- 19 Sep, 2014 40 commits
-
-
Daniel Vetter authored
Signed-off-by:Daniel Vetter <daniel.vetter@ffwll.ch>
-
Deepak S authored
Based on the HW team inputs. We can should not wait for the old ack, Waiting for old ack might fail, when other forcewake came before the present one is desserted. for example, if forcewake bit 0 was set and before it could get cleared forcewake bit 1 got set, HW eventually clear bit 0, when the bit 1 is cleared. i.e, bit 1 is still sent then forcewake bit 0 will still be set. Signed-off-by:
Deepak S <deepak.s@linux.intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Add comment Ville requested.] Signed-off-by:
-
Rodrigo Vivi authored
If it wasn't never enabled by kernel parameter or platform default we can avoid reading registers so many times in vain Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Rodrigo Vivi authored
Avoid touching fbc register when fbc is disabled. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Daniel Vetter authored
The ->queue_flip callback is always called from process context, so plain _irq spinlock variants are enough. Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Daniel Vetter authored
Only one place looked in need of a bit of polish: hsw_restore_lcpll. It's used by the runtime pm code and hence is always called from process context. No irq flag saving required. Another thing I've stumbled over is that we might need to add a raw forcewake_get/put helpers which don't grab a runtime pm reference but just check that the device isn't suspended - we have this duplicated in the execlist code, too. Reviewed-by:
-
Daniel Vetter authored
Grab bag for all the special cases: - i9xx_check_fifo_underruns is only called from crtc_enable hooks, i.e. process context. - i915_enable_asle_pipestat is only called from interrupt postinstall hooks. So again process context. - gen8_irq_power_well_post_enable is called from the runtime pm code, which again means process context. - The open-coded hpd_irq_setup loop in _thaw is also running in process context. So for all of them the plain _irq variant is sufficient. Reviewed-by:
-
Daniel Vetter authored
irq handlers always run with interrupts locally disabled, so plain spinlocks is all we need. I've also reviewed again that they all follow the _irq_handler postfix convention. Reviewed-by:
-
Daniel Vetter authored
All the interrupt setup/teardown hooks are always run from plain process context. So again just the _irq variant is good enough. Reviewed-by:
-
Daniel Vetter authored
Work functions are in process context, so plain _irq spinlock variants is all we need. The hpd reenable work didn't follow the _work/_work_func postfix naming scheme, so adjust that while at it. Reviewed-by:
-
Daniel Vetter authored
->detect callbacks are only ever called from process context, and there's no fancy nesting going on here. So plain _irq spinlock variants is what we want. Reviewed-by:
-
Daniel Vetter authored
i915_capture_error_state can be called from all kinds of contexts, so needs the full irqsave dance. But the other two places to grab and release the error state are only called from process context. So simplify them to the plaine _irq spinlock versions to clarify the locking semantics. Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com Reviewed-by:
-
Daniel Vetter authored
Now we tackle the functions also called from interrupt handlers. - intel_check_page_flip is exclusively called from irq handlers, so a plain spin_lock is all we need. In i915_irq.c we have the convention to give all such functions an _irq_handler postfix, but that would look strange and als be a bit a misleading name. I've opted for a WARN_ON(!in_irq()) instead. - The other two places left are called both from interrupt handlers and from our reset work, so need the full irqsave dance. Annotate them with a short comment. Reviewed-by:
-
Daniel Vetter authored
It's good practice to use the more specific versions for irq save spinlocks both as executable documentation and to enforce saner design. The _irqsave version really should only be used if the calling context is unknown and there's a good reason to call a function from all kinds of places. This is the first step whice replaces all occurances of _irqsave in process context with the simpler irq disable/enable variants. We don't have any funky spinlock nesting going on, especially since the event_lock is the outermost of the irq/vblank related spinlocks. Reviewed-by:
-
Ville Syrjälä authored
