This provides the VCAP model for the Sparx5 ES2 (Egress Stage 2) VCAP.

This VCAP provides tagging and remarking functionality

This also renames a VCAP keyfield: VCAP_KF_MIRROR_ENA becomes
VCAP_KF_MIRROR_PROBE, as the first name was caused by a mistake in the
model transformation.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This improves the error message when a TC filter with CVLAN tag is used and
the selected VCAP instance does not support this.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This ensures that it will be possible for a VCAP rule to distinguish IPv6
frames from non-IP frames, as the IS0 keyset usually selected for the IPv6
traffic class in (7TUPLE) does not offer a key that specifies IPv6
directly: only non-IPv4.

The IP_SNAP key ensures that we select (at least) IP frames.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When there is only one keyset available for a certain VCAP rule size, the
particular keyset does not need a type id when encoded in the VCAP
Hardware.

This provides support for getting a keyset from a rule, when this is the
case: only one keyset fits this rule size.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
This feature/cleanup patchset includes the following patches:

 - bump version strings, by Simon Wunderlich

 - drop prandom.h includes, by Sven Eckelmann

 - fix mailing list address, by Sven Eckelmann

 - multicast feature preparation, by Linus Lüssing (2 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Occasionnaly we may get oversized packets from the hardware which
exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early
check which drops the packet to avoid invoking skb_over_panic() and move
on to processing the next packet.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver can be trivially converted, as it only triggers the gpio
pin briefly to do a reset, and it already only supports DT.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

By using __clk_is_enabled () we can avoid defining an own variable for
tracking whether enable counter is zero.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For large ranges (outside of s16) the documentation currently
recommends open-coding the validation, but it's better to use
the NLA_POLICY_FULL_RANGE() or NLA_POLICY_FULL_RANGE_SIGNED()
policy validation instead; recommend that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20230127084506.09f280619d64.I5dece85f06efa8ab0f474ca77df9e26d3553d4ab@changeidSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
bpf-next 2023-01-28

We've added 124 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 6386 insertions(+), 1827 deletions(-).

The main changes are:

1) Implement XDP hints via kfuncs with initial support for RX hash and
   timestamp metadata kfuncs, from Stanislav Fomichev and
   Toke Høiland-Jørgensen.
   Measurements on overhead: https://lore.kernel.org/bpf/875yellcx6.fsf@toke.dk

2) Extend libbpf's bpf_tracing.h support for tracing arguments of
   kprobes/uprobes and syscall as a special case, from Andrii Nakryiko.

3) Significantly reduce the search time for module symbols by livepatch
   and BPF, from Jiri Olsa and Zhen Lei.

4) Enable cpumasks to be used as kptrs, which is useful for tracing
   programs tracking which tasks end up running on which CPUs
   in different time intervals, from David Vernet.

5) Fix several issues in the dynptr processing such as stack slot liveness
   propagation, missing checks for PTR_TO_STACK variable offset, etc,
   from Kumar Kartikeya Dwivedi.

6) Various performance improvements, fixes, and introduction of more
   than just one XDP program to XSK selftests, from Magnus Karlsson.

7) Big batch to BPF samples to reduce deprecated functionality,
   from Daniel T. Lee.

8) Enable struct_ops programs to be sleepable in verifier,
   from David Vernet.

9) Reduce pr_warn() noise on BTF mismatches when they are expected under
   the CONFIG_MODULE_ALLOW_BTF_MISMATCH config anyway, from Connor O'Brien.

10) Describe modulo and division by zero behavior of the BPF runtime
    in BPF's instruction specification document, from Dave Thaler.

11) Several improvements to libbpf API documentation in libbpf.h,
    from Grant Seltzer.

12) Improve resolve_btfids header dependencies related to subcmd and add
    proper support for HOSTCC, from Ian Rogers.

13) Add ipip6 and ip6ip decapsulation support for bpf_skb_adjust_room()
    helper along with BPF selftests, from Ziyang Xuan.

14) Simplify the parsing logic of structure parameters for BPF trampoline
    in the x86-64 JIT compiler, from Pu Lehui.

15) Get BTF working for kernels with CONFIG_RUST enabled by excluding
    Rust compilation units with pahole, from Martin Rodriguez Reboredo.

16) Get bpf_setsockopt() working for kTLS on top of TCP sockets,
    from Kui-Feng Lee.

