- 17 Nov, 2006 8 commits
-
-
Dmitry Torokhov authored
Now that i8042 reserves IRQs early there are no more users of this function and it should be removed. Signed-off-by:Dmitry Torokhov <dtor@mail.ru>
-
Nicolas Pitre authored
Signed-off-by:
Nicolas Pitre <nico@cam.org> Signed-off-by:
-
Dmitry Torokhov authored
MUX error handling has a workaround for KBCs that get confused which port data came from and signal MUXERR while data is actually good. Unfortunately this workaround hurts with KBCs that signal timeouts as 0xfc (spec says that only 0xfd, 0xfe and 0xff are alowed with MUXERR) since it causes endless attempts to rescan i8042 serio ports. The solution is to treat 0xfc as timeout (0xfe). Signed-off-by: -
Marton Nemeth authored
In mousedev the BTN_LEFT and BTN_FORWARD were mapped to mouse button 0, causing that the user space program cannot distinguish between them through /dev/input/mice. All mice have BTN_LEFT, but not all have BTN_MIDDLE (e.g. Clevo D410J laptop). Mapping BTN_FORWARD to mouse button 2 makes the BTN_FORWARD button useful on this laptop. Signed-off-by:
Marton Nemeth <nm127@freemail.hu> Signed-off-by:
-
Stelian Pop authored
Mouse button emulation for the one-button mouse Apple machines isn't restricted to older ADB based machines. There are PPC Powerbooks where the keyboard and the mouse are no longer on the ADB bus but regular USB, and users still like (and need) to be able to emulate the middle mouse button with F11 and the right mouse button with F12. Signed-off-by: -
Julien BLACHE authored
Small readability improvement for appletouch: use canonical names instead of raw USB IDs for some of the devices. Signed-off-by:
Julien BLACHE <jb@jblache.org> Signed-off-by:
-
Julien BLACHE authored
The new Core2 Duo MacBook Pro has a new keyboard+trackpad named "Geyser IV". According to the Info.plist in the OS X kext, it looks like the Geyser IV trackpad is identical to the Geyser III trackpad: same IOClass (AppleUSBGrIIITrackpad), same acceleration tables. Signed-off-by:
-
Jason Parekh authored
Change a bit the finger detection method used by the appletouch driver to reduce touchpad "jumpiness": - Adjust the method for detecting multiple fingers. Previously, it recognized a new finger when a low sensor reading is followed by a high sensor reading. The new method checks for 'humps' in the sensor readings, so there doesn't necessarily have to be a low sensor between two high sensors for two fingers to be triggered. This allows detecting presence of two fingers on the touchpad even when they touch each other. - Change absolute coordinate calculation to us to get rid of "jumps". Instead of using full value from a sensor once it passes the threshold subtract theshold value from the reading. - Allow adjusting threshold value via module parameter. The patch doesn't seem to affect the Powerbooks but does greatly improve the touchpad behaviour on the MacBooks. Signed-off-by:
Jason Parekh <jasonparekh@gmail.com> Signed-off-by:
Stelian Pop <stelian@popies.net> Signed-off-by:
-
- 09 Nov, 2006 1 commit
-
-
Sergey Vlasov authored
psmouse_show_int_attr() and psmouse_set_int_attr() were accessing unsigned int fields as unsigned long, which gave garbage on x86_64. Signed-off-by:
Sergey Vlasov <vsu@altlinux.ru> Signed-off-by:
-
- 06 Nov, 2006 4 commits
-
-
Dmitry Torokhov authored
Signed-off-by: -
Dmitry Torokhov authored
Signed-off-by: -
Dmitry Torokhov authored
Signed-off-by: -
Dmitry Torokhov authored
Signed-off-by:
-
- 05 Nov, 2006 3 commits
-
-
Anssi Hannula authored
Logitech USB Receiver (046d:c101) has two interfaces. The first one contains fields from HID_UP_KEYBOARD and HID_UP_LED, and the other one contains fields from HID_UP_CONSUMER and HID_UP_LOGIVENDOR. This device is used with multiple wireless Logitech products, including UltraX Media Remote. All fields on both interfaces are either keys or leds. All fields in the first interface are marked as Absolute, while the fields in the second interface are marked as Relative. Marking the keys as relative causes hidinput_hid_event() to send release events right after key press events. The device has EV_REP set, so the userspace expects the device to send repeat events if a key is held down. However, as hidinput_hid_event() sends release events immediately, repeat events are not sent at all. In fact, the userspace has no way of knowing if a key is being held down. Fix this by adding a quirk for 046d:c101 which changes relative keys to absolute ones. Signed-off-by:
Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by:
-
-
Brandon Philips authored
To save a char pointer in the final assembly change to alternate string form. Signed-off-by:
Brandon Philips <brandon@ifup.org> Signed-off-by:
-
- 04 Nov, 2006 5 commits
-
-
Linus Torvalds authored
The previous commit (45c18b0b, aka "Fix unlikely (but possible) race condition on task->user access") fixed a potential oops due to __sigqueue_alloc() getting its "user" pointer out of sync with switch_user(), and accessing a user pointer that had been de-allocated on another CPU. It still left another (much less serious) problem, where a concurrent __sigqueue_alloc and swich_user could cause sigqueue_alloc to do signal pending reference counting for a _different_ user than the one it then actually ended up using. No oops, but we'd end up with the wrong signal accounting. Another case of Oleg's eagle-eyes picking up the problem. This is trivially fixed by just making sure we load whichever "user" structure we decide to use (it doesn't matter _which_ one we pick, we just need to pick one) just once. Acked-by:
Oleg Nesterov <oleg@tv-sign.ru> Cc: Andrew Morton <akpm@osdl.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
There's a possible race condition when doing a "switch_uid()" from one user to another, which could race with another thread doing a signal allocation and looking at the old thread ->user pointer as it is freed. This explains an oops reported by Lukasz Trabinski: http://permalink.gmane.org/gmane.linux.kernel/462241 We fix this by delaying the (reference-counted) freeing of the user structure until the thread signal handler lock has been released, so that we know that the signal allocation has either seen the new value or has properly incremented the reference count of the old one. Race identified by Oleg Nesterov. Cc: Lukasz Trabinski <lukasz@wsisiz.edu.pl> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Andrew Morton <akpm@osdl.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Linus Torvalds authored
Commit 5a06a363 ("[PATCH] ipc/msg.c: clean up coding style") breaks fakeroot on Alpha (variously hangs or oopses), according to a report by Falk Hueffner. The fact that the code seems to rely on compiler access ordering through the use of "volatile" is a pretty certain sign that the code has locking problems, and we should fix those properly and then remove the whole "volatile" entirely. But in the meantime, the movement of "volatile" was unintentional, and should be reverted. Cc: Falk Hueffner <falk@debian.org> Cc: Andrew Morton <akpm@osdl.org> Acked-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Jens Axboe authored
After the inode slimming patch that unionised i_pipe/i_bdev/i_cdev, it's no longer enough to check for existance of ->i_pipe to verify that this is a pipe. Original patch from Eric Dumazet <dada1@cosmosbay.com> Final solution suggested by Linus. Signed-off-by:
Jens Axboe <jens.axboe@oracle.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6: JFS: Remove redundant xattr permission checking
-
- 03 Nov, 2006 19 commits
-
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: PCI: Let PCI_MULTITHREAD_PROBE depend on BROKEN PCI: Revert "PCI: i386/x86_84: disable PCI resource decode on device disable"
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: use MII hooks only if CONFIG_MII is enabled USB Storage: unusual_devs.h entry for Sony Ericsson P990i USB: xpad: additional USB id's added USB: fix compiler issues with newer gcc versions USB: HID: add blacklist AIRcable USB, little beautification USB: usblp: fix system suspend for some systems USB: failure in usblp's error path usbtouchscreen: use endpoint address from endpoint descriptor USB: sierra: Fix id for Sierra Wireless MC8755 in new table USB: new VID/PID-combos for cp2101 hid-core: big-endian fix fix USB: usb-storage: Unusual_dev update USB: add another sierra wireless device id
-
Andreas Gruenbacher authored
