There is an error when an interface has the following conditions:
- PF is in an aggregate (bond)
- PF has VFs created on it
- bond is in a state where it is failed-over to the secondary interface
- A VF reset is issued on one or more of those VFs

The issue is generated by the originating PF trying to rebuild or
reconfigure the VF resources.  Since the bond is failed over to the
secondary interface the queue contexts are in a modified state.

To fix this issue, have the originating interface reclaim its resources
prior to the tear-down and rebuild or reconfigure.  Then after the process
is complete, move the resources back to the currently active interface.

There are multiple paths that can be used depending on what triggered the
event, so create a helper function to move the queues and use paired calls
to the helper (back to origin, process, then move back to active interface)
under the same lag_mutex lock.

Fixes: 1e0f9881 ("ice: Flesh out implementation of support for SRIOV on bonded interface")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://lore.kernel.org/r/20231127212340.1137657-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Johannes Berg says:

====================
wireless fixes:
 - debugfs had a deadlock (removal vs. use of files),
   fixes going through wireless ACKed by Greg
 - support for HT STAs on 320 MHz channels, even if it's
   not clear that should ever happen (that's 6 GHz), best
   not to WARN()
 - fix for the previous CQM fix that broke most cases
 - various wiphy locking fixes
 - various small driver fixes

* tag 'wireless-2023-11-29' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: mac80211: use wiphy locked debugfs for sdata/link
  wifi: mac80211: use wiphy locked debugfs helpers for agg_status
  wifi: cfg80211: add locked debugfs wrappers
  debugfs: add API to allow debugfs operations cancellation
  debugfs: annotate debugfs handlers vs. removal with lockdep
  debugfs: fix automount d_fsdata usage
  wifi: mac80211: handle 320 MHz in ieee80211_ht_cap_ie_to_sta_ht_cap
  wifi: avoid offset calculation on NULL pointer
  wifi: cfg80211: hold wiphy mutex for send_interface
  wifi: cfg80211: lock wiphy mutex for rfkill poll
  wifi: cfg80211: fix CQM for non-range use
  wifi: mac80211: do not pass AP_VLAN vif pointer to drivers during flush
  wifi: iwlwifi: mvm: fix an error code in iwl_mvm_mld_add_sta()
  wifi: mt76: mt7925: fix typo in mt7925_init_he_caps
  wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config
====================

Link: https://lore.kernel.org/r/20231129150809.31083-3-johannes@sipsolutions.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2023-11-30

We've added 5 non-merge commits during the last 7 day(s) which contain
a total of 10 files changed, 66 insertions(+), 15 deletions(-).

The main changes are:

1) Fix AF_UNIX splat from use after free in BPF sockmap,
   from John Fastabend.

2) Fix a syzkaller splat in netdevsim by properly handling offloaded
   programs (and not device-bound ones), from Stanislav Fomichev.

3) Fix bpf_mem_cache_alloc_flags() to initialize the allocation hint,
   from Hou Tao.

4) Fix netkit by rejecting IFLA_NETKIT_PEER_INFO in changelink,
   from Daniel Borkmann.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf, sockmap: Add af_unix test with both sockets in map
  bpf, sockmap: af_unix stream sockets need to hold ref for pair sock
  netkit: Reject IFLA_NETKIT_PEER_INFO in netkit_change_link
  bpf: Add missed allocation hint for bpf_mem_cache_alloc_flags()
  netdevsim: Don't accept device bound programs
====================

Link: https://lore.kernel.org/r/20231129234916.16128-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

This adds a test where both pairs of a af_unix paired socket are put into a
BPF map. This ensures that when we tear down the af_unix pair we don't have
any issues on sockmap side with ordering and reference counting.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20231129012557.95371-3-john.fastabend@gmail.com

AF_UNIX stream sockets are a paired socket. So sending on one of the pairs
will lookup the paired socket as part of the send operation. It is possible
however to put just one of the pairs in a BPF map. This currently increments
the refcnt on the sock in the sockmap to ensure it is not free'd by the
stack before sockmap cleans up its state and stops any skbs being sent/recv'd
to that socket.

