This function is used for finding the hash seed (which is the same in
all versions of an inode in different snapshots): ff an inode has been
deleted in a child snapshot we need to iterate until we find a live
version.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

It can be useful to know the exact byte offset within a btree node where
an error occured.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

copy_page_from_iter_atomic() will be removed at some point.
Also fixup a comment for folios.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Superblock downgrade entries are only two byte aligned, but section
sizes are 8 byte aligned, which means we have to be careful about
overrun checks; an entry that crosses the end of the section is allowed
(and ignored) as long as it has zero errors.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Reported-by: syzbot+a8074a75b8d73328751e@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

__destroy_new_inode() is appropriate when we have _just_allocated the
inode, but not when it's been fully initialized and on i_sb_list.

Reported-by: syzbot+a0ddc9873c280a4cb18f@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Reported-by: syzbot+c60cd352aedb109528bf@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

the btree key cache uses the srcu struct created/destroyed by
btree_iter.c; btree_iter needs to be exited last.

Reported-by: syzbot+3af9daea347788b15213@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Reported-by: syzbot+84fa6fb8c7f98b93cdea@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Reported-by: syzbot+fff6b0fb00259873576a@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Reported-by: syzbot+d797fe78808e968d6c84@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

verify_replicas_entry() is only for newly created replicas entries -
existing entries on disk may have unknown data types, and we have real
verifiers for them.

Reported-by: syzbot+73414091bd382684ee2b@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes an assertion pop in btree_iter.c that checks for forgetting
to pass a snapshot ID when iterating over snapshots btrees.

Reported-by: syzbot+0dfe05235e38653e2aee@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes missing guards on trying to calculate a checksum with an
invalid/unknown checksum type; moving the guards up to e.g. btree_io.c
might be "more correct", but doesn't buy us anything - an unknown
checksum type will always be flagged as at least a checksum error so we
aren't losing any safety doing it this way and it makes it less likely
to accidentally pop an assert we don't want.

Reported-by: syzbot+e951ad5349f3a34a715a@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Don't put error pointers in bch_fs, that's gross.

This fixes (?) the check in bch2_checksum_type_valid() - depending on
our error paths, or depending on what our error paths are doing it at
least makes the code saner.

Reported-by: syzbot+2e3cb81b5d1fe18a374b@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We additionally need to be going inconsistent if passed an invalid
snapshot ID; that patch will need more thorough testing.

Reported-by: syzbot+1c9fca23fe478633b305@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Reported-by: syzbot+95db43b0a06f157ee865@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

We can't disallow unknown data_types in verify() - we have to preserve
them unchanged for backwards compat; that means we have to add a few
more guards.

Reported-by: syzbot+249018ea545364f78d04@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Reported-by: syzbot+29f65db1a5fe427b5c56@syzkaller.appspotmail.com
Fixes: 55936afe ("bcachefs: Flag btrees with missing data")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Reported-by: syzbot+5c7f715a7107a608a544@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Since commit a2ad63da ("VFS: add FMODE_CAN_ODIRECT file flag") file
systems can just set the FMODE_CAN_ODIRECT flag at open time instead of
wiring up a dummy direct_IO method to indicate support for direct I/O.
Do that for bcachefs so that noop_direct_IO can eventually be removed.

Similar to commit b2943499 ("xfs: set FMODE_CAN_ODIRECT instead of
a dummy direct_IO method").
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Merge tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-mm updates from Andrew Morton:
 "Mainly singleton patches, documented in their respective changelogs.
  Notable series include:

   - Some maintenance and performance work for ocfs2 in Heming Zhao's
     series "improve write IO performance when fragmentation is high".

   - Some ocfs2 bugfixes from Su Yue in the series "ocfs2 bugs fixes
     exposed by fstests".

   - kfifo header rework from Andy Shevchenko in the series "kfifo:
     Clean up kfifo.h".

   - GDB script fixes from Florian Rommel in the series "scripts/gdb:
     Fixes for $lx_current and $lx_per_cpu".

