- 25 Jul, 2016 27 commits
-
-
Xin Long authored
This patch makes sctp support ipv6 nonlocal bind by adding sp->inet.freebind and net->ipv6.sysctl.ip_nonlocal_bind check in sctp_v6_available as what sctp did to support ipv4 nonlocal bind (commit cdac4e07). Reported-by:
Shijoe George <spanjikk@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Conflicts: drivers/net/ethernet/intel/i40e/i40e_main.c Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-07-22 This series contains updates to i40e and i40evf. Heinrich Schuchardt found a possible null pointer being dereferenced in i40e_debug_aq(), fixed the issue by doing the variable assignment after we are sure the pointer is not null. Avinash fixed an issue when link was down, we were not showing the correct advertised link modes. Mitch cleans up a useless initializer since the variable is assigned right away. Refactors the receive filter handling to properly track filter adds and deletes so the driver will not lose filters during a reset and up/down cycles. Also added a tracking mechanism so that the driver knows when to enter and leave promiscuous mode. Catherine removes a device id which is not needed (or used). Moves a mutex lock since we need to lock the client list around the i40e_client_release() call to prevent the release from interrupting the client instances while they are being added. Joshua adds Hyper-V specific VF device ids. Amitoj Kaur Chawla cleans up a redundant memset() call before a memcpy(). Stefan Assmann adds the missing link advertise for some x710 NICs. Tushar Dave fixes and issue found on SPARC, where a PF reset clears MAC filters and if a platform-specific MAC address is used, the driver has to explicitly write default MAC address to MAC filters otherwise all incoming traffic destined to the default MAC address will be dropped after reset. ==================== Signed-off-by: -
Daniel Borkmann authored
This patch fixes the __output_custom() routine we currently use with bpf_skb_copy(). I missed that when len is larger than the size of the current handle, we can issue multiple invocations of copy_func, and __output_custom() advances destination but also source buffer by the written amount of bytes. When we have __output_custom(), this is actually wrong since in that case the source buffer points to a non-linear object, in our case an skb, which the copy_func helper is supposed to walk. Therefore, since this is non-linear we thus need to pass the offset into the helper, so that copy_func can use it for extracting the data from the source object. Therefore, adjust the callback signatures properly and pass offset into the skb_header_pointer() invoked from bpf_skb_copy() callback. The __DEFINE_OUTPUT_COPY_BODY() is adjusted to accommodate for two things: i) to pass in whether we should advance source buffer or not; this is a compile-time constant condition, ii) to pass in the offset for __output_custom(), which we do with help of __VA_ARGS__, so everything can stay inlined as is currently. Both changes allow for adapting the __output_* fast-path helpers w/o extra overhead. Fixes: 555c8a86 ("bpf: avoid stack copy and use skb ctx for event output") Fixes: 7e3f977e ("perf, events: add non-linear data support for raw records") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
gcc-4.9 and higher warn about the newly added NSCI code: net/ncsi/ncsi-manage.c: In function 'ncsi_process_next_channel': net/ncsi/ncsi-manage.c:1003:2: error: 'old_state' may be used uninitialized in this function [-Werror=maybe-uninitialized] The warning is a false positive and therefore harmless, but it would be good to avoid it anyway. I have determined that the barrier in the spin_unlock_irqsave() is what confuses gcc to the point that it cannot track whether the variable was unused or not. This rearranges the code in a way that makes it obvious to gcc that old_state is always initialized at the time of use, functionally this should not change anything. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by:
-
David S. Miller authored
