- 25 May, 2017 40 commits
-
-
K. Y. Srinivasan authored
commit 59c58cee upstream. The memory allocation here needs to be non-blocking. Fix the issue. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Long Li <longli@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tomasz Nowicki authored
commit cd183740 upstream. Currently SoCs pass2.x do not emulate EA headers for ACPI boot method at all. However, for pass2.x some devices (like EDAC) advertise incorrect base addresses in their BARs which results in driver probe failure during resource request. Since all problematic blocks are on 2nd NUMA node under domain 10 add necessary quirk entry to obtain BAR addresses correction using EA header emulation. Fixes: 44f22bd9 ("PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller") Signed-off-by:
Tomasz Nowicki <tn@semihalf.com> Signed-off-by:
Robert Richter <rrichter@cavium.com> Signed-off-by:
-
Bjorn Helgaas authored
commit ced414a1 upstream. With no blank lines, it's not obvious where the macro definitions end and the uses begin. Add some blank lines and reorder the ThunderX definitions. No functional change intended. Signed-off-by:
-
Dawei Chien authored
commit 05d7839a upstream. If thermal bank with 4 sensors, thermal driver should read TEMP_MSR3. However, currently thermal driver would not read TEMP_MSR3 since mt8173 thermal driver only use 3 sensors on each thermal bank at the same time, so this patch would not effect temperature. Only if mt mt8173 thermal driver use 4 sensors on any thermal bank, would read third sensor two times, and lose fourth sensor of vale. Fixes: b7cf0053 ("thermal: Add Mediatek thermal driver for mt2701.") Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
Dawei Chien <dawei.chien@mediatek.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Thomas Gleixner authored
commit 30e7d894 upstream. Enabling the tracer selftest triggers occasionally the warning in text_poke(), which warns when the to be modified page is not marked reserved. The reason is that the tracer selftest installs kprobes on functions marked __init for testing. These probes are removed after the tests, but that removal schedules the delayed kprobes_optimizer work, which will do the actual text poke. If the work is executed after the init text is freed, then the warning triggers. The bug can be reproduced reliably when the work delay is increased. Flush the optimizer work and wait for the optimizing/unoptimizing lists to become empty before returning from the kprobes tracer selftest. That ensures that all operations which were queued due to the probes removal have completed. Link: http://lkml.kernel.org/r/20170516094802.76a468bb@gandalf.local.homeSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Fixes: 6274de49 ("kprobes: Support delayed unoptimizing") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Arnd Bergmann authored
commit 76cefef8 upstream. gcc-7 notices that the length we pass to strncat is wrong: drivers/firmware/ti_sci.c: In function 'ti_sci_probe': drivers/firmware/ti_sci.c:204:32: error: specified bound 50 equals the size of the destination [-Werror=stringop-overflow=] Instead of the total length, we must pass the length of the remaining space here. Fixes: aa276781 ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol") Acked-by:
Nishanth Menon <nm@ti.com> Acked-by:
Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Masami Hiramatsu authored
commit 5b4236e1 upstream. Since read_initrd() invokes alloc_bootmem() for allocating memory to load initrd image, it must be called after init_bootmem. This makes read_initrd() called directly from setup_arch() after init_bootmem() and mem_total_pages(). Fixes: b6323697 ("um: Setup physical memory in setup_arch()") Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Lars Ellenberg authored
commit a00ebd1c upstream. When killing kref_sub(), the unconditional additional kref_get() was not properly paired with the necessary kref_put(), causing a leak of struct drbd_requests (~ 224 Bytes) per submitted bio, and breaking DRBD in general, as the destructor of those "drbd_requests" does more than just the mempoll_free(). Fixes: bdfafc4f ("locking/atomic, kref: Kill kref_sub()") Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Al Viro authored
