[ Upstream commit 39056e8a ]

If the common register memory resource is not available the driver needs
to fail gracefully to disable PM. Instead of returning the error
directly store it in ret and use the already existing error path.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200310114709.1483860-1-niklas.soderlund+renesas@ragnatech.seSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bf2cbe04 ]

Clang warns:

../kernel/trace/trace.c:9335:33: warning: array comparison always
evaluates to true [-Wtautological-compare]
        if (__stop___trace_bprintk_fmt != __start___trace_bprintk_fmt)
                                       ^
1 warning generated.

These are not true arrays, they are linker defined symbols, which are
just addresses. Using the address of operator silences the warning and
does not change the runtime result of the check (tested with some print
statements compiled in with clang + ld.lld and gcc + ld.bfd in QEMU).

Link: http://lkml.kernel.org/r/20200220051011.26113-1-natechancellor@gmail.com

Link: https://github.com/ClangBuiltLinux/linux/issues/893Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0478b4fc ]

If the opp table specifies opp-supported-hw as a property but the driver
has not set a supported hardware value the OPP subsystem will reject
all the table entries.

Set a "default" value that will match the default table entries but not
conflict with any possible real bin values. Also fix a small memory leak
and free the buffer allocated by nvmem_cell_read().
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 66be340f ]

We should free resources in unlikely case of allocation failure.
Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1dff3064 ]

On P9 DD2.2 due to a CPU defect some TM instructions need to be emulated by
KVM. This is handled at first by the hardware raising a softpatch interrupt
when certain TM instructions that need KVM assistance are executed in the
guest. Althought some TM instructions per Power ISA are invalid forms they
can raise a softpatch interrupt too. For instance, 'tresume.' instruction
as defined in the ISA must have bit 31 set (1), but an instruction that
matches 'tresume.' PO and XO opcode fields but has bit 31 not set (0), like
0x7cfe9ddc, also raises a softpatch interrupt. Similarly for 'treclaim.'
and 'trechkpt.' instructions with bit 31 = 0, i.e. 0x7c00075c and
0x7c0007dc, respectively. Hence, if a code like the following is executed
in the guest it will raise a softpatch interrupt just like a 'tresume.'
when the TM facility is enabled ('tabort. 0' in the example is used only
to enable the TM facility):

int main() { asm("tabort. 0; .long 0x7cfe9ddc;"); }

Currently in such a case KVM throws a complete trace like:

[345523.705984] WARNING: CPU: 24 PID: 64413 at arch/powerpc/kvm/book3s_hv_tm.c:211 kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
[345523.705985] Modules linked in: kvm_hv(E) xt_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp ip6table_mangle ip6table_nat
iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ebtable_filter ebtables ip6table_filter
ip6_tables iptable_filter bridge stp llc sch_fq_codel ipmi_powernv at24 vmx_crypto ipmi_devintf ipmi_msghandler
ibmpowernv uio_pdrv_genirq kvm opal_prd uio leds_powernv ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp
libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456
async_raid6_recov async_memcpy async_pq async_xor async_tx libcrc32c xor raid6_pq raid1 raid0 multipath linear tg3
crct10dif_vpmsum crc32c_vpmsum ipr [last unloaded: kvm_hv]
[345523.706030] CPU: 24 PID: 64413 Comm: CPU 0/KVM Tainted: G        W   E     5.5.0+ #1
[345523.706031] NIP:  c0080000072cb9c0 LR: c0080000072b5e80 CTR: c0080000085c7850
[345523.706034] REGS: c000000399467680 TRAP: 0700   Tainted: G        W   E      (5.5.0+)
[345523.706034] MSR:  900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]>  CR: 24022428  XER: 00000000
[345523.706042] CFAR: c0080000072b5e7c IRQMASK: 0
                GPR00: c0080000072b5e80 c000000399467910 c0080000072db500 c000000375ccc720
                GPR04: c000000375ccc720 00000003fbec0000 0000a10395dda5a6 0000000000000000
                GPR08: 000000007cfe9ddc 7cfe9ddc000005dc 7cfe9ddc7c0005dc c0080000072cd530
                GPR12: c0080000085c7850 c0000003fffeb800 0000000000000001 00007dfb737f0000
                GPR16: c0002001edcca558 0000000000000000 0000000000000000 0000000000000001
                GPR20: c000000001b21258 c0002001edcca558 0000000000000018 0000000000000000
                GPR24: 0000000001000000 ffffffffffffffff 0000000000000001 0000000000001500
                GPR28: c0002001edcc4278 c00000037dd80000 800000050280f033 c000000375ccc720
[345523.706062] NIP [c0080000072cb9c0] kvmhv_p9_tm_emulation+0x68/0x620 [kvm_hv]
[345523.706065] LR [c0080000072b5e80] kvmppc_handle_exit_hv.isra.53+0x3e8/0x798 [kvm_hv]
[345523.706066] Call Trace:
[345523.706069] [c000000399467910] [c000000399467940] 0xc000000399467940 (unreliable)
[345523.706071] [c000000399467950] [c000000399467980] 0xc000000399467980
[345523.706075] [c0000003994679f0] [c0080000072bd1c4] kvmhv_run_single_vcpu+0xa1c/0xb80 [kvm_hv]
[345523.706079] [c000000399467ac0] [c0080000072bd8e0] kvmppc_vcpu_run_hv+0x5b8/0xb00 [kvm_hv]
[345523.706087] [c000000399467b90] [c0080000085c93cc] kvmppc_vcpu_run+0x34/0x48 [kvm]
[345523.706095] [c000000399467bb0] [c0080000085c582c] kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
[345523.706101] [c000000399467c40] [c0080000085b7498] kvm_vcpu_ioctl+0x3d0/0x7b0 [kvm]
[345523.706105] [c000000399467db0] [c0000000004adf9c] ksys_ioctl+0x13c/0x170
[345523.706107] [c000000399467e00] [c0000000004adff8] sys_ioctl+0x28/0x80
[345523.706111] [c000000399467e20] [c00000000000b278] system_call+0x5c/0x68
[345523.706112] Instruction dump:
[345523.706114] 419e0390 7f8a4840 409d0048 6d497c00 2f89075d 419e021c 6d497c00 2f8907dd
[345523.706119] 419e01c0 6d497c00 2f8905dd 419e00a4 <0fe00000> 38210040 38600000 ebc1fff0

and then treats the executed instruction as a 'nop'.