Varun Prakash says: ==================== common library for Chelsio drivers. This patch series adds common library module(libcxgb.ko) for Chelsio drivers to remove duplicate code. This series moves common iSCSI DDP Page Pod manager code from cxgb4.ko to libcxgb.ko, earlier this code was used by only cxgbit.ko now it is used by three Chelsio iSCSI drivers cxgb3i, cxgb4i, cxgbit. In future this module will have common connection management and hardware specific code that can be shared by multiple Chelsio drivers(cxgb4, csiostor, iw_cxgb4, cxgb4i, cxgbit). Please review. Thanks -v3 - removed unused module init and exit functions. -v2 - updated CONFIG_CHELSIO_LIB to an invisible option - changed libcxgb.ko module license from GPL to Dual BSD/GPL ==================== Signed-off-by: -
Varun Prakash authored
Fix following sparse warnings warning: symbol 'cxgb3i_ofld_init' was not declared. Should it be static? warning: symbol 'cxgb4i_cplhandlers' was not declared. Should it be static? warning: symbol 'cxgb4i_ofld_init' was not declared. Should it be static? Signed-off-by:
Varun Prakash <varun@chelsio.com> Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Varun Prakash authored
Export cxgbi_ppm_release() to release ppod manager and cxgbi_tagmask_set() to set tag mask, they are used by cxgb3i, cxgb4i and cxgbit. Signed-off-by:
-
Varun Prakash authored
Add iSCSI DDP support in cxgb3i driver using common iSCSI DDP Page Pod Manager. Signed-off-by:
-
Varun Prakash authored
Add iSCSI DDP support in cxgb4i driver using common iSCSI DDP Page Pod Manager. Signed-off-by:
-
Varun Prakash authored
Remove old ddp code from cxgb3i,cxgb4i,libcxgbi. Next two commits adds DDP support using common iSCSI DDP Page Pod Manager. Signed-off-by:
-
Varun Prakash authored
Add common library module(libcxgb.ko) for Chelsio drivers to remove duplicate code. Code for iSCSI DDP Page Pod Manager is moved from cxgb4.ko to libcxgb.ko. Earlier only cxgbit.ko was using this code, now cxgb3i and cxgb4i will also use common Page Pod manager code. In future this module will have common connection management and hardware specific code that can be shared by multiple Chelsio drivers. Signed-off-by:
-
Vivien Didelot authored
Change the ageing_time type in br_set_ageing_time() from u32 to what it is expected to be, i.e. a clock_t. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
Vivien Didelot authored
br_stp_enable_bridge() does take the br->lock spinlock. Fix its wrongly pasted comment and use the same as br_stp_disable_bridge(). Signed-off-by:
-
Ganesh Goudar authored
Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Mark Bloch authored
When using an IPoIB bond currently only active-backup mode is a valid use case and this commit strengthens it. Since commit 2ab82852 ("net/bonding: Enable bonding to enslave netdevices not supporting set_mac_address()") was introduced till 4.7-rc1, IPoIB didn't support the set_mac_address ndo, and hence the fail over mac policy always applied to IPoIB bonds. With the introduction of commit 492a7e67 ("IB/IPoIB: Allow setting the device address"), that doesn't hold and practically IPoIB bonds are broken as of that. To fix it, lets go to fail over mac if the device doesn't support the ndo OR this is IPoIB device. As a by-product, this commit also prevents a stack corruption which occurred when trying to copy 20 bytes (IPoIB) device address to a sockaddr struct that has only 16 bytes of storage. Signed-off-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Acked-by:
Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: implement port mirroring offload This patchset introduces tc matchall classifier and its offload to Spectrum hardware. In combination with mirred action, defined port mirroring setup is offloaded by mlxsw/spectrum driver. The commands used for creating mirror ports: tc qdisc add dev eth25 handle ffff: ingress tc filter add dev eth25 parent ffff: \ matchall skip_sw \ action mirred egress mirror \ dev eth27 tc qdisc add dev eth25 handle 1: root prio tc filter add dev eth25 parent 1: \ matchall skip_sw \ action mirred egress mirror \ dev eth27 These patches contain: - Resource query implementation - Hardware port mirorring support for spectrum. - Definition of the matchall traffic classifier. - General support for hw-offloading for that classifier. - Specific spectrum implementaion for matchall offloading. ==================== Signed-off-by: -
Yotam Gigi authored