17) Disable stack protection for BPF objects in bpftool given BPF backends
    don't support it, from Holger Hoffstätte.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (124 commits)
  selftest/bpf: Make crashes more debuggable in test_progs
  libbpf: Add documentation to map pinning API functions
  libbpf: Fix malformed documentation formatting
  selftests/bpf: Properly enable hwtstamp in xdp_hw_metadata
  selftests/bpf: Calls bpf_setsockopt() on a ktls enabled socket.
  bpf: Check the protocol of a sock to agree the calls to bpf_setsockopt().
  bpf/selftests: Verify struct_ops prog sleepable behavior
  bpf: Pass const struct bpf_prog * to .check_member
  libbpf: Support sleepable struct_ops.s section
  bpf: Allow BPF_PROG_TYPE_STRUCT_OPS programs to be sleepable
  selftests/bpf: Fix vmtest static compilation error
  tools/resolve_btfids: Alter how HOSTCC is forced
  tools/resolve_btfids: Install subcmd headers
  bpf/docs: Document the nocast aliasing behavior of ___init
  bpf/docs: Document how nested trusted fields may be defined
  bpf/docs: Document cpumask kfuncs in a new file
  selftests/bpf: Add selftest suite for cpumask kfuncs
  selftests/bpf: Add nested trust selftests suite
  bpf: Enable cpumasks to be queried and used as kptrs
  bpf: Disallow NULLable pointers for trusted kfuncs
  ...
====================

Link: https://lore.kernel.org/r/20230128004827.21371-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This patch removes the msleep(4s) during netpoll_setup() if the carrier
appears instantly.

Here are some scenarios where this workaround is counter-productive in
modern ages:

Servers which have BMC communicating over NC-SI via the same NIC as gets
used for netconsole. BMC will keep the PHY up, hence the carrier
appearing instantly.

The link is fibre, SERDES getting sync could happen within 0.1Hz, and
the carrier also appears instantly.

Other than that, if a driver is reporting instant carrier and then
losing it, this is probably a driver bug.
Reported-by: Michael van der Westhuizen <rmikey@meta.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230125185230.3574681-1-leitao@debian.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Conflicts:

drivers/net/ethernet/intel/ice/ice_main.c
  418e5340 ("ice: move devlink port creation/deletion")
  643ef23b ("ice: Introduce local var for readability")
https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/
https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/

drivers/net/ethernet/engleder/tsnep_main.c
  3d53aaef ("tsnep: Fix TX queue stop/wake for multiple queues")
  25faa6a4 ("tsnep: Replace TX spin_lock with __netif_tx_lock")
https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/

net/netfilter/nf_conntrack_proto_sctp.c
  13bd9b31 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"")
  a44b7651 ("netfilter: conntrack: unify established states for SCTP paths")
  f71cb8f4 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets")
https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/
https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix description for tristate and help sections which include inaccurate
information.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230126190110.9124-1-arinc.unal@arinc9.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Magnus Karlsson says:

====================
net: xdp: execute xdp_do_flush() before napi_complete_done()

Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found in [1].

The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in [2].

The drivers have only been compile-tested since I do not own any of
the HW below. So if you are a maintainer, it would be great if you
could take a quick look to make sure I did not mess something up.

Note that these were the drivers I found that violated the ordering by
running a simple script and manually checking the ones that came up as
potential offenders. But the script was not perfect in any way. There
might still be offenders out there, since the script can generate
false negatives.

[1] https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
[2] https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/
====================

Link: https://lore.kernel.org/r/20230125074901.2737-1-magnus.karlsson@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.

The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.

Fixes: d678be1d ("dpaa2-eth: add XDP_REDIRECT support")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.

The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.

Fixes: a1e031ff ("dpaa_eth: add XDP_REDIRECT support")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.

The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.

Fixes: 186b3c99 ("virtio-net: support XDP_REDIRECT")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.

The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.

Fixes: a825b611 ("net: lan966x: Add support for XDP_REDIRECT")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Make sure that xdp_do_flush() is always executed before
napi_complete_done(). This is important for two reasons. First, a
redirect to an XSKMAP assumes that a call to xdp_do_redirect() from
napi context X on CPU Y will be followed by a xdp_do_flush() from the
same napi context and CPU. This is not guaranteed if the
napi_complete_done() is executed before xdp_do_flush(), as it tells
the napi logic that it is fine to schedule napi context X on another
CPU. Details from a production system triggering this bug using the
veth driver can be found following the first link below.

The second reason is that the XDP_REDIRECT logic in itself relies on
being inside a single NAPI instance through to the xdp_do_flush() call
for RCU protection of all in-kernel data structures. Details can be
found in the second link below.

Fixes: d1b25b79 ("qede: add .ndo_xdp_xmit() and XDP_REDIRECT support")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20221220185903.1105011-1-sbohrer@cloudflare.com
Link: https://lore.kernel.org/all/20210624160609.292325-1-toke@redhat.com/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Reset stdio before printing verbose log of the SIGSEGV'ed test.
Otherwise, it's hard to understand what's going on in the cases like [0].

