@free.frSigned-off-by:
-
Elia Devito authored
Implement support for cool, balanced and performance thermal profile Signed-off-by:
Elia Devito <eliadevito@gmail.com> Link: https://lore.kernel.org/r/20210221221339.12395-1-eliadevito@gmail.comReviewed-by:
-
Elia Devito authored
rename "thermal policy" with the more appropriate term "thermal profile" Signed-off-by:
-
Petr Vaněk authored
uses by -> used by Signed-off-by:
Petr Vaněk <arkamar@atlas.cz> Reviewed-by:
Mark Gross <mgross@linux.intel.com> Link: https://lore.kernel.org/r/YCw6zavnfeHRGWgr@arkamSigned-off-by:
-
Hans de Goede authored
The "MELLANOX HARDWARE PLATFORM SUPPORT" is maintained as part of the pdx86 tree. But when Mark and I took over as new pdx86 maintainers the "MELLANOX HARDWARE PLATFORM SUPPORT" MAINTAINERS entry was not updated. Update the entry now. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by:
-
Alexander Kobel authored
Those events occur when a keyboard cover is attached to a ThinkPad X1 Tablet series device. Typically, they are used to switch from normal to tablet mode in userspace; e.g., to offer touch keyboard choices when focus goes to a text box and no keyboard is attached, or to enable autorotation of the display according to the builtin orientation sensor. intel-vtbn already recognizes those events. To avoid sending duplicate events to userspace, they are simply ignored. Thus, this patch only avoids warnings about unknown and unhandled HKEYs 0x4012 and 0x4013. For more information about the background and potential improvements for different types of attachment options, such as the Pico cartridge dock module, see https://lore.kernel.org/platform-driver-x86/38cb8265-1e30-d547-9e12-b4ae290be737@a-kobel.de/Signed-off-by:
-
Maximilian Luz authored
The SSAM_DEFINE_SYNC_REQUEST_x() macros are intended to reduce boiler-plate code for SSAM request definitions by defining a wrapper function for the specified request. The client device variants of those macros, i.e. SSAM_DEFINE_SYNC_REQUEST_CL_x() in particular rely on the multi-device (MD) variants, e.g.: #define SSAM_DEFINE_SYNC_REQUEST_CL_R(name, rtype, spec...) \ SSAM_DEFINE_SYNC_REQUEST_MD_R(__raw_##name, rtype, spec) \ int name(struct ssam_device *sdev, rtype *ret) \ { \ return __raw_##name(sdev->ctrl, sdev->uid.target, \ sdev->uid.instance, ret); \ } This now creates the problem that it is not possible to declare the generated functions static via static SSAM_DEFINE_SYNC_REQUEST_CL_R(...) as this will only apply to the function defined by the multi-device macro, i.e. SSAM_DEFINE_SYNC_REQUEST_MD_R(). Thus compiling with `-Wmissing-prototypes' rightfully complains that there is a 'static' keyword missing. To solve this, make all SSAM_DEFINE_SYNC_REQUEST_x() macros define static functions. Non-client-device macros are also changed for consistency. In general, we expect those functions to be only used locally in the respective drivers for the corresponding interfaces, so having to define a wrapper function to be able to export this should be the odd case out. Reported-by:kernel test robot <lkp@intel.com> Fixes: b78b4982 ("platform/surface: Add platform profile driver") Signed-off-by:
-
- 06 Mar, 2021 11 commits
-
-
Maximilian Luz authored
Add a driver to provide platform profile support on 5th- and later generation Microsoft Surface devices with a Surface System Aggregator Module. On those devices, the platform profile can be used to influence cooling behavior and power consumption. For example, the default 'quiet' profile limits fan noise and in turn sacrifices performance of the discrete GPU found on Surface Books. Its full performance can only be unlocked on the 'performance' profile. Signed-off-by:
-
Maximilian Luz authored
Add HID subsystem (TC=0x15) devices. These devices need to be registered for 7th-generation Surface models. On previous generations, these devices are either provided as platform devices via ACPI (Surface Laptop 1 and 2) or implemented as standard USB device. Signed-off-by:
-
Maximilian Luz authored
Add the detachment system (DTX) SSAM device for the Surface Book 3. This device is accessible under the base (TC=0x11) subsystem. Signed-off-by:
-
Maximilian Luz authored
Add the SSAM platform profile device to the SSAM device registry. This device is accessible under the thermal subsystem (TC=0x03) and needs to be registered for all Surface models. Signed-off-by:
-
Maximilian Luz authored
Add battery subsystem (TC=0x02) devices (battery and AC) to the SSAM device registry. These devices need to be registered for 7th-generation Surface models. On 5th- and 6th-generation models, these devices are handled via the standard ACPI battery/AC interface, which in turn accesses the same SSAM interface via the Surface ACPI Notify (SAN) driver. Signed-off-by:
-
Maximilian Luz authored