However the POWER9 User's Manual, in section "4.6.10 Book II Invalid
Forms", informs that for TM instructions bit 31 is in fact ignored, thus
for the TM-related invalid forms ignoring bit 31 and handling them like the
valid forms is an acceptable way to handle them. POWER8 behaves the same
way too.

This commit changes the handling of the cases here described by treating
the TM-related invalid forms that can generate a softpatch interrupt
just like their valid forms (w/ bit 31 = 1) instead of as a 'nop' and by
gently reporting any other unrecognized case to the host and treating it as
illegal instruction instead of throwing a trace and treating it as a 'nop'.
Signed-off-by: Gustavo Romero <gromero@linux.ibm.com>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-By: Michael Neuling <mikey@neuling.org>
Reviewed-by: Leonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bede86a3 ]

When creating a cm_id during REQ the id immediately becomes visible to the
other MAD handlers, and shortly after the state is moved to IB_CM_REQ_RCVD

This allows cm_rej_handler() to run concurrently and free the work:

        CPU 0                                CPU1
 cm_req_handler()
  ib_create_cm_id()
  cm_match_req()
    id_priv->state = IB_CM_REQ_RCVD
                                       cm_rej_handler()
                                         cm_acquire_id()
                                         spin_lock(&id_priv->lock)
                                         switch (id_priv->state)
  					   case IB_CM_REQ_RCVD:
                                            cm_reset_to_idle()
                                             kfree(id_priv->timewait_info);
   goto destroy
  destroy:
    kfree(id_priv->timewait_info);
                                             id_priv->timewait_info = NULL

Causing a double free or worse.

Do not free the timewait_info without also holding the
id_priv->lock. Simplify this entire flow by making the free unconditional
during cm_destroy_id() and removing the confusing special case error
unwind during creation of the timewait_info.

This also fixes a leak of the timewait if cm_destroy_id() is called in
IB_CM_ESTABLISHED with an XRC TGT QP. The state machine will be left in
ESTABLISHED while it needed to transition through IB_CM_TIMEWAIT to
release the timewait pointer.

Also fix a leak of the timewait_info if the caller mis-uses the API and
does ib_send_cm_reqs().

Fixes: a977049d ("[PATCH] IB: Add the kernel CM implementation")
Link: https://lore.kernel.org/r/20200310092545.251365-4-leon@kernel.orgSigned-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a451b123 ]

In NFSv4, the lock stateids are tied to the lockowner, and the open stateid,
so that the action of closing the file also results in either an automatic
loss of the locks, or an error of the form NFS4ERR_LOCKS_HELD.

In practice this means we must not add new locks to the open stateid
after the close process has been invoked. In fact doing so, can result
in the following panic:

 kernel BUG at lib/list_debug.c:51!
 invalid opcode: 0000 [#1] SMP NOPTI
 CPU: 2 PID: 1085 Comm: nfsd Not tainted 5.6.0-rc3+ #2
 Hardware name: VMware, Inc. VMware7,1/440BX Desktop Reference Platform, BIOS VMW71.00V.14410784.B64.1908150010 08/15/2019
 RIP: 0010:__list_del_entry_valid.cold+0x31/0x55
 Code: 1a 3d 9b e8 74 10 c2 ff 0f 0b 48 c7 c7 f0 1a 3d 9b e8 66 10 c2 ff 0f 0b 48 89 f2 48 89 fe 48 c7 c7 b0 1a 3d 9b e8 52 10 c2 ff <0f> 0b 48 89 fe 4c 89 c2 48 c7 c7 78 1a 3d 9b e8 3e 10 c2 ff 0f 0b
 RSP: 0018:ffffb296c1d47d90 EFLAGS: 00010246
 RAX: 0000000000000054 RBX: ffff8ba032456ec8 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: ffff8ba039e99cc8 RDI: ffff8ba039e99cc8
 RBP: ffff8ba032456e60 R08: 0000000000000781 R09: 0000000000000003
 R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ba009a4abe0
 R13: ffff8ba032456e8c R14: 0000000000000000 R15: ffff8ba00adb01d8
 FS:  0000000000000000(0000) GS:ffff8ba039e80000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007fb213f0b008 CR3: 00000001347de006 CR4: 00000000003606e0
 Call Trace:
  release_lock_stateid+0x2b/0x80 [nfsd]
  nfsd4_free_stateid+0x1e9/0x210 [nfsd]
  nfsd4_proc_compound+0x414/0x700 [nfsd]
  ? nfs4svc_decode_compoundargs+0x407/0x4c0 [nfsd]
  nfsd_dispatch+0xc1/0x200 [nfsd]
  svc_process_common+0x476/0x6f0 [sunrpc]
  ? svc_sock_secure_port+0x12/0x30 [sunrpc]
  ? svc_recv+0x313/0x9c0 [sunrpc]
  ? nfsd_svc+0x2d0/0x2d0 [nfsd]
  svc_process+0xd4/0x110 [sunrpc]
  nfsd+0xe3/0x140 [nfsd]
  kthread+0xf9/0x130
  ? nfsd_destroy+0x50/0x50 [nfsd]
  ? kthread_park+0x90/0x90
  ret_from_fork+0x1f/0x40

The fix is to ensure that lock creation tests for whether or not the
open stateid is unhashed, and to fail if that is the case.

Fixes: 659aefb6 ("nfsd: Ensure we don't recognise lock stateids after freeing them")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c11af813 ]

The RTC IRQ is requested before the struct rtc_device is allocated,
this may lead to a NULL pointer dereference in the IRQ handler.