commit a8c39544 upstream. failing sys_wait4() won't fill struct rusage... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Suzuki K Poulose authored
commit 2952a607 upstream. Make sure we don't use a cached value of the KVM stage2 PGD while resetting the PGD. Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
commit 0c428a6a upstream. We yield the kvm->mmu_lock occassionaly while performing an operation (e.g, unmap or permission changes) on a large area of stage2 mappings. However this could possibly cause another thread to clear and free up the stage2 page tables while we were waiting for regaining the lock and thus the original thread could end up in accessing memory that was freed. This patch fixes the problem by making sure that the stage2 pagetable is still valid after we regain the lock. The fact that mmu_notifer->release() could be called twice (via __mmu_notifier_release and mmu_notifier_unregsister) enhances the possibility of hitting this race where there are two threads trying to unmap the entire guest shadow pages. While at it, cleanup the redudant checks around cond_resched_lock in stage2_wp_range(), as cond_resched_lock already does the same checks. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: andreyknvl@google.com Cc: Paolo Bonzini <pbonzini@redhat.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Suzuki K Poulose authored
commit 6c0d706b upstream. In kvm_free_stage2_pgd() we check the stage2 PGD before holding the lock and proceed to take the lock if it is valid. And we unmap the page tables, followed by releasing the lock. We reset the PGD only after dropping this lock, which could cause a race condition where another thread waiting on or even holding the lock, could potentially see that the PGD is still valid and proceed to perform a stage2 operation and later encounter a NULL PGD. [223090.242280] Unable to handle kernel NULL pointer dereference at virtual address 00000040 [223090.262330] PC is at unmap_stage2_range+0x8c/0x428 [223090.262332] LR is at kvm_unmap_hva_handler+0x2c/0x3c [223090.262531] Call trace: [223090.262533] [<ffff0000080adb78>] unmap_stage2_range+0x8c/0x428 [223090.262535] [<ffff0000080adf40>] kvm_unmap_hva_handler+0x2c/0x3c [223090.262537] [<ffff0000080ace2c>] handle_hva_to_gpa+0xb0/0x104 [223090.262539] [<ffff0000080af988>] kvm_unmap_hva+0x5c/0xbc [223090.262543] [<ffff0000080a2478>] kvm_mmu_notifier_invalidate_page+0x50/0x8c [223090.262547] [<ffff0000082274f8>] __mmu_notifier_invalidate_page+0x5c/0x84 [223090.262551] [<ffff00000820b700>] try_to_unmap_one+0x1d0/0x4a0 [223090.262553] [<ffff00000820c5c8>] rmap_walk+0x1cc/0x2e0 [223090.262555] [<ffff00000820c90c>] try_to_unmap+0x74/0xa4 [223090.262557] [<ffff000008230ce4>] migrate_pages+0x31c/0x5ac [223090.262561] [<ffff0000081f869c>] compact_zone+0x3fc/0x7ac [223090.262563] [<ffff0000081f8ae0>] compact_zone_order+0x94/0xb0 [223090.262564] [<ffff0000081f91c0>] try_to_compact_pages+0x108/0x290 [223090.262569] [<ffff0000081d5108>] __alloc_pages_direct_compact+0x70/0x1ac [223090.262571] [<ffff0000081d64a0>] __alloc_pages_nodemask+0x434/0x9f4 [223090.262572] [<ffff0000082256f0>] alloc_pages_vma+0x230/0x254 [223090.262574] [<ffff000008235e5c>] do_huge_pmd_anonymous_page+0x114/0x538 [223090.262576] [<ffff000008201bec>] handle_mm_fault+0xd40/0x17a4 [223090.262577] [<ffff0000081fb324>] __get_user_pages+0x12c/0x36c [223090.262578] [<ffff0000081fb804>] get_user_pages_unlocked+0xa4/0x1b8 [223090.262579] [<ffff0000080a3ce8>] __gfn_to_pfn_memslot+0x280/0x31c [223090.262580] [<ffff0000080a3dd0>] gfn_to_pfn_prot+0x4c/0x5c [223090.262582] [<ffff0000080af3f8>] kvm_handle_guest_abort+0x240/0x774 [223090.262584] [<ffff0000080b2bac>] handle_exit+0x11c/0x1ac [223090.262586] [<ffff0000080ab99c>] kvm_arch_vcpu_ioctl_run+0x31c/0x648 [223090.262587] [<ffff0000080a1d78>] kvm_vcpu_ioctl+0x378/0x768 [223090.262590] [<ffff00000825df5c>] do_vfs_ioctl+0x324/0x5a4 [223090.262591] [<ffff00000825e26c>] SyS_ioctl+0x90/0xa4 [223090.262595] [<ffff000008085d84>] el0_svc_naked+0x38/0x3c This patch moves the stage2 PGD manipulation under the lock. Reported-by:
Alexander Graf <agraf@suse.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by:
-
Huacai Chen authored
commit 17c99d94 upstream. Some newer Loongson-3 have 64 bytes cache lines, so select MIPS_L1_CACHE_SHIFT_6. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15755/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Jon Derrick authored
