Some Coresight devices that kernel don't have permission to access or
configure. For these devices, a dummy driver is needed to register them as
Coresight devices. The module may also be used to define components that
may not have any programming interfaces, so that paths can be created
in the driver. It provides Coresight API for operations on dummy devices,
such as enabling and disabling them. It also provides the Coresight dummy
sink/source paths for debugging.
Signed-off-by: Hao Zhang <quic_hazha@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230602084149.40031-2-quic_hazha@quicinc.com

James has made significant contributions to the CoreSight subsystem
both with code and reviews. Add James to the Reviewer for the subsystem.

Cc: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20230608152045.112349-1-suzuki.poulose@arm.com

Instead of adding the PIDs forever to the list for the new CPUs, let us detect
a component to be ETMv4 based on the CoreSight CID, DEVTYPE=PE_TRACE and
DEVARCH=ETMv4. This is already done for some of the ETMs. We can extend the PID
matching to match the PIDR2:JEDEC, BIT[3], which must be 1 (RAO) always.

Link: https://lkml.kernel.org/r/20230317030501.1811905-1-anshuman.khandual@arm.com
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: frowand.list@gmail.com
Cc: linux@armlinux.org.uk
Cc: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
[ Fixed typo in the description RA0 => RAO ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230605133031.1827626-1-suzuki.poulose@arm.com

etm4_remove_dev() returned zero unconditionally. Make it return void
instead, which makes it clear in the callers that there is no error to
handle. Simplify etm4_remove_platform_dev() accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230518201629.260672-1-u.kleine-koenig@pengutronix.de

The trace ID patchset adjusted the handling of the TRCTRACEIDR register
sysfs to allocate on read.

Although this was initally correct, the final version of the patch series
introduced an error which resulted in the mgmt/trctraceidr file in sysfs
not being visible.

This patch fixes that issue.

Fixes: df487120 ("coresight: etm4x: Update ETM4 driver to use Trace ID API")
Reported-by: Junhao He <hejunhao3@huawei.com>
Link: https://lists.linaro.org/archives/list/coresight@lists.linaro.org/thread/KK3CVVMRHJWVUORKMFJRSXYCEDFKENQJ/Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230512133054.235073-1-mike.leach@linaro.org

The CTI module has some hard coded refcounting code that has a leak.
For example running perf and then trying to unload it fails:

  perf record -e cs_etm// -a -- ls
  rmmod coresight_cti

  rmmod: ERROR: Module coresight_cti is in use

The coresight core already handles references of devices in use, so by
making CTI a normal helper device, we get working refcounting for free.
Reviewed-by: Mike Leach  <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-14-james.clark@arm.com

Currently CATU is the only helper device, and its enable and disable
calls are hard coded. To allow more helper devices to be added in a
generic way, remove these hard coded calls and just enable and disable
all helper devices.

This has to apply to helpers adjacent to the path, because they will
never be in the path. CATU was already discovered in this way, so
there is no change there.

One change that is needed is for CATU to call back into ETR to allocate
the buffer. Because the enable call was previously hard coded, it was
done at a point where the buffer was already allocated, but this is no
longer the case.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-13-james.clark@arm.com

When CATU is moved to the generic enable/disable path system in the
next commit, it will need to call into ETR and get it to pre-allocate
its buffer so add a function for it.

No functional changes
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-12-james.clark@arm.com

This removes the need to do an additional lookup for the total number
of ports used and also removes the need to allocate an array of
refcounts which is just another representation of a connection array.

This was only used for link type devices, for regular devices a single
refcount on the coresight device is used.

There is a both an input and output refcount in case two link type
devices are connected together so that they don't overwrite each other's
counts.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-11-james.clark@arm.com

This will allow CATU to get its associated ETR in a generic way where
currently the enable path has some hard coded searches which avoid
the need to store input connections.

This also means that the full search for connected devices on removal
can be replaced with a loop through only the input and output devices.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-10-james.clark@arm.com

There is some duplication between coresight_fixup_device_conns() and
coresight_fixup_orphan_conns(). They both do the same thing except for
the fact that coresight_fixup_orphan_conns() can't handle iterating over
itself.

By making it able to handle fixing up it's own connections the other
function can be removed.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-9-james.clark@arm.com

This will allow the same connection object to be referenced via the
input connection list in a later commit rather than duplicating them.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-8-james.clark@arm.com

Add a function for adding connections dynamically. This also removes
the 1:1 mapping between port number and the index into the connections
array. The only place this mapping was used was in the warning for
duplicate output ports, which has been replaced by a search. Other
uses of the port number already use the port member variable.

Being able to dynamically add connections will allow other devices like
CTI to re-use the connection mechanism despite not having explicit
connections described in the DT.