This patch offloads port mirroring directives to hw using the matchall TC with action mirror. It includes both the implementation of the ndo_setup_tc function for the spectrum driver and the spectrum hardware offload configuration code. The hardware offload code is basically two new functions which are capable of adding and removing a new mirror ports pair. It is done using the MPAT, MPAR and SBIB registers: - A new Switch-Port Analyzer (SPAN) entry is added using MPAT to the 'to' port. - The 'to' port is bound to the SPAN entry using MPAR register. - In case of egress SPAN, the 'to' port gets a new internal shared buffer using SBIB register. In addition, a new database was added to the mlxsw_sp struct to store all the SPAN entries and their bound ports list. The number of supported SPAN entries is determined by resource query. Signed-off-by:
Yotam Gigi <yotamg@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Yotam Gigi authored
The helper function is_tcf_mirred_mirror helps finding whether an action struct is of type mirred and is configured to be of type mirror. Signed-off-by:
-
Yotam Gigi authored
The MPAR register is used to bind ports to a SPAN entry (which was created using MPAT register) and thus mirror their traffic (ingress / egress) to a different port. Signed-off-by:
-
Yotam Gigi authored
The MPAT register is used to query and configure the Switch Port Analyzer (SPAN) table. This register is used to configure a port as a mirror output port, while after that a mirrored input port can be bound using MPAR register. Signed-off-by:
-
Yotam Gigi authored
The SBIB register configures per port buffer for internal use. This register is used to configure an egress mirror buffer on the egress port which does the mirroring. Signed-off-by:
-
Yotam Gigi authored
Following the work that have been done on offloading classifiers like u32 and flower, now the match-all classifier hw offloading is possible. if the interface supports tc offloading. To control the offloading, two tc flags have been introduced: skip_sw and skip_hw. Typical usage: tc filter add dev eth25 parent ffff: \ matchall skip_sw \ action mirred egress mirror \ dev eth27 Signed-off-by:
-
Jiri Pirko authored
The matchall classifier matches every packet and allows the user to apply actions on it. This filter is very useful in usecases where every packet should be matched, for example, packet mirroring (SPAN) can be setup very easily using that filter. Signed-off-by:
-
Nogah Frankel authored
Add max span resources to resources query. Signed-off-by:
Nogah Frankel <nogahf@mellanox.com> Reviewed-by:
-
Nogah Frankel authored
Add resources query implementation. If exists, query the HW for its builtin resources instead of having them as consts in the code. Signed-off-by:
-
Kristian Evensen authored
The firmware in several ZTE devices (at least the MF823/831/910 modems/mifis) use OS fingerprinting to determine which type of device to export. In addition, these devices export a REST API which can be used to control the type of device. So far, on Linux, the devices have been seen as RNDIS or CDC Ether. When CDC Ether is used, devices of the same type are, as with RNDIS, exported with the same, bogus random MAC address. In addition, the devices (at least on all firmware revisions I have found) use the bogus MAC when sending traffic routed from external networks. And as a final feature, the devices sometimes export the link state incorrectly. There are also references online to several other ZTE devices displaying this behavior, with several different PIDs and MAC addresses. This patch tries to improve the handling of ZTE devices by doing the following: * Create a new driver_info-struct that is used by ZTE devices that do not have an explicit entry in the product table. This struct is the same as the default cdc_ether driver info, but a new bind- and an rx_fixup-function have been added. * In the new bind function, we check if we have read a random MAC from the device. If we have, then we generate a new random MAC address. This will ensure that all devices get a unique MAC. * The rx_fixup-function replaces the destination MAC address in the skb with that of the device. I have not seen a revision of these devices that behaves correctly (i.e., sets the right destination MAC), so I chose not to do any comparison with for example the known, bogus addresses. * The MF823/MF832/MF910 sometimes export cdc carrier on twice on connect (the correct behavior is off then on). Work around this by manually setting carrier to off if an on-notification is received and the NOCARRIER-bit is not set. This change will affect all devices, but it should take care of similar mistakes made by other manufacturers. I tried to think of/look/test for problems/regressions that could be introduced by this behavior, but could