commit f63572df upstream. CMB doesn't get unmapped until removal while getting remapped on every reset. Add the unmapping and sysfs file removal to the reset path in nvme_pci_disable to match the mapping path in nvme_pci_enable. Fixes: 202021c1 ("nvme : Add sysfs entry for NVMe CMBs when appropriate") Signed-off-by:
Jon Derrick <jonathan.derrick@intel.com> Acked-by:
Keith Busch <keith.busch@intel.com> Reviewed-By:
Stephen Bates <sbates@raithlin.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Thomas Gleixner authored
commit 2c4569ca upstream. irq_set_chained_handler_and_data() sets up the chained interrupt and then stores the handler data. That's racy against an immediate interrupt which gets handled before the store of the handler data happened. The handler will dereference a NULL pointer and crash. Cure it by storing handler data before installing the chained handler. Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
Johan Hovold authored
commit 41318a2b upstream. Add missing endianness conversion when using the USB device-descriptor idProduct field to apply a hardware quirk. Fixes: 1ba47da5 ("uwb: add the i1480 DFU driver") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Daniel Micay authored
stackprotector: Increase the per-task stack canary's random range from 32 bits to 64 bits on 64-bit platforms commit 5ea30e4e upstream. The stack canary is an 'unsigned long' and should be fully initialized to random data rather than only 32 bits of random data. Signed-off-by:
Daniel Micay <danielmicay@gmail.com> Acked-by:
Arjan van de Ven <arjan@linux.intel.com> Acked-by:
Rik van Riel <riel@redhat.com> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Arjan van Ven <arjan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-hardening@lists.openwall.com Link: http://lkml.kernel.org/r/20170504133209.3053-1-danielmicay@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
James Hogan authored
commit 3a158a62 upstream. The metag implementation of strncpy_from_user() doesn't validate the src pointer, which could allow reading of arbitrary kernel memory. Add a short access_ok() check to prevent that. Its still possible for it to read across the user/kernel boundary, but it will invariably reach a NUL character after only 9 bytes, leaking only a static kernel address being loaded into D0Re0 at the beginning of __start, which is acceptable for the immediate fix. Reported-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Signed-off-by:
-
James Hogan authored
commit 8a8b5663 upstream. The __user_bad() macro used by access_ok() has a few corner cases noticed by Al Viro where it doesn't behave correctly: - The kernel range check has off by 1 errors which permit access to the first and last byte of the kernel mapped range. - The kernel range check ends at LINCORE_BASE rather than META_MEMORY_LIMIT, which is ineffective when the kernel is in global space (an extremely uncommon configuration). There are a couple of other shortcomings here too: - Access to the whole of the other address space is permitted (i.e. the global half of the address space when the kernel is in local space). This isn't ideal as it could theoretically still contain privileged mappings set up by the bootloader. - The size argument is unused, permitting user copies which start on valid pages at the end of the user address range and cross the boundary into the kernel address space (e.g. addr = 0x3ffffff0, size > 0x10). It isn't very convenient to add size checks when disallowing certain regions, and it seems far safer to be sure and explicit about what userland is able to access, so invert the logic to allow certain regions instead, and fix the off by 1 errors and missing size checks. This also allows the get_fs() == KERNEL_DS check to be more easily optimised into the user address range case. We now have 3 such allowed regions: - The user address range (incorporating the get_fs() == KERNEL_DS check). - NULL (some kernel code expects this to work, and we'll always catch the fault anyway). - The core code memory region. Fixes: 373cd784 ("metag: Memory handling") Reported-by:
-
Li, Fei authored