The connections array is now no longer sparse, so child_fwnode doesn't
need to be checked as all connections have a target node. Because the
array is no longer sparse, the high in and out port numbers are required
for the refcount arrays. But these will also be removed in a later
commit when the refcount is made a property of the connection.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-7-james.clark@arm.com

When input connections are added they will use the same connection
object as the output so parent and child could be misinterpreted. Making
the direction unambiguous in the names should improve readability.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-6-james.clark@arm.com

Rename to avoid confusion between port number and the index in the
connection array. The port number is already stored in the connection,
and in a later commit the connection array will be appended to, so
the length of it will no longer reflect the number of ports.

No functional changes.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-5-james.clark@arm.com

conns is actually for output connections. Change the name to make it
clearer and so that we can add input connections later.

No functional changes.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-4-james.clark@arm.com

mode is stored as a local_t, but it is also passed around a lot as a
plain u32, so use the correct type wherever local_t isn't currently
used. This helps a little bit with readability.
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-3-james.clark@arm.com

child_fwnode should be a read only property based on the DT or ACPI. If
it's cleared on the parent device when a child is unloaded, then when
the child is loaded again the connection won't be remade.

child_dev should be cleared instead which signifies that the connection
should be remade when the child_fwnode registers a new coresight_device.

Similarly the reference count shouldn't be decremented as long as the
parent device exists. The correct place to drop the reference is in
coresight_release_platform_data() which is already done.

Reproducible on Juno with the following steps:

  # load all coresight modules.
  $ cd /sys/bus/coresight/devices/
  $ echo 1 > tmc_etr0/enable_sink
  $ echo 1 > etm0/enable_source
  # Works fine ^

  $ echo 0 > etm0/enable_source
  $ rmmod coresight-funnel
  $ modprobe coresight-funnel
  $ echo 1 > etm0/enable_source
  -bash: echo: write error: Invalid argument

Fixes: 37ea1ffd ("coresight: Use fwnode handle instead of device names")
Fixes: 2af89eba ("coresight: Clear the connection field properly")
Tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230425143542.2305069-2-james.clark@arm.com

There is no krealloc_array equivalent in devres. Users would have to
do their own multiplication overflow check so provide one.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20230509094942.396150-2-james.clark@arm.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull x86 cpu fix from Thomas Gleixner:
 "A single fix for x86:

   - Prevent a bogus setting for the number of HT siblings, which is
     caused by the CPUID evaluation trainwreck of X86. That recomputes
     the value for each CPU, so the last CPU "wins". That can cause
     completely bogus sibling values"

* tag 'x86-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/topology: Fix erroneous smp_num_siblings on Intel Hybrid platforms

Pull perf fixes from Thomas Gleixner:
 "A small set of perf fixes:

   - Make the MSR-readout based CHA discovery work around broken
     discovery tables in some SPR firmwares.

   - Prevent saving PEBS configuration which has software bits set that
     cause a crash when restored into the relevant MSR"

* tag 'perf-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore: Correct the number of CHAs on SPR
  perf/x86/intel: Save/restore cpuc->active_pebs_data_cfg when using guest PEBS

Pull unwinder fixes from Thomas Gleixner:
 "A set of unwinder and tooling fixes:

   - Ensure that the stack pointer on x86 is aligned again so that the
     unwinder does not read past the end of the stack

   - Discard .note.gnu.property section which has a pointlessly
     different alignment than the other note sections. That confuses
     tooling of all sorts including readelf, libbpf and pahole"

* tag 'objtool-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/show_trace_log_lvl: Ensure stack pointer is aligned, again
  vmlinux.lds.h: Discard .note.gnu.property section

Pull debugobjects fixes from Thomas Gleixner:
 "Two fixes for debugobjects:

   - Prevent the allocation path from waking up kswapd.

     That's a long standing issue due to the GFP_ATOMIC allocation flag.
     As debug objects can be invoked from pretty much any context waking
     kswapd can end up in arbitrary lock chains versus the waitqueue
     lock

   - Correct the explicit lockdep wait-type violation in
     debug_object_fill_pool()"

* tag 'core-debugobjects-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Don't wake up kswapd from fill_pool()
  debugobjects,locking: Annotate debug_object_fill_pool() wait type violation

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for interrupt chip drivers:

   - Prevent loss of state in the MIPS GIC interrupt controller

   - Disable pseudo NMIs on Mediatek based Chromebooks as they have
     firmware issues which cause instantenous chrashes and freezes wen
     pseudo NMIs are used

   - Fix the error handling path in the MBIGEN driver and a defined but
     not used warning in the meson-gpio interrupt chip driver"