not find any. However, my familiarity with this code path is not that great, so there could be something I have overlooked. I have tested this patch with multiple revisions of all three devices, and they behave as expected. In other words, they all got a valid, random MAC, the correct operational state and I can receive/sent traffic without problems. I also tested with some other cdc_ether devices I have and did not find any problems/regressions caused by the two general changes. v3->v4: * Forgot to remove unused variables, sorry about that (thanks David Miller). v2->v3: * I had forgot to remove the random MAC generation from usbnet_cdc_bind() (thanks Oliver). * Rework logic in the ZTE bind-function a bit. v1->v2: * Only generate random MAC for ZTE devices (thanks Oliver Neukum). * Set random MAC and do RX fixup for all ZTE devices that do not have a product-entry, as the bogus MAC have been seen on devices with several different PIDs/MAC addresses. In other words, it seems to be the default behavior of ZTE CDC Ether devices (thanks Lars Melin). Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for net-next, they are: 1) Count pre-established connections as active in "least connection" schedulers such that pre-established connections to avoid overloading backend servers on peak demands, from Michal Kubecek via Simon Horman. 2) Address a race condition when resizing the conntrack table by caching the bucket size when fulling iterating over the hashtable in these three possible scenarios: 1) dump via /proc/net/nf_conntrack, 2) unlinking userspace helper and 3) unlinking custom conntrack timeout. From Liping Zhang. 3) Revisit early_drop() path to perform lockless traversal on conntrack eviction under stress, use del_timer() as synchronization point to avoid two CPUs evicting the same entry, from Florian Westphal. 4) Move NAT hlist_head to nf_conn object, this simplifies the existing NAT extension and it doesn't increase size since recent patches to align nf_conn, from Florian. 5) Use rhashtable for the by-source NAT hashtable, also from Florian. 6) Don't allow --physdev-is-out from OUTPUT chain, just like --physdev-out is not either, from Hangbin Liu. 7) Automagically set on nf_conntrack counters if the user tries to match ct bytes/packets from nftables, from Liping Zhang. 8) Remove possible_net_t fields in nf_tables set objects since we just simply pass the net pointer to the backend set type implementations. 9) Fix possible off-by-one in h323, from Toby DiPasquale. 10) early_drop() may be called from ctnetlink patch, so we must hold rcu read size lock from them too, this amends Florian's patch #3 coming in this batch, from Liping Zhang. 11) Use binary search to validate jump offset in x_tables, this addresses the O(n!) validation that was introduced recently resolve security issues with unpriviledge namespaces, from Florian. 12) Fix reference leak to connlabel in error path of nft_ct, from Zhang. 13) Three updates for nft_log: Fix log prefix leak in error path. Bail out on loglevel larger than debug in nft_log and set on the new NF_LOG_F_COPY_LEN flag when snaplen is specified. Again from Zhang. 14) Allow to filter rule dumps in nf_tables based on table and chain names. 15) Simplify connlabel to always use 128 bits to store labels and get rid of unused function in xt_connlabel, from Florian. 16) Replace set_expect_timeout() by mod_timer() from the h323 conntrack helper, by Gao Feng. 17) Put back x_tables module reference in nft_compat on error, from Liping Zhang. 18) Add a reference count to the x_tables extensions cache in nft_compat, so we can remove them when unused and avoid a crash if the extensions are rmmod, again from Zhang. ==================== Signed-off-by:
-
- 24 Jul, 2016 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Just several instances of overlapping changes. Signed-off-by:
-
- 23 Jul, 2016 12 commits
-
-
Liping Zhang authored
