- 10 Jun, 2016 40 commits
-
-
Florian Westphal authored
commit 63d443ef upstream. batadv_send_skb_to_orig() calls dev_queue_xmit() so we can't use skb->len. Fixes: 95332477 ("batman-adv: network coding - buffer unicast packets before forward") Signed-off-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <a@unstable.cc> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Chuck Lever authored
commit 4b9c7f9d upstream. Commit 176e21ee ("SUNRPC: Support for RPC over AF_LOCAL transports") added a 5-character netid, but did not bump RPCBIND_MAXNETIDLEN from 4 to 5. Fixes: 176e21ee ("SUNRPC: Support for RPC over AF_LOCAL ...") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Richard Alpe authored
commit 03aaaa9b upstream. The publication field of the old netlink API should contain the publication key and not the publication reference. Fixes: 44a8ae94 (tipc: convert legacy nl name table dump to nl compat) Signed-off-by:
Richard Alpe <richard.alpe@ericsson.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Peter Zijlstra authored
commit 2e636d5e upstream. Vikram reported that his ARM64 compiler managed to 'optimize' away the preempt_count manipulations in code like: preempt_enable_no_resched(); put_user(); preempt_disable(); Irrespective of that fact that that is horrible code that should be fixed for many reasons, it does highlight a deficiency in the generic preempt_count manipulators. As it is never right to combine/elide preempt_count manipulations like this. Therefore sprinkle some volatile in the two generic accessors to ensure the compiler is aware of the fact that the preempt_count is observed outside of the regular program-order view and thus cannot be optimized away like this. x86; the only arch not using the generic code is not affected as we do all this in asm in order to use the segment base per-cpu stuff. Reported-by:
Vikram Mulukutla <markivx@codeaurora.org> Tested-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: a7878709 ("sched, arch: Create asm/preempt.h") Link: http://lkml.kernel.org/r/20160516131751.GH3205@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Felix Fietkau authored
commit 9184dc8f upstream. ath79_ddr_pci_win_base has the type void __iomem *, so register offsets need to be a multiple of 4. Cc: Alban Bedel <albeu@free.fr> Fixes: 24b0e3e8 ("MIPS: ath79: Improve the DDR controller interface") Signed-off-by:
Felix Fietkau <nbd@nbd.name> Cc: sergei.shtylyov@cogentembedded.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13258/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Herbert Xu authored
commit 92964c79 upstream. When we free cb->skb after a dump, we do it after releasing the lock. This means that a new dump could have started in the time being and we'll end up freeing their skb instead of ours. This patch saves the skb and module before we unlock so we free the right memory. Fixes: 16b304f3 ("netlink: Eliminate kmalloc in netlink dump operation.") Reported-by:
Baozeng Ding <sploving1@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Prarit Bhargava authored
commit da77b671 upstream. Commit b8941571 ("x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs") marked Home Agent 0 & PCU has having non-compliant BARs. Home Agent 1 also has non-compliant BARs. Mark Home Agent 1 as having non-compliant BARs so the PCI core doesn't touch them. The problem with these devices is documented in the Xeon v4 specification update: BDF2 PCI BARs in the Home Agent Will Return Non-Zero Values During Enumeration Problem: During system initialization the Operating System may access the standard PCI BARs (Base Address Registers). Due to this erratum, accesses to the Home Agent BAR registers (Bus 1; Device 18; Function 0,4; Offsets (0x14-0x24) will return non-zero values. Implication: The operating system may issue a warning. Intel has not observed any functional failures due to this erratum. Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v4-spec-update.html Fixes: b8941571 ("x86/PCI: Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs") Signed-off-by:
