Set xdp_features flag just for I40E_VSI_MAIN vsi type since XDP is
supported just in this configuration.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/f2b537f86b34fc176fbc6b3d249b46a20a87a2f3.1676405131.git.lorenzo@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In fixed-link setup phylink_parse_fixedlink() unconditionally sets
Pause, Asym_Pause and Autoneg bits to "supported" bitmap, while MAC may
not support these.

This leads to ethtool reporting:

 > Supported pause frame use: Symmetric Receive-only
 > Supports auto-negotiation: Yes

regardless of what is actually supported.

Instead of unconditionally set Pause, Asym_Pause and Autoneg it is
sensible to set them according to validated "supported" bitmap, i.e. the
result of phylink_validate().
Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit e48c414e ("[INET]: Generalise the TCP sock ID lookup routines")
commented out the definition of SOCK_REFCNT_DEBUG in 2005 and later another
commit 463c84b9 ("[NET]: Introduce inet_connection_sock") removed it.
Since we could track all of them through bpf and kprobe related tools
and the feature could print loads of information which might not be
that helpful even under a little bit pressure, the whole feature which
has been inactive for many years is no longer supported.

Link: https://lore.kernel.org/lkml/20230211065153.54116-1-kerneljasonxing@gmail.com/Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 5b4e9a7a ("net: ethtool: extend ringparam set/get APIs for rx_push")
added a new attr for configuring rx-push, right after tx-push.
Add it to the spec, the ring param operation is covered by
the otherwise sparse ethtool spec.
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20230214043246.230518-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Thomas Weißschuh says:

====================
net: make kobj_type structures constant

Since commit ee6d3dd4 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.

Take advantage of this to constify the structure definitions to prevent
modification at runtime.
====================

Link: https://lore.kernel.org/r/20230211-kobj_type-net-v2-0-013b59e59bf3@weissschuh.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit ee6d3dd4 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.

Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Since commit ee6d3dd4 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.

Take advantage of this to constify the structure definition to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Alex Elder says:

====================
net: ipa: define GSI register fields differently

Now that we have "reg" definitions in place to define GSI register
offsets, add the definitions for the fields of GSI registers that
have them.

There aren't many differences between versions, but a few fields are
present only in some versions of IPA, so additional "gsi_reg-vX.Y.c"
files are created to capture such differences.  As in the previous
series, these files are created as near-copies of existing files
just before they're needed to represent these differences.  The
first patch adds files for IPA v4.0, v4.5, and v4.9; the fifth patch
adds a file for IPA v4.11.

Note that the first and fifth patch cause some checkpatch warnings
because they align some continued lines with an open parenthesis
that at the fourth column.
====================

Link: https://lore.kernel.org/r/20230213162229.604438-1-elder@linaro.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Define field IDs for the remaining GSI registers, and populate the
register definition files accordingly.  Use the reg_*() functions to
access field values for those regiters, and get rid of the previous
field definition constants.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The next patch adds a GSI register field that is only valid starting
at IPA v4.11.  Create "gsi_v4.11.c" from "gsi_v4.9.c", changing only
the name of the public regs structure it defines.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Define field IDs for the EV_CH_E_CNTXT_0 and EV_CH_E_CNTXT_8 GSI
registers, and populate the register definition files accordingly.
Use the reg_*() functions to access field values for those regiters,
and get rid of the previous field definition constants.

The remaining EV_CH_E_CNTXT_* registers are written with full 32-bit
values (and have no fields).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Beyond the CH_C_QOS register, two other registers whose offset is
related to channel number have fields within them.

Define the fields within the CH_C_CNTXT_0 GSI register, using an
enumerated type to identify the register's fields, and define an
array of field masks to use for that register's reg structure.

For the CH_C_CNTXT_1 GSI register, ch_c_cntxt_1_length_encode()
previously hid the difference in bit width in the channel ring
length field.  Instead, define a new field CH_R_LENGTH and encode
the ring size with reg_encode().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Define the fields within the CH_C_QOS GSI register using an array of
field masks in that register's reg structure.  Use the reg functions
for encoding values in those fields.

One field in the register is present for IPA v4.0-4.2 only, two
others are present starting at IPA v4.5, and one more is there
starting at IPA v4.9.

Drop the "GSI_" prefix in symbols defined in the gsi_prefetch_mode
enumerated type, and define their values using decimal rather than
hexidecimal values.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Create "gsi_v4.0.c", "gsi_v4.5.c", and "gsi_v4.9.c" as essentially
identical copies of "gsi_v3.5.1.c".  The only difference is the name
of the exported "gsi_regs_vX_Y" structure.  The next patch will
start differentiating them.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The change on network namespace only makes sense during re-init reload
action. For FW activation it is not applicable. So check if user passed
an ATTR indicating network namespace change request and forbid it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230213115836.3404039-1-jiri@resnulli.usSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Completion responses to SEND_RNDIS_PKT messages are currently processed
regardless of the status in the response, so that resources associated
with the request are freed.  While this is appropriate, code bugs that
cause sending a malformed message, or errors on the Hyper-V host, go
undetected. Fix this by checking the status and outputting a rate-limited
message if there is an error.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1676264881-48928-1-git-send-email-mikelley@microsoft.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Oz Shlomo says:

====================
add support for per action hw stats

There are currently two mechanisms for populating hardware stats:
1. Using flow_offload api to query the flow's statistics.
   The api assumes that the same stats values apply to all
   the flow's actions.
   This assumption breaks when action drops or jumps over following
   actions.
2. Using hw_action api to query specific action stats via a driver
   callback method. This api assures the correct action stats for
   the offloaded action, however, it does not apply to the rest of the
   actions in the flow's actions array, as elaborated below.