With the following patch applied:

	--- a/tools/testing/selftests/bpf/prog_tests/xdp_metadata.c
	+++ b/tools/testing/selftests/bpf/prog_tests/xdp_metadata.c
	@@ -392,6 +392,11 @@ void test_xdp_metadata(void)
	 		       "generate freplace packet"))
	 		goto out;

	+
	+	ASSERT_EQ(1, 2, "oops");
	+	int *x = 0;
	+	*x = 1; /* die */
	+
	 	while (!retries--) {
	 		if (bpf_obj2->bss->called)
	 			break;

Before:

 #281     xdp_metadata:FAIL
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x1f)[0x55c919d98bcf]
/lib/x86_64-linux-gnu/libc.so.6(+0x3bf90)[0x7f36aea5df90]
./test_progs(test_xdp_metadata+0x1db0)[0x55c919d8c6d0]
./test_progs(+0x23b438)[0x55c919d9a438]
./test_progs(main+0x534)[0x55c919d99454]
/lib/x86_64-linux-gnu/libc.so.6(+0x2718a)[0x7f36aea4918a]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85)[0x7f36aea49245]
./test_progs(_start+0x21)[0x55c919b82ef1]

After:

test_xdp_metadata:PASS:ip netns add xdp_metadata 0 nsec
open_netns:PASS:malloc token 0 nsec
open_netns:PASS:open /proc/self/ns/net 0 nsec
open_netns:PASS:open netns fd 0 nsec
open_netns:PASS:setns 0 nsec
..
test_xdp_metadata:FAIL:oops unexpected oops: actual 1 != expected 2
 #281     xdp_metadata:FAIL
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x1f)[0x562714a76bcf]
/lib/x86_64-linux-gnu/libc.so.6(+0x3bf90)[0x7fa663f9cf90]
./test_progs(test_xdp_metadata+0x1db0)[0x562714a6a6d0]
./test_progs(+0x23b438)[0x562714a78438]
./test_progs(main+0x534)[0x562714a77454]
/lib/x86_64-linux-gnu/libc.so.6(+0x2718a)[0x7fa663f8818a]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85)[0x7fa663f88245]
./test_progs(_start+0x21)[0x562714860ef1]

0: https://github.com/kernel-patches/bpf/actions/runs/4019879316/jobs/6907358876Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230127215705.1254316-1-sdf@google.comSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

This adds documentation for the following API functions:

- bpf_map__set_pin_path()
- bpf_map__pin_path()
- bpf_map__is_pinned()
- bpf_map__pin()
- bpf_map__unpin()
- bpf_object__pin_maps()
- bpf_object__unpin_maps()
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230126024225.520685-1-grantseltzer@gmail.com

This fixes the doxygen format documentation above the
user_ring_buffer__* APIs. There has to be a newline
before the @brief, otherwise doxygen won't render them
for libbpf.readthedocs.org.
Signed-off-by: Grant Seltzer <grantseltzer@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230126024749.522278-1-grantseltzer@gmail.com

Jiri Pirko says:

====================
devlink: Cleanup params usage

This patchset takes care of small cleanup of devlink params usage.
Some of the patches (first 2/3) are cosmetic, but I would like to
point couple of interesting ones:

Patch 9 is the main one of this set and introduces devlink instance
locking for params, similar to other devlink objects. That allows params
to be registered/unregistered when devlink instance is registered.

Patches 10-12 change mlx5 code to register non-driverinit params in the
code they are related to, and thanks to patch 8 this might be when
devlink instance is registered - for example during devlink reload.

---
v1->v2:
- Just small fix in the last patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the param registration and handling code into the eswitch offloads
code as they are related to each other. No point in having the
devlink param registration done in separate file.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the param registration and handling code into the flow steering
code as they are related to each other. No point in having the
devlink param registration done in separate file.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the param registration and handling code into the fw reset code
as they are related to each other. No point in having the devlink param
registration done in separate file.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 1d18bb1a ("devlink: allow registering parameters after
the instance") as the subject implies introduced possibility to register
devlink params even for already registered devlink instance. This is a
bit problematic, as the consistency or params list was originally
secured by the fact it is static during devlink lifetime. So in order to
protect the params list, take devlink instance lock during the params
operations. Introduce unlocked function variants and use them in drivers
in locked context. Put lock assertions to appropriate places.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Put couple of WARN_ONs in devlink_param_driverinit_value_get() function
to clearly indicate, that it is a driver bug if used without reload
support or for non-driverinit param.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink_param_driverinit_value_set() currently returns int with possible
error, but no user is checking it anyway. The only reason for a fail is
a driver bug. So convert the function to return void and put WARN_ONs
on error paths.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink_param_driverinit_value_set() call makes sense only for "
driverinit" params. However here, the param is "runtime".
devlink_param_driverinit_value_set() returns -EOPNOTSUPP in such case
and does not do anything. So remove the pointless call to
devlink_param_driverinit_value_set() entirely.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