Prarit Bhargava <prarit@redhat.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: Thomas Gleixner <tglx@linutronix.de> CC: Ingo Molnar <mingo@redhat.com> CC: "H. Peter Anvin" <hpa@zytor.com> CC: Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
commit b3a834b1 upstream. When this_order variable in blk_mq_init_rq_map() becomes zero the code incorrectly decrements the variable and passes the result to order_to_size() helper causing undefined behaviour: UBSAN: Undefined behaviour in block/blk-mq.c:1459:27 shift exponent 4294967295 is too large for 32-bit type 'unsigned int' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc6-00072-g33656a1f #22 Fix the code by checking this_order variable for not having the zero value first. Reported-by:
Meelis Roos <mroos@linux.ee> Fixes: 320ae51f ("blk-mq: new multi-queue block IO queueing mechanism") Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Dan Carpenter authored
commit 1c306f7f upstream. We removed this initialization but it is required. Let's put it back. Fixes: 895106a5 ('i40e: trivial fixes') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Mark Bloch authored
commit 5ed935e8 upstream. In case ibnl_put_msg fails in send_nlmsg_done, the function returns with -ENOMEM without freeing. This patch fixes this behavior. Fixes: 30dc5e63 ("RDMA/core: Add support for iWARP Port Mapper user space service") Signed-off-by:
Mark Bloch <markb@mellanox.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Reviewed-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Bart Van Assche authored
commit cf1acab7 upstream. pr_debug() already prints prefix PFX. Avoid that PFX is printed twice if the debug statement in srp_add_target() is enabled. Fixes: 34aa654e ("IB/srp: Avoid that I/O hangs due to a cable pull during LUN scanning") Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Laurence Oberman <loberman@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Florian Fainelli authored
commit 80fa40ac upstream. The CPU actually runs at 1405Mhz which gives us a 175625000 Hz MIPS timer frequency (CPU frequency / 8). Fixes: e4c7d009 ("MIPS: BMIPS: Add BCM7435 dtsi") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: linux-mips@linux-mips.org Cc: john@phrozen.org Cc: cernekee@gmail.com Cc: jaedon.shin@gmail.com Patchwork: https://patchwork.linux-mips.org/patch/13132/Signed-off-by:
-
Paul Burton authored
commit ac149698 upstream. The conditions for branching when emulating the BC1EQZ & BC1NEZ instructions were backwards, leading to each of those instructions being treated as the other. Fix this by reversing the conditions, and clear up the code a little for readability & checkpatch. Fixes: c8a34581 ("MIPS: Emulate the BC1{EQ,NE}Z FPU instructions") Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13151/Signed-off-by:
-
Paul Burton authored
commit 93583e17 upstream. The conditions for branching when emulating the BC1EQZ & BC1NEZ instructions were backwards, leading to each of those instructions being treated as the other. Fix this by reversing the conditions, and clear up the code a little for readability & checkpatch. Fixes: c909ca71 ("MIPS: math-emu: Emulate missing BC1{EQ,NE}Z instructions") Signed-off-by:
-
Florian Fainelli authored
commit 37808d62 upstream. Just to ease debugging of multiplatform kernel, make sure we print "Broadcom BMIPS5200" for the BMIPS5200 implementation instead of Broadcom BMIPS5000. Fixes: 68e6a783 ("MIPS: BMIPS: Add PRId for BMIPS5200 (Whirlwind)") Signed-off-by:
-
Florian Fainelli authored
commit f675843d upstream. local_r4k___flush_cache_all() is missing a special check for BMIPS5000 processors, we need to blast the S-cache, just like other MTI processors since we have an inclusive cache. We also need an additional __sync() to make sure this is completed. Fixes: d74b0172 ("MIPS: BMIPS: Add special cache handling in c-r4k.c") Signed-off-by:
-
Florian Fainelli authored
