[ Upstream commit ca14c996 ]

Since commit:

  b059f801 ("x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS")

kexec breaks if GCC_PLUGIN_STACKLEAK=y is enabled, as the purgatory
contains undefined references to stackleak_track_stack.

Attempting to load a kexec kernel results in this failure:

  kexec: Undefined symbol: stackleak_track_stack
  kexec-bzImage64: Loading purgatory failed

Fix this by disabling the stackleak plugin for the purgatory.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: b059f801 ("x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS")
Link: https://lkml.kernel.org/r/20190923171753.GA2252517@rani.riverdale.lanSigned-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c91e3234 ]

LPTimer can use a 32KHz clock for counting. It depends on clock tree
configuration. In such a case, PWM output frequency range is limited.
Although unlikely, nothing prevents user from requesting a PWM frequency
above counting clock (32KHz for instance):
- This causes (prd - 1) = 0xffff to be written in ARR register later in
the apply() routine.
This results in badly configured PWM period (and also duty_cycle).
Add a check to report an error is such a case.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9c47b18c ]

IF the server rejected our layout return with a state error such as
NFS4ERR_BAD_STATEID, or even a stale inode error, then we do want
to clear out all the remaining layout segments and mark that stateid
as invalid.

Fixes: 1c5bd76d ("pNFS: Enable layoutreturn operation for...")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 73d8e6c7 ]

Do not try to allocate any amount of memory requested by the user.
Instead limit it to 128 registers. Actually the longest series of
consecutive allowed registers are 48, mmGB_TILE_MODE0-31 and
mmGB_MACROTILE_MODE0-15 (0x2644-0x2673).

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=111273Signed-off-by: Trek <trek00@inbox.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit dcafbd50 ]

Hawaii needs to flush caches explicitly, submitting an IB in a user
VMID from kernel mode. There is no s_fence in this case.

Fixes: eb3961a5 ("drm/amdgpu: remove fence context from the job")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit acab7131 ]

This un-breaks lookups in sets that have the 'dynamic' flag set.
Given this active example configuration:

table filter {
  set set1 {
    type ipv4_addr
    size 64
    flags dynamic,timeout
    timeout 1m
  }

  chain input {
     type filter hook input priority 0; policy accept;
  }
}

... this works:
nft add rule ip filter input add @set1 { ip saddr }

-> whenever rule is triggered, the source ip address is inserted
into the set (if it did not exist).

This won't work:
nft add rule ip filter input ip saddr @set1 counter
Error: Could not process rule: Operation not supported

In other words, we can add entries to the set, but then can't make
matching decision based on that set.

That is just wrong -- all set backends support lookups (else they would
not be very useful).
The failure comes from an explicit rejection in nft_lookup.c.

Looking at the history, it seems like NFT_SET_EVAL used to mean
'set contains expressions' (aka. "is a meter"), for instance something like

 nft add rule ip filter input meter example { ip saddr limit rate 10/second }
 or
 nft add rule ip filter input meter example { ip saddr counter }

The actual meaning of NFT_SET_EVAL however, is
'set can be updated from the packet path'.

'meters' and packet-path insertions into sets, such as
'add @set { ip saddr }' use exactly the same kernel code (nft_dynset.c)
and thus require a set backend that provides the ->update() function.

The only set that provides this also is the only one that has the
NFT_SET_EVAL feature flag.

Removing the wrong check makes the above example work.
While at it, also fix the flag check during set instantiation to
allow supported combinations only.

Fixes: 8aeff920 ("netfilter: nf_tables: add stateful object reference to set elements")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b3528b48 ]

The ast2600 can be supported by the same code as the ast2500.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190819051738.17370-3-joel@jms.id.auSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 71a228bc ]

If client mds session is evicted in CEPH_MDS_SESSION_OPENING state,
mds won't send session msg to client, and delayed_work skip
CEPH_MDS_SESSION_OPENING state session, the session hang forever.

Allow ceph_con_keepalive to reconnect a session in OPENING to avoid
session hang. Also, ensure that we skip sessions in RESTARTING and
REJECTED states since those states can't be resurrected by issuing
a keepalive.

Link: https://tracker.ceph.com/issues/41551
Signed-off-by: Erqi Chen chenerqi@gmail.com
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 75067034 ]

When filling an inode with info from the MDS, i_blkbits is being
initialized using fl_stripe_unit, which contains the stripe unit in
bytes.  Unfortunately, this doesn't make sense for directories as they
have fl_stripe_unit set to '0'.  This means that i_blkbits will be set
to 0xff, causing an UBSAN undefined behaviour in i_blocksize():

  UBSAN: Undefined behaviour in ./include/linux/fs.h:731:12
  shift exponent 255 is too large for 32-bit type 'int'

Fix this by initializing i_blkbits to CEPH_BLOCK_SHIFT if fl_stripe_unit
is zero.
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a4098bc6 ]

If MCFG area is not reserved in E820, Xen by default will defer its usage
until Dom0 registers it explicitly after ACPI parser recognizes it as
a reserved resource in DSDT. Having it reserved in E820 is not
mandatory according to "PCI Firmware Specification, rev 3.2" (par. 4.1.2)
and firmware is free to keep a hole in E820 in that place. Xen doesn't know
what exactly is inside this hole since it lacks full ACPI view of the
platform therefore it's potentially harmful to access MCFG region
without additional checks as some machines are known to provide
inconsistent information on the size of the region.