But we missed a case. If the peer socket is closed it will be free'd by the
stack. However, the paired socket can still be referenced from BPF sockmap
side because we hold a reference there. Then if we are sending traffic through
BPF sockmap to that socket it will try to dereference the free'd pair in its
send logic creating a use after free. And following splat:

   [59.900375] BUG: KASAN: slab-use-after-free in sk_wake_async+0x31/0x1b0
   [59.901211] Read of size 8 at addr ffff88811acbf060 by task kworker/1:2/954
   [...]
   [59.905468] Call Trace:
   [59.905787]  <TASK>
   [59.906066]  dump_stack_lvl+0x130/0x1d0
   [59.908877]  print_report+0x16f/0x740
   [59.910629]  kasan_report+0x118/0x160
   [59.912576]  sk_wake_async+0x31/0x1b0
   [59.913554]  sock_def_readable+0x156/0x2a0
   [59.914060]  unix_stream_sendmsg+0x3f9/0x12a0
   [59.916398]  sock_sendmsg+0x20e/0x250
   [59.916854]  skb_send_sock+0x236/0xac0
   [59.920527]  sk_psock_backlog+0x287/0xaa0

To fix let BPF sockmap hold a refcnt on both the socket in the sockmap and its
paired socket. It wasn't obvious how to contain the fix to bpf_unix logic. The
primarily problem with keeping this logic in bpf_unix was: In the sock close()
we could handle the deref by having a close handler. But, when we are destroying
the psock through a map delete operation we wouldn't have gotten any signal
thorugh the proto struct other than it being replaced. If we do the deref from
the proto replace its too early because we need to deref the sk_pair after the
backlog worker has been stopped.

Given all this it seems best to just cache it at the end of the psock and eat 8B
for the af_unix and vsock users. Notice dgram sockets are OK because they handle
locking already.

Fixes: 94531cfc ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20231129012557.95371-2-john.fastabend@gmail.com

struct ynl_req_state carries reply-related info from generated code
into generic YNL code. While we don't need reply info to execute
a request without a reply, we still need to pass in the struct, because
it's also where we get the pointer to struct ynl_sock from. Passing NULL
results in crashes if kernel returns an error or an unexpected reply.

Fixes: dc0956c9 ("tools: ynl-gen: move the response reading logic into YNL")
Link: https://lore.kernel.org/r/20231126225858.2144136-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The default dump handler needs to clear ret before returning.
Otherwise if the last interface returns an inconsequential
error this error will propagate to user space.

This may confuse user space (ethtool CLI seems to ignore it,
but YNL doesn't). It will also terminate the dump early
for mutli-skb dump, because netlink core treats EOPNOTSUPP
as a real error.

Fixes: 728480f1 ("ethtool: default handlers for GET requests")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231126225806.2143528-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix races between ravb_tx_timeout_work() and functions of net_device_ops
and ethtool_ops by using rtnl_trylock() and rtnl_unlock(). Note that
since ravb_close() is under the rtnl lock and calls cancel_work_sync(),
ravb_tx_timeout_work() should calls rtnl_trylock(). Otherwise, a deadlock
may happen in ravb_tx_timeout_work() like below:

CPU0			CPU1
			ravb_tx_timeout()
			schedule_work()
...
__dev_close_many()
// Under rtnl lock
ravb_close()
cancel_work_sync()
// Waiting
			ravb_tx_timeout_work()
			rtnl_lock()
			// This is possible to cause a deadlock

If rtnl_trylock() fails, rescheduling the work with sleep for 1 msec.

Fixes: c156633f ("Renesas Ethernet AVB driver proper")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20231127122420.3706751-1-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

ndo_stop() is RTNL-protected by net core, and the worker function takes
RTNL as well. Therefore we will deadlock when trying to execute a
pending work synchronously. To fix this execute any pending work
asynchronously. This will do no harm because netif_running() is false
in ndo_stop(), and therefore the work function is effectively a no-op.
However we have to ensure that no task is running or pending after
rtl_remove_one(), therefore add a call to cancel_work_sync().