commit 73c4ca04 upstream. BMIPS5000 and BMIPS5200 processor have no D cache aliases, and this is properly handled by the per-CPU override added at the end of r4k_cache_init(), the problem is that the output of probe_pcache() disagrees with that, since this is too late: Primary instruction cache 32kB, VIPT, 4-way, linesize 64 bytes. Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes With the change moved earlier, we now have a consistent output with the settings we are intending to have: Primary instruction cache 32kB, VIPT, 4-way, linesize 64 bytes. Primary data cache 32kB, 4-way, VIPT, no aliases, linesize 32 bytes Fixes: d74b0172 ("MIPS: BMIPS: Add special cache handling in c-r4k.c") Signed-off-by:
-
Florian Fainelli authored
commit c130d2fd upstream. BMIPS5000 and BMIPS52000 processors have their I-cache filling from the D-cache. Since BMIPS_GENERIC does not provide (yet) a cpu-feature-overrides.h file, this was not set anywhere, so make sure the R4K cache detection takes care of that. Fixes: d74b0172 ("MIPS: BMIPS: Add special cache handling in c-r4k.c") Signed-off-by:
-
Lennart Sorensen authored
commit dd217310 upstream. Commit be96f633 ("powerpc: Split out instruction analysis part of emulate_step()") introduced ldarx and stdcx into the instructions in sstep.c, which are not accepted by the assembler on powerpcspe, but does seem to be accepted by the normal powerpc assembler even in 32 bit mode. Wrap these two instructions in a __powerpc64__ check like it is everywhere else in the file. Fixes: be96f633 ("powerpc: Split out instruction analysis part of emulate_step()") Signed-off-by:
Len Sorensen <lsorense@csclub.uwaterloo.ca> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Naveen N. Rao authored
commit f4782207 upstream. On some architectures (powerpc in particular), the number of registers exceeds what can be represented in an integer bitmask. Ensure we generate the proper bitmask on such platforms. Fixes: 71ad0f5e ("perf tools: Support for DWARF CFI unwinding on post processing") Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Heiko Carstens authored
commit c34a6905 upstream. The identity mapping is suboptimal for the last 2GB frame. The mapping will be established with a mix of 4KB and 1MB mappings instead of a single 2GB mapping. This happens because of a off-by-one bug introduced with commit 50be6345 ("s390/mm: Convert bootmem to memblock"). Currently the identity mapping looks like this: 0x0000000080000000-0x0000000180000000 4G PUD RW 0x0000000180000000-0x00000001fff00000 2047M PMD RW 0x00000001fff00000-0x0000000200000000 1M PTE RW With the bug fixed it looks like this: 0x0000000080000000-0x0000000200000000 6G PUD RW Fixes: 50be6345 ("s390/mm: Convert bootmem to memblock") Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Mans Rullgard authored
commit 55e610cd upstream. This lock is already taken in ata_scsi_queuecmd() a few levels up the call stack so attempting to take it here is an error. Moreover, it is pointless in the first place since it only protects a single, atomic assignment. Enabling lock debugging gives the following output: ============================================= [ INFO: possible recursive locking detected ] 4.4.0-rc5+ #189 Not tainted --------------------------------------------- kworker/u2:3/37 is trying to acquire lock: (&(&host->lock)->rlock){-.-...}, at: [<90283294>] sata_dwc_exec_command_by_tag.constprop.14+0x44/0x8c but task is already holding lock: (&(&host->lock)->rlock){-.-...}, at: [<902761ac>] ata_scsi_queuecmd+0x2c/0x330 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&host->lock)->rlock); lock(&(&host->lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u2:3/37: #0: ("events_unbound"){.+.+.+}, at: [<9003a0a4>] process_one_work+0x12c/0x430 #1: ((&entry->work)){+.+.+.}, at: [<9003a0a4>] process_one_work+0x12c/0x430 #2: (&bdev->bd_mutex){+.+.+.}, at: [<9011fd54>] __blkdev_get+0x50/0x380 #3: (&(&host->lock)->rlock){-.-...