The current hw_action api does not apply to the following use cases:
1. Actions that are implicitly created by filters (aka bind actions).
   In the following example only one counter will apply to the rule:
   tc filter add dev $DEV prio 2 protocol ip parent ffff: \
        flower ip_proto tcp dst_ip $IP2 \
        action police rate 1mbit burst 100k conform-exceed drop/pipe \
        action mirred egress redirect dev $DEV2

2. Action preceding a hw action.
   In the following example the same flow stats will apply to the sample and
   mirred actions:
    tc action add police rate 1mbit burst 100k conform-exceed drop / pipe
    tc filter add dev $DEV prio 2 protocol ip parent ffff: \
        flower ip_proto tcp dst_ip $IP2 \
        action sample rate 1 group 10 trunc 60 pipe \
        action police index 1 \
        action mirred egress redirect dev $DEV2

3. Meter action using jump control.
   In the following example the same flow stats will apply to both
   mirred actions:
    tc action add police rate 1mbit burst 100k conform-exceed jump 2 / pipe
    tc filter add dev $DEV prio 2 protocol ip parent ffff: \
        flower ip_proto tcp dst_ip $IP2 \
        action police index 1 \
        action mirred egress redirect dev $DEV2
        action mirred egress redirect dev $DEV3

This series provides the platform to query per action stats for in_hw flows.

The first four patches are preparation patches with no functionality change.
The fifth patch re-uses the existing flow action stats api to query action
stats for both classifier and action dumps.
The rest of the patches add per action stats support to the Mellanox driver.
====================

Link: https://lore.kernel.org/r/20230212132520.12571-1-ozsh@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Extend the action stats callback implementation to update stats for actions
that are associated with hw counters.
Note that the callback may be called from tc action utility or from tc
flower. Both apis expect the driver to return the stats difference from
the last update. As such, query the raw counter value and maintain
the diff from the last api call in the tc layer, instead of the fs_core
layer.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently a hardware counter is associated with a flow cookie.
This does not apply to flows using branching action which are required to
return per action stats.

A single counter may apply to multiple actions.
Scan the flow actions in reverse (from the last to the first action) while
caching the last counter.
Associate all the flow attribute tc action cookies with the current
cached counter.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The tc parse action phase translates the tc actions to mlx5 flow
attributes data structure that is used during the flow offload phase.
Currently, the flow offload stage instantiates hw counters while
associating them to flow cookie. However, flows with branching
actions are required to associate a hardware counter with its action
cookies.

Store the parsed tc action cookies on the flow attribute.
Use the list of cookies in the next patch to associate a tc action cookie
with its allocated hw counter.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently a hw count action is appended to the last action of the action
list. However, a branching action may terminate the action list before
reaching the last action.

Append a count action to a branching action.
In the next patches, filters with branching actions will read this counter
when reporting stats per action.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

There are currently two mechanisms for populating hardware stats:
1. Using flow_offload api to query the flow's statistics.
   The api assumes that the same stats values apply to all
   the flow's actions.
   This assumption breaks when action drops or jumps over following
   actions.
2. Using hw_action api to query specific action stats via a driver
   callback method. This api assures the correct action stats for
   the offloaded action, however, it does not apply to the rest of the
   actions in the flow's actions array.

Extend the flow_offload stats callback to indicate that a per action
stats update is required.
Use the existing flow_offload_action api to query the action's hw stats.
In addition, currently the tc action stats utility only updates hw actions.
Reuse the existing action stats cb infrastructure to query any action
stats.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently a hardware action is uniquely identified by the <id, hw_index>
tuple. However, the id is set by the flow_act_setup callback and tc core
cannot enforce this, and it is possible that a future change could break
this. In addition, <id, hw_index> are not unique across network namespaces.

Uniquely identify the action by setting an action cookie by the tc core.
Use the unique action cookie to query the action's hardware stats.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Instead of passing 6 stats related args, pass the flow_stats.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

A single tc pedit action may be translated to multiple flow_offload
actions.
Offload only actions that translate to a single pedit command value.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Currently the hw action stats update is called from tcf_exts_hw_stats_update,
when a tc filter is dumped, and from tcf_action_copy_stats, when a hw
action is dumped.
However, the tcf_action_copy_stats is also called from tcf_action_dump.
As such, the hw action stats update cb is called 3 times for every
tc flower filter dump.