Now xen_mcfg_late() runs after acpi_init() which is too late as some basic
PCI enumeration starts exactly there as well. Trying to register a device
prior to MCFG reservation causes multiple problems with PCIe extended
capability initializations in Xen (e.g. SR-IOV VF BAR sizing). There are
no convenient hooks for us to subscribe to so register MCFG areas earlier
upon the first invocation of xen_add_device(). It should be safe to do once
since all the boot time buses must have their MCFG areas in MCFG table
already and we don't support PCI bus hot-plug.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c87a37eb ]

Currently on mmap cache policy, we always attach writeback_fid
whether mmap type is SHARED or PRIVATE. However, in the use case
of kata-container which combines 9p(Guest OS) with overlayfs(Host OS),
this behavior will trigger overlayfs' copy-up when excute command
inside container.

Link: http://lkml.kernel.org/r/20190820100325.10313-1-cgxu519@zoho.com.cnSigned-off-by: Chengguang Xu <cgxu519@zoho.com.cn>
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0ce772fe ]

The p9_tag_alloc() does not initialize the transport error t_err field.
The struct p9_req_t *req is allocated and stored in a struct p9_client
variable. The field t_err is never initialized before p9_conn_cancel()
checks its value.

KUMSAN(KernelUninitializedMemorySantizer, a new error detection tool)
reports this bug.

==================================================================
BUG: KUMSAN: use of uninitialized memory in p9_conn_cancel+0x2d9/0x3b0
Read of size 4 at addr ffff88805f9b600c by task kworker/1:2/1216

CPU: 1 PID: 1216 Comm: kworker/1:2 Not tainted 5.2.0-rc4+ #28
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
Workqueue: events p9_write_work
Call Trace:
 dump_stack+0x75/0xae
 __kumsan_report+0x17c/0x3e6
 kumsan_report+0xe/0x20
 p9_conn_cancel+0x2d9/0x3b0
 p9_write_work+0x183/0x4a0
 process_one_work+0x4d1/0x8c0
 worker_thread+0x6e/0x780
 kthread+0x1ca/0x1f0
 ret_from_fork+0x35/0x40

Allocated by task 1979:
 save_stack+0x19/0x80
 __kumsan_kmalloc.constprop.3+0xbc/0x120
 kmem_cache_alloc+0xa7/0x170
 p9_client_prepare_req.part.9+0x3b/0x380
 p9_client_rpc+0x15e/0x880
 p9_client_create+0x3d0/0xac0
 v9fs_session_init+0x192/0xc80
 v9fs_mount+0x67/0x470
 legacy_get_tree+0x70/0xd0
 vfs_get_tree+0x4a/0x1c0
 do_mount+0xba9/0xf90
 ksys_mount+0xa8/0x120
 __x64_sys_mount+0x62/0x70
 do_syscall_64+0x6d/0x1e0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 0:
(stack is not available)

The buggy address belongs to the object at ffff88805f9b6008
 which belongs to the cache p9_req_t of size 144
The buggy address is located 4 bytes inside of
 144-byte region [ffff88805f9b6008, ffff88805f9b6098)
The buggy address belongs to the page:
page:ffffea00017e6d80 refcount:1 mapcount:0 mapping:ffff888068b63740 index:0xffff88805f9b7d90 compound_mapcount: 0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 ffff888068b66450 ffff888068b66450 ffff888068b63740
raw: ffff88805f9b7d90 0000000000100001 00000001ffffffff 0000000000000000
page dumped because: kumsan: bad access detected
==================================================================

Link: http://lkml.kernel.org/r/20190613070854.10434-1-shuaibinglu@126.comSigned-off-by: Lu Shuaibing <shuaibinglu@126.com>
[dominique.martinet@cea.fr: grouped the added init with the others]
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e2751463 ]

In encode_attrs(), there is an if statement on line 1145 to check
whether label is NULL:
    if (label && (attrmask[2] & FATTR4_WORD2_SECURITY_LABEL))

When label is NULL, it is used on lines 1178-1181:
    *p++ = cpu_to_be32(label->lfs);
    *p++ = cpu_to_be32(label->pi);
    *p++ = cpu_to_be32(label->len);
    p = xdr_encode_opaque_fixed(p, label->label, label->len);

To fix these bugs, label is checked before being used.