}, at: [<902761ac>] ata_scsi_queuecmd+0x2c/0x330 stack backtrace: CPU: 0 PID: 37 Comm: kworker/u2:3 Not tainted 4.4.0-rc5+ #189 Workqueue: events_unbound async_run_entry_fn Stack : 90b38e30 00000021 00000003 9b2a6040 00000000 9005f3f0 904fc8dc 00000025 906b96e4 00000000 90528648 9b3336c4 904fc8dc 9009bf18 00000002 00000004 00000000 00000000 9b3336c4 9b3336e4 904fc8dc 9003d074 00000000 90500000 9005e738 00000000 00000000 00000000 00000000 00000000 00000000 00000000 6e657665 755f7374 756f626e 0000646e 00000000 00000000 9b00ca00 9b025000 ... Call Trace: [<90009d6c>] show_stack+0x88/0xa4 [<90057744>] __lock_acquire+0x1ce8/0x2154 [<900583e4>] lock_acquire+0x64/0x8c [<9045ff10>] _raw_spin_lock_irqsave+0x54/0x78 [<90283294>] sata_dwc_exec_command_by_tag.constprop.14+0x44/0x8c [<90283484>] sata_dwc_qc_issue+0x1a8/0x24c [<9026b39c>] ata_qc_issue+0x1f0/0x410 [<90273c6c>] ata_scsi_translate+0xb4/0x200 [<90276234>] ata_scsi_queuecmd+0xb4/0x330 [<9025800c>] scsi_dispatch_cmd+0xd0/0x128 [<90259934>] scsi_request_fn+0x58c/0x638 [<901a3e50>] __blk_run_queue+0x40/0x5c [<901a83d4>] blk_queue_bio+0x27c/0x28c [<901a5914>] generic_make_request+0xf0/0x188 [<901a5a54>] submit_bio+0xa8/0x194 [<9011adcc>] submit_bh_wbc.isra.23+0x15c/0x17c [<9011c908>] block_read_full_page+0x3e4/0x428 [<9009e2e0>] do_read_cache_page+0xac/0x210 [<9009fd90>] read_cache_page+0x18/0x24 [<901bbd18>] read_dev_sector+0x38/0xb0 [<901bd174>] msdos_partition+0xb4/0x5c0 [<901bcb8c>] check_partition+0x140/0x274 [<901bba60>] rescan_partitions+0xa0/0x2b0 [<9011ff68>] __blkdev_get+0x264/0x380 [<901201ac>] blkdev_get+0x128/0x36c [<901b9378>] add_disk+0x3c0/0x4bc [<90268268>] sd_probe_async+0x100/0x224 [<90043a44>] async_run_entry_fn+0x50/0x124 [<9003a11c>] process_one_work+0x1a4/0x430 [<9003a4f4>] worker_thread+0x14c/0x4fc [<900408f4>] kthread+0xd0/0xe8 [<90004338>] ret_from_kernel_thread+0x14/0x1c Fixes: 62936009 ("[libata] Add 460EX on-chip SATA driver, sata_dwc_460ex") Tested-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Chuck Lever authored
commit 11476e9d upstream. At Connectathon 2016, we found that recent upstream Linux clients would occasionally send a LOCK operation with a zero stateid. This appeared to happen in close proximity to another thread returning a delegation before unlinking the same file while it remained open. Earlier, the client received a write delegation on this file and returned the open stateid. Now, as it is getting ready to unlink the file, it returns the write delegation. But there is still an open file descriptor on that file, so the client must OPEN the file again before it returns the delegation. Since commit 24311f88 ('NFSv4: Recovery of recalled read delegations is broken'), nfs_open_delegation_recall() clears the NFS_DELEGATED_STATE flag _before_ it sends the OPEN. This allows a racing LOCK on the same inode to be put on the wire before the OPEN operation has returned a valid open stateid. To eliminate this race, serialize delegation return with the acquisition of a file lock on the same file. Adopt the same approach as is used in the unlock path. This patch also eliminates a similar race seen when sending a LOCK operation at the same time as returning a delegation on the same file. Fixes: 24311f88 ('NFSv4: Recovery of recalled read ... ') Signed-off-by:
-
Florian Fainelli authored
commit cbbda6e7 upstream. BMIPS5000 have a PrID value of 0x5A00 and BMIPS5200 have a PrID value of 0x5B00, which, masked with 0x5A00, returns 0x5A00. Update all conditionals on the PrID to cover both variants since we are going to need this to enable BMIPS5200 SMP. The existing check, masking with 0xFF00 would not cover BMIPS5200 at all. Fixes: 68e6a783 ("MIPS: BMIPS: Add PRId for BMIPS5200 (Whirlwind)") Fixes: 6465460c ("MIPS: BMIPS: change compile time checks to runtime checks") Signed-off-by:
-
Andy Gross authored
commit 2a0974aa upstream. This patch adds the CLK_SET_RATE_PARENT flag for the crypto core and ahb blocks. Without this flag, clk_set_rate can fail for certain frequency requests. Signed-off-by:
Andy Gross <andy.gross@linaro.org> Fixes: 3966fab8 ("clk: qcom: Add MSM8916 Global Clock Controller support") Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Dan Carpenter authored