We changed to an interrupt based vblank wait (as opposed to polling) in: commit 44bd93a3d367913d883be6abba9a6e51a53c4e90 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Jul 25 23:36:44 2014 +0200 drm/i915: Use generic vblank wait However we already had vblank waits on the wrong side of drm_vblank_{on,off}() calls due to various workarounds, so now we get a warning more or less every time we do a modeset, and we fail to wait for the vblank like we should. Move the drm_vblank_{on,off}() calls back out from intel_crtc_{enable,disable}_planes() so that all of these vblank waits return to proper operation. Also move the cxsr wait a bit earlier so that we can keep the encoder disable after we've turned off vblanks. Moving stuff out from the plane enable/disable functions seems preferrable to moving the workaround stuff in since the workarounds are required only on specific platforms. While at it switch over to the drm_crtc_ variants of the vblank on/off functions. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82525 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82490 Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: -
Daniel Vetter authored
Requested by Chris, and also requested to keep it since it's a more accurate name in his opinion. Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Daniel Vetter authored
This has the upside that it will no longer steal interrupts from the interrupt handler on pre-g4x. Furthermore this will now scream properly on all platforms if we don't have hw counters enabled. v2: Adjust to the new names. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Daniel Vetter authored
Originally the irq safe spinlock was required because of asle interrupts. But since commit 91a60f20 Author: Jani Nikula <jani.nikula@intel.com> Date: Thu Oct 31 18:55:48 2013 +0200 drm/i915: move opregion asle request handling to a work queue there's no need for this any more. So switch to the simpler mutex. v2: Cite the right commit, spotted by Jani. Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Jani Nikula authored
This does not seem to make a difference for the structs in question, but document the intent. v2: also pack union child_device_config (Daniel) Signed-off-by:
-
Daniel Vetter authored
Yet another place that wasn't properly transformed when implementing SOix. While at it convert the checks to WARN_ON on gen5+ (since we don't have UMS potentially doing stupid things on those platforms). And also add the corresponding checks to the put functions (again with a WARN_ON) for gen5+. v2: Drop the WARNINGS in the irq_put functions (including the existing one for vebox), Chris convinced me that they're not that terribly useful. v3: Don't forget about execlist code. Cc: Imre Deak <imre.deak@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: "Volkin, Bradley D" <bradley.d.volkin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com>
-
Imre Deak authored
We want to enable/disable display IRQs only if global i915 IRQs are enabled. To check the latter it's not enough to consult the DRM dev->irq_enabled flag, since runtime PM can disable/enable IRQs and it won't adjust this flag only the i915 specific dev_priv->pm._irqs_disabled flag. Fix this by using the proper intel_irqs_enabled() helper instead. Fortunately this didn't cause an actual problem since even if we enabled display IRQs too early (before enabling global i915 IRQs) the VLV_MASTER_IER would still be clear masking all IRQs. This issue was caught by commit 920dd15a2b2fc60d054646a8a1ffd6aeb6090e05 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Aug 27 10:43:37 2014 +0200 drm/i915: WARN if interrupts aren't on in en/disable_pipestat Signed-off-by:Imre Deak <imre.deak@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Ville Syrjälä authored
It seems cleaner if we keep CURCNTR at 0 when the cursor is disabled, so don't set the CURSOR_PIPE_CSC_ENABLE bit unless the cursor is enabled. Signed-off-by:
-
Ville Syrjälä authored
To make the code a bit more undestandable move the intel_crtc->cursor_base assignment into the low level update cursor routines. That's were we compare the current value with the new one so immediately seeing that it gets assigned only afterwards helps one to understand that it gets assigned only after the comparison. Signed-off-by:
-
Daniel Vetter authored
If a page isn't allocated as __GFP_MOVEABLE it won't move around, so no need to grab a reference to lock it into place. Discovered while reviewing page allocation handling in i915 gem. Acked-by:
-
Daniel Vetter authored
While discussing/reviewing __GFP_MOVEABLE behaviour and interactions with our various page allocations on irc Chris brought up that the scratch page isn't allocated as moveable, but we still grab/put a reference to lock it in place. Which is unecessary. So drop that. Acked-by:
-
Gustavo Padovan authored
7e4bf45dbd99a965c7b5d5944c6dc4246f171eb5 introduced the regression. We fix it by doing the right assignment of crtc_y Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83747Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by:
-
Chris Wilson authored
The data structure it was supposed to be sanity checking has long gone. Signed-off-by:
-
Gustavo Padovan authored
Factor out a piece of code from intel_pipe_set_base() that updates the pipe size and adjust fitter. This will help refactor the update primary plane path. v2: use struct intel_crtc as argument to intel_update_pipe_size() v3: use 'crtc' as argument name Signed-off-by:
-
Gustavo Padovan authored
Optimize code avoiding helding dev mutex if old fb and current fb are the same. v2: take Ville's comments - move comment along with the pin_and_fence call - check for error before calling i915_gem_track_fb - move old_obj != obj to an upper if condition Signed-off-by:
-
Gustavo Padovan authored
The !crtc->enabled case will now be handled by the !visible code, since the handling is basically the same. Signed-off-by:
-
Daniel Vetter authored
This was lost in commit e11aa362 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Wed Jun 18 09:52:55 2014 -0700 drm/i915: use runtime irq suspend/resume in freeze/thaw which makes the second part of this commen a bit nonsense. Both were originally added in commit 15239099 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Mar 5 09:50:58 2013 +0100 drm/i915: enable irqs earlier when resuming Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by:
-
Gustavo Padovan authored
As a preparation for atomic updates we need to split the code to check everything we are going to commit first. This patch starts the work to split intel_primary_plane_setplane() into check() and commit() parts. More work is expected on this to get a better split of the two steps. Ideally the commit() step should never fail. Signed-off-by:
-
Gustavo Padovan authored
Due to the upcoming atomic modesetting feature we need to separate some update functions into a check step that can fail and a commit step that should, ideally, never fail. The commit part can still fail, but that should be solved in another upcoming patch. Signed-off-by:
-
Gustavo Padovan authored
Due to the upcoming atomic modesetting feature we need to separate some update functions into a check step that can fail and a commit step that should, ideally, never fail. This commit splits intel_update_plane() and its commit part can still fail due to the fb pinning procedure. Signed-off-by:
-
Gustavo Padovan authored
This new struct will be the storage of src and dst coordinates between the check and commit stages of a plane update. Signed-off-by:
-
Daniel Vetter authored
Now that vlv has runtime pm we kinda should check for that like on the pch split platforms. Looks like this was simply lost in the vlv rpm enabling. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by:
-
Michel Thierry authored
Use full PPGTT as the default option in gen7. Note that aliasing PPGTT is the default option for gen8 (see HAS_PPGTT) since we're still fighting troubles around context switching and execlists. This may well come back to bite me later. Signed-off-by:
Michel Thierry <michel.thierry@intel.com> [danvet: Explain that gen8 full ppgtt is blocked on execlists for now.] Signed-off-by:
-
Rodrigo Vivi authored
If something while getting panel CRC this means that probably hw I/O error so hw is busted and try again shouldn't help much. Signed-off-by:
-
Daniel Vetter authored
Based upon a patch from Deepak, but reworked to only apply on gen7+ and with the logic a bit clarified. v2: Fix s/SHIFT/MASK/ fumble that Ville spotted. Cc: Deepak S <deepak.s@intel.com> Reviewed-by:
-
Chris Wilson authored
If we believe that the device can cross cache domains in its prefetcher (i.e. we allow neighbouring pages in different domains), we don't supply a color_adjust callback. Use the presence of this callback to better determine when we should be verifying that the GTT space we just used is valid. v2: Remove the superfluous struct drm_device function param as well. Signed-off-by:
-