These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4ece3125 ]

integrity_kernel_read() can fail in which case we forward to call
ahash_request_free() on a currently running request. We have to wait
for its completion before we can free the request.

This was observed by interrupting a "find / -type f -xdev -print0 | xargs -0
cat 1>/dev/null" with ctrl-c on an IMA enabled filesystem.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f5e10401 ]

integrity_kernel_read() returns the number of bytes read. If this is
a short read then this positive value is returned from
ima_calc_file_hash_atfm(). Currently this is only indirectly called from
ima_calc_file_hash() and this function only tests for the return value
being zero or nonzero and also doesn't forward the return value.
Nevertheless there's no point in returning a positive value as an error,
so translate a short read into -EINVAL.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

commit d71be2b6 upstream.

Armv8.5 introduces a new PSTATE bit known as Speculative Store Bypass
Safe (SSBS) which can be used as a mitigation against Spectre variant 4.

Additionally, a CPU may provide instructions to manipulate PSTATE.SSBS
directly, so that userspace can toggle the SSBS control without trapping
to the kernel.

This patch probes for the existence of SSBS and advertise the new instructions
to userspace if they exist.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f43e5210 upstream.

In a few places we don't properly initialize on-stack chandefs,
resulting in EDMG data to be non-zero, which broke things.

Additionally, in a few places we rely on the driver to init the
data completely, but perhaps we shouldn't as non-EDMG drivers
may not initialize the EDMG data, also initialize it there.

Cc: stable@vger.kernel.org
Fixes: 2a38075c ("nl80211: Add support for EDMG channels")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/1569239475-I2dcce394ecf873376c386a78f31c2ec8b538fa25@changeidSigned-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ea298e6e upstream.

Fix the following kasan finding:
BUG: KASAN: global-out-of-bounds in ccwgroup_create_dev+0x850/0x1140
Read of size 1 at addr 0000000000000000 by task systemd-udevd.r/561

CPU: 30 PID: 561 Comm: systemd-udevd.r Tainted: G    B
Hardware name: IBM 3906 M04 704 (LPAR)
Call Trace:
([<0000000231b3db7e>] show_stack+0x14e/0x1a8)
 [<0000000233826410>] dump_stack+0x1d0/0x218
 [<000000023216fac4>] print_address_description+0x64/0x380
 [<000000023216f5a8>] __kasan_report+0x138/0x168
 [<00000002331b8378>] ccwgroup_create_dev+0x850/0x1140
 [<00000002332b618a>] group_store+0x3a/0x50
 [<00000002323ac706>] kernfs_fop_write+0x246/0x3b8
 [<00000002321d409a>] vfs_write+0x132/0x450
 [<00000002321d47da>] ksys_write+0x122/0x208
 [<0000000233877102>] system_call+0x2a6/0x2c8

Triggered by:
openat(AT_FDCWD, "/sys/bus/ccwgroup/drivers/qeth/group",
		O_WRONLY|O_CREAT|O_TRUNC|O_CLOEXEC, 0666) = 16
write(16, "0.0.bd00,0.0.bd01,0.0.bd02", 26) = 26

The problem is that __get_next_id in ccwgroup_create_dev might set "buf"
buffer pointer to NULL and explicit check for that is required.

Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7fd25e6f upstream.

The disconnect callback was accessing the hardware-descriptor private
data after having having freed it.

Fixes: 7490b008 ("ieee802154: add support for atusb transceiver")
Cc: stable <stable@vger.kernel.org>     # 4.2
Cc: Alexander Aring <alex.aring@gmail.com>
Reported-by: syzbot+f4509a9138a1472e7e80@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a8fabb38 upstream.

In case a user process using xenbus has open transactions and is killed
e.g. via ctrl-C the following cleanup of the allocated resources might
result in a deadlock due to trying to end a transaction in the xenbus
worker thread:

[ 2551.474706] INFO: task xenbus:37 blocked for more than 120 seconds.
[ 2551.492215]       Tainted: P           OE     5.0.0-29-generic #5
[ 2551.510263] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2551.528585] xenbus          D    0    37      2 0x80000080
[ 2551.528590] Call Trace:
[ 2551.528603]  __schedule+0x2c0/0x870
[ 2551.528606]  ? _cond_resched+0x19/0x40
[ 2551.528632]  schedule+0x2c/0x70
[ 2551.528637]  xs_talkv+0x1ec/0x2b0
[ 2551.528642]  ? wait_woken+0x80/0x80
[ 2551.528645]  xs_single+0x53/0x80
[ 2551.528648]  xenbus_transaction_end+0x3b/0x70
[ 2551.528651]  xenbus_file_free+0x5a/0x160
[ 2551.528654]  xenbus_dev_queue_reply+0xc4/0x220
[ 2551.528657]  xenbus_thread+0x7de/0x880
[ 2551.528660]  ? wait_woken+0x80/0x80
[ 2551.528665]  kthread+0x121/0x140
[ 2551.528667]  ? xb_read+0x1d0/0x1d0
[ 2551.528670]  ? kthread_park+0x90/0x90
[ 2551.528673]  ret_from_fork+0x35/0x40

Fix this by doing the cleanup via a workqueue instead.
Reported-by: James Dingwall <james@dingwall.me.uk>
Fixes: fd8aa909 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses")
Cc: <stable@vger.kernel.org> # 4.11
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 89340d09 upstream.