commit f18ebc21 upstream. The problem with ornamental, do-nothing gotos is that they lead to "forgot to set the error code" bugs. We should be returning -EINVAL here but we don't. It leads to an uninitalized variable in counter_show(): drivers/acpi/sysfs.c:603 counter_show() error: uninitialized symbol 'status'. Fixes: 1c8fce27 (ACPI: introduce drivers/acpi/sysfs.c) Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Sai Gurrappadi authored
commit e43e94c1 upstream. Currently, the userspace governor only updates frequency on GOV_LIMITS if policy->cur falls outside policy->{min/max}. However, it is also necessary to update current frequency on GOV_LIMITS to match the user requested value if it can be achieved within the new policy->{max/min}. This was previously the behaviour in the governor until commit d1922f02 ("cpufreq: Simplify userspace governor") which incorrectly assumed that policy->cur == user requested frequency via scaling_setspeed. This won't be true if the user requested frequency falls outside policy->{min/max}. Ex: a temporary thermal cap throttled the user requested frequency. Fix this by storing the user requested frequency in a seperate variable. The governor will then try to achieve this request on every GOV_LIMITS change. Fixes: d1922f02 (cpufreq: Simplify userspace governor) Signed-off-by:
Sai Gurrappadi <sgurrappadi@nvidia.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Jiri Slaby authored
commit 6798df4c upstream. When csw->con_startup() fails in do_register_con_driver, we return no error (i.e. 0). This was changed back in 2006 by commit 3e795de7. Before that we used to return -ENODEV. So fix the return value to be -ENODEV in that case again. Fixes: 3e795de7 ("VT binding: Add binding/unbinding support for the VT console") Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Reported-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
James Hogan authored
commit 096a8b6d upstream. The argument i of atomic_*_return() operations is given to inline asm with the "bd" constraint, which means "An Op2 register where Op1 is a data unit register and the instruction supports O2R", however Op1 is constrained by "da" which allows an address unit register to be used. Fix the constraint to use "br", meaning "An Op2 register and the instruction supports O2R", i.e. not requiring Op1 to be a data unit register. Fixes: d6dfe250 ("locking,arch,metag: Fold atomic_ops") Signed-off-by:
-
Arnd Bergmann authored
commit 1f62ff34 upstream. dev_dbg_ratelimited() is a macro that ignores its first argument when DEBUG is not set, which can lead to unused variable warnings: ethernet/mellanox/mlxsw/pci.c: In function 'mlxsw_pci_cqe_sdq_handle': ethernet/mellanox/mlxsw/pci.c:646:18: warning: unused variable 'pdev' [-Wunused-variable] ethernet/mellanox/mlxsw/pci.c: In function 'mlxsw_pci_cqe_rdq_handle': ethernet/mellanox/mlxsw/pci.c:671:18: warning: unused variable 'pdev' [-Wunused-variable] The macro already ensures that all its other arguments are silently ignored by the compiler without triggering a warning, through the use of the no_printk() macro, but the dev argument is not passed into that. This changes the definition to use the same trick as no_printk() with an if(0) that leads the compiler to not evaluate the side-effects but still see that 'dev' might not be unused. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Suggested-by:
Andrew Lunn <andrew@lunn.ch> Fixes: 6f586e66 ("driver-core: Shut up dev_dbg_reatelimited() without DEBUG") Reviewed-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit 309124e2 upstream. According to full-history-linux commit d3794f4fa7c3edc3 ("[PATCH] M68k update (part 25)"), port operations are allowed on m68k if CONFIG_ISA is defined. However, commit 153dcc54 ("[PATCH] mem driver: fix conditional on isa i/o support") accidentally changed an "||" into an "&&", disabling it completely on m68k. This logic was retained when introducing the DEVPORT symbol in commit 4f911d64 ("Make /dev/port conditional on config symbol"). Drop the bogus dependency on !M68K to fix this. Fixes: 153dcc54 ("[PATCH] mem driver: fix conditional on isa i/o support") Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
