- 27 Sep, 2023 40 commits
-
-
Laurent Pinchart authored
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
The subdev .s_stream() operation shall not be called to start streaming on an already started subdev, or stop streaming on a stopped subdev. Remove the check that guards against that condition. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
The subdev .s_stream() operation must not be called to start an already started subdev, or stop an already stopped one. This requirement has never been formally documented. Fix it, and catch possible offenders with a WARN_ON() in the call_s_stream() wrapper. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Hao Yao authored
This commit adds support for: - 1364x768 at 120 FPS Signed-off-by: Hao Yao <hao.yao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Fabio Estevam authored
As explained in the description text from trivial-devices.yaml: "This is a list of trivial I2C and SPI devices that have simple device tree bindings, consisting only of a compatible field, an address and possibly an interrupt line." A camera device does not fall into this category as it needs other properties such as regulators, reset and powerdown GPIOs, clocks, media endpoint. Remove the OV5642 entry from trivial-devices.yaml and add its own ovti,ov5642.yaml. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Sakari Ailus authored
CCS tools is a useful set of programs and libraries for working with CCS static data. Do mention that in context of the CCS driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
The streaming flag in the driver private structure is used for the sole purpose of gating register writes when setting a V4L2 control. This is better handled by checking if the sensor is powered up using the runtime PM API. Do so and drop the streaming flag. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
The streaming flag in the driver private structure is used for the sole purpose of gating register writes when setting a V4L2 control. This is better handled by checking if the sensor is powered up using the runtime PM API. Do so and drop the streaming flag. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [Sakari Ailus: Runtime PM put when setting analgue gain.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
The streaming flag in the driver's private structure is set but never used. Drop it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com> Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
Simplify error handling by using pm_runtime_resume_and_get() instead of pm_runtime_get_sync() with a put call in the error path. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> (st-vgxy61) Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Xiaolei Wang authored
sensor->ctrls.handler is initialized in ov5640_init_controls(), so when the sensor is not connected and ov5640_sensor_resume() fails, sensor->ctrls.handler should be released, otherwise a memory leak will be detected: unreferenced object 0xc674ca80 (size 64): comm "swapper/0", pid 1, jiffies 4294938337 (age 204.880s) hex dump (first 32 bytes): 80 55 75 c6 80 54 75 c6 00 55 75 c6 80 52 75 c6 .Uu..Tu..Uu..Ru. 00 53 75 c6 00 00 00 00 00 00 00 00 00 00 00 00 .Su.......... Fixes: 85644a9b ("media: ov5640: Use runtime PM") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Shravan Chippa authored
Add support for the imx334's test pattern generator. By default the test pattern generator is disabled, so add support for enabling and disabling horizontal and vertical colour bars. Signed-off-by: Shravan Chippa <shravan.chippa@microchip.com> Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Biju Das authored
Drop of_match_ptr() from ov7670_driver and get rid of ugly CONFIG_OF if check. This slightly increases the size of ov7670_driver on non-OF system and shouldn't be an issue. Add mod_devicetable.h include. It also allows, in case if needed, to enumerate this device via ACPI with PRP0001 magic. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Biju Das authored
The driver has an OF match table, still, it uses an ID lookup table for retrieving match data. Currently, the driver is working on the assumption that an I2C device registered via OF will always match a legacy I2C device ID. The correct approach is to have an OF device ID table using i2c_get_match_data() if the devices are registered via OF/ID. Unify the OF/ID table by using struct ov7670_devtype as match data for both these tables and replace the ID lookup table for the match data by i2c_get_match_data(). Split the array ov7670_devdata[] as individual variables, and make lines shorter by referring to e.g. &ov7670_devdata instead of &ov7670_devdata[MODEL_OV7670]. Drop enum ov7670_model as there is no user. While at it, remove the trailing comma in the terminator entry for the OF table making code robust against (theoretical) misrebases or other similar things where the new entry goes _after_ the termination without the compiler noticing. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Biju Das authored
Drop of_match_ptr() from mt9v032_driver and get rid of ugly CONFIG_OF if check. This slightly increases the size of mt9v032_driver on non-OF system and shouldn't be an issue. Add mod_devicetable.h include. It also allows, in case if needed, to enumerate this device via ACPI with PRP0001 magic. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Biju Das authored
The driver has an OF match table, still, it uses an ID lookup table for retrieving match data. Currently, the driver is working on the assumption that an I2C device registered via OF will always match a legacy I2C device ID. The correct approach is to have an OF device ID table using i2c_get_match_data() if the devices are registered via OF/ID. Unify the OF/ID table by using mt9v032_model_info as match data for both these tables and replace the ID lookup table for the match data by i2c_get_match_data() and simplifly probe(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Jacopo Mondi authored