Fixes: abe5fc42 ("r8169: use RTNL to protect critical sections")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/12395867-1d17-4cac-aa7d-c691938fcddf@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The original change results in a deadlock if jumbo mtu mode is used.
Reason is that the phydev lock is held when rtl_reset_work() is called
here, and rtl_jumbo_config() calls phy_start_aneg() which also tries
to acquire the phydev lock. Fix this by calling rtl_reset_work()
asynchronously.

Fixes: 621735f5 ("r8169: fix rare issue with broken rx after link-down on RTL8125")
Reported-by: Ian Chen <free122448@hotmail.com>
Tested-by: Ian Chen <free122448@hotmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/caf6a487-ef8c-4570-88f9-f47a659faf33@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Previously, one-element and zero-length arrays were treated as true
flexible arrays, even though they are actually "fake" flex arrays.
The __randomize_layout would leave them untouched at the end of the
struct, similarly to proper C99 flex-array members.

However, this approach changed with commit 1ee60356 ("gcc-plugins:
randstruct: Only warn about true flexible arrays"). Now, only C99
flexible-array members will remain untouched at the end of the struct,
while one-element and zero-length arrays will be subject to randomization.

Fix a `__randomize_layout` crash in `struct neighbour` by transforming
zero-length array `primary_key` into a proper C99 flexible-array member.

Fixes: 1ee60356 ("gcc-plugins: randstruct: Only warn about true flexible arrays")
Closes: https://lore.kernel.org/linux-hardening/20231124102458.GB1503258@e124191.cambridge.arm.com/Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/ZWJoRsJGnCPdJ3+2@workSigned-off-by: Paolo Abeni <pabeni@redhat.com>

TC ingress policer rules depends on interface receive queue
contexts since the bandwidth profiles are attached to RQ
contexts. When an interface is brought down all the queue
contexts are freed. This in turn frees bandwidth profiles in
hardware causing ingress police rules non-functional after
the interface is brought up. Fix this by applying all the ingress
police rules config to hardware in otx2_open. Also allow
adding ingress rules only when interface is running
since no contexts exist for the interface when it is down.

Fixes: 68fbff68 ("octeontx2-pf: Add police action for TC flower")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/1700930217-5707-1-git-send-email-sbhatta@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

When more than 64 VFs are enabled for a PF then mbox communication
between VF and PF is not working as mbox work queueing for few VFs
are skipped due to wrong calculation of VF numbers.

Fixes: d424b6c0 ("octeontx2-pf: Enable SRIOV and added VF mbox handling")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/1700930042-5400-1-git-send-email-sbhatta@marvell.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Commit aeb18dd0 ("net: stmmac: xgmac: Disable MMC interrupts
by default") tries to disable MMC interrupts to avoid a storm of
unhandled interrupts, but leaves the FPE(Frame Preemption) MMC
interrupts enabled, FPE MMC interrupts can cause the same problem.
Now we mask FPE TX and RX interrupts to disable all MMC interrupts.

Fixes: aeb18dd0 ("net: stmmac: xgmac: Disable MMC interrupts by default")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://lore.kernel.org/r/20231125060126.2328690-1-0x1207@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

A loop in rvu_mbox_handler_nix_bandprof_free() contains
a break if (idx == MAX_BANDPROF_PER_PFFUNC),
but if idx may reach MAX_BANDPROF_PER_PFFUNC
buffer '(*req->prof_idx)[layer]' overflow happens before that check.

The patch moves the break to the
beginning of the loop.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: e8e095b3 ("octeontx2-af: cn10k: Bandwidth profiles config support").
Signed-off-by: Elena Salomatkina <elena.salomatkina.cmc@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20231124210802.109763-1-elena.salomatkina.cmc@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Willem de Bruijn says:

====================
selftests/net: fix a few small compiler warnings

Observed a clang warning when backporting cmsg_sender.
Ran the same build against all the .c files under selftests/net.