commit 41dc750e upstream. In case of there is no cpuidle devices registered, dev will be null, and panic will be triggered like below; In this patch, add checking of dev before usage, like that done in cpuidle_idle_call. Panic without fix: [ 184.961328] BUG: unable to handle kernel NULL pointer dereference at (null) [ 184.961328] IP: cpuidle_use_deepest_state+0x30/0x60 ... [ 184.961328] play_idle+0x8d/0x210 [ 184.961328] ? __schedule+0x359/0x8e0 [ 184.961328] ? _raw_spin_unlock_irqrestore+0x28/0x50 [ 184.961328] ? kthread_queue_delayed_work+0x41/0x80 [ 184.961328] clamp_idle_injection_func+0x64/0x1e0 Fixes: bb8313b6 (cpuidle: Allow enforcing deepest idle state selection) Signed-off-by:
Li, Fei <fei.li@intel.com> Tested-by:
Shi, Feng <fengx.shi@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
KarimAllah Ahmed authored
commit f73a7eee upstream. Ever since commit 091d42e4 ("iommu/vt-d: Copy translation tables from old kernel") the kdump kernel copies the IOMMU context tables from the previous kernel. Each device mappings will be destroyed once the driver for the respective device takes over. This unfortunately breaks the workflow of mapping and unmapping a new context to the IOMMU. The mapping function assumes that either: 1) Unmapping did the proper IOMMU flushing and it only ever flush if the IOMMU unit supports caching invalid entries. 2) The system just booted and the initialization code took care of flushing all IOMMU caches. This assumption is not true for the kdump kernel since the context tables have been copied from the previous kernel and translations could have been cached ever since. So make sure to flush the IOTLB as well when we destroy these old copied mappings. Cc: Joerg Roedel <joro@8bytes.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Anthony Liguori <aliguori@amazon.com> Signed-off-by:
KarimAllah Ahmed <karahmed@amazon.de> Acked-by:
David Woodhouse <dwmw@amazon.co.uk> Fixes: 091d42e4 ("iommu/vt-d: Copy translation tables from old kernel") Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Malcolm Priestley authored
commit 95d93e27 upstream. TID 7 is a valid value for QoS IEEE 802.11e. The switch statement that follows states 7 is valid. Remove function IsACValid and use the default case to filter invalid TIDs. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
commit 90be652c upstream. EPROM_CMD is 2 byte aligned on PCI map so calling with rtl92e_readl will return invalid data so use rtl92e_readw. The device is unable to select the right eeprom type. Signed-off-by:
-
Malcolm Priestley authored
commit 867510bd upstream. BSSIDR has two byte alignment on PCI ioremap correct the write by swapping to 16 bits first. This fixes a problem that the device associates fail because the filter is not set correctly. Signed-off-by:
-
Malcolm Priestley authored
commit baabd567 upstream. The driver attempts to alter memory that is mapped to PCI device. This is because tx_fwinfo_8190pci points to skb->data Move the pci_map_single to when completed buffer is ready to be mapped with psdec is empty to drop on mapping error. Signed-off-by:
-
Phil Elwell authored
commit ff92b9e3 upstream. vchiq_arm supports transfers less than one page and at arbitrary alignment, using the dma-mapping API to perform its cache maintenance (even though the VPU drives the DMA hardware). Read (DMA_FROM_DEVICE) operations use cache invalidation for speed, falling back to clean+invalidate on partial cache lines, with writes (DMA_TO_DEVICE) using flushes. If a read transfer has ends which aren't page-aligned, performing cache maintenance as if they were whole pages can lead to memory corruption since the partial cache lines at the ends (and any cache lines before or after the transfer area) will be invalidated. This bug was masked until the disabling of the cache flush in flush_dcache_page(). Honouring the requested transfer start- and end-points prevents the corruption. Fixes: cf9caf19 ("staging: vc04_services: Replace dmac_map_area with dmac_map_sg") Signed-off-by:
Phil Elwell <phil@raspberrypi.org> Reported-by:
Stefan Wahren <stefan.wahren@i2se.com> Tested-by:
-
Kristina Martsenko authored