This patch reverts commit 75437bb3 (locking/pvqspinlock: Don't
wait if vCPU is preempted).  A large performance regression was caused
by this commit.  on over-subscription scenarios.

The test was run on a Xeon Skylake box, 2 sockets, 40 cores, 80 threads,
with three VMs of 80 vCPUs each.  The score of ebizzy -M is reduced from
13000-14000 records/s to 1700-1800 records/s:

          Host                Guest                score

vanilla w/o kvm optimizations     upstream    1700-1800 records/s
vanilla w/o kvm optimizations     revert      13000-14000 records/s
vanilla w/ kvm optimizations      upstream    4500-5000 records/s
vanilla w/ kvm optimizations      revert      14000-15500 records/s

Exit from aggressive wait-early mechanism can result in premature yield
and extra scheduling latency.

Actually, only 6% of wait_early events are caused by vcpu_is_preempted()
being true.  However, when one vCPU voluntarily releases its vCPU, all
the subsequently waiters in the queue will do the same and the cascading
effect leads to bad performance.

kvm optimizations:
[1] commit d73eb57b (KVM: Boost vCPUs that are delivering interrupts)
[2] commit 266e85a5 (KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption)

Tested-by: loobinliu@tencent.com
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: loobinliu@tencent.com
Cc: stable@vger.kernel.org
Fixes: 75437bb3 (locking/pvqspinlock: Don't wait if vCPU is preempted)
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 121bd08b upstream.

We must not unconditionally set the DMA snoop bit; if the DMA API is
assuming that the device is not DMA coherent, and the device snoops the
CPU caches, the device can see stale cache lines brought in by
speculative prefetch.

This leads to the device seeing stale data, potentially resulting in
corrupted data transfers.  Commonly, this results in a descriptor fetch
error such as:

mmc0: ADMA error
mmc0: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc0: sdhci: Sys addr:  0x00000000 | Version:  0x00002202
mmc0: sdhci: Blk size:  0x00000008 | Blk cnt:  0x00000001
mmc0: sdhci: Argument:  0x00000000 | Trn mode: 0x00000013
mmc0: sdhci: Present:   0x01f50008 | Host ctl: 0x00000038
mmc0: sdhci: Power:     0x00000003 | Blk gap:  0x00000000
mmc0: sdhci: Wake-up:   0x00000000 | Clock:    0x000040d8
mmc0: sdhci: Timeout:   0x00000003 | Int stat: 0x00000001
mmc0: sdhci: Int enab:  0x037f108f | Sig enab: 0x037f108b
mmc0: sdhci: ACmd stat: 0x00000000 | Slot int: 0x00002202
mmc0: sdhci: Caps:      0x35fa0000 | Caps_1:   0x0000af00
mmc0: sdhci: Cmd:       0x0000333a | Max curr: 0x00000000
mmc0: sdhci: Resp[0]:   0x00000920 | Resp[1]:  0x001d8a33
mmc0: sdhci: Resp[2]:   0x325b5900 | Resp[3]:  0x3f400e00
mmc0: sdhci: Host ctl2: 0x00000000
mmc0: sdhci: ADMA Err:  0x00000009 | ADMA Ptr: 0x000000236d43820c
mmc0: sdhci: ============================================
mmc0: error -5 whilst initialising SD card

but can lead to other errors, and potentially direct the SDHCI
controller to read/write data to other memory locations (e.g. if a valid
descriptor is visible to the device in a stale cache line.)

Fix this by ensuring that the DMA snoop bit corresponds with the
behaviour of the DMA API.  Since the driver currently only supports DT,
use of_dma_is_coherent().  Note that device_get_dma_attr() can not be
used as that risks re-introducing this bug if/when the driver is
converted to ACPI.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d1c536e3 upstream.

ADMA errors are potentially data corrupting events; although we print
the register state, we do not usefully print the ADMA descriptors.
Worse than that, we print them by referencing their virtual address
which is meaningless when the register state gives us the DMA address
of the failing descriptor.

Print the ADMA descriptors giving their DMA addresses rather than their
virtual addresses, and print them using SDHCI_DUMP() rather than DBG().