This is clang-14 with -Wall
Which is what tools/testing/selftests/net/Makefile also enables.
====================

Link: https://lore.kernel.org/r/20231124171645.1011043-1-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Same init_rng() in both tests. The function reads /dev/urandom to
initialize srand(). In case of failure, it falls back onto the
entropy in the uninitialized variable. Not sure if this is on purpose.
But failure reading urandom should be rare, so just fail hard. While
at it, convert to getrandom(). Which man 4 random suggests is simpler
and more robust.

    mptcp_inq.c:525:6:
    mptcp_connect.c:1131:6:

    error: variable 'foo' is used uninitialized
    whenever 'if' condition is false
    [-Werror,-Wsometimes-uninitialized]

Fixes: 048d19d4 ("mptcp: add basic kselftest for mptcp")
Fixes: b5188056 ("selftests: mptcp: add inq test case")
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Willem de Bruijn <willemb@google.com>

----

When input is randomized because this is expected to meaningfully
explore edge cases, should we also add
1. logging the random seed to stdout and
2. adding a command line argument to replay from a specific seed
I can do this in net-next, if authors find it useful in this case.
Reviewed-by: Matthieu Baerts <matttbe@kernel.org>

Link: https://lore.kernel.org/r/20231124171645.1011043-5-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Remove an unused variable.

    diag_uid.c:151:24:
    error: unused variable 'udr'
    [-Werror,-Wunused-variable]

Fixes: ac011361 ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231124171645.1011043-4-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Signedness of char is signed on x86_64, but unsigned on arm64.

Fix the warning building cmsg_sender.c on signed platforms or
forced with -fsigned-char:

    msg_sender.c:455:12:
    error: implicit conversion from 'int' to 'char'
    changes value from 128 to -128
    [-Werror,-Wconstant-conversion]
        buf[0] = ICMPV6_ECHO_REQUEST;

constant ICMPV6_ECHO_REQUEST is 128.

Link: https://lwn.net/Articles/911914
Fixes: de17e305 ("selftests: net: cmsg_sender: support icmp and raw sockets")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231124171645.1011043-3-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Fix a small compiler warning.

nr_process must be a signed long: it is assigned a signed long by
strtol() and is compared against LONG_MIN and LONG_MAX.

ipsec.c:2280:65:
    error: result of comparison of constant -9223372036854775808
    with expression of type 'unsigned int' is always false
    [-Werror,-Wtautological-constant-out-of-range-compare]

  if ((errno == ERANGE && (nr_process == LONG_MAX || nr_process == LONG_MIN))

Fixes: bc2652b7 ("selftest/net/xfrm: Add test for ipsec tunnel")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://lore.kernel.org/r/20231124171645.1011043-2-willemdebruijn.kernel@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The IFLA_NETKIT_PEER_INFO attribute can only be used during device
creation, but not via changelink callback. Hence reject it there.

Fixes: 35dfaad7 ("netkit, bpf: Add bpf programmable net device")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/e86a277a1e8d3b19890312779e42f790b0605ea4.1701115314.git.daniel@iogearbox.netSigned-off-by: Martin KaFai Lau <martin.lau@kernel.org>

The debugfs files for netdevs (sdata) and links are removed
with the wiphy mutex held, which may deadlock. Use the new
wiphy locked debugfs to avoid that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The read is currently with RCU and the write can deadlock,
convert both for the sake of illustration.

Make mac80211 depend on cfg80211 debugfs to get the helpers,
but mac80211 debugfs without it does nothing anyway. This
also required some adjustments in ath9k.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Add wrappers for debugfs files that should be called with
the wiphy mutex held, while the file is also to be removed
under the wiphy mutex. This could otherwise deadlock when
a file is trying to acquire the wiphy mutex while the code
removing it holds the mutex but waits for the removal.

This actually works by pushing the execution of the read
or write handler to a wiphy work that can be cancelled
using the debugfs cancellation API.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In some cases there might be longer-running hardware accesses
in debugfs files, or attempts to acquire locks, and we want
to still be able to quickly remove the files.

Introduce a cancellations API to use inside the debugfs handler
functions to be able to cancel such operations on a per-file
basis.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When you take a lock in a debugfs handler but also try
to remove the debugfs file under that lock, things can
deadlock since the removal has to wait for all users
to finish.