To fix this issue, allocating the rtc_device struct before requesting
the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device
to register the RTC device.

Link: https://lore.kernel.org/r/20200306073404.56921-1-alexandre.belloni@bootlin.comSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f2997775 ]

Both RTC IRQs are requested before the struct rtc_device is allocated,
this may lead to a NULL pointer dereference in the IRQ handler.

To fix this issue, allocating the rtc_device struct before requesting
the IRQs using devm_rtc_allocate_device, and use rtc_register_device
to register the RTC device.

Link: https://lore.kernel.org/r/20200306010146.39762-1-alexandre.belloni@bootlin.comSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d8d74ea3 ]

Synchronize with the results from the CRQs before continuing with
the initialization. This avoids trying to send TPM commands while
the rtce buffer has not been allocated, yet.

This patch fixes an existing race condition that may occurr if the
hypervisor does not quickly respond to the VTPM_GET_RTCE_BUFFER_SIZE
request sent during initialization and therefore the ibmvtpm->rtce_buf
has not been allocated at the time the first TPM command is sent.

Fixes: 132f7629 ("drivers/char/tpm: Add new device driver to support IBM vTPM")
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Nayna Jain <nayna@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit eb576086 ]

We already has similar code in ext4_mb_complex_scan_group(), but
ext4_mb_simple_scan_group() still affected.

Other reports: https://www.spinics.net/lists/linux-ext4/msg60231.htmlReviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Link: https://lore.kernel.org/r/20200310150156.641-1-dmonakhov@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2e107cf8 ]

In xchk_dir_actor, we attempt to validate the directory hash structures
by performing a directory entry lookup by (hashed) name.  If the lookup
returns ENOENT, that means that the hash information is corrupt.  The
_process_error functions don't catch this, so we have to add that
explicitly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1cb5deb5 ]

If we decide that a directory free block is corrupt, we must take care
not to leak a buffer pointer to the caller.  After xfs_trans_brelse
returns, the buffer can be freed or reused, which means that we have to
set *bpp back to NULL.

Callers are supposed to notice the nonzero return value and not use the
buffer pointer, but we should code more defensively, even if all current
callers handle this situation correctly.

Fixes: de14c5f5 ("xfs: verify free block header fields")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a7463e2d ]

The shifting of buf[3] by 24 bits to the left will be promoted to
a 32 bit signed int and then sign-extended to an unsigned long. In
the unlikely event that the the top bit of buf[3] is set then all
then all the upper bits end up as also being set because of
the sign-extension and this affect the ev->post_bit_error sum.
Fix this by using the temporary u32 variable bit_error to avoid
the sign-extension promotion. This also removes the need to do the
computation twice.

Addresses-Coverity: ("Unintended sign extension")

Fixes: 267897a4 ("[media] tda10071: implement DVBv5 statistics")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 96298f64 ]

According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5,
the incoming L2CAP_ConfigReq should be handled during
OPEN state.

The section below shows the btmon trace when running
L2CAP/COS/CFD/BV-12-C before and after this change.

=== Before ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12                #22
      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16                #23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12                #24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5      #25
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5      #26
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16                #27
      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18                #28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5      #29
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14                #30
      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20                #31
      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                ......
< ACL Data TX: Handle 256 flags 0x00 dlen 14                #32
      L2CAP: Command Reject (0x01) ident 3 len 6
        Reason: Invalid CID in request (0x0002)
        Destination CID: 64
        Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5      #33
        Num handles: 1
        Handle: 256
        Count: 1
...
=== After ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12               #22
      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16               #23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12               #24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5     #25
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5     #26
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16               #27
      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18               #28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5     #29
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14               #30
      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20               #31
      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                .....
< ACL Data TX: Handle 256 flags 0x00 dlen 18               #32
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
< ACL Data TX: Handle 256 flags 0x00 dlen 12               #33
      L2CAP: Configure Request (0x04) ident 3 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5     #34
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5     #35
        Num handles: 1
        Handle: 256
        Count: 1
...
Signed-off-by: Howard Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bef18d30 ]

Fixes the occasional adapter panic when sg_reset is issued with -d, -t, -b
and -H flags.  Removal of command type HBA_IU_TYPE_SCSI_TM_REQ in
aac_hba_send since iu_type, request_id and fib_flags are not populated.
Device and target reset handlers are made to send TMF commands only when
reset_state is 0.

Link: https://lore.kernel.org/r/1581553771-25796-1-git-send-email-Sagar.Biradar@microchip.comReviewed-by: Sagar Biradar <Sagar.Biradar@microchip.com>
Signed-off-by: Sagar Biradar <Sagar.Biradar@microchip.com>
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 402f2992 ]

When use command to read values, it crashed.

command:
dd if=/sys/kernel/debug/ieee80211/phy0/ath10k/mem_value count=1 bs=4 skip=$((0x100233))

It will call to ath10k_sdio_hif_diag_read with address = 0x4008cc and buf_len = 4.