We also do not show the correct value of the interrupt status register;
the register dump shows the current value, after we have cleared the
pending interrupts we are going to service.  What is more useful is to
print the interrupts that _were_ pending at the time the ADMA error was
encountered.  Fix that too.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0a3242bd upstream.

when creating a vGPU workload, the guest context head pointer should
be updated correctly by comparing with the exsiting workload in the
guest worklod queue including the current running context.

in some situation, there is a running context A and then received 2 new
vGPU workload context B and A. in the new workload context A, it's head
pointer should be updated with the running context A's tail.

v2: walk through guest workload list in backward way.

Cc: stable@vger.kernel.org
Signed-off-by: Xiaolin Zhang <xiaolin.zhang@intel.com>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 698c1aa9 upstream.

On the ThinkPad P71, we have one eDP connector exposed along with 5 DP
connectors, resulting in a total of 11 TMDS encoders. Since the GPU on
this system is also capable of MST, we create an additional 4 fake MST
encoders for each DP port. Unfortunately, we also do this for the eDP
port as well, resulting in:

  1 eDP port: +1 TMDS encoder
              +4 DPMST encoders
  5 DP ports: +2 TMDS encoders
              +4 DPMST encoders
	      *5 ports
	      == 35 encoders

Which breaks things, since DRM has a hard coded limit of 32 encoders.
So, fix this by not creating MSTMs for any eDP connectors. This brings
us down to 31 encoders, although we can do better.

This fixes driver probing for nouveau on the ThinkPad P71.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5fb9b797 upstream.

clk_get_parent returns an error pointer upon failure, not NULL. So the
checks as they exist won't catch a failure. This patch changes the
checks and the return values to properly handle an error pointer.

Fixes: c4d8cfe5 ("drm/msm/dsi: add implementation for helper functions")
Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e2c4ed14 upstream.

The OMAP36xx and AM/DM37x TRMs say that the maximum divider for DSS fclk
(in CM_CLKSEL_DSS) is 32. Experimentation shows that this is not
correct, and using divider of 32 breaks DSS with a flood or underflows
and sync losts. Dividers up to 31 seem to work fine.

There is another patch to the DT files to limit the divider correctly,
but as the DSS driver also needs to know the maximum divider to be able
to iteratively find good rates, we also need to do the fix in the DSS
driver.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Adam Ford <aford173@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191002122542.8449-1-tomi.valkeinen@ti.comTested-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 443f2d5b upstream.

Observe a segmentation fault when 'perf stat' is asked to repeat forever
with the interval option.

Without fix:

  # perf stat -r 0 -I 5000 -e cycles -a sleep 10
  #           time             counts unit events
       5.000211692  3,13,89,82,34,157      cycles
      10.000380119  1,53,98,52,22,294      cycles
      10.040467280       17,16,79,265      cycles
  Segmentation fault

This problem was only observed when we use forever option aka -r 0 and
works with limited repeats. Calling print_counter with ts being set to
NULL, is not a correct option when interval is set. Hence avoid
print_counter(NULL,..)  if interval is set.

With fix:

  # perf stat -r 0 -I 5000 -e cycles -a sleep 10
   #           time             counts unit events
       5.019866622  3,15,14,43,08,697      cycles
      10.039865756  3,15,16,31,95,261      cycles
      10.059950628     1,26,05,47,158      cycles
       5.009902655  3,14,52,62,33,932      cycles
      10.019880228  3,14,52,22,89,154      cycles
      10.030543876       66,90,18,333      cycles
       5.009848281  3,14,51,98,25,437      cycles
      10.029854402  3,15,14,93,04,918      cycles
       5.009834177  3,14,51,95,92,316      cycles

Committer notes:

Did the 'git bisect' to find the cset introducing the problem to add the
Fixes tag below, and at that time the problem reproduced as:

  (gdb) run stat -r0 -I500 sleep 1
  <SNIP>
  Program received signal SIGSEGV, Segmentation fault.
  print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
  866		sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, csv_sep);
  (gdb) bt
  #0  print_interval (prefix=prefix@entry=0x7fffffffc8d0 "", ts=ts@entry=0x0) at builtin-stat.c:866
  #1  0x000000000041860a in print_counters (ts=ts@entry=0x0, argc=argc@entry=2, argv=argv@entry=0x7fffffffd640) at builtin-stat.c:938
  #2  0x0000000000419a7f in cmd_stat (argc=2, argv=0x7fffffffd640, prefix=<optimized out>) at builtin-stat.c:1411
  #3  0x000000000045c65a in run_builtin (p=p@entry=0x6291b8 <commands+216>, argc=argc@entry=5, argv=argv@entry=0x7fffffffd640) at perf.c:370
  #4  0x000000000045c893 in handle_internal_command (argc=5, argv=0x7fffffffd640) at perf.c:429
  #5  0x000000000045c8f1 in run_argv (argcp=argcp@entry=0x7fffffffd4ac, argv=argv@entry=0x7fffffffd4a0) at perf.c:473
  #6  0x000000000045cac9 in main (argc=<optimized out>, argv=<optimized out>) at perf.c:588
  (gdb)