Add lockdep annotations in debugfs_file_get()/_put()
to catch such issues.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

debugfs_create_automount() stores a function pointer in d_fsdata,
but since commit 7c8d4698 ("debugfs: add support for more
elaborate ->d_fsdata") debugfs_release_dentry() will free it, now
conditionally on DEBUGFS_FSDATA_IS_REAL_FOPS_BIT, but that's not
set for the function pointer in automount. As a result, removing
an automount dentry would attempt to free the function pointer.
Luckily, the only user of this (tracing) never removes it.

Nevertheless, it's safer if we just handle the fsdata in one way,
namely either DEBUGFS_FSDATA_IS_REAL_FOPS_BIT or allocated. Thus,
change the automount to allocate it, and use the real_fops in the
data to indicate whether or not automount is filled, rather than
adding a type tag. At least for now this isn't actually needed,
but the next changes will require it.

Also check in debugfs_file_get() that it gets only called
on regular files, just to make things clearer.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

bpf_mem_cache_alloc_flags() may call __alloc() directly when there is no
free object in free list, but it doesn't initialize the allocation hint
for the returned pointer. It may lead to bad memory dereference when
freeing the pointer, so fix it by initializing the allocation hint.

Fixes: 822fb26b ("bpf: Add a hint to allocated objects.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231111043821.2258513-1-houtao@huaweicloud.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Ioana Ciornei says:

====================
dpaa2-eth: various fixes

The first patch fixes a memory corruption issue happening between the Tx
and Tx confirmation of a packet by making the Tx alignment at 64bytes
mandatory instead of optional as it was previously.

The second patch fixes the Rx copybreak code path which recycled the
initial data buffer before all processing was done on the packet.

Changes in v2:
- squashed patches #1 and #2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The blamed commit added support for Rx copybreak. This meant that for
certain frame sizes, a new skb was allocated and the initial data buffer
was recycled. Instead of waiting to recycle the Rx buffer only after all
processing was done on it (like accessing the parse results or timestamp
information), the code path just went ahead and re-used the buffer right
away.

This sometimes lead to corrupted HW and SW annotation areas.
Fix this by delaying the moment when the buffer is recycled.

Fixes: 50f82699 ("dpaa2-eth: add rx copybreak support")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Increase the needed headroom to account for a 64 byte alignment
restriction which, with this patch, we make mandatory on the Tx path.
The case in which the amount of headroom needed is not available is
already handled by the driver which instead sends a S/G frame with the
first buffer only holding the SW and HW annotation areas.

Without this patch, we can empirically see data corruption happening
between Tx and Tx confirmation which sometimes leads to the SW
annotation area being overwritten.

Since this is an old IP where the hardware team cannot help to
understand the underlying behavior, we make the Tx alignment mandatory
for all frames to avoid the crash on Tx conf. Also, remove the comment
that suggested that this is just an optimization.

This patch also sets the needed_headroom net device field to the usual
value that the driver would need on the Tx path:
	- 64 bytes for the software annotation area
	- 64 bytes to account for a 64 byte aligned buffer address

Fixes: 6e2387e8 ("staging: fsl-dpaa2/eth: Add Freescale DPAA2 Ethernet driver")
Closes: https://lore.kernel.org/netdev/aa784d0c-85eb-4e5d-968b-c8f74fa86be6@gin.de/Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As of commit b92143d4 ("net: dsa: mv88e6xxx: add infrastructure for
phylink_pcs") probing of a Marvell 88e6350 switch causes a NULL pointer
de-reference like this example:

    ...
    mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2
    8<--- cut here ---
    Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read
    [00000000] *pgd=00000000
    Internal error: Oops: 5 [#1] ARM
    Modules linked in:
    CPU: 0 PID: 8 Comm: kworker/u2:0 Not tainted 6.7.0-rc2-dirty #26
    Hardware name: Marvell Armada 370/XP (Device Tree)
    Workqueue: events_unbound deferred_probe_work_func
    PC is at mv88e6xxx_port_setup+0x1c/0x44
    LR is at dsa_port_devlink_setup+0x74/0x154
    pc : [<c057ea24>]    lr : [<c0819598>]    psr: a0000013
    sp : c184fce0  ip : c542b8f4  fp : 00000000
    r10: 00000001  r9 : c542a540  r8 : c542bc00
    r7 : c542b838  r6 : c5244580  r5 : 00000005  r4 : c5244580
    r3 : 00000000  r2 : c542b840  r1 : 00000005  r0 : c1a02040
    ...