   - After much discussion, a coding-style update from Barry Song
     explaining one reason why inline functions are preferred over
     macros. The series is "codingstyle: avoid unused parameters for a
     function-like macro""

* tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (62 commits)
  fs/proc: fix softlockup in __read_vmcore
  nilfs2: convert BUG_ON() in nilfs_finish_roll_forward() to WARN_ON()
  scripts: checkpatch: check unused parameters for function-like macro
  Documentation: coding-style: ask function-like macros to evaluate parameters
  nilfs2: use __field_struct() for a bitwise field
  selftests/kcmp: remove unused open mode
  nilfs2: remove calls to folio_set_error() and folio_clear_error()
  kernel/watchdog_perf.c: tidy up kerneldoc
  watchdog: allow nmi watchdog to use raw perf event
  watchdog: handle comma separated nmi_watchdog command line
  nilfs2: make superblock data array index computation sparse friendly
  squashfs: remove calls to set the folio error flag
  squashfs: convert squashfs_symlink_read_folio to use folio APIs
  scripts/gdb: fix detection of current CPU in KGDB
  scripts/gdb: make get_thread_info accept pointers
  scripts/gdb: fix parameter handling in $lx_per_cpu
  scripts/gdb: fix failing KGDB detection during probe
  kfifo: don't use "proxy" headers
  media: stih-cec: add missing io.h
  media: rc: add missing io.h
  ...

Pull bcachefs updates from Kent Overstreet:

 - More safety fixes, primarily found by syzbot

 - Run the upgrade/downgrade paths in nochnages mode. Nochanges mode is
   primarily for testing fsck/recovery in dry run mode, so it shouldn't
   change anything besides disabling writes and holding dirty metadata
   in memory.

   The idea here was to reduce the amount of activity if we can't write
   anything out, so that bringing up a filesystem in "super ro" mode
   would be more lilkely to work for data recovery - but norecovery is
   the correct option for this.

 - btree_trans->locked; we now track whether a btree_trans has any btree
   nodes locked, and this is used for improved assertions related to
   trans_unlock() and trans_relock(). We'll also be using it for
   improving how we work with lockdep in the future: we don't want
   lockdep to be tracking individual btree node locks because we take
   too many for lockdep to track, and it's not necessary since we have a
   cycle detector.

 - Trigger improvements that are prep work for online fsck

 - BTREE_TRIGGER_check_repair; this regularizes how we do some repair
   work for extents that goes with running triggers in fsck, and fixes
   some subtle issues with transaction restarts there.

 - bch2_snapshot_equiv() has now been ripped out of fsck.c; snapshot
   equivalence classes are for when snapshot deletion leaves behind
   redundant snapshot nodes, but snapshot deletion now cleans this up
   right away, so the abstraction doesn't need to leak.

 - Improvements to how we resume writing to the journal in recovery. The
   code for picking the new place to write when reading the journal is
   greatly simplified and we also store the position in the superblock
   for when we don't read the journal; this means that we preserve more
   of the journal for list_journal debugging.

 - Improvements to sysfs btree_cache and btree_node_cache, for debugging
   memory reclaim.

 - We now detect when we've blocked for 10 seconds on the allocator in
   the write path and dump some useful info.

 - Safety fixes for devices references: this is a big series that
   changes almost all device lookups to properly check if the device
   exists and take a reference to it.

   Previously we assumed that if a bkey exists that references a device
   then the device must exist, and this was enforced in .invalid
   methods, but this was incorrect because it meant device removal
   relied on accounting being correct to not leave keys pointing to
   invalid devices, and that's not something we can assume.

   Getting the "pointer to invalid device" checks out of our .invalid()
   methods fixes some long standing device removal bugs; the only
   outstanding bug with device removal now is a race between the discard
   path and deleting alloc info, which should be easily fixed.

 - The allocator now prefers not to expand the new
   member_info.btree_allocated bitmap, meaning if repair ever requires
   scanning for btree nodes (because of a corrupt interior nodes) we
   won't have to scan the whole device(s).

 - New coding style document, which among other things talks about the
   correct usage of assertions

* tag 'bcachefs-2024-05-19' of https://evilpiepirate.org/git/bcachefs: (155 commits)
  bcachefs: add no_invalid_checks flag
  bcachefs: add counters for failed shrinker reclaim
  bcachefs: Fix sb_field_downgrade validation
  bcachefs: Plumb bch_validate_flags to sb_field_ops.validate()
  bcachefs: s/bkey_invalid_flags/bch_validate_flags
  bcachefs: fsync() should not return -EROFS
  bcachefs: Invalid devices are now checked for by fsck, not .invalid methods
  bcachefs: kill bch2_dev_bkey_exists() in bch2_check_fix_ptrs()
  bcachefs: kill bch2_dev_bkey_exists() in bch2_read_endio()
  bcachefs: bch2_dev_get_ioref() checks for device not present
  bcachefs: bch2_dev_get_ioref2(); io_read.c
  bcachefs: bch2_dev_get_ioref2(); debug.c
  bcachefs: bch2_dev_get_ioref2(); journal_io.c
  bcachefs: bch2_dev_get_ioref2(); io_write.c
  bcachefs: bch2_dev_get_ioref2(); btree_io.c
  bcachefs: bch2_dev_get_ioref2(); backpointers.c
  bcachefs: bch2_dev_get_ioref2(); alloc_background.c
  bcachefs: for_each_bset() declares loop iter
  bcachefs: Move BCACHEFS_STATFS_MAGIC value to UAPI magic.h
  bcachefs: Improve sysfs internal/btree_cache
  ...