The user.* extended attributes are only allowed on regular files and directories. Sticky directories further restrict write access to the owner and privileged users. (See the attr(5) man page for an explanation.) The original check in ext2/ext3 when user.* xattrs were merged was more restrictive than intended, and when the xattr permission checks were moved into the VFS, read access to user.* attributes on sticky directores ended up being denied in addition. Originally-from: Gerard Neil <xyzzy@devferret.org> Signed-off-by:
Andreas Gruenbacher <agruen@suse.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jan Engelhardt <jengelh@linux01.gwdg.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Stephen Rothwell authored
sys_move_pages() uses vmalloc() to allocate an array of structures that is fills with information passed from user mode and then passes to do_stat_pages() (in the case the node list is NULL). do_stat_pages() depends on a marker in the node field of the structure to decide how large the array is and this marker is correctly inserted into the last element of the array. However, vmalloc() doesn't zero the memory it allocates and if the user passes NULL for the node list, then the node fields are not filled in (except for the end marker). If the memory the vmalloc() returned happend to have a word with the marker value in it in just the right place, do_pages_stat will fail to fill the status field of part of the array and we will return (random) kernel data to user mode. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Cc: Christoph Lameter <clameter@engr.sgi.com> Cc: <stable@kernel.org> Signed-off-by:
-
Peer Chen authored
Add support for PATA controllers of MCP67 to amd74xx.c. Signed-off-by:
Peer Chen <pchen@nvidia.com> Cc: Jeff Garzik <jeff@garzik.org> Acked-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Oleg Nesterov authored
getdelays reports a "fatal reply error, errno 258". We don't have enough room for multi-threaded exit (PID + TGID). Signed-off-by:
-
Amol Lad authored
spin_lock_irq{save,restore} is incorrectly called here (the function can sleep after acquring the lock). done the necessary corrections and removed unwanted cli/sti. Signed-off-by:Amol Lad <amol@verismonetworks.com> Signed-off-by:
Karsten Keil <kkeil@suse.de> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
-
Stephen Rothwell authored
This is needed on bigendian 64bit architectures. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Signed-off-by:
-
Jeff Dike authored
In order to get the __NR_* constants, we need sys/syscall.h. linux/unistd.h works as well since it includes syscall.h, however syscall.h is more parsimonious. We were inconsistent in this, and this patch adds syscall.h includes where necessary and removes linux/unistd.h includes where they are not needed. asm/unistd.h also includes the __NR_* constants, but these are not the glibc-sanctioned ones, so this also removes one such inclusion. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by:
-
Jeff Dike authored
Fix a UML hang in which everything would just stop until some I/O happened - a ping, someone whacking the keyboard - at which point everything would start up again as though nothing had happened. The cause was gcc reordering some code which absolutely needed to be executed in the order in the source. When unblock_signals switches signals from off to on, it needs to see if any interrupts had happened in the critical section. The interrupt handlers check signals_enabled - if it is zero, then the handler adds a bit to the "pending" bitmask and returns. unblock_signals checks this mask to see if any signals need to be delivered. The crucial part is this: signals_enabled = 1; save_pending = pending; if(save_pending == 0) return; pending = 0; In order to avoid an interrupt arriving between reading pending and setting it to zero, in which case, the record of the interrupt would be erased, signals are enabled. What happened was that gcc reordered this so that 'save_pending = pending' came before 'signals_enabled = 1', creating a one-instruction window within which an interrupt could arrive, set its bit in pending, and have it be immediately erased. When the I/O workload is purely disk-based, the loss of a