Move the tc action hw stats update from tcf_action_copy_stats to
tcf_dump_walker to update the hw action stats when tc action is dumped.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Fix inaccurate information about PHY muxing, and merge standalone and
multi-chip module MT7530 configuration methods.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230212131258.47551-1-arinc.unal@arinc9.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Eric Dumazet says:

====================
ipv6: more drop reason

Add more drop reasons to IPv6:

 - IPV6_BAD_EXTHDR
 - IPV6_NDISC_FRAG
 - IPV6_NDISC_HOP_LIMIT
 - IPV6_NDISC_BAD_CODE
====================

Link: https://lore.kernel.org/r/20230210184708.2172562-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Creates three new drop reasons:

SKB_DROP_REASON_IPV6_NDISC_FRAG: invalid frag (suppress_frag_ndisc).

SKB_DROP_REASON_IPV6_NDISC_HOP_LIMIT: invalid hop limit.

SKB_DROP_REASON_IPV6_NDISC_BAD_CODE: invalid NDISC icmp6 code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Accurately reports what happened in icmpv6_notify() when handling
a packet.

This makes use of the new IPV6_BAD_EXTHDR drop reason.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

pskb_may_pull() can fail for two different reasons.

Provide pskb_may_pull_reason() helper to distinguish
between these reasons.

It returns:

SKB_NOT_DROPPED_YET           : Success
SKB_DROP_REASON_PKT_TOO_SMALL : packet too small
SKB_DROP_REASON_NOMEM         : skb->head could not be resized
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

This drop reason can be used whenever an IPv6 packet
has a malformed extension header.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

All implementations of the remove callback return 0 unconditionally. So
in dwc_eth_dwmac_remove() there is no error handling necessary. Simplify
accordingly.

This is a preparation for making struct platform_driver::remove return
void, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230211112431.214252-2-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The function returns zero unconditionally. Change it to return void instead
which simplifies some callers as error handing becomes unnecessary.

This also makes it more obvious that most platform remove callbacks always
return zero.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230211112431.214252-1-u.kleine-koenig@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Devices with hardware buffer management do not support XDP, so do not
set xdp_features for them.

Fixes: 66c0e13a ("drivers: net: turn on XDP features")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/19b5838bb3e4515750af822edb2fa5e974d0a86b.1676196230.git.lorenzo@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing ndo_xdp_xmit bit to xdp_features capability flag.

Fixes: 66c0e13a ("drivers: net: turn on XDP features")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/8e3747018f0fd0b5d6e6b9aefe8d9448ca3a3288.1676195726.git.lorenzo@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add missing xsk zero-copy bit to xdp_features capability flag.

Fixes: 66c0e13a ("drivers: net: turn on XDP features")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/c8949baafdf617188dcedb9033ce5a9ca6e9e5ff.1676195440.git.lorenzo@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

dma_alloc_coherent() already clears the allocated memory, there is no need
to explicitly call memset().

Moreover, it is likely that the size in the memset() is incorrect and
should be "size * sizeof(*ring->desc)".
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d5acce7dd108887832c9719f62c7201b4c83b3fb.1676184599.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Set xdp_features netdevice flag if lan966x nic supports xdp mode.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/01f4412f28899d97b0054c9c1a63694201301b42.1676055718.git.lorenzo@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Oleksij Rempel says:

====================
net: add EEE support for KSZ9477 switch family

changes v8:
- fix comment for linkmode_to_mii_eee_cap1_t() function
- add Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
- add Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>

changes v7:
- update documentation for genphy_c45_eee_is_active()
- address review comments on "net: dsa: microchip: enable EEE support"
  patch

changes v6:
- split patch set and send only first 9 patches
- Add Reviewed-by: Andrew Lunn <andrew@lunn.ch>
- use 0xffff instead of GENMASK
- Document @supported_eee
- use "()" with function name in comments

changes v5:
- spell fixes
- move part of genphy_c45_read_eee_abilities() to
  genphy_c45_read_eee_cap1()
- validate MDIO_PCS_EEE_ABLE register against 0xffff val.
- rename *eee_100_10000* to *eee_cap1*
- use linkmode_intersects(phydev->supported, PHY_EEE_CAP1_FEATURES)
  instead of !linkmode_empty()
- add documentation to linkmode/register helpers

changes v4:
- remove following helpers:
  mmd_eee_cap_to_ethtool_sup_t
  mmd_eee_adv_to_ethtool_adv_t
  ethtool_adv_to_mmd_eee_adv_t
  and port drivers from this helpers to linkmode helpers.
- rebase against latest net-next
- port phy_init_eee() to genphy_c45_eee_is_active()

changes v3:
- rework some parts of EEE infrastructure and move it to c45 code.
- add supported_eee storage and start using it in EEE code and by the
  micrel driver.
- add EEE support for ar8035 PHY
- add SmartEEE support to FEC i.MX series.

changes v2:
- use phydev->supported instead of reading MII_BMSR regiaster
- fix @get_eee > @set_eee

With this patch series we provide EEE control for KSZ9477 family of
switches and
AR8035 with i.MX6 configuration.
According to my tests, on a system with KSZ8563 switch and 100Mbit idle
link,
we consume 0,192W less power per port if EEE is enabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>