Merge tag 'turbostat-for-Linux-6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux

Pull turbostat updates from Len Brown:

 - Survive sparse die id's seen in Linux-6.9

 - Handle clustered-uncore topology in new/upcoming hardware

 - For non-root use, add ability to see software C-state counters

 - Enable reading core and package hardware cstate via perf, and prefer
   perf over the MSR driver access for these counters

* tag 'turbostat-for-Linux-6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: version 2024.05.10
  tools/power turbostat: Ignore pkg_cstate_limit when it is not available
  tools/power turbostat: Fix order of strings in pkg_cstate_limit_strings
  tools/power turbostat: Read Package-cstates via perf
  tools/power turbostat: Read Core-cstates via perf
  tools/power turbostat: Avoid possible memory corruption due to sparse topology IDs
  tools/power turbostat: Add columns for clustered uncore frequency
  tools/power turbostat: Enable non-privileged users to read sysfs counters
  tools/power turbostat: Replace _Static_assert with BUILD_BUG_ON
  tools/power turbostat: Add ARL-H support
  tools/power turbostat: Enhance ARL/LNL support
  tools/power turbostat: Survive sparse die_id
  tools/power turbostat: Remember global max_die_id
  tools/power turbostat: Harden probe_intel_uncore_frequency()
  tools/power turbostat: Add "snapshot:" Makefile target

Pull kgdb updates from Daniel Thompson:
 "Nine patches this cycle and they split into just three topics:

   - Adopt coccinelle's recommendation to adopt str_plural()

   - A set of seven patches to refactor kdb_read() to improve both code
     clarity and its discipline with respect to fixed size buffers.

     This isn't just a refactor. Between them these also fix a cursor
     movement redraw problem and two buffer overflows (one latent and
     one real, albeit difficult to tickle).

   - Fix an NMI-safety problem when enqueuing kdb's keyboard reset code

  I wrote eight of the nine patches in this collection so many thanks to
  Doug Anderson for the reviews. The changes that affects
  drivers/tty/serial is acked by Greg KH"

* tag 'kgdb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  serial: kgdboc: Fix NMI-safety problems from keyboard reset code
  kdb: Simplify management of tmpbuffer in kdb_read()
  kdb: Replace double memcpy() with memmove() in kdb_read()
  kdb: Use format-specifiers rather than memset() for padding in kdb_read()
  kdb: Merge identical case statements in kdb_read()
  kdb: Fix console handling when editing and tab-completing commands
  kdb: Use format-strings rather than '\0' injection in kdb_read()
  kdb: Fix buffer overflow during tab-complete
  kdb: Use str_plural() to fix Coccinelle warning

Pull x86 fixes from Ingo Molnar:

 - Fix a NOP-patching bug that resulted in valid but suboptimal
   NOP sequences in certain cases

 - Fix build warnings related to fall-through control flow

* tag 'x86-urgent-2024-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternatives: Use the correct length when optimizing NOPs
  x86/boot: Address clang -Wimplicit-fallthrough in vsprintf()
  x86/boot: Add a fallthrough annotation

Pull scheduler fixes from Ingo Molnar:

 - Fix a sched_balance_newidle setting bug

 - Fix bug in the setting of /sys/fs/cgroup/test/cpu.max.burst

 - Fix variable-shadowing build warning

 - Extend sched-domains debug output

 - Fix documentation

 - Fix comments

* tag 'sched-urgent-2024-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Fix incorrect initialization of the 'burst' parameter in cpu_max_write()
  sched/fair: Remove stale FREQUENCY_UTIL comment
  sched/fair: Fix initial util_avg calculation
  docs: cgroup-v1: Clarify that domain levels are system-specific
  sched/debug: Dump domains' level
  sched/fair: Allow disabling sched_balance_newidle with sched_relax_domain_level
  arch/topology: Fix variable naming to avoid shadowing

Pull perf event updates from Ingo Molnar:

 - Extend the x86 instruction decoder with APX and
   other new instructions

 - Misc cleanups

* tag 'perf-urgent-2024-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/cstate: Remove unused 'struct perf_cstate_msr'
  perf/x86/rapl: Rename 'maxdie' to nr_rapl_pmu and 'dieid' to rapl_pmu_idx
  x86/insn: Add support for APX EVEX instructions to the opcode map
  x86/insn: Add support for APX EVEX to the instruction decoder logic
  x86/insn: x86/insn: Add support for REX2 prefix to the instruction decoder opcode map
  x86/insn: Add support for REX2 prefix to the instruction decoder logic
  x86/insn: Add misc new Intel instructions
  x86/insn: Add VEX versions of VPDPBUSD, VPDPBUSDS, VPDPWSSD and VPDPWSSDS
  x86/insn: Fix PUSH instruction in x86 instruction decoder opcode map
  x86/insn: Add Key Locker instructions to the opcode map

Pull mm updates from Andrew Morton:
 "The usual shower of singleton fixes and minor series all over MM,
  documented (hopefully adequately) in the respective changelogs.
  Notable series include:

   - Lucas Stach has provided some page-mapping cleanup/consolidation/
     maintainability work in the series "mm/treewide: Remove pXd_huge()
     API".

   - In the series "Allow migrate on protnone reference with
     MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
     MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
     one test.

   - In their series "Memory allocation profiling" Kent Overstreet and
     Suren Baghdasaryan have contributed a means of determining (via
     /proc/allocinfo) whereabouts in the kernel memory is being
     allocated: number of calls and amount of memory.

   - Matthew Wilcox has provided the series "Various significant MM
     patches" which does a number of rather unrelated things, but in
     largely similar code sites.

   - In his series "mm: page_alloc: freelist migratetype hygiene"
     Johannes Weiner has fixed the page allocator's handling of
     migratetype requests, with resulting improvements in compaction
     efficiency.

   - In the series "make the hugetlb migration strategy consistent"
     Baolin Wang has fixed a hugetlb migration issue, which should
     improve hugetlb allocation reliability.

   - Liu Shixin has hit an I/O meltdown caused by readahead in a
     memory-tight memcg. Addressed in the series "Fix I/O high when
     memory almost met memcg limit".

   - In the series "mm/filemap: optimize folio adding and splitting"
     Kairui Song has optimized pagecache insertion, yielding ~10%
     performance improvement in one test.

   - Baoquan He has cleaned up and consolidated the early zone
     initialization code in the series "mm/mm_init.c: refactor
     free_area_init_core()".

   - Baoquan has also redone some MM initializatio code in the series
     "mm/init: minor clean up and improvement".

   - MM helper cleanups from Christoph Hellwig in his series "remove
     follow_pfn".

   - More cleanups from Matthew Wilcox in the series "Various
     page->flags cleanups".

   - Vlastimil Babka has contributed maintainability improvements in the
     series "memcg_kmem hooks refactoring".

   - More folio conversions and cleanups in Matthew Wilcox's series:
	"Convert huge_zero_page to huge_zero_folio"
	"khugepaged folio conversions"
	"Remove page_idle and page_young wrappers"
	"Use folio APIs in procfs"
	"Clean up __folio_put()"
	"Some cleanups for memory-failure"
	"Remove page_mapping()"
	"More folio compat code removal"

   - David Hildenbrand chipped in with "fs/proc/task_mmu: convert
     hugetlb functions to work on folis".

   - Code consolidation and cleanup work related to GUP's handling of
     hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".

   - Rick Edgecombe has developed some fixes to stack guard gaps in the
     series "Cover a guard gap corner case".

   - Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
     series "mm/ksm: fix ksm exec support for prctl".

   - Baolin Wang has implemented NUMA balancing for multi-size THPs.
     This is a simple first-cut implementation for now. The series is
     "support multi-size THP numa balancing".

   - Cleanups to vma handling helper functions from Matthew Wilcox in
     the series "Unify vma_address and vma_pgoff_address".

   - Some selftests maintenance work from Dev Jain in the series
     "selftests/mm: mremap_test: Optimizations and style fixes".

   - Improvements to the swapping of multi-size THPs from Ryan Roberts
     in the series "Swap-out mTHP without splitting".

   - Kefeng Wang has significantly optimized the handling of arm64's
     permission page faults in the series
	"arch/mm/fault: accelerate pagefault when badaccess"
	"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"

   - GUP cleanups from David Hildenbrand in "mm/gup: consistently call
     it GUP-fast".

   - hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
     path to use struct vm_fault".

   - selftests build fixes from John Hubbard in the series "Fix
     selftests/mm build without requiring "make headers"".

   - Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
     series "Improved Memory Tier Creation for CPUless NUMA Nodes".
     Fixes the initialization code so that migration between different
     memory types works as intended.

   - David Hildenbrand has improved follow_pte() and fixed an errant
     driver in the series "mm: follow_pte() improvements and acrn
     follow_pte() fixes".