Then system crash:
[ 1786.013258] Unable to handle kernel paging request at virtual address ffffffc00bd45000
[ 1786.013273] Mem abort info:
[ 1786.013281]   ESR = 0x96000045
[ 1786.013291]   Exception class = DABT (current EL), IL = 32 bits
[ 1786.013299]   SET = 0, FnV = 0
[ 1786.013307]   EA = 0, S1PTW = 0
[ 1786.013314] Data abort info:
[ 1786.013322]   ISV = 0, ISS = 0x00000045
[ 1786.013330]   CM = 0, WnR = 1
[ 1786.013342] swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000008542a60e
[ 1786.013350] [ffffffc00bd45000] pgd=0000000000000000, pud=0000000000000000
[ 1786.013368] Internal error: Oops: 96000045 [#1] PREEMPT SMP
[ 1786.013609] Process swapper/0 (pid: 0, stack limit = 0x0000000084b153c6)
[ 1786.013623] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.86 #137
[ 1786.013631] Hardware name: MediaTek krane sku176 board (DT)
[ 1786.013643] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[ 1786.013662] pc : __memcpy+0x94/0x180
[ 1786.013678] lr : swiotlb_tbl_unmap_single+0x84/0x150
[ 1786.013686] sp : ffffff8008003c60
[ 1786.013694] x29: ffffff8008003c90 x28: ffffffae96411f80
[ 1786.013708] x27: ffffffae960d2018 x26: ffffff8019a4b9a8
[ 1786.013721] x25: 0000000000000000 x24: 0000000000000001
[ 1786.013734] x23: ffffffae96567000 x22: 00000000000051d4
[ 1786.013747] x21: 0000000000000000 x20: 00000000fe6e9000
[ 1786.013760] x19: 0000000000000004 x18: 0000000000000020
[ 1786.013773] x17: 0000000000000001 x16: 0000000000000000
[ 1786.013787] x15: 00000000ffffffff x14: 00000000000044c0
[ 1786.013800] x13: 0000000000365ba4 x12: 0000000000000000
[ 1786.013813] x11: 0000000000000001 x10: 00000037be6e9000
[ 1786.013826] x9 : ffffffc940000000 x8 : 000000000bd45000
[ 1786.013839] x7 : 0000000000000000 x6 : ffffffc00bd45000
[ 1786.013852] x5 : 0000000000000000 x4 : 0000000000000000
[ 1786.013865] x3 : 0000000000000c00 x2 : 0000000000000004
[ 1786.013878] x1 : fffffff7be6e9004 x0 : ffffffc00bd45000
[ 1786.013891] Call trace:
[ 1786.013903]  __memcpy+0x94/0x180
[ 1786.013914]  unmap_single+0x6c/0x84
[ 1786.013925]  swiotlb_unmap_sg_attrs+0x54/0x80
[ 1786.013938]  __swiotlb_unmap_sg_attrs+0x8c/0xa4
[ 1786.013952]  msdc_unprepare_data+0x6c/0x84
[ 1786.013963]  msdc_request_done+0x58/0x84
[ 1786.013974]  msdc_data_xfer_done+0x1a0/0x1c8
[ 1786.013985]  msdc_irq+0x12c/0x17c
[ 1786.013996]  __handle_irq_event_percpu+0xe4/0x250
[ 1786.014006]  handle_irq_event_percpu+0x28/0x68
[ 1786.014015]  handle_irq_event+0x48/0x78
[ 1786.014026]  handle_fasteoi_irq+0xd0/0x1a0
[ 1786.014039]  __handle_domain_irq+0x84/0xc4
[ 1786.014050]  gic_handle_irq+0x124/0x1a4
[ 1786.014059]  el1_irq+0xb0/0x128
[ 1786.014072]  cpuidle_enter_state+0x298/0x328
[ 1786.014082]  cpuidle_enter+0x30/0x40
[ 1786.014094]  do_idle+0x190/0x268
[ 1786.014104]  cpu_startup_entry+0x24/0x28
[ 1786.014116]  rest_init+0xd4/0xe0
[ 1786.014126]  start_kernel+0x30c/0x38c
[ 1786.014139] Code: f8408423 f80084c3 36100062 b8404423 (b80044c3)
[ 1786.014150] ---[ end trace 3b02ddb698ea69ee ]---
[ 1786.015415] Kernel panic - not syncing: Fatal exception in interrupt
[ 1786.015433] SMP: stopping secondary CPUs
[ 1786.015447] Kernel Offset: 0x2e8d200000 from 0xffffff8008000000
[ 1786.015458] CPU features: 0x0,2188200c
[ 1786.015466] Memory Limit: none

For sdio chip, it need the memory which is kmalloc, if it is
vmalloc from ath10k_mem_value_read, then it have a memory error.
kzalloc of ath10k_sdio_hif_diag_read32 is the correct type, so
add kzalloc in ath10k_sdio_hif_diag_read to replace the buffer
which is vmalloc from ath10k_mem_value_read.

This patch only effect sdio chip.

Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029.
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a0e40018 ]

Raven provides retimer feature support that requires i2c interaction in
order to make it work well, all settings required for this configuration
are loaded from the Atom bios which include the i2c address. If the
retimer feature is not available, we should abort the attempt to set
this feature, otherwise, it makes the following line return
I2C_CHANNEL_OPERATION_NO_RESPONSE:

 i2c_success = i2c_write(pipe_ctx, slave_address, buffer, sizeof(buffer));
 ...
 if (!i2c_success)
   ASSERT(i2c_success);

This ends up causing problems with hotplugging HDMI displays on Raven,
and causes retimer settings to warn like so:

WARNING: CPU: 1 PID: 429 at
drivers/gpu/drm/amd/amdgpu/../dal/dc/core/dc_link.c:1998
write_i2c_retimer_setting+0xc2/0x3c0 [amdgpu] Modules linked in:
edac_mce_amd ccp kvm irqbypass binfmt_misc crct10dif_pclmul crc32_pclmul
ghash_clmulni_intel snd_hda_codec_realtek snd_hda_codec_generic
ledtrig_audio snd_hda_codec_hdmi snd_hda_intel amdgpu(+) snd_hda_codec
snd_hda_core snd_hwdep snd_pcm snd_seq_midi snd_seq_midi_event
snd_rawmidi aesni_intel snd_seq amd_iommu_v2 gpu_sched aes_x86_64
crypto_simd cryptd glue_helper snd_seq_device ttm drm_kms_helper
snd_timer eeepc_wmi wmi_bmof asus_wmi sparse_keymap drm mxm_wmi snd
k10temp fb_sys_fops syscopyarea sysfillrect sysimgblt soundcore joydev
input_leds mac_hid sch_fq_codel parport_pc ppdev lp parport ip_tables
x_tables autofs4 igb i2c_algo_bit hid_generic usbhid i2c_piix4 dca ahci
hid libahci video wmi gpio_amdpt gpio_generic CPU: 1 PID: 429 Comm:
systemd-udevd Tainted: G        W         5.2.0-rc1sept162019+ #1
Hardware name: System manufacturer System Product Name/ROG STRIX B450-F
GAMING, BIOS 2605 08/06/2019
RIP: 0010:write_i2c_retimer_setting+0xc2/0x3c0 [amdgpu]
Code: ff 0f b6 4d ce 44 0f b6 45 cf 44 0f b6 c8 45 89 cf 44 89 e2 48 c7
c6 f0 34 bc c0 bf 04 00 00 00 e8 63 b0 90 ff 45 84 ff 75 02 <0f> 0b 42
0f b6 04 73 8d 50 f6 80 fa 02 77 8c 3c 0a 0f 85 c8 00 00 RSP:
0018:ffffa99d02726fd0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffffa99d02727035 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff976acc857440
RBP: ffffa99d02727018 R08: 0000000000000002 R09: 000000000002a600
R10: ffffe90610193680 R11: 00000000000005e3 R12: 000000000000005d
R13: ffff976ac4b201b8 R14: 0000000000000001 R15: 0000000000000000
FS:  00007f14f99e1680(0000) GS:ffff976acc840000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fdf212843b8 CR3: 0000000408906000 CR4: 00000000003406e0
Call Trace:
 core_link_enable_stream+0x626/0x680 [amdgpu]
 dce110_apply_ctx_to_hw+0x414/0x4e0 [amdgpu]
 dc_commit_state+0x331/0x5e0 [amdgpu]
 ? drm_calc_timestamping_constants+0xf9/0x150 [drm]
 amdgpu_dm_atomic_commit_tail+0x395/0x1e00 [amdgpu]
 ? dm_plane_helper_prepare_fb+0x20c/0x280 [amdgpu]
 commit_tail+0x42/0x70 [drm_kms_helper]
 drm_atomic_helper_commit+0x10c/0x120 [drm_kms_helper]
 amdgpu_dm_atomic_commit+0x95/0xa0 [amdgpu]
 drm_atomic_commit+0x4a/0x50 [drm]
 restore_fbdev_mode_atomic+0x1c0/0x1e0 [drm_kms_helper]
 restore_fbdev_mode+0x4c/0x160 [drm_kms_helper]
 ? _cond_resched+0x19/0x40
 drm_fb_helper_restore_fbdev_mode_unlocked+0x4e/0xa0 [drm_kms_helper]
 drm_fb_helper_set_par+0x2d/0x50 [drm_kms_helper]
 fbcon_init+0x471/0x630
 visual_init+0xd5/0x130
 do_bind_con_driver+0x20a/0x430
 do_take_over_console+0x7d/0x1b0
 do_fbcon_takeover+0x5c/0xb0
 fbcon_event_notify+0x6cd/0x8a0
 notifier_call_chain+0x4c/0x70
 blocking_notifier_call_chain+0x43/0x60
 fb_notifier_call_chain+0x1b/0x20
 register_framebuffer+0x254/0x360
 __drm_fb_helper_initial_config_and_unlock+0x2c5/0x510 [drm_kms_helper]
 drm_fb_helper_initial_config+0x35/0x40 [drm_kms_helper]
 amdgpu_fbdev_init+0xcd/0x100 [amdgpu]
 amdgpu_device_init+0x1156/0x1930 [amdgpu]
 amdgpu_driver_load_kms+0x8d/0x2e0 [amdgpu]
 drm_dev_register+0x12b/0x1c0 [drm]
 amdgpu_pci_probe+0xd3/0x160 [amdgpu]
 local_pci_probe+0x47/0xa0
 pci_device_probe+0x142/0x1b0
 really_probe+0xf5/0x3d0
 driver_probe_device+0x11b/0x130
 device_driver_attach+0x58/0x60
 __driver_attach+0xa3/0x140
 ? device_driver_attach+0x60/0x60
 ? device_driver_attach+0x60/0x60
 bus_for_each_dev+0x74/0xb0
 ? kmem_cache_alloc_trace+0x1a3/0x1c0
 driver_attach+0x1e/0x20
 bus_add_driver+0x147/0x220
 ? 0xffffffffc0cb9000
 driver_register+0x60/0x100
 ? 0xffffffffc0cb9000
 __pci_register_driver+0x5a/0x60
 amdgpu_init+0x74/0x83 [amdgpu]
 do_one_initcall+0x4a/0x1fa
 ? _cond_resched+0x19/0x40
 ? kmem_cache_alloc_trace+0x3f/0x1c0
 ? __vunmap+0x1cc/0x200
 do_init_module+0x5f/0x227
 load_module+0x2330/0x2b40
 __do_sys_finit_module+0xfc/0x120
 ? __do_sys_finit_module+0xfc/0x120
 __x64_sys_finit_module+0x1a/0x20
 do_syscall_64+0x5a/0x130
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f14f9500839
Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007fff9bc4f5a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000055afb5abce30 RCX: 00007f14f9500839
RDX: 0000000000000000 RSI: 000055afb5ace0f0 RDI: 0000000000000017
RBP: 000055afb5ace0f0 R08: 0000000000000000 R09: 000000000000000a
R10: 0000000000000017 R11: 0000000000000246 R12: 0000000000000000
R13: 000055afb5aad800 R14: 0000000000020000 R15: 0000000000000000
---[ end trace c286e96563966f08 ]---

This commit reworks the way that we handle i2c write for retimer in the
way that we abort this configuration if the feature is not available in
the device. For debug sake, we kept a simple log message in case the
retimer is not available.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1b3460a8 ]

mitigates race condition on BACO reset between GPU bootcode and driver reload
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: John Clements <john.clements@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c3e5ea6e ]

Jeff Moyer has reported that one of xfstests triggers a warning when run
on DAX-enabled filesystem:

	WARNING: CPU: 76 PID: 51024 at mm/memory.c:2317 wp_page_copy+0xc40/0xd50
	...
	wp_page_copy+0x98c/0xd50 (unreliable)
	do_wp_page+0xd8/0xad0
	__handle_mm_fault+0x748/0x1b90
	handle_mm_fault+0x120/0x1f0
	__do_page_fault+0x240/0xd70
	do_page_fault+0x38/0xd0
	handle_page_fault+0x10/0x30

The warning happens on failed __copy_from_user_inatomic() which tries to
copy data into a CoW page.