commit f0e421b1 upstream. Some kernel features don't currently work if a task puts a non-zero address tag in its stack pointer, frame pointer, or frame record entries (FP, LR). For example, with a tagged stack pointer, the kernel can't deliver signals to the process, and the task is killed instead. As another example, with a tagged frame pointer or frame records, perf fails to generate call graphs or resolve symbols. For now, just document these limitations, instead of finding and fixing everything that doesn't work, as it's not known if anyone needs to use tags in these places anyway. In addition, as requested by Dave Martin, generalize the limitations into a general kernel address tag policy, and refactor tagged-pointers.txt to include it. Fixes: d50240a5 ("arm64: mm: permit use of tagged pointers at EL0") Reviewed-by:
Dave Martin <Dave.Martin@arm.com> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Kristina Martsenko <kristina.martsenko@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Kristina Martsenko authored
commit 276e9327 upstream. When handling a data abort from EL0, we currently zero the top byte of the faulting address, as we assume the address is a TTBR0 address, which may contain a non-zero address tag. However, the address may be a TTBR1 address, in which case we should not zero the top byte. This patch fixes that. The effect is that the full TTBR1 address is passed to the task's signal handler (or printed out in the kernel log). When handling a data abort from EL1, we leave the faulting address intact, as we assume it's either a TTBR1 address or a TTBR0 address with tag 0x00. This is true as far as I'm aware, we don't seem to access a tagged TTBR0 address anywhere in the kernel. Regardless, it's easy to forget about address tags, and code added in the future may not always remember to remove tags from addresses before accessing them. So add tag handling to the EL1 data abort handler as well. This also makes it consistent with the EL0 data abort handler. Fixes: d50240a5 ("arm64: mm: permit use of tagged pointers at EL0") Reviewed-by:
-
Kristina Martsenko authored
commit 7dcd9dd8 upstream. When we take a watchpoint exception, the address that triggered the watchpoint is found in FAR_EL1. We compare it to the address of each configured watchpoint to see which one was hit. The configured watchpoint addresses are untagged, while the address in FAR_EL1 will have an address tag if the data access was done using a tagged address. The tag needs to be removed to compare the address to the watchpoints. Currently we don't remove it, and as a result can report the wrong watchpoint as being hit (specifically, always either the highest TTBR0 watchpoint or lowest TTBR1 watchpoint). This patch removes the tag. Fixes: d50240a5 ("arm64: mm: permit use of tagged pointers at EL0") Acked-by:
Mark Rutland <mark.rutland@arm.com> Acked-by:
-
Kristina Martsenko authored
commit 81cddd65 upstream. When we emulate userspace cache maintenance in the kernel, we can currently send the task a SIGSEGV even though the maintenance was done on a valid address. This happens if the address has a non-zero address tag, and happens to not be mapped in. When we get the address from a user register, we don't currently remove the address tag before performing cache maintenance on it. If the maintenance faults, we end up in either __do_page_fault, where find_vma can't find the VMA if the address has a tag, or in do_translation_fault, where the tagged address will appear to be above TASK_SIZE. In both cases, the address is not mapped in, and the task is sent a SIGSEGV. This patch removes the tag from the address before using it. With this patch, the fault is handled correctly, the address gets mapped in, and the cache maintenance succeeds. As a second bug, if cache maintenance (correctly) fails on an invalid tagged address, the address gets passed into arm64_notify_segfault, where find_vma fails to find the VMA due to the tag, and the wrong si_code may be sent as part of the siginfo_t of the segfault. With this patch, the correct si_code is sent. Fixes: 7dd01aef ("arm64: trap userspace "dc cvau" cache operation on errata-affected core") Acked-by:
-
Mark Rutland authored
commit a06040d7 upstream. Our access_ok() simply hands its arguments over to __range_ok(), which implicitly assummes that the addr parameter is 64 bits wide. This isn't necessarily true for compat code, which might pass down a 32-bit address parameter. In these cases, we don't have a guarantee that the address has been zero extended to 64 bits, and the upper bits of the register may contain unknown values, potentially resulting in a suprious failure. Avoid this by explicitly casting the addr parameter to an unsigned long (as is done on other architectures), ensuring that the parameter is widened appropriately. Fixes: 0aea86a2 ("arm64: User access library functions") Acked-by:
-
Mark Rutland authored
commit 55de49f9 upstream. Our compat swp emulation holds the compat user address in an unsigned int, which it passes to __user_swpX_asm(). When a 32-bit value is passed in a register, the upper 32 bits of the register are unknown, and we must extend the value to 64 bits before we can use it as a base address. This patch casts the address to unsigned long to ensure it has been suitably extended, avoiding the potential issue, and silencing a related warning from clang. Fixes: bd35a4ad ("arm64: Port SWP/SWPB emulation support from arm") Acked-by:
-
Mark Rutland authored
commit 994870be upstream. When an inline assembly operand's type is narrower than the register it is allocated to, the least significant bits of the register (up to the operand type's width) are valid, and any other bits are permitted to contain any arbitrary value. This aligns with the AAPCS64 parameter passing rules. Our __smp_store_release() implementation does not account for this, and implicitly assumes that operands have been zero-extended to the width of the type being stored to. Thus, we may store unknown values to memory when the value type is narrower than the pointer type (e.g. when storing a char to a long). This patch fixes the issue by casting the value operand to the same width as the pointer operand in all cases, which ensures that the value is zero-extended as we expect. We use the same union trickery as __smp_load_acquire and {READ,WRITE}_ONCE() to avoid GCC complaining that pointers are potentially cast to narrower width integers in unreachable paths. A whitespace issue at the top of __smp_store_release() is also corrected. No changes are necessary for __smp_load_acquire(). Load instructions implicitly clear any upper bits of the register, and the compiler will only consider the least significant bits of the register as valid regardless. Fixes: 47933ad4 ("arch: Introduce smp_load_acquire(), smp_store_release()") Fixes: 878a84d5 ("arm64: add missing data types in smp_load_acquire/smp_store_release") Acked-by:
-
Mark Rutland authored
commit fee960be upstream. The inline assembly in __XCHG_CASE() uses a +Q constraint to hazard against other accesses to the memory location being exchanged. However, the pointer passed to the constraint is a u8 pointer, and thus the hazard only applies to the first byte of the location. GCC can take advantage of this, assuming that other portions of the location are unchanged, as demonstrated with the following test case: union u { unsigned long l; unsigned int i[2]; }; unsigned long update_char_hazard(union u *u) { unsigned int a, b; a = u->i[1]; asm ("str %1, %0" : "+Q" (*(char *)&u->l) : "r" (0UL)); b = u->i[1]; return a ^ b; } unsigned long update_long_hazard(union u *u) { unsigned int a, b; a = u->i[1]; asm ("str %1, %0" : "+Q" (*(long *)&u->l) : "r" (0UL)); b = u->i[1]; return a ^ b; } The linaro 15.08 GCC 5.1.1 toolchain compiles the above as follows when using -O2 or above: 0000000000000000 <update_char_hazard>: 0: d2800001 mov x1, #0x0 // #0 4: f9000001 str x1, [x0] 8: d2800000 mov x0, #0x0 // #0 c: d65f03c0 ret 0000000000000010 <update_long_hazard>: 10: b9400401 ldr w1, [x0,#4] 14: d2800002 mov x2, #0x0 // #0 18: f9000002 str x2, [x0] 1c: b9400400 ldr w0, [x0,#4] 20: 4a000020 eor w0, w1, w0 24: d65f03c0 ret This patch fixes the issue by passing an unsigned long pointer into the +Q constraint, as we do for our cmpxchg code. This may hazard against more than is necessary, but this is better than missing a necessary hazard. Fixes: 305d454a ("arm64: atomics: implement native {relaxed, acquire, release} atomics") Acked-by:
-
Daniel Lezcano authored