   - David also did some cleanup work on large folio mapcounts in his
     series "mm: mapcount for large folios + page_mapcount() cleanups".

   - Folio conversions in KSM in Alex Shi's series "transfer page to
     folio in KSM".

   - Barry Song has added some sysfs stats for monitoring multi-size
     THP's in the series "mm: add per-order mTHP alloc and swpout
     counters".

   - Some zswap cleanups from Yosry Ahmed in the series "zswap
     same-filled and limit checking cleanups".

   - Matthew Wilcox has been looking at buffer_head code and found the
     documentation to be lacking. The series is "Improve buffer head
     documentation".

   - Multi-size THPs get more work, this time from Lance Yang. His
     series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
     optimizes the freeing of these things.

   - Kemeng Shi has added more userspace-visible writeback
     instrumentation in the series "Improve visibility of writeback".

   - Kemeng Shi then sent some maintenance work on top in the series
     "Fix and cleanups to page-writeback".

   - Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
     the series "Improve anon_vma scalability for anon VMAs". Intel's
     test bot reported an improbable 3x improvement in one test.

   - SeongJae Park adds some DAMON feature work in the series
	"mm/damon: add a DAMOS filter type for page granularity access recheck"
	"selftests/damon: add DAMOS quota goal test"

   - Also some maintenance work in the series
	"mm/damon/paddr: simplify page level access re-check for pageout"
	"mm/damon: misc fixes and improvements"

   - David Hildenbrand has disabled some known-to-fail selftests ni the
     series "selftests: mm: cow: flag vmsplice() hugetlb tests as
     XFAIL".

   - memcg metadata storage optimizations from Shakeel Butt in "memcg:
     reduce memory consumption by memcg stats".

   - DAX fixes and maintenance work from Vishal Verma in the series
     "dax/bus.c: Fixups for dax-bus locking""

* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
  memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
  selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
  mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
  mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
  selftests: cgroup: add tests to verify the zswap writeback path
  mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
  mm/damon/core: fix return value from damos_wmark_metric_value
  mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
  selftests: cgroup: remove redundant enabling of memory controller
  Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
  Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
  Docs/mm/damon/design: use a list for supported filters
  Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
  Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
  selftests/damon: classify tests for functionalities and regressions
  selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
  selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
  selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
  mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
  selftests/damon: add a test for DAMOS quota goal
  ...

Pull smb client fix from Steve French:
 "An important fix to address recent netfs regression (data corruption)"

* tag '6.10-rc-smb-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix data corruption in read after invalidate

Pull ext4 updates from Ted Ts'o:

 - more folio conversion patches

 - add support for FS_IOC_GETFSSYSFSPATH

 - mballoc cleaups and add more kunit tests

 - sysfs cleanups and bug fixes

 - miscellaneous bug fixes and cleanups

* tag 'ext4_for_linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
  ext4: fix error pointer dereference in ext4_mb_load_buddy_gfp()
  jbd2: add prefix 'jbd2' for 'shrink_type'
  jbd2: use shrink_type type instead of bool type for __jbd2_journal_clean_checkpoint_list()
  ext4: fix uninitialized ratelimit_state->lock access in __ext4_fill_super()
  ext4: remove calls to to set/clear the folio error flag
  ext4: propagate errors from ext4_sb_bread() in ext4_xattr_block_cache_find()
  ext4: fix mb_cache_entry's e_refcnt leak in ext4_xattr_block_cache_find()
  jbd2: remove redundant assignement to variable err
  ext4: remove the redundant folio_wait_stable()
  ext4: fix potential unnitialized variable
  ext4: convert ac_buddy_page to ac_buddy_folio
  ext4: convert ac_bitmap_page to ac_bitmap_folio
  ext4: convert ext4_mb_init_cache() to take a folio
  ext4: convert bd_buddy_page to bd_buddy_folio
  ext4: convert bd_bitmap_page to bd_bitmap_folio
  ext4: open coding repeated check in next_linear_group
  ext4: use correct criteria name instead stale integer number in comment
  ext4: call ext4_mb_mark_free_simple to free continuous bits in found chunk
  ext4: add test_mb_mark_used_cost to estimate cost of mb_mark_used
  ext4: keep "prefetch_grp" and "nr" consistent
  ...

Pull nfsd updates from Chuck Lever:
 "This is a light release containing mostly optimizations, code clean-
  ups, and minor bug fixes. This development cycle has focused on non-
  upstream kernel work:

   1. Continuing to build upstream CI for NFSD, based on kdevops

   2. Backporting NFSD filecache-related fixes to selected LTS kernels

  One notable new feature in v6.10 NFSD is the addition of a new netlink
  protocol dedicated to configuring NFSD. A new user space tool,
  nfsdctl, is to be added to nfs-utils. Lots more to come here.