Mostly the same as just before this patch:

  Program received signal SIGSEGV, Segmentation fault.
  0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
  964		sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
  (gdb) bt
  #0  0x00000000005874a7 in print_interval (config=0xa1f2a0 <stat_config>, evlist=0xbc9b90, prefix=0x7fffffffd1c0 "`", ts=0x0) at util/stat-display.c:964
  #1  0x0000000000588047 in perf_evlist__print_counters (evlist=0xbc9b90, config=0xa1f2a0 <stat_config>, _target=0xa1f0c0 <target>, ts=0x0, argc=2, argv=0x7fffffffd670)
      at util/stat-display.c:1172
  #2  0x000000000045390f in print_counters (ts=0x0, argc=2, argv=0x7fffffffd670) at builtin-stat.c:656
  #3  0x0000000000456bb5 in cmd_stat (argc=2, argv=0x7fffffffd670) at builtin-stat.c:1960
  #4  0x00000000004dd2e0 in run_builtin (p=0xa30e00 <commands+288>, argc=5, argv=0x7fffffffd670) at perf.c:310
  #5  0x00000000004dd54d in handle_internal_command (argc=5, argv=0x7fffffffd670) at perf.c:362
  #6  0x00000000004dd694 in run_argv (argcp=0x7fffffffd4cc, argv=0x7fffffffd4c0) at perf.c:406
  #7  0x00000000004dda11 in main (argc=5, argv=0x7fffffffd670) at perf.c:531
  (gdb)

Fixes: d4f63a47 ("perf stat: Introduce print_counters function")
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.2+
Link: http://lore.kernel.org/lkml/20190904094738.9558-3-srikar@linux.vnet.ibm.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 144783a8 upstream.

Converting from ms to s requires dividing by 1000, not multiplying. So
this is currently taking the smaller of new_timeout and 1.28e8,
i.e. effectively new_timeout.

The driver knows what it set max_hw_heartbeat_ms to, so use that
value instead of doing a division at run-time.

FWIW, this can easily be tested by booting into a busybox shell and
doing "watchdog -t 5 -T 130 /dev/watchdog" - without this patch, the
watchdog fires after 130&127 == 2 seconds.

Fixes: b07e228e "watchdog: imx2_wdt: Fix set_timeout for big timeout values"
Cc: stable@vger.kernel.org # 5.2 plus anything the above got backported to
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190812131356.23039-1-linux@rasmusvillemoes.dkSigned-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d2182b2d upstream.

In a Resizable BAR Control Register, bits 13:8 control the size of the BAR.
The encoded values of these bits are as follows (see PCIe r5.0, sec
7.8.6.3):

  Value    BAR size
     0     1 MB (2^20 bytes)
     1     2 MB (2^21 bytes)
     2     4 MB (2^22 bytes)
   ...
    43     8 EB (2^63 bytes)

Previously we incorrectly set the BAR size bits for a 1 MB BAR to 0x1f
instead of 0, so devices that support that size, e.g., new megaraid_sas and
mpt3sas adapters, fail to initialize during resume from S3 sleep.

Correctly calculate the BAR size bits for Resizable BAR control registers.

Link: https://lore.kernel.org/r/20190725192552.24295-1-sumit.saxena@broadcom.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203939
Fixes: d3252ace ("PCI: Restore resized BAR state on resume")
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org	# v4.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a1a30170 upstream.

The shadow offset scratchpad was moved to 0x2000-0x2010. Update the
location to get the correct shadow offset.

Fixes: 6788958e ("PCI: vmd: Assign membar addresses from shadow registers")
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e430d802 upstream.

The timer delayed for more than 3 seconds warning was triggered during
testing.

  Workqueue: events_unbound sched_tick_remote
  RIP: 0010:sched_tick_remote+0xee/0x100
  ...
  Call Trace:
   process_one_work+0x18c/0x3a0
   worker_thread+0x30/0x380
   kthread+0x113/0x130
   ret_from_fork+0x22/0x40

The reason is that the code in collect_expired_timers() uses jiffies
unprotected:

    if (next_event > jiffies)
        base->clk = jiffies;

As the compiler is allowed to reload the value base->clk can advance
between the check and the store and in the worst case advance farther than
next event. That causes the timer expiry to be delayed until the wheel
pointer wraps around.

Convert the code to use READ_ONCE()

Fixes: 23696838 ("timers: Optimize collect_expired_timers() for NOHZ")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Liang ZhiCheng <liangzhicheng@baidu.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1568894687-14499-1-git-send-email-lirongqing@baidu.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 314eed30 upstream.