Since commit 7d3c7d2a ("media: i2c: Add a camera sensor top level menu") the CONFIG_MEDIA_CONTROLLER and CONFIG_VIDEO_V4L2_SUBDEV_API are selected by the top-level VIDEO_CAMERA_SENSOR menu. Remove all ifdefferies from camera sensor drivers to simplify the code. Compile-tested only. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Biju Das authored
Convert enum->pointer for data in the match tables, so that device_get_match_data() can do match against OF/ACPI/I2C tables, once i2c bus type match support added to it. Replace enum->struct *video_i2c_chip for data in the match table. Simplify the probe() by replacing device_get_match_data() and ID lookup for retrieving data by i2c_get_match_data(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Krzysztof Kozlowski authored
Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Laurent Pinchart authored
Routing support, through the subdev .set_routing() operation, requires the subdev to support streams. This is however not clearly documented anywhere. Fix it by expanding the operation's documentation to indicate that subdevs must set the V4L2_SUBDEV_FL_STREAMS flag. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Umang Jain authored
The imx415 driver uses the subdev active state, there's no need to implement the .get_fmt() operation manually. Use the v4l2_subdev_get_fmt() helper instead. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Christophe JAILLET authored
This is odd to have a of_node_put() just after a for_each_child_of_node() or a for_each_endpoint_of_node() loop. It should already be called during the last iteration. Remove these calls. Fixes: 66d8c9d2 ("media: i2c: Add MAX9286 driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Wentong Wu authored
During probe ivsc ace device, acpi_dev_clear_dependencies() will be called to clear the consumer and supplier relationship between camera sensor device and ivsc device. But IPU bridge will setup the connection swnodes for ivsc device and camera sensor device based on this consumer and supplier relationship. This patch defers ivsc ace's probe to make sure IPU bridge is initialized before this consumer and supplier relationship between camera sensor device and IVSC device is cleared. Signed-off-by: Wentong Wu <wentong.wu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Wentong Wu authored
Remove name identifier to match the device with the defined UUID when load driver module. Signed-off-by: Wentong Wu <wentong.wu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Wentong Wu authored
Remove name identifier to match the device with the defined UUID when load driver module. Signed-off-by: Wentong Wu <wentong.wu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Sakari Ailus authored
The v4l2_pipeline_pm_get() and v4l2_pipeline_pm_put() functions were needed to control sub-devices' power states before runtime PM. These functions should no longer be used, and instead sub-device drivers should use runtime PM. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Ruan Jinjie authored
With devm_clk_get_enabled() the call to clk_disable_unprepare() can be dropped from the error path and the remove callback. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Suhrid Subramaniam authored
Fix documentation for R13 and R33 low bits. Signed-off-by: Suhrid Subramaniam <suhrid.subramaniam@mediatek.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Jean-Michel Hautbois authored
While playing with low resolutions for the grid, it appeared that height_per_slice is not initialised if we are not using both stripes for the calculations. This pattern occurs three times: - for the awb_fr processing block - for the af processing block - for the awb processing block The idea of this small portion of code is to reduce complexity in loading the statistics, it could be done also when only one stripe is used. Fix it by getting this initialisation code outside of the else() test case. Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Tommaso Merciai authored
Switch my mail address from a company mail to a personal one. Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Sakari Ailus authored
Improve the Kconfig help text to convey the ACE is for changing camera sensor ownership and CSI for configuring the CSI-2 rx and tx. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Guoniu.zhou authored
The value of V4L2_CID_VBLANK control is initialized to default vblank value of 640x480 when driver probe. When OV5640 work at DVP mode, the control value won't update and lead to sensor can't output data if the resolution remain the same as last time since incorrect total vertical size. So update it when there is a new value applied. Fixes: bce93b82 ("media: ov5640: Add VBLANK control") Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Dan Carpenter authored
The "ret = " assignment was missing, so ov13b10_power_on() is not checked for errors. Add the assignment. Fixes: 6e28afd1 ("media: ov13b10: add PM control support based on power resources") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Mikhail Rudenko authored
Correct the driver source path specified in the MAINTAINERS file, which was mistakenly set due to an oversight during the driver's initial addition. Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Jinjie Ruan authored
Define EP5_BUF_SIZE and EP5_TIMEOUT_MS macros to make the code more readable. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Suggested-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Jinjie Ruan authored
Use kmemdup() helper instead of open-coding to simplify the code. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
-