  As always I am very grateful to NFSD contributors, reviewers, testers,
  and bug reporters who participated during this cycle"

* tag 'nfsd-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (29 commits)
  NFSD: Force all NFSv4.2 COPY requests to be synchronous
  SUNRPC: Fix gss_free_in_token_pages()
  NFS/knfsd: Remove the invalid NFS error 'NFSERR_OPNOTSUPP'
  knfsd: LOOKUP can return an illegal error value
  nfsd: set security label during create operations
  NFSD: Add COPY status code to OFFLOAD_STATUS response
  NFSD: Record status of async copy operation in struct nfsd4_copy
  SUNRPC: Remove comment for sp_lock
  NFSD: add listener-{set,get} netlink command
  SUNRPC: add a new svc_find_listener helper
  SUNRPC: introduce svc_xprt_create_from_sa utility routine
  NFSD: add write_version to netlink command
  NFSD: convert write_threads to netlink command
  NFSD: allow callers to pass in scope string to nfsd_svc
  NFSD: move nfsd_mutex handling into nfsd_svc callers
  lockd: host: Remove unnecessary statements＇host = NULL;＇
  nfsd: don't create nfsv4recoverydir in nfsdfs when not used.
  nfsd: optimise recalculate_deny_mode() for a common case
  nfsd: add tracepoint in mark_client_expired_locked
  nfsd: new tracepoint for check_slot_seqid
  ...

Pull rdma updates from Jason Gunthorpe:
 "Aside from the usual things this has an arch update for
  __iowrite64_copy() used by the RDMA drivers.

  This API was intended to generate large 64 byte MemWr TLPs on PCI.
  These days most processors had done this by just repeating writel() in
  a loop. S390 and some new ARM64 designs require a special helper to
  get this to generate.

   - Small improvements and fixes for erdma, efa, hfi1, bnxt_re

   - Fix a UAF crash after module unload on leaking restrack entry

   - Continue adding full RDMA support in mana with support for EQs,
     GID's and CQs

   - Improvements to the mkey cache in mlx5

   - DSCP traffic class support in hns and several bug fixes

   - Cap the maximum number of MADs in the receive queue to avoid OOM

   - Another batch of rxe bug fixes from large scale testing

   - __iowrite64_copy() optimizations for write combining MMIO memory

   - Remove NULL checks before dev_put/hold()

   - EFA support for receive with immediate

   - Fix a recent memleaking regression in a cma error path"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (70 commits)
  RDMA/cma: Fix kmemleak in rdma_core observed during blktests nvme/rdma use siw
  RDMA/IPoIB: Fix format truncation compilation errors
  bnxt_re: avoid shift undefined behavior in bnxt_qplib_alloc_init_hwq
  RDMA/efa: Support QP with unsolicited write w/ imm. receive
  IB/hfi1: Remove generic .ndo_get_stats64
  IB/hfi1: Do not use custom stat allocator
  RDMA/hfi1: Use RMW accessors for changing LNKCTL2
  RDMA/mana_ib: implement uapi for creation of rnic cq
  RDMA/mana_ib: boundary check before installing cq callbacks
  RDMA/mana_ib: introduce a helper to remove cq callbacks
  RDMA/mana_ib: create and destroy RNIC cqs
  RDMA/mana_ib: create EQs for RNIC CQs
  RDMA/core: Remove NULL check before dev_{put, hold}
  RDMA/ipoib: Remove NULL check before dev_{put, hold}
  RDMA/mlx5: Remove NULL check before dev_{put, hold}
  RDMA/mlx5: Track DCT, DCI and REG_UMR QPs as diver_detail resources.
  RDMA/core: Add an option to display driver-specific QPs in the rdmatool
  RDMA/efa: Add shutdown notifier
  RDMA/mana_ib: Fix missing ret value
  IB/mlx5: Use __iowrite64_copy() for write combining stores
  ...