When running on a system with >512MB RAM with a 32-bit kernel built with:

	CONFIG_DEBUG_VIRTUAL=y
	CONFIG_HIGHMEM=y
	CONFIG_HARDENED_USERCOPY=y

all execve()s will fail due to argv copying into kmap()ed pages, and on
usercopy checking the calls ultimately of virt_to_page() will be looking
for "bad" kmap (highmem) pointers due to CONFIG_DEBUG_VIRTUAL=y:

 ------------[ cut here ]------------
 kernel BUG at ../arch/x86/mm/physaddr.c:83!
 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.3.0-rc8 #6
 Hardware name: Dell Inc. Inspiron 1318/0C236D, BIOS A04 01/15/2009
 EIP: __phys_addr+0xaf/0x100
 ...
 Call Trace:
  __check_object_size+0xaf/0x3c0
  ? __might_sleep+0x80/0xa0
  copy_strings+0x1c2/0x370
  copy_strings_kernel+0x2b/0x40
  __do_execve_file+0x4ca/0x810
  ? kmem_cache_alloc+0x1c7/0x370
  do_execve+0x1b/0x20
  ...

The check is from arch/x86/mm/physaddr.c:

	VIRTUAL_BUG_ON((phys_addr >> PAGE_SHIFT) > max_low_pfn);

Due to the kmap() in fs/exec.c:

		kaddr = kmap(kmapped_page);
	...
	if (copy_from_user(kaddr+offset, str, bytes_to_copy)) ...

Now we can fetch the correct page to avoid the pfn check. In both cases,
hardened usercopy will need to walk the page-span checker (if enabled)
to do sanity checking.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: f5509cc1 ("mm: Hardened usercopy")
Cc: Matthew Wilcox <willy@infradead.org>
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/201909171056.7F2FFD17@keescookSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 17f8607a upstream.

Original changelog from Steve Rostedt (except last sentence which
explains the problem, and the Fixes: tag):

I performed a three way histogram with the following commands:

echo 'irq_lat u64 lat pid_t pid' > synthetic_events
echo 'wake_lat u64 lat u64 irqlat pid_t pid' >> synthetic_events
echo 'hist:keys=common_pid:irqts=common_timestamp.usecs if function == 0xffffffff81200580' > events/timer/hrtimer_start/trigger
echo 'hist:keys=common_pid:lat=common_timestamp.usecs-$irqts:onmatch(timer.hrtimer_start).irq_lat($lat,pid) if common_flags & 1' > events/sched/sched_waking/trigger
echo 'hist:keys=pid:wakets=common_timestamp.usecs,irqlat=lat' > events/synthetic/irq_lat/trigger
echo 'hist:keys=next_pid:lat=common_timestamp.usecs-$wakets,irqlat=$irqlat:onmatch(synthetic.irq_lat).wake_lat($lat,$irqlat,next_pid)' > events/sched/sched_switch/trigger
echo 1 > events/synthetic/wake_lat/enable

Basically I wanted to see:

 hrtimer_start (calling function tick_sched_timer)

Note:

  # grep tick_sched_timer /proc/kallsyms
ffffffff81200580 t tick_sched_timer

And save the time of that, and then record sched_waking if it is called
in interrupt context and with the same pid as the hrtimer_start, it
will record the latency between that and the waking event.

I then look at when the task that is woken is scheduled in, and record
the latency between the wakeup and the task running.

At the end, the wake_lat synthetic event will show the wakeup to
scheduled latency, as well as the irq latency in from hritmer_start to
the wakeup. The problem is that I found this:

          <idle>-0     [007] d...   190.485261: wake_lat: lat=27 irqlat=190485230 pid=698
          <idle>-0     [005] d...   190.485283: wake_lat: lat=40 irqlat=190485239 pid=10
          <idle>-0     [002] d...   190.488327: wake_lat: lat=56 irqlat=190488266 pid=335
          <idle>-0     [005] d...   190.489330: wake_lat: lat=64 irqlat=190489262 pid=10
          <idle>-0     [003] d...   190.490312: wake_lat: lat=43 irqlat=190490265 pid=77
          <idle>-0     [005] d...   190.493322: wake_lat: lat=54 irqlat=190493262 pid=10
          <idle>-0     [005] d...   190.497305: wake_lat: lat=35 irqlat=190497267 pid=10
          <idle>-0     [005] d...   190.501319: wake_lat: lat=50 irqlat=190501264 pid=10

The irqlat seemed quite large! Investigating this further, if I had
enabled the irq_lat synthetic event, I noticed this:

          <idle>-0     [002] d.s.   249.429308: irq_lat: lat=164968 pid=335
          <idle>-0     [002] d...   249.429369: wake_lat: lat=55 irqlat=249429308 pid=335

Notice that the timestamp of the irq_lat "249.429308" is awfully
similar to the reported irqlat variable. In fact, all instances were
like this. It appeared that:

  irqlat=$irqlat

Wasn't assigning the old $irqlat to the new irqlat variable, but
instead was assigning the $irqts to it.