* tag 'irq-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mbigen: Unify the error handling in mbigen_of_create_domain()
  irqchip/meson-gpio: Mark OF related data as maybe unused
  irqchip/mips-gic: Use raw spinlock for gic_lock
  irqchip/mips-gic: Don't touch vl_map if a local interrupt is not routable
  irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues
  dt-bindings: interrupt-controller: arm,gic-v3: Add quirk for Mediatek SoCs w/ broken FW

Pull MIPS fixes from Thomas Bogendoerfer:

 - fixes to get alchemy platform back in shape

 - fix for initrd detection

* tag 'mips-fixes_6.4_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  mips: Move initrd_start check after initrd address sanitisation.
  MIPS: Alchemy: fix dbdma2
  MIPS: Restore Au1300 support
  MIPS: unhide PATA_PLATFORM

Pull powerpc fix from Michael Ellerman:

 - Reinstate ARCH_FORCE_MAX_ORDER ranges to fix various breakage

* tag 'powerpc-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Reinstate ARCH_FORCE_MAX_ORDER ranges

Pull xen fixes from Juergen Gross:

 - a double free fix in the Xen pvcalls backend driver

 - a fix for a regression causing the MSI related sysfs entries to not
   being created in Xen PV guests

 - a fix in the Xen blkfront driver for handling insane input data
   better

* tag 'for-linus-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/pci/xen: populate MSI sysfs entries
  xen/pvcalls-back: fix double frees with pvcalls_new_active_socket()
  xen/blkfront: Only check REQ_FUA for writes

Pull char/misc fixes from Greg KH:
 "Here are some small driver fixes for 6.4-rc4. They are just two
  different types:

   - binder fixes and reverts for reported problems and regressions in
     the binder "driver".

   - coresight driver fixes for reported problems.

  All of these have been in linux-next for over a week with no reported
  problems"

* tag 'char-misc-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  binder: fix UAF of alloc->vma in race with munmap()
  binder: add lockless binder_alloc_(set|get)_vma()
  Revert "android: binder: stop saving a pointer to the VMA"
  Revert "binder_alloc: add missing mmap_lock calls when using the VMA"
  binder: fix UAF caused by faulty buffer cleanup
  coresight: perf: Release Coresight path when alloc trace id failed
  coresight: Fix signedness bug in tmc_etr_buf_insert_barrier_packet()

Pull compute express link fixes from Dan Williams:
 "The 'media ready' series prevents the driver from acting on bad
  capacity information, and it moves some checks earlier in the init
  sequence which impacts topics in the queue for 6.5.

  Additional hotplug testing uncovered a missing enable for memory
  decode. A debug crash fix is also included.

  Summary:

   - Stop trusting capacity data before the "media ready" indication

   - Add missing HDM decoder capability enable for the cold-plug case

   - Fix a debug message induced crash"

* tag 'cxl-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl: Explicitly initialize resources when media is not ready
  cxl/port: Fix NULL pointer access in devm_cxl_add_port()
  cxl: Move cxl_await_media_ready() to before capacity info retrieval
  cxl: Wait Memory_Info_Valid before access memory related info
  cxl/port: Enable the HDM decoder capability for switch ports

Pull ARM SoC fixes from Arnd Bergmann:
 "There have not been a lot of fixes for for the soc tree in 6.4, but
  these have been sitting here for too long.

  For the devicetree side, there is one minor warning fix for vexpress,
  the rest all all for the the NXP i.MX platforms: SoC specific bugfixes
  for the iMX8 clocks and its USB-3.0 gadget device, as well as board
  specific fixes for regulators and the phy on some of the i.MX boards.

  The microchip risc-v and arm32 maintainers now also add a shared
  maintainer file entry for the arm64 parts.

  The remaining fixes are all for firmware drivers, addressing mistakes
  in the optee, scmi and ff-a firmware driver implementation, mostly in
  the error handling code, incorrect use of the alloc_workqueue()
  interface in SCMI, and compatibility with corner cases of the firmware
  implementation"

* tag 'arm-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  MAINTAINERS: update arm64 Microchip entries
  arm64: dts: imx8: fix USB 3.0 Gadget Failure in QM & QXPB0 at super speed
  dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type
  arm64: dts: colibri-imx8x: delete adc1 and dsp
  arm64: dts: colibri-imx8x: fix iris pinctrl configuration
  arm64: dts: colibri-imx8x: move pinctrl property from SoM to eval board
  arm64: dts: colibri-imx8x: fix eval board pin configuration
  arm64: dts: imx8mp: Fix video clock parents
  ARM: dts: imx6qdl-mba6: Add missing pvcie-supply regulator
  ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3
  arm64: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay
  arm64: dts: imx8mn: Fix video clock parents
  firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors
  firmware: arm_ffa: Fix FFA device names for logical partitions
  firmware: arm_ffa: Fix usage of partition info get count flag
  firmware: arm_ffa: Check if ffa_driver remove is present before executing
  arm64: dts: arm: add missing cache properties
  ARM: dts: vexpress: add missing cache properties
  firmware: arm_scmi: Fix incorrect alloc_workqueue() invocation
  optee: fix uninited async notif value