Pull HSI update from Sebastian Reichel:

 - convert to platform remove callback returning void

* tag 'hsi-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: omap_ssi_port: Convert to platform remove callback returning void
  HSI: omap_ssi_core: Convert to platform remove callback returning void

Pull power supply and reset updates from Sebastian Reichel:

 - core: simplify POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR handling

 - test-power: add POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR support

 - chrome EC drivers: add ID based probing

 - bq27xxx: simplify update loop to reduce I2C traffic

 - max8903 binding: fix GPIO polarity description

* tag 'for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  dt-bindings: power: supply: max8903: specify flt-gpios as input
  power: supply: bq27xxx: Move health reading out of update loop
  power: supply: bq27xxx: Move cycle count reading out of update loop
  power: supply: bq27xxx: Move energy reading out of update loop
  power: supply: bq27xxx: Move charge reading out of update loop
  power: supply: bq27xxx: Move time reading out of update loop
  power: supply: bq27xxx: Move temperature reading out of update loop
  power: supply: cros_pchg: provide ID table for avoiding fallback match
  power: supply: cros_usbpd: provide ID table for avoiding fallback match
  power: supply: core: simplify charge_behaviour formatting
  power: supply: test-power: implement charge_behaviour property

Pull clk updates from Stephen Boyd:
 "I'm actually surprised this time. There aren't any new Qualcomm SoC
  clk drivers. And there's zero diff in the core clk framework.

  Instead we have new clk drivers for STM and Sophgo, with
  Samsung^WGoogle in third for the diffstat because they introduced HSI0
  and HSI2 clk drivers for Google's GS101 SoC (high speed interface
  things like PCIe, UFS, and MMC).

  Beyond those big diffs there's the usual updates to various clk
  drivers for incorrect parent descriptions or mising
  MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super
  interesting here.

  New Drivers:
   - STM32MP257 SoC clk driver
   - Airoha EN7581 SoC clk driver
   - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver
   - Loongson-2k0500 and Loongson-2k2000 SoC clk driver
   - Add HSI0 and HSI2 clock controllers for Google GS101
   - Add i.MX95 BLK CTL clock driver

  Updates:
   - Allocate clk_ops dynamically for SCMI clk driver
   - Add support in qcom RCG and RCG2 for multiple configurations for
     the same frequency
   - Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve
     issues
   - Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some
     boards
   - Cleanups and fixes for Qualcomm Stromer PLLs
   - Reduce max CPU frequency on Qualcomm APSS IPQ5018
   - Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera
     clk drivers
   - Make Qualcomm MSM8998 Venus clocks functional
   - Cleanup downstream remnants related to DisplayPort across Qualcomm
     SM8450, SM6350, SM8550, and SM8650
   - Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL
   - Use a specific Qualcomm QCS404 compatible for the otherwise generic
     HFPLL
   - Remove Qualcomm SM8150 CPUSS AHB clk as it is unused
   - Remove an unused field in the Qualcomm RPM clk driver
   - Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953
     global clock controller drivers
   - Allow choice of manual or firmware-driven control over PLLs, needed
     to fully implement CPU clock controllers on Exynos850
   - Correct PLL clock IDs on ExynosAutov9
   - Propagate certain clock rates to allow setting proper SPI clock
     rates on Google GS101
   - Mark certain Google GS101 clocks critical
   - Convert old S3C64xx clock controller bindings to DT schema
   - Add new PLL rate and missing mux on Rockchip rk3568
   - Add missing reset line on Rockchip rk3588
   - Removal of an unused field in struct rockchip_mmc_clock
   - Amlogic s4/a1: add regmap maximum register for proper debugfs dump
   - Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers
   - Amlogic pll driver: print clock name on lock error to help debug
   - Amlogic vclk: finish dsi clock path support
   - Amlogic license: fix occurence "GPL v2" as reported by checkpatch
   - Add PM runtime support to i.MX8MP Audiomix
   - Add DT schema for i.MX95 Display Master Block Control
   - Convert to platform remove callback returning void for i.MX8MP
     Audiomix
   - Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas
     R-Car V4M
   - Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five
   - Prepare power domain support for Renesas RZ/G2L family members, and
     add actual support on Renesas RZ/G3S SoC
   - Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas
     R-Car V4M
   - Add additional constraints to Allwinner A64 PLL MIPI clock
   - Fix autoloading sunxi-ng clocks when build as a module"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits)
  clk: samsung: Don't register clkdev lookup for the fixed rate clocks
  clk, reset: microchip: mpfs: fix incorrect preprocessor conditions
  clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs
  clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018
  clk: qcom: Fix SM_GPUCC_8650 dependencies
  clk: qcom: Fix SC_CAMCC_8280XP dependencies
  dt-bindings: clocks: stm32mp25: add access-controllers description
  clock, reset: microchip: move all mpfs reset code to the reset subsystem
  clk: samsung: gs101: drop unused HSI2 clock parent data
  clk: rockchip: rk3568: Add PLL rate for 724 MHz
  clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
  dt-bindings: clock: fixed: Define a preferred node name
  clk: meson: s4: fix module autoloading
  clk: samsung: gs101: mark some apm UASC and XIU clocks critical
  clk: imx: imx8mp: Convert to platform remove callback returning void
  clk: imx: imx8mp: Switch to RUNTIME_PM_OPS()
  clk: bcm: rpi: Assign ->num before accessing ->hws
  clk: bcm: dvp: Assign ->num before accessing ->hws
  clk: samsung: gs101: add support for cmu_hsi2
  clk: samsung: gs101: add support for cmu_hsi0
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Avoid 'constexpr', which is a keyword in C23