block device interrupt stops the entire I/O system because the next block request will wait for the current one to finish. Thus the system hangs until something else causes some I/O to arrive, such as a network packet or console input. The fix to this particular problem is a memory barrier between enabling signals and reading the pending signal mask. An xchg would also probably work. Looking over this code for similar problems led me to do a few more things: - make signals_enabled and pending volatile so that they don't get cached in registers - add an mb() to the return paths of block_signals and unblock_signals so that the modification of signals_enabled doesn't get shuffled into the caller in the event that these are inlined in the future. Signed-off-by:
-
Jeff Mahoney authored
Callers after reiserfs_init_bitmap_cache() expect errval to contain -EINVAL until much later. If a condition fails before errval is reset later, reiserfs_fill_super() will mistakenly return 0, causing an Oops in do_add_mount(). This patch resets errval to -EINVAL after the call. I view this as a temporary fix and real error codes should be used throughout reiserfs_fill_super(). Signed-off-by:
Jeff Mahoney <jeffm@suse.com> Signed-off-by:
-
Andrew Morton authored
WARNING: vmlinux - Section mismatch: reference to .init.text:spi_register_board_info from __ksymtab_gpl between '__ksymtab_spi_register_board_info' (at offset 0xc032f7d0) and '__ksymtab_spi_alloc_master' Fix this by removing the export. Acked-by:
David Brownell <david-b@pacbell.net> Signed-off-by:
-
Rafael J. Wysocki authored
Add a swsusp debugging mode. This does everything that's needed for a suspend except for actually suspending. So we can look in the log messages and work out a) what code is being slow and b) which drivers are misbehaving. (1) # echo testproc > /sys/power/disk # echo disk > /sys/power/state This should turn off the non-boot CPU, freeze all processes, wait for 5 seconds and then thaw the processes and the CPU. (2) # echo test > /sys/power/disk # echo disk > /sys/power/state This should turn off the non-boot CPU, freeze all processes, shrink memory, suspend all devices, wait for 5 seconds, resume the devices etc. Cc: Pavel Machek <pavel@ucw.cz> Cc: Stefan Seyfried <seife@suse.de> Signed-off-by:
-
Andrew Morton authored
WARNING: vmlinux - Section mismatch: reference to .init.data:acpi_noirq from .text between 'pcibios_penalize_isa_irq' (at offset 0xc026ffa1) and 'pirq_serverworks_get' Acked-by:
"Brown, Len" <len.brown@intel.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by:
-
Andrew Morton authored
Apparently FUTEX_FD is unfixably racy and nothing uses it (or if it does, it shouldn't). Add a warning printk, give any remaining users six months to migrate off it. Cc: Ulrich Drepper <drepper@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
-
Andrew Morton authored
printk_ratelimit() has global state which makes it not useful for callers which wish to perform ratelimiting at a particular frequency. Add a printk_timed_ratelimit() which utilises caller-provided state storage to permit more flexibility. This function can in fact be used for things other than printk ratelimiting and is perhaps poorly named. Cc: Ulrich Drepper <drepper@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Daniel Yeisley authored
It looks like there is a bug in init_reap_node() in slab.c that can cause multiple oops's on certain ES7000 configurations. The variable reap_node is defined per cpu, but only initialized on a single CPU. This causes an oops in next_reap_node() when __get_cpu_var(reap_node) returns the wrong value. Fix is below. Signed-off-by:
Dan Yeisley <dan.yeisley@unisys.com> Cc: Andi Kleen <ak@suse.de> Acked-by:
Christoph Lameter <clameter@engr.sgi.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@kernel.org> Signed-off-by:
-
Yvan Seth authored
Taken from http://bugzilla.kernel.org/show_bug.cgi?id=7439 It looks like device registration in drivers/char/ipmi/ipmi_si_intf.c was cleaned up and a small error was made when setting the class_mask. The fix is simple as the correct mask value is defined in the code but is not used. Acked-by:
Corey Minyard <minyard@acm.org> Cc: <stable@kernel.org> Signed-off-by:
-