This happens because of race between MADV_DONTNEED and CoW page fault:

	CPU0					CPU1
 handle_mm_fault()
   do_wp_page()
     wp_page_copy()
       do_wp_page()
					madvise(MADV_DONTNEED)
					  zap_page_range()
					    zap_pte_range()
					      ptep_get_and_clear_full()
					      <TLB flush>
	 __copy_from_user_inatomic()
	 sees empty PTE and fails
	 WARN_ON_ONCE(1)
	 clear_page()

The solution is to re-try __copy_from_user_inatomic() under PTL after
checking that PTE is matches the orig_pte.

The second copy attempt can still fail, like due to non-readable PTE, but
there's nothing reasonable we can do about, except clearing the CoW page.
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Cc: <stable@vger.kernel.org>
Cc: Justin He <Justin.He@arm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Link: http://lkml.kernel.org/r/20200218154151.13349-1-kirill.shutemov@linux.intel.comSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3f5777fb ]

The memory for global pointer is never freed during normal program
execution, so let's do that in the main function exit as a good
programming practice.

A stray blank line is also removed.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linuxarm@huawei.com
Link: http://lore.kernel.org/lkml/1583406486-154841-2-git-send-email-john.garry@huawei.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit dce8e237 ]

KCSAN find inode->i_disksize could be accessed concurrently.

BUG: KCSAN: data-race in ext4_mark_iloc_dirty / ext4_write_end

write (marked) to 0xffff8b8932f40090 of 8 bytes by task 66792 on cpu 0:
 ext4_write_end+0x53f/0x5b0
 ext4_da_write_end+0x237/0x510
 generic_perform_write+0x1c4/0x2a0
 ext4_buffered_write_iter+0x13a/0x210
 ext4_file_write_iter+0xe2/0x9b0
 new_sync_write+0x29c/0x3a0
 __vfs_write+0x92/0xa0
 vfs_write+0xfc/0x2a0
 ksys_write+0xe8/0x140
 __x64_sys_write+0x4c/0x60
 do_syscall_64+0x8a/0x2a0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

read to 0xffff8b8932f40090 of 8 bytes by task 14414 on cpu 1:
 ext4_mark_iloc_dirty+0x716/0x1190
 ext4_mark_inode_dirty+0xc9/0x360
 ext4_convert_unwritten_extents+0x1bc/0x2a0
 ext4_convert_unwritten_io_end_vec+0xc5/0x150
 ext4_put_io_end+0x82/0x130
 ext4_writepages+0xae7/0x16f0
 do_writepages+0x64/0x120
 __writeback_single_inode+0x7d/0x650
 writeback_sb_inodes+0x3a4/0x860
 __writeback_inodes_wb+0xc4/0x150
 wb_writeback+0x43f/0x510
 wb_workfn+0x3b2/0x8a0
 process_one_work+0x39b/0x7e0
 worker_thread+0x88/0x650
 kthread+0x1d4/0x1f0
 ret_from_fork+0x35/0x40

The plain read is outside of inode->i_data_sem critical section
which results in a data race. Fix it by adding READ_ONCE().
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Link: https://lore.kernel.org/r/1582556566-3909-1-git-send-email-hqjagain@gmail.comSigned-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4cbbc3a0 ]

While unlikely the divisor in scale64_check_overflow() could be >= 32bit in
scale64_check_overflow(). do_div() truncates the divisor to 32bit at least
on 32bit platforms.

Use div64_u64() instead to avoid the truncation to 32-bit.

[ tglx: Massaged changelog ]
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200120100523.45656-1-wenyang@linux.alibaba.comSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 08bb4da9 ]

Some controllers have been observed to send zero'd events under some
conditions.  This change guards against this condition as well as adding
a trace to facilitate diagnosability of this condition.
Signed-off-by: Alain Michaud <alainm@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a3ea410c ]

Josef reported that his old-and-good Plextor ConvertX M402U video
converter spews lots of WARNINGs on the recent kernels, and it turned
out that the device uses a bulk endpoint for interrupt handling just
like 2250 board.

For fixing it, generalize the check with the proper verification of
the endpoint instead of hard-coded board type check.

Fixes: 7e5219d1 ("[media] go7007: Fix 2250 urb type")
Reported-and-tested-by: Josef Möllers <josef.moellers@suse.com>
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1162583
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206427Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a6dd255b ]

Some released ACPI FW for Huawei boards describes incorrect the port IO
address range for child devices, in that it tells us the IO port max range
is 0x3fff for each child device, which is not correct. The address range
should be [e4:e8) or similar. With this incorrect upper range, the child
device IO port resources overlap.

As such, the kernel thinks that the LPC host serial device is a child of
the IPMI device:

root@(none)$ more /proc/ioports
[...]
00ffc0e3-00ffffff : hisi-lpc-ipmi.0.auto
  00ffc0e3-00ffc0e3 : ipmi_si
  00ffc0e4-00ffc0e4 : ipmi_si
  00ffc0e5-00ffc0e5 : ipmi_si
  00ffc2f7-00ffffff : serial8250.1.auto
    00ffc2f7-00ffc2fe : serial
root@(none)$

They should both be siblings. Note that these are logical PIO addresses,
which have a direct mapping from the FW IO port ranges.