The Marvell 6350 switch has no SERDES interface and so has no
corresponding pcs_ops defined for it. But during probing a call is made
to mv88e6xxx_port_setup() which unconditionally expects pcs_ops to exist -
though the presence of the pcs_ops->pcs_init function is optional.

Modify code to check for pcs_ops first, before checking for and calling
pcs_ops->pcs_init. Modify checking and use of pcs_ops->pcs_teardown
which may potentially suffer the same problem.

Fixes: b92143d4 ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs")
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

As of commit de5c9bf4 ("net: phylink: require supported_interfaces to
be filled") Marvell 88e6350 switches fail to be probed:

    ...
    mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2
    mv88e6085 d0072004.mdio-mii:11: phylink: error: empty supported_interfaces
    error creating PHYLINK: -22
    mv88e6085: probe of d0072004.mdio-mii:11 failed with error -22
    ...

The problem stems from the use of mv88e6185_phylink_get_caps() to get
the device capabilities. Create a new dedicated phylink_get_caps for the
6351 family (which the 6350 is one of) to properly support their set of
capabilities.

According to chip.h the 6351 switch family includes the 6171, 6175, 6350
and 6351 switches, so update each of these to use the correct
phylink_get_caps.

Fixes: de5c9bf4 ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Greg Ungerer <gerg@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The new 320 MHz channel width wasn't handled, so connecting
a station to a 320 MHz AP would limit the station to 20 MHz
(on HT) after a warning, handle 320 MHz to fix that.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20231109182201.495381-1-greearb@candelatech.com
[write a proper commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211_he_6ghz_oper() can be passed a NULL pointer
and checks for that, but already did the calculation
to inside of it before. Move it after the check.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://lore.kernel.org/r/20231122030237.31276-1-michael-cy.lee@mediatek.com
[rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Given all the locking rework in mac80211, we pretty much
need to get into the driver with the wiphy mutex held in
all callbacks. This is already mostly the case, but as
Johan reported, in the get_txpower it may not be true.

Lock the wiphy mutex around nl80211_send_iface(), then
is also around callers of nl80211_notify_iface(). This
is easy to do, fixes the problem, and aligns the locking
between various calls to it in different parts of the
code of cfg80211.

Fixes: 0e8185ce ("wifi: mac80211: check wiphy mutex in ops")
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/r/ZVOXX6qg4vXEx8dX@hovoldconsulting.comTested-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

We want to guarantee the mutex is held for pretty much
all operations, so ensure that here as well.

Reported-by: syzbot+7e59a5bfc7a897247e18@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

My prior race fix here broke CQM when ranges aren't used, as
the reporting worker now requires the cqm_config to be set in
the wdev, but isn't set when there's no range configured.

Rather than continuing to special-case the range version, set
the cqm_config always and configure accordingly, also tracking
if range was used or not to be able to clear the configuration
appropriately with the same API, which was actually not right
if both were implemented by a driver for some reason, as is
the case with mac80211 (though there the implementations are
equivalent so it doesn't matter.)

Also, the original multiple-RSSI commit lost checking for the
callback, so might have potentially crashed if a driver had
neither implementation, and userspace tried to use it despite
not being advertised as supported.

Cc: stable@vger.kernel.org
Fixes: 4a4b8169 ("cfg80211: Accept multiple RSSI thresholds for CQM")
Fixes: 37c20b2e ("wifi: cfg80211: fix cqm_config access race")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

This fixes WARN_ONs when using AP_VLANs after station removal. The flush
call passed AP_VLAN vif to driver, but because these vifs are virtual and
not registered with drivers, we need to translate to the correct AP vif
first.

Closes