Pull PCI fix from Bjorn Helgaas:

 - Quirk Ice Lake Root Ports to work around DPC log size issue (Mika
   Westerberg)

* tag 'pci-v6.4-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  PCI/DPC: Quirk PIO log size for Intel Ice Lake Root Ports

Pull VFIO fix from Alex Williamson:

 - Test for and return error for invalid pfns through the pin pages
   interface (Yan Zhao)

* tag 'vfio-v6.4-rc4' of https://github.com/awilliam/linux-vfio:
  vfio/type1: check pfn valid before converting to struct page

Pull block fixes from Jens Axboe:
 "A few fixes for the storage side of things:

   - Fix bio caching condition for passthrough IO (Anuj)

   - end-of-device check fix for zero sized devices (Christoph)

   - Update Paolo's email address

   - NVMe pull request via Keith with a single quirk addition

   - Fix regression in how wbt enablement is done (Yu)

   - Fix race in active queue accounting (Tian)"

* tag 'block-6.4-2023-05-26' of git://git.kernel.dk/linux:
  NVMe: Add MAXIO 1602 to bogus nid list.
  block: make bio_check_eod work for zero sized devices
  block: fix bio-cache for passthru IO
  block, bfq: update Paolo's address in maintainer list
  blk-mq: fix race condition in active queue accounting
  blk-wbt: fix that wbt can't be disabled by default

Pull io_uring fix from Jens Axboe:
 "Just a single fix for the conditional schedule with the SQPOLL thread,
  dropping the uring_lock if we do need to reschedule"

* tag 'io_uring-6.4-2023-05-26' of git://git.kernel.dk/linux:
  io_uring: unlock sqd->lock before sq thread release CPU

Pull thermal control fix from Rafael Wysocki:
 "Fix a regression introduced inadvertently during the 6.3 cycle by a
  commit making the Intel int340x thermal driver use sysfs_emit_at()
  instead of scnprintf() (Srinivas Pandruvada)"

* tag 'thermal-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: int340x: Add new line for UUID display

Pull power management fixes from Rafael Wysocki:
 "Fix three issues related to the ->fast_switch callback in the AMD
  P-state cpufreq driver (Gautham R. Shenoy and Wyes Karny)"

* tag 'pm-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: amd-pstate: Update policy->cur in amd_pstate_adjust_perf()
  cpufreq: amd-pstate: Remove fast_switch_possible flag from active driver
  cpufreq: amd-pstate: Add ->fast_switch() callback

When media is not ready do not assume that the capacity information from
the identify command is valid, i.e. ->total_bytes
->partition_align_bytes ->{volatile,persistent}_only_bytes. Explicitly
zero out the capacity resources and exit early.

Given zero-init of those fields this patch is functionally equivalent to
the prior state, but it improves readability and robustness going
forward.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168506118166.3004974.13523455340007852589.stgit@djiang5-mobl3Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Pull gpio fixes from Bartosz Golaszewski:

 - fix incorrect output in in-tree gpio tools

 - fix a shell coding issue in gpio-sim selftests

 - correctly set the permissions for debugfs attributes exposed by
   gpio-mockup

 - fix chip name and pin count in gpio-f7188x for one of the supported
   models

 - fix numberspace pollution when using dynamically and statically
   allocated GPIOs together

* tag 'gpio-fixes-for-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio-f7188x: fix chip name and pin count on Nuvoton chip
  gpiolib: fix allocation of mixed dynamic/static GPIOs
  gpio: mockup: Fix mode of debugfs files
  selftests: gpio: gpio-sim: Fix BUG: test FAILED due to recent change
  tools: gpio: fix debounce_period_us output of lsgpio

Pull btrfs fixes from David Sterba:

 - handle memory allocation error in checksumming helper (reported by
   syzbot)

 - fix lockdep splat when aborting a transaction, add NOFS protection
   around invalidate_inode_pages2 that could allocate with GFP_KERNEL

 - reduce chances to hit an ENOSPC during scrub with RAID56 profiles

* tag 'for-6.4-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: use nofs when cleaning up aborted transactions
  btrfs: handle memory allocation failure in btrfs_csum_one_bio
  btrfs: scrub: try harder to mark RAID56 block groups read-only