commit 0fbdf995 upstream. The MMC hosts could be left in an unconsistent or uninitialized state from the firmware. Instead of assuming, the firmware did the right things, let's reset the host controllers. This change fixes a bug when the mmc2/sdio is initialized leading to a hung task: [ 242.704294] INFO: task kworker/7:1:675 blocked for more than 120 seconds. [ 242.711129] Not tainted 4.9.0-rc8-00017-gcf0251f #3 [ 242.716571] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 242.724435] kworker/7:1 D 0 675 2 0x00000000 [ 242.729973] Workqueue: events_freezable mmc_rescan [ 242.734796] Call trace: [ 242.737269] [<ffff00000808611c>] __switch_to+0xa8/0xb4 [ 242.742437] [<ffff000008d07c04>] __schedule+0x1c0/0x67c [ 242.747689] [<ffff000008d08254>] schedule+0x40/0xa0 [ 242.752594] [<ffff000008d0b284>] schedule_timeout+0x1c4/0x35c [ 242.758366] [<ffff000008d08e38>] wait_for_common+0xd0/0x15c [ 242.763964] [<ffff000008d09008>] wait_for_completion+0x28/0x34 [ 242.769825] [<ffff000008a1a9f4>] mmc_wait_for_req_done+0x40/0x124 [ 242.775949] [<ffff000008a1ab98>] mmc_wait_for_req+0xc0/0xf8 [ 242.781549] [<ffff000008a1ac3c>] mmc_wait_for_cmd+0x6c/0x84 [ 242.787149] [<ffff000008a26610>] mmc_io_rw_direct_host+0x9c/0x114 [ 242.793270] [<ffff000008a26aa0>] sdio_reset+0x34/0x7c [ 242.798347] [<ffff000008a1d46c>] mmc_rescan+0x2fc/0x360 [ ... ] Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by:
Wei Xu <xuwei5@hisilicon.com> Signed-off-by:
-
Leonard Crestez authored
commit d8581c7c upstream. The board file for imx6sx-sdb overrides cpufreq operating points to use higher voltages. This is done because the board has a shared rail for VDD_ARM_IN and VDD_SOC_IN and when using LDO bypass the shared voltage needs to be a value suitable for both ARM and SOC. This only applies to LDO bypass mode, a feature not present in upstream. When LDOs are enabled the effect is to use higher voltages than necessary for no good reason. Setting these higher voltages can make some boards fail to boot with ugly semi-random crashes reminiscent of memory corruption. These failures only happen on board rev. C, rev. B is reported to still work. Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Fixes: 54183bd7 ("ARM: imx6sx-sdb: add revb board and make it default") Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Ludovic Desroches authored
commit d3df1ec0 upstream. Remove ADC channels that are not available by default on the sama5d3_xplained board (resistor not populated) in order to not create confusion. Signed-off-by:
Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Ludovic Desroches authored
commit 9cdd31e5 upstream. The voltage reference for the ADC is not 3V but 3.3V since it is connected to VDDANA. Signed-off-by:
-
Vladimir Murzin authored
commit 6d805949 upstream. We save/restore registers around v7m_invalidate_l1 to address pointed by r12, which is vector table, so the first eight entries are overwritten with a garbage. We already have stack setup at that stage, so use it to save/restore register. Fixes: 6a8146f4 ("ARM: 8609/1: V7M: Add support for the Cortex-M7 processor") Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Jon Medhurst authored
commit b089c31c upstream. To cope with the variety in ARM architectures and configurations, the pagetable attributes for kernel memory are generated at runtime to match the system the kernel finds itself on. This calculated value is stored in pgprot_kernel. However, when early fixmap support was added for ARM (commit a5f4c561) the attributes used for mappings were hard coded because pgprot_kernel is not set up early enough. Unfortunately, when fixmap is used after early boot this means the memory being mapped can have different attributes to existing mappings, potentially leading to unpredictable behaviour. A specific problem also exists due to the hard coded values not include the 'shareable' attribute which means on systems where this matters (e.g. those with multiple CPU clusters) the cache contents for a memory location can become inconsistent between CPUs. To resolve these issues we change fixmap to use the same memory attributes (from pgprot_kernel) that the rest of the kernel uses. To enable this we need to refactor the initialisation code so build_mem_type_table() is called early enough. Note, that relies on early param parsing for memory type overrides passed via the kernel command line, so we need to make sure this call is still after parse_early_params(). [ardb: keep early_fixmap_init() before param parsing, for earlycon] Fixes: a5f4c561 ("ARM: 8415/1: early fixmap support for earlycon") Tested-by:
afzal mohammed <afzal.mohd.ma@gmail.com> Signed-off-by:
Jon Medhurst <tixy@linaro.org> Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