The Surface Book 3 has a detachable base part. While the top part (so-called clipboard) contains the CPU, touchscreen, and primary battery, the base contains, among other things, a keyboard, touchpad, and secondary battery. Those devices do not react well to being accessed when the base part is detached and should thus be removed and added in sync with the base. To facilitate this, we introduce a virtual base device hub, which automatically removes or adds the devices registered under it. Signed-off-by:
-
Maximilian Luz authored
The Surface System Aggregator Module (SSAM) subsystem provides various functionalities, which are separated by spreading them across multiple devices and corresponding drivers. Parts of that functionality / some of those devices, however, can (as far as we currently know) not be auto-detected by conventional means. While older (specifically 5th- and 6th-)generation models do advertise most of their functionality via standard platform devices in ACPI, newer generations do not. As we are currently also not aware of any feasible way to query said functionalities dynamically, this poses a problem. There is, however, a device in ACPI that seems to be used by Windows for identifying different Surface models: The Windows Surface Integration Device (WSID). This device seems to have a HID corresponding to the overall set of functionalities SSAM provides for the associated model. This commit introduces a registry providing non-detectable device information via software nodes. In addition, a SSAM platform hub driver is introduced, which takes care of creating and managing the SSAM devices specified in this registry. This approach allows for a hierarchical setup akin to ACPI and is easily extendable, e.g. via firmware node properties. Note that this commit only provides the basis for the platform hub and registry, and does not add any content to it. The registry will be expanded in subsequent commits. Signed-off-by:
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Nothing special here, though Bob's regression fixes for rxe would have made it before the rc cycle had there not been such strong winter weather! - Fix corner cases in the rxe reference counting cleanup that are causing regressions in blktests for SRP - Two kdoc fixes so W=1 is clean - Missing error return in error unwind for mlx5 - Wrong lock type nesting in IB CM" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/rxe: Fix errant WARN_ONCE in rxe_completer() RDMA/rxe: Fix extra deref in rxe_rcv_mcast_pkt() RDMA/rxe: Fix missed IB reference counting in loopback RDMA/uverbs: Fix kernel-doc warning of _uverbs_alloc RDMA/mlx5: Set correct kernel-doc identifier IB/mlx5: Add missing error code RDMA/rxe: Fix missing kconfig dependency on CRYPTO RDMA/cm: Fix IRQ restore in ib_send_cm_sidr_rep -
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc-plugins fixes from Kees Cook: "Tiny gcc-plugin fixes for v5.12-rc2. These issues are small but have been reported a couple times now by static analyzers, so best to get them fixed to reduce the noise. :) - Fix coding style issues (Jason Yan)" * tag 'gcc-plugins-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: latent_entropy: remove unneeded semicolon gcc-plugins: structleak: remove unneeded variable 'ret'
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull pstore fixes from Kees Cook: - Rate-limit ECC warnings (Dmitry Osipenko) - Fix error path check for NULL (Tetsuo Handa) * tag 'pstore-v5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Rate-limit "uncorrectable error in header" message pstore: Fix warning in pstore_kill_sb()
-
- 05 Mar, 2021 2 commits
-
-
Linus Torvalds authored
Merge tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Fix DM verity target's optional Forward Error Correction (FEC) for Reed-Solomon roots that are unaligned to block size" * tag 'for-5.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm verity: fix FEC for RS roots unaligned to block size dm bufio: subtract the number of initial sectors in dm_bufio_get_device_size
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe fixes: - more device quirks (Julian Einwag, Zoltán Böszörményi, Pascal Terjan) - fix a hwmon error return (Daniel Wagner) - fix the keep alive timeout initialization (Martin George) - ensure the model_number can't be changed on a used subsystem (Max Gurtovoy) - rsxx missing -EFAULT on copy_to_user() failure (Dan) - rsxx remove unused linux.h include (Tian) - kill unused RQF_SORTED (Jean) - updated outdated BFQ comments (Joseph) - revert work-around commit for bd_size_lock, since we removed the offending user in this merge window (Damien) * tag 'block-5.12-2021-03-05' of git://git.kernel.dk/linux-block: nvmet: model_number must be immutable once set nvme-fabrics: fix kato initialization nvme-hwmon: Return error code when registration fails nvme-pci: add quirks for Lexar 256GB SSD nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state nvme-pci: mark Seagate Nytro XM1440 as QUIRK_NO_NS_DESC_LIST. rsxx: Return -EFAULT if copy_to_user() fails block/bfq: update comments and default value in docs for fifo_expire rsxx: remove unused including <linux/version.h> block: Drop leftover references to RQF_SORTED block: revert "block: fix bd_size_lock use"
-