The issue is that assigning the old $irqlat to the new irqlat variable
creates a variable reference alias, but the alias creation code
forgets to make sure the alias uses the same var_ref_idx to access the
reference.

Link: http://lkml.kernel.org/r/1567375321.5282.12.camel@kernel.org

Cc: Linux Trace Devel <linux-trace-devel@vger.kernel.org>
Cc: linux-rt-users <linux-rt-users@vger.kernel.org>
Cc: stable@vger.kernel.org
Fixes: 7e8b88a3 ("tracing: Add hist trigger support for variable reference aliases")
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fe55e770 upstream.

when the battery is set to sbs-mode and  no gpio detection is enabled
"health" is always returning a value even when the battery is not present.
All other fields return "not present".
This leads to a scenario where the driver is constantly switching between
"present" and "not present" state. This generates a lot of constant
traffic on the i2c.

This commit changes the response of "health" to an error when the battery
is not responding leading to a consistent "not present" state.

Fixes: 76b16f4c ("power: supply: sbs-battery: don't assume MANUFACTURER_DATA formats")
Cc: <stable@vger.kernel.org>
Signed-off-by: Michael Nosthoff <committed@heine.so>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 99956a9e upstream.

the type flag is stored in the chip->flags field not in the
client->flags field. This currently leads to never using the ti
specific health function as client->flags doesn't use that bit.
So it's always falling back to the general one.

Fixes: 76b16f4c ("power: supply: sbs-battery: don't assume MANUFACTURER_DATA formats")
Cc: <stable@vger.kernel.org>
Signed-off-by: Michael Nosthoff <committed@heine.so>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d2f96554 upstream.

Recently, binutils had split Loongson-3 Extensions into four ASEs:
MMI, CAM, EXT, EXT2. This patch do the samething in kernel and expose
them in cpuinfo so applications can probe supported ASEs at runtime.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Yunqiang Su <ysu@wavecomp.com>
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7a4be6c1 upstream.

In case of AEAD decryption verifcation error we were using the
wrong value to zero out the plaintext buffer leaving the end of
the buffer with the false plaintext.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Fixes: ff27e85a ("crypto: ccree - add AEAD support")
CC: stable@vger.kernel.org # v4.17+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 76a95bd8 upstream.

When ccree driver runs it checks the state of the Trusted Execution
Environment CryptoCell driver before proceeding. We did not account
for cases where the TEE side is not ready or not available at all.
Fix it by only considering TEE error state after sync with the TEE
side driver.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Fixes: ab8ec965 ("crypto: ccree - add FIPS support")
CC: stable@vger.kernel.org # v4.17+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 48f89d2a upstream.

IV transfer from ofifo to class2 (set up at [29][30]) is not guaranteed
to be scheduled before the data transfer from ofifo to external memory
(set up at [38]:

[29] 10FA0004           ld: ind-nfifo (len=4) imm
[30] 81F00010               <nfifo_entry: ofifo->class2 type=msg len=16>
[31] 14820004           ld: ccb2-datasz len=4 offs=0 imm
[32] 00000010               data:0x00000010
[33] 8210010D    operation: cls1-op aes cbc init-final enc
[34] A8080B04         math: (seqin + math0)->vseqout len=4
[35] 28000010    seqfifold: skip len=16
[36] A8080A04         math: (seqin + math0)->vseqin len=4
[37] 2F1E0000    seqfifold: both msg1->2-last2-last1 len=vseqinsz
[38] 69300000   seqfifostr: msg len=vseqoutsz
[39] 5C20000C      seqstr: ccb2 ctx len=12 offs=0

If ofifo -> external memory transfer happens first, DECO will hang
(issuing a Watchdog Timeout error, if WDOG is enabled) waiting for
data availability in ofifo for the ofifo -> c2 ififo transfer.

Make sure IV transfer happens first by waiting for all CAAM internal
transfers to end before starting payload transfer.

New descriptor with jump command inserted at [37]:

[..]
[36] A8080A04         math: (seqin + math0)->vseqin len=4
[37] A1000401         jump: jsl1 all-match[!nfifopend] offset=[01] local->[38]
[38] 2F1E0000    seqfifold: both msg1->2-last2-last1 len=vseqinsz
[39] 69300000   seqfifostr: msg len=vseqoutsz
[40] 5C20000C      seqstr: ccb2 ctx len=12 offs=0

[Note: the issue is present in the descriptor from the very beginning
(cf. Fixes tag). However I've marked it v4.19+ since it's the oldest
maintained kernel that the patch applies clean against.]

Cc: <stable@vger.kernel.org> # v4.19+
Fixes: 1acebad3 ("crypto: caam - faster aead implementation")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>