This shows up as a real issue when we enable CONFIG_KASAN and
CONFIG_DEBUG_TEST_DRIVER_REMOVE - we see use-after-free warnings in the
host removal path:

==================================================================
BUG: KASAN: use-after-free in release_resource+0x38/0xc8
Read of size 8 at addr ffff0026accdbc38 by task swapper/0/1

CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.5.0-rc6-00001-g68e186e77b5c-dirty #1593
Hardware name: Huawei Taishan 2180 /D03, BIOS Hisilicon D03 IT20 Nemo 2.0 RC0 03/30/2018
Call trace:
dump_backtrace+0x0/0x290
show_stack+0x14/0x20
dump_stack+0xf0/0x14c
print_address_description.isra.9+0x6c/0x3b8
__kasan_report+0x12c/0x23c
kasan_report+0xc/0x18
__asan_load8+0x94/0xb8
release_resource+0x38/0xc8
platform_device_del.part.10+0x80/0xe0
platform_device_unregister+0x20/0x38
hisi_lpc_acpi_remove_subdev+0x10/0x20
device_for_each_child+0xc8/0x128
hisi_lpc_acpi_remove+0x4c/0xa8
hisi_lpc_remove+0xbc/0xc0
platform_drv_remove+0x3c/0x68
really_probe+0x174/0x548
driver_probe_device+0x7c/0x148
device_driver_attach+0x94/0xa0
__driver_attach+0xa4/0x110
bus_for_each_dev+0xe8/0x158
driver_attach+0x30/0x40
bus_add_driver+0x234/0x2f0
driver_register+0xbc/0x1d0
__platform_driver_register+0x7c/0x88
hisi_lpc_driver_init+0x18/0x20
do_one_initcall+0xb4/0x258
kernel_init_freeable+0x248/0x2c0
kernel_init+0x10/0x118
ret_from_fork+0x10/0x1c

...

The issue here is that the kernel created an incorrect parent-child
resource dependency between two devices, and references the false parent
node when deleting the second child device, when it had been deleted
already.

Fix up the child device resources from FW to create proper IO port
resource relationships for broken FW.

With this, the IO port layout looks more healthy:

root@(none)$ more /proc/ioports
[...]
00ffc0e3-00ffc0e7 : hisi-lpc-ipmi.0.auto
  00ffc0e3-00ffc0e3 : ipmi_si
  00ffc0e4-00ffc0e4 : ipmi_si
  00ffc0e5-00ffc0e5 : ipmi_si
00ffc2f7-00ffc2ff : serial8250.1.auto
  00ffc2f7-00ffc2fe : serial
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e00d996a ]

Fields in "struct timer_rand_state" could be accessed concurrently.
Lockless plain reads and writes result in data races. Fix them by adding
pairs of READ|WRITE_ONCE(). The data races were reported by KCSAN,

 BUG: KCSAN: data-race in add_timer_randomness / add_timer_randomness

 write to 0xffff9f320a0a01d0 of 8 bytes by interrupt on cpu 22:
  add_timer_randomness+0x100/0x190
  add_timer_randomness at drivers/char/random.c:1152
  add_disk_randomness+0x85/0x280
  scsi_end_request+0x43a/0x4a0
  scsi_io_completion+0xb7/0x7e0
  scsi_finish_command+0x1ed/0x2a0
  scsi_softirq_done+0x1c9/0x1d0
  blk_done_softirq+0x181/0x1d0
  __do_softirq+0xd9/0x57c
  irq_exit+0xa2/0xc0
  do_IRQ+0x8b/0x190
  ret_from_intr+0x0/0x42
  cpuidle_enter_state+0x15e/0x980
  cpuidle_enter+0x69/0xc0
  call_cpuidle+0x23/0x40
  do_idle+0x248/0x280
  cpu_startup_entry+0x1d/0x1f
  start_secondary+0x1b2/0x230
  secondary_startup_64+0xb6/0xc0

 no locks held by swapper/22/0.
 irq event stamp: 32871382
 _raw_spin_unlock_irqrestore+0x53/0x60
 _raw_spin_lock_irqsave+0x21/0x60
 _local_bh_enable+0x21/0x30
 irq_exit+0xa2/0xc0

 read to 0xffff9f320a0a01d0 of 8 bytes by interrupt on cpu 2:
  add_timer_randomness+0xe8/0x190
  add_disk_randomness+0x85/0x280
  scsi_end_request+0x43a/0x4a0
  scsi_io_completion+0xb7/0x7e0
  scsi_finish_command+0x1ed/0x2a0
  scsi_softirq_done+0x1c9/0x1d0
  blk_done_softirq+0x181/0x1d0
  __do_softirq+0xd9/0x57c
  irq_exit+0xa2/0xc0
  do_IRQ+0x8b/0x190
  ret_from_intr+0x0/0x42
  cpuidle_enter_state+0x15e/0x980
  cpuidle_enter+0x69/0xc0
  call_cpuidle+0x23/0x40
  do_idle+0x248/0x280
  cpu_startup_entry+0x1d/0x1f
  start_secondary+0x1b2/0x230
  secondary_startup_64+0xb6/0xc0

 no locks held by swapper/2/0.
 irq event stamp: 37846304
 _raw_spin_unlock_irqrestore+0x53/0x60
 _raw_spin_lock_irqsave+0x21/0x60
 _local_bh_enable+0x21/0x30
 irq_exit+0xa2/0xc0

 Reported by Kernel Concurrency Sanitizer on:
 Hardware name: HP ProLiant BL660c Gen9, BIOS I38 10/17/2018

Link: https://lore.kernel.org/r/1582648024-13111-1-git-send-email-cai@lca.pwSigned-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 54f529a6 ]

SDEI has private events that need registering and enabling on each CPU.
CPUs can come and go while we are trying to do this. SDEI tries to avoid
these problems by setting the reregister flag before the register call,
so any CPUs that come online register the event too. Sticking plaster
like this doesn't work, as if the register call fails, a CPU that
subsequently comes online will register the event before reregister
is cleared.