 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of
   'dt_binding_check'

 - Fix weak references to avoid GOT entries in position-independent code
   generation

 - Convert the last use of 'optional' property in arch/sh/Kconfig

 - Remove support for the 'optional' property in Kconfig

 - Remove support for Clang's ThinLTO caching, which does not work with
   the .incbin directive

 - Change the semantics of $(src) so it always points to the source
   directory, which fixes Makefile inconsistencies between upstream and
   downstream

 - Fix 'make tar-pkg' for RISC-V to produce a consistent package

 - Provide reasonable default coverage for objtool, sanitizers, and
   profilers

 - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.

 - Remove the last use of tristate choice in drivers/rapidio/Kconfig

 - Various cleanups and fixes in Kconfig

* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
  kconfig: use sym_get_choice_menu() in sym_check_prop()
  rapidio: remove choice for enumeration
  kconfig: lxdialog: remove initialization with A_NORMAL
  kconfig: m/nconf: merge two item_add_str() calls
  kconfig: m/nconf: remove dead code to display value of bool choice
  kconfig: m/nconf: remove dead code to display children of choice members
  kconfig: gconf: show checkbox for choice correctly
  kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
  Makefile: remove redundant tool coverage variables
  kbuild: provide reasonable defaults for tool coverage
  modules: Drop the .export_symbol section from the final modules
  kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
  kconfig: use sym_get_choice_menu() in conf_write_defconfig()
  kconfig: add sym_get_choice_menu() helper
  kconfig: turn defaults and additional prompt for choice members into error
  kconfig: turn missing prompt for choice members into error
  kconfig: turn conf_choice() into void function
  kconfig: use linked list in sym_set_changed()
  kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
  kconfig: gconf: remove debug code
  ...

Pull iommu updates from Joerg Roedel:
 "Core:
   - IOMMU memory usage observability - This will make the memory used
     for IO page tables explicitly visible.
   - Simplify arch_setup_dma_ops()

  Intel VT-d:
   - Consolidate domain cache invalidation
   - Remove private data from page fault message
   - Allocate DMAR fault interrupts locally
   - Cleanup and refactoring

  ARM-SMMUv2:
   - Support for fault debugging hardware on Qualcomm implementations
   - Re-land support for the ->domain_alloc_paging() callback

  ARM-SMMUv3:
   - Improve handling of MSI allocation failure
   - Drop support for the "disable_bypass" cmdline option
   - Major rework of the CD creation code, following on directly from
     the STE rework merged last time around.
   - Add unit tests for the new STE/CD manipulation logic

  AMD-Vi:
   - Final part of SVA changes with generic IO page fault handling

  Renesas IPMMU:
   - Add support for R8A779H0 hardware

  ... and a couple smaller fixes and updates across the sub-tree"

* tag 'iommu-updates-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (80 commits)
  iommu/arm-smmu-v3: Make the kunit into a module
  arm64: Properly clean up iommu-dma remnants
  iommu/amd: Enable Guest Translation after reading IOMMU feature register
  iommu/vt-d: Decouple igfx_off from graphic identity mapping
  iommu/amd: Fix compilation error
  iommu/arm-smmu-v3: Add unit tests for arm_smmu_write_entry
  iommu/arm-smmu-v3: Build the whole CD in arm_smmu_make_s1_cd()
  iommu/arm-smmu-v3: Move the CD generation for SVA into a function
  iommu/arm-smmu-v3: Allocate the CD table entry in advance
  iommu/arm-smmu-v3: Make arm_smmu_alloc_cd_ptr()
  iommu/arm-smmu-v3: Consolidate clearing a CD table entry
  iommu/arm-smmu-v3: Move the CD generation for S1 domains into a function
  iommu/arm-smmu-v3: Make CD programming use arm_smmu_write_entry()
  iommu/arm-smmu-v3: Add an ops indirection to the STE code
  iommu/arm-smmu-qcom: Don't build debug features as a kernel module
  iommu/amd: Add SVA domain support
  iommu: Add ops->domain_alloc_sva()
  iommu/amd: Initial SVA support for AMD IOMMU
  iommu/amd: Add support for enable/disable IOPF
  iommu/amd: Add IO page fault notifier handler
  ...