Al Stone <ahs3@redhat.com> Signed-off-by:
-
Nicolas Dichtel authored
commit 570d8e93 upstream. The type TASKSTATS_TYPE_NULL should always be ignored. When jumping to the next attribute, only the length of the current attribute should be added, not the length of all nested attributes. This last bug was not visible before commit 80df5542, because the kernel didn't put more than two nested attributes. Fixes: a3baf649 ("[PATCH] per-task-delay-accounting: documentation") Fixes: 80df5542 ("taskstats: use the libnl API to align nlattr on 64-bit") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Aneesh Kumar K.V authored
commit 3b1dbfa1 upstream. The current code will set _PAGE_USER to the access flags for any fault address, because the ~ operation will be true for all address we take a fault on. But setting _PAGE_USER also means that the fault will be handled only if the page table have _PAGE_USER set. Hence there is no security hole with the current code. Now if it is an user space access, then the change in this patch really don't have an impact because we have (!ctx->kernel) set true and we take the if condition true. Now kernel context created fault on an address in the kernel range will result in a fault loop because we will not insert the hash pte due to access and pte permission mismatch. This patch fix the above issue. Fixes: f204e0b8 ("cxl: Driver code for powernv PCIe based cards for userspace access") Reviewed-by:
Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by:
Ian Munsie <imunsie@au1.ibm.com> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Arnd Bergmann authored
commit 3b9d78a4 upstream. DEBUG_HI3716_UART was supposed to be renamed to DEBUG_HIX5HD2_UART, but accidentally both got left in place, which results in a build error when CONFIG_DEBUG_UART_PHYS is not set as it should be. This removes the old symbol. Signed-off-by:
Wei Xu <xuwei5@hisilicon.com> Signed-off-by:
-
Bjorn Helgaas authored
commit c20e1280 upstream. The alpha pci_mmap_resource() is used for both IORESOURCE_MEM and IORESOURCE_IO resources, but iomem_is_exclusive() is only applicable for IORESOURCE_MEM. Call iomem_is_exclusive() only for IORESOURCE_MEM resources, and do it earlier to match the generic version of pci_mmap_resource(). Fixes: 10a0ef39 ("PCI/alpha: pci sysfs resources") Signed-off-by:
-
Bjorn Helgaas authored
commit ca620723 upstream. iomem_is_exclusive() requires a CPU physical address, but on some arches we supplied a PCI bus address instead. On most arches, pci_resource_to_user(res) returns "res->start", which is a CPU physical address. But on microblaze, mips, powerpc, and sparc, it returns the PCI bus address corresponding to "res->start". The result is that pci_mmap_resource() may fail when it shouldn't (if the bus address happens to match an existing resource), or it may succeed when it should fail (if the resource is exclusive but the bus address doesn't match it). Call iomem_is_exclusive() with "res->start", which is always a CPU physical address, not the result of pci_resource_to_user(). Fixes: e8de1481 ("resource: allow MMIO exclusivity for device drivers") Suggested-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Emmanouil Maroudas authored
commit 993f88f1 upstream. Fix typo in edac_inc_ue_error() to increment ue_noinfo_count instead of ce_noinfo_count. Signed-off-by:
Emmanouil Maroudas <emmanouil.maroudas@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Fixes: 4275be63 ("edac: Change internal representation to work with layers") Link: http://lkml.kernel.org/r/1461425580-5898-1-git-send-email-emmanouil.maroudas@gmail.comSigned-off-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit 53d0fe68 upstream. Before: # perf test -v kallsyms <SNIP> Maps only in vmlinux: ffffffff81d5e000-ffffffff81ec3ac8 115e000 [kernel].init.text ffffffff81ec3ac8-ffffffffa0000000 12c3ac8 [kernel].exit.text ffffffffa0000000-ffffffffa000c000 0 [fjes] ffffffffa000c000-ffffffffa0017000 0 [video] ffffffffa0017000-ffffffffa001c000 0 [grace] <SNIP> ffffffffa0a7f000-ffffffffa0ba5000 0 [xfs] ffffffffa0ba5000-ffffffffffffffff 0 [veth] Maps in vmlinux with a different name in kallsyms: Maps only in kallsyms: ffff880000100000-ffff88001000b000 80000103000 [kernel.kallsyms] ffff88001000b000-ffff880100000000 8001000e000 [kernel.kallsyms] ffff880100000000-ffffc90000000000 80100003000 [kernel.kallsyms] <SNIP> ffffffffa0000000-ffffffffff600000 7fffa0003000 [kernel.kallsyms] ffffffffff600000-ffffffffffffffff 7fffff603000 [kernel.kallsyms] test child finished with -1 ---- end ---- vmlinux symtab matches kallsyms: FAILED! # After: # perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 7058 Looking at the vmlinux_path (8 entries long) Using /lib/modules/4.6.0-rc1+/build/vmlinux for symbols 0xffffffff81076870: diff end addr for aesni_gcm_dec v: 0xffffffff810791f2 k: 0xffffffff81076902 0xffffffff81079200: diff end addr for aesni_gcm_enc v: 0xffffffff8107bb03 k: 0xffffffff81079292 0xffffffff8107e8d0: diff end addr for aesni_gcm_enc_avx_gen2 v: 0xffffffff81083e76 k: 0xffffffff8107e943 0xffffffff81083e80: diff end addr for aesni_gcm_dec_avx_gen2 v: 0xffffffff81089611 k: 0xffffffff81083ef3 0xffffffff81089990: diff end addr for aesni_gcm_enc_avx_gen4 v: 0xffffffff8108e7c4 k: 0xffffffff81089a03 0xffffffff8108e7d0: diff end addr for aesni_gcm_dec_avx_gen4 v: 0xffffffff810937ef k: 0xffffffff8108e843 Maps only in vmlinux: ffffffff81d5e000-ffffffff81ec3ac8 115e000 [kernel].init.text ffffffff81ec3ac8-ffffffffa0000000 12c3ac8 [kernel].exit.text Maps in vmlinux with a different name in kallsyms: Maps only in kallsyms: test child finished with -1 ---- end ---- vmlinux symtab matches kallsyms: FAILED! # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 8e0cf965 ("perf symbols: Add support for reading from /proc/kcore") Link: http://lkml.kernel.org/n/tip-n6vrwt9t89w8k769y349govx@git.kernel.orgSigned-off-by:
-
Lars-Peter Clausen authored
commit 332a5b44 upstream. In the current implementation functionfs generates a EFAULT for async read operations if the read buffer size is larger than the URB data size. Since a application does not necessarily know how much data the host side is going to send it typically supplies a buffer larger than the actual data, which will then result in a EFAULT error. This behaviour was introduced while refactoring the code to use iov_iter interface in commit c993c39b ("gadget/function/f_fs.c: use put iov_iter into io_data"). The original code took the minimum over the URB size and the user buffer size and then attempted to copy that many bytes using copy_to_user(). If copy_to_user() could not copy all data a EFAULT error was generated. Restore the original behaviour by only generating a EFAULT error when the number of bytes copied is not the size of the URB and the target buffer has not been fully filled. Commit 342f39a6 ("usb: gadget: f_fs: fix check in read operation") already fixed the same problem for the synchronous read path. Fixes: c993c39b ("gadget/function/f_fs.c: use put iov_iter into io_data") Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Daniel Borkmann authored
commit 47e27d5e upstream. The original tokenized iid support implemented via f53adae4 ("net: ipv6: add tokenized interface identifier support") didn't allow for clearing a device token as it was intended that this addressing mode was the only one active for globally scoped IPv6 addresses. Later we relaxed that restriction via 617fe29d ("net: ipv6: only invalidate previously tokenized addresses"), and we should also allow for clearing tokens as there's no good reason why it shouldn't be allowed. Fixes: 617fe29d ("net: ipv6: only invalidate previously tokenized addresses") Reported-by:
Robin H. Johnson <robbat2@gentoo.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