Take cpus_read_lock() around the register and enable calls. We don't
want surprise CPUs to do the wrong thing if they race with these calls
failing.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6a6c4a4d ]

[Why]
Since the i2c payload allocation can fail need to check return codes

[How]
Clean up i2c payload allocations and check for errors
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8e84172e ]

It's incorrect to check the channel's "busy" state without taking a lock.
That shouldn't cause any real troubles, nevertheless it's always better
not to have any race conditions in the code.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200209163356.6439-5-digetx@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d80cbef3 ]

To avoid race with vchan_complete, use the race free way to terminate
running transfer.

Move vdesc->node list_del in stm32_dma_start_transfer instead of in
stm32_mdma_chan_complete to avoid another race in vchan_dma_desc_free_list.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/20200129153628.29329-9-amelie.delaunay@st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8a37963c ]

If an element is freed via RCU then recursion into BPF instrumentation
functions is not a concern. The element is already detached from the map
and the RCU callback does not hold any locks on which a kprobe, perf event
or tracepoint attached BPF program could deadlock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.259118710@linutronix.deSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 16171bff ]

Alex Shi reported the pkey macros above arch_set_user_pkey_access()
to be unused.  They are unused, and even refer to a nonexistent
CONFIG option.

But, they might have served a good use, which was to ensure that
the code does not try to set values that would not fit in the
PKRU register.  As it stands, a too-large 'pkey' value would
be likely to silently overflow the u32 new_pkru_bits.

Add a check to look for overflows.  Also add a comment to remind
any future developer to closely examine the types used to store
pkey values if arch_max_pkey() ever changes.

This boots and passes the x86 pkey selftests.
Reported-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200122165346.AD4DA150@viggo.jf.intel.comSigned-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit ef0ed05d ]

There was supposed to be a "ret = " assignment here, otherwise the
error handling on the next line won't work.

Fixes: 64b5a49d ("[media] media: imx: Add Capture Device Interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit dfc70881 ]

To avoid race with vchan_complete, use the race free way to terminate
running transfer.

Move vdesc->node list_del in stm32_mdma_start_transfer instead of in
stm32_mdma_xfer_end to avoid another race in vchan_dma_desc_free_list.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Link: https://lore.kernel.org/r/20200127085334.13163-7-amelie.delaunay@st.comSigned-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 147f1a1f ]

The "u" field in the event has three states, -1/0/1.  Using u8 however means that
comparison with -1 will always fail, so change to signed char.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit fb3063d3 ]

From the comment above the definition of the roundup_pow_of_two() macro:

     The result is undefined when n == 0.

Hence only pass positive values to roundup_pow_of_two(). This patch fixes
the following UBSAN complaint:

  UBSAN: Undefined behaviour in ./include/linux/log2.h:57:13
  shift exponent 64 is too large for 64-bit type 'long unsigned int'
  Call Trace:
   dump_stack+0xa5/0xe6
   ubsan_epilogue+0x9/0x26
   __ubsan_handle_shift_out_of_bounds.cold+0x4c/0xf9
   rxe_qp_from_attr.cold+0x37/0x5d [rdma_rxe]
   rxe_modify_qp+0x59/0x70 [rdma_rxe]
   _ib_modify_qp+0x5aa/0x7c0 [ib_core]
   ib_modify_qp+0x3b/0x50 [ib_core]
   cma_modify_qp_rtr+0x234/0x260 [rdma_cm]
   __rdma_accept+0x1a7/0x650 [rdma_cm]
   nvmet_rdma_cm_handler+0x1286/0x14cd [nvmet_rdma]
   cma_cm_event_handler+0x6b/0x330 [rdma_cm]
   cma_ib_req_handler+0xe60/0x22d0 [rdma_cm]
   cm_process_work+0x30/0x140 [ib_cm]
   cm_req_handler+0x11f4/0x1cd0 [ib_cm]
   cm_work_handler+0xb8/0x344e [ib_cm]
   process_one_work+0x569/0xb60
   worker_thread+0x7a/0x5d0
   kthread+0x1e6/0x210
   ret_from_fork+0x24/0x30

Link: https://lore.kernel.org/r/20200217205714.26937-1-bvanassche@acm.org
Fixes: 8700e3e7 ("Soft RoCE driver")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2bbc8353 ]

This test places a kprobe to function getname_flags() in the kernel
which has the following prototype:

  struct filename *getname_flags(const char __user *filename, int flags, int *empty)

The 'filename' argument points to a filename located in user space memory.

Looking at commit 88903c46 ("tracing/probe: Add ustring type for
user-space string") the kprobe should indicate that user space memory is
accessed.

Output before:

   [root@m35lp76 perf]# ./perf test 66 67
   66: Use vfs_getname probe to get syscall args filenames   : FAILED!
   67: Check open filename arg using perf trace + vfs_getname: FAILED!
   [root@m35lp76 perf]#

Output after:

   [root@m35lp76 perf]# ./perf test 66 67
   66: Use vfs_getname probe to get syscall args filenames   : Ok
   67: Check open filename arg using perf trace + vfs_getname: Ok
   [root@m35lp76 perf]#

Comments from Masami Hiramatsu:

This bug doesn't happen on x86 or other archs on which user address
space and kernel address space is the same. On some arches (ppc64 in
this case?) user address space is partially or completely the same as
kernel address space.

(Yes, they switch the world when running into the kernel) In this case,
we need to use different data access functions for each space.

That is why I introduced the "ustring" type for kprobe events.

As far as I can see, Thomas's patch is sane. Thomas, could you show us
your result on your test environment?

Comments from Thomas Richter:

Test results for s/390 included above.
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200217102111.61137-1-tmricht@linux.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e9a0ef0b ]

Some USB-audio descriptors provide a bogus volume range (e.g. volume
min and max are identical), which confuses user-space.
This patch makes the driver skipping such a control element.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206221
Link: https://lore.kernel.org/r/20200214144928.23628-1-tiwai@suse.deSigned-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9379df2f ]

During the cleanup of the aggregation session, a rx handler (or release timer)
on another CPU might still hold a pointer to the reorder buffer and could
attempt to release some packets.
Clearing pointers during cleanup avoids a theoretical use-after-free bug here.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>