We "cache" the loaded match/target modules and reuse them, but when the modules are removed, we still point to them. Then we may end up with invalid memory references when using iptables-compat to add rules later. Input the following commands will reproduce the kernel crash: # iptables-compat -A INPUT -j LOG # iptables-compat -D INPUT -j LOG # rmmod xt_LOG # iptables-compat -A INPUT -j LOG BUG: unable to handle kernel paging request at ffffffffa05a9010 IP: [<ffffffff813f783e>] strcmp+0xe/0x30 Call Trace: [<ffffffffa05acc43>] nft_target_select_ops+0x83/0x1f0 [nft_compat] [<ffffffffa058a177>] nf_tables_expr_parse+0x147/0x1f0 [nf_tables] [<ffffffffa058e541>] nf_tables_newrule+0x301/0x810 [nf_tables] [<ffffffff8141ca00>] ? nla_parse+0x20/0x100 [<ffffffffa057fa8f>] nfnetlink_rcv+0x33f/0x53d [nfnetlink] [<ffffffffa057f94b>] ? nfnetlink_rcv+0x1fb/0x53d [nfnetlink] [<ffffffff817116b8>] netlink_unicast+0x178/0x220 [<ffffffff81711a5b>] netlink_sendmsg+0x2fb/0x3a0 [<ffffffff816b7fc8>] sock_sendmsg+0x38/0x50 [<ffffffff816b8a7e>] ___sys_sendmsg+0x28e/0x2a0 [<ffffffff816bcb7e>] ? release_sock+0x1e/0xb0 [<ffffffff81804ac5>] ? _raw_spin_unlock_bh+0x35/0x40 [<ffffffff816bcbe2>] ? release_sock+0x82/0xb0 [<ffffffff816b93d4>] __sys_sendmsg+0x54/0x90 [<ffffffff816b9422>] SyS_sendmsg+0x12/0x20 [<ffffffff81805172>] entry_SYSCALL_64_fastpath+0x1a/0xa9 So when nobody use the related match/target module, there's no need to "cache" it. And nft_[match|target]_release are useless anymore, remove them. Signed-off-by:
Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Liping Zhang authored
If the user specify the invalid NFTA_MATCH_INFO/NFTA_TARGET_INFO attr or memory alloc fail, we should call module_put to the related match or target. Otherwise, we cannot remove the module even nobody use it. Signed-off-by:
-
Gao Feng authored
Simplify the code without any side effect. The set_expect_timeout is used to modify the timer expired time. It tries to delete timer, and add it again. So we could use mod_timer directly. Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix memory leak in nftables, from Liping Zhang. 2) Need to check result of vlan_insert_tag() in batman-adv otherwise we risk NULL skb derefs, from Sven Eckelmann. 3) Check for dev_alloc_skb() failures in cfg80211, from Gregory Greenman. 4) Handle properly when we have ppp_unregister_channel() happening in parallel with ppp_connect_channel(), from WANG Cong. 5) Fix DCCP deadlock, from Eric Dumazet. 6) Bail out properly in UDP if sk_filter() truncates the packet to be smaller than even the space that the protocol headers need. From Michal Kubecek. 7) Similarly for rose, dccp, and sctp, from Willem de Bruijn. 8) Make TCP challenge ACKs less predictable, from Eric Dumazet. 9) Fix infinite loop in bgmac_dma_tx_add() from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) packet: propagate sock_cmsg_send() error net/mlx5e: Fix del vxlan port command buffer memset packet: fix second argument of sock_tx_timestamp() net: switchdev: change ageing_time type to clock_t Update maintainer for EHEA driver. net/mlx4_en: Add resilience in low memory systems net/mlx4_en: Move filters cleanup to a proper location sctp: load transport header after sk_filter net/sched/sch_htb: clamp xstats tokens to fit into 32-bit int net: cavium: liquidio: Avoid dma_unmap_single on uninitialized ndata net: nb8800: Fix SKB leak in nb8800_receive() et131x: Fix logical vs bitwise check in et131x_tx_timeout() vlan: use a valid default mtu value for vlan over macsec net: bgmac: Fix infinite loop in bgmac_dma_tx_add() mlxsw: spectrum: Prevent invalid ingress buffer mapping mlxsw: spectrum: Prevent overwrite of DCB capability fields mlxsw: spectrum: Don't emit errors when PFC is disabled mlxsw: spectrum: Indicate support for autonegotiation mlxsw: spectrum: Force link training according to admin state r8152: add MODULE_VERSION ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfsLinus Torvalds authored
Pull overlayfs fixes from Miklos Szeredi: "This contains a fix for a potential crash/corruption issue and another where the suid/sgid bits weren't cleared on write" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: verify upper dentry in ovl_remove_and_whiteout() ovl: Copy up underlying inode's ->i_mode to overlay inode ovl: handle ATTR_KILL*
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "Five fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: pps: do not crash when failed to register tools/vm/slabinfo: fix an unintentional printf testing/radix-tree: fix a macro expansion bug radix-tree: fix radix_tree_iter_retry() for tagged iterators. mm: memcontrol: fix cgroup creation failure after many small jobs