devlink_param_driverinit_value_set() call makes sense only for
"driverinit" params. However here, both params are "runtime".
devlink_param_driverinit_value_set() returns -EOPNOTSUPP in such case
and does not do anything. So remove the pointless calls to
devlink_param_driverinit_value_set() entirely.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a WARN_ON checking the param_item for being NULL when the param
is not inserted in the list. That indicates a driver BUG. Instead of
continuing to work with NULL pointer with its consequences, return.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is no user outside the devlink code, so remove the export and make
the functions static. Move them before callers to avoid forward
declarations.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since mlx5 is the only user of devlink API to register/unregister a
single param, convert it to use array registration function allowing to
simplify the devlink API by removing the single param registration
functions.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The functions are registering and unregistering devlink params, so
change the names accordingly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
ethtool: netlink: handle SET intro/outro in the common code

Factor out the boilerplate code from SET handlers to common code.

I volunteered to refactor the extack in GET in a conversation
with Vladimir but I gave up.

The handling of failures during dump in GET handlers is a bit
unclear to me. Some code uses presence of info as indication
of dump and tries to avoid reporting errors altogether
(including extack messages).

There's also the question of whether we should have a validation
callback (similar to .set_validate here) for GET. It looks like
.parse_request was expected to perform the validation. It takes
the extack and tb directly, not via info:

	int (*parse_request)(struct ethnl_req_info *req_info,
			     struct nlattr **tb,
			     struct netlink_ext_ack *extack);

	int (*prepare_data)(const struct ethnl_req_info *req_info,
			    struct ethnl_reply_data *reply_data,
			    struct genl_info *info);

so no crashes dereferencing info possible.

But .parse_request doesn't run under rtnl nor ethnl_ops_begin().
As a result some implementations defer validation until .prepare_data
where all the locks are held and they can call out to the driver.

All this makes me think that maybe we should refactor GET in the
same direction I'm refactoring SET. Split .prepare_data, take
more locks in the core, and add a validation helper which would
take extack directly:

    - ret = ops->prepare_data(req_info, reply_data, info);
    + ret = ops->prepare_data_validate(req_info, reply_data, attrs, extack);
    + if (ret < 1) // if 0 -> skip for dump; -EOPNOTSUPP in do
    +   goto err1;
    +
    + ret = ethnl_ops_begin(dev);
    + if (ret)
    +   goto err1;
    +
    + ret = ops->prepare_data(req_info, reply_data); // no extack
    + ethnl_ops_complete(dev);

I'll file that away as a TODO for posterity / older me.

v2:
 - invert checks for coalescing to avoid error code changes
 - rebase and convert MM as well

v1: https://lore.kernel.org/all/20230121054430.642280-1-kuba@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert all SET commands where new common code is applicable.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Most ethtool SET callbacks follow the same general structure.

  ethnl_parse_header_dev_get()
  rtnl_lock()
  ethnl_ops_begin()

  ... do stuff ...

  ethtool_notify()
  ethnl_ops_complete()
  rtnl_unlock()
  ethnl_parse_header_dev_put()

This leads to a lot of copy / pasted code an bugs when people
mis-handle the error path.

Add a generic implementation of this pattern with a .set callback
in struct ethnl_request_ops called to "do stuff".

Also add an optional .set_validate which is called before
ethnl_ops_begin() -- a lot of implementations do basic request
capability / sanity checking at that point.

Because we want to avoid generating the notification when
no change happened - adopt a slightly hairy return values:
 - 0 means nothing to do (no notification)
 - 1 means done / continue
 - negative error codes on error

Reuse .hdr_attr from struct ethnl_request_ops, GET and SET
use the same attr spaces in all cases.

Convert pause as an example (and to avoid unused function warnings).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert qca8k to regmap read/write bulk API. The mgmt eth can write up
to 32 bytes of data at times. Currently we use a custom function to do
it but regmap now supports declaration of read/write bulk even without a
bus.

Drop the custom function and rework the regmap function to this new
implementation.

Rework the qca8k_fdb_read/write function to use the new
regmap_bulk_read/write as the old qca8k_bulk_read/write are now dropped.

Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add and use QCA8K_ATU_TABLE_SIZE instead of hardcoding the ATU size with
a pure number and using sizeof on the array.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>