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull intel kabylake drm fixes from Dave Airlie: "As mentioned Intel has gathered all the Kabylake fixes from -next, which we've enabled in 4.7 for the first time, these are pretty much limited in scope to only affects kabylake, which is hw that isn't shipping yet. So I'm mostly okay with it going in now. If we don't land this, it might be a good idea to disable kabylake support in 4.7 before we ship" * tag 'drm-fixes-for-v4.7-rc8-intel-kbl' of git://people.freedesktop.org/~airlied/linux: (28 commits) drm/i915/kbl: Introduce the first official DMC for Kabylake. drm/i915: Introduce Kabypoint PCH for Kabylake H/DT. drm/i915/gen9: implement WaConextSwitchWithConcurrentTLBInvalidate drm/i915/gen9: Add WaFbcHighMemBwCorruptionAvoidance drm/i195/fbc: Add WaFbcNukeOnHostModify drm/i915/gen9: Add WaFbcWakeMemOn drm/i915/gen9: Add WaFbcTurnOffFbcWatermark drm/i915/kbl: Add WaClearSlmSpaceAtContextSwitch drm/i915/gen9: Add WaEnableChickenDCPR drm/i915/kbl: Add WaDisableSbeCacheDispatchPortSharing drm/i915/kbl: Add WaDisableGafsUnitClkGating drm/i915/kbl: Add WaForGAMHang drm/i915: Add WaInsertDummyPushConstP for bxt and kbl drm/i915/kbl: Add WaDisableDynamicCreditSharing drm/i915/kbl: Add WaDisableGamClockGating drm/i915/gen9: Enable must set chicken bits in config0 reg drm/i915/kbl: Add WaDisableLSQCROPERFforOCL drm/i915/kbl: Add WaDisableSDEUnitClockGating drm/i915/kbl: Add WaDisableFenceDestinationToSLM for A0 drm/i915/kbl: Add WaEnableGapsTsvCreditFix ...
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Two i915 regression fixes. Intel have submitted some Kabylake fixes I'll send separately, since this is the first kernel with kabylake support and they don't go much outside that area I think they should be fine" * tag 'drm-fixes-for-v4.7-rc8-intel' of git://people.freedesktop.org/~airlied/linux: drm/i915: add missing condition for committing planes on crtc drm/i915: Treat eDP as always connected, again
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k upddates from Geert Uytterhoeven: - assorted spelling fixes - defconfig updates * tag 'm68k-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/defconfig: Update defconfigs for v4.7-rc2 m68k: Assorted spelling fixes
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "A handful of fixes before final release: Marvell Armada: - One to fix a typo in the devicetree specifying memory ranges for the crypto engine - Two to deal with marking PCI and device-memory as strongly ordered to avoid hardware deadlocks, in particular when enabling above crypto driver. - Compile fix for PM Allwinner: - DT clock fixes to deal with u-boot-enabled framebuffer (simplefb). - Make R8 (C.H.I.P. SoC) inherit system compatibility from A13 to make clocks register proper. Tegra: - Fix SD card voltage setting on the Tegra3 Beaver dev board Misc: - Two maintainers updates for STM32 and STi platforms" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: tegra: beaver: Allow SD card voltage to be changed MAINTAINERS: update STi maintainer list MAINTAINERS: update STM32 maintainers list ARM: mvebu: compile pm code conditionally ARM: dts: sun7i: Fix pll3x2 and pll7x2 not having a parent clock ARM: dts: sunxi: Add pll3 to simplefb nodes clocks lists ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys ARM: mvebu: map PCI I/O regions strongly ordered ARM: mvebu: fix HW I/O coherency related deadlocks ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13 -
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes a sporadic build failure in the qat driver as well as a memory corruption bug in rsa-pkcs1pad" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct crypto: qat - make qat_asym_algs.o depend on asn1 headers
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull key handling fixes from James Morris: "Quoting David Howells: Here are three miscellaneous fixes: (1) Fix a panic in some debugging code in PKCS#7. This can only happen by explicitly inserting a #define DEBUG into the code. (2) Fix the calculation of the digest length in the PE file parser. This causes a failure where there should be a success. (3) Fix the case where an X.509 cert can be added as an asymmetric key to a trusted keyring with no trust restriction if no AKID is supplied. Bugs (1) and (2) aren't particularly problematic, but (3) allows a security check to be bypassed. Happily, this is a recent regression and never made it into a released kernel" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: Fix for erroneous trust of incorrectly signed X.509 certs pefile: Fix the failure of calculation for digest PKCS#7: Fix panic when referring to the empty AKID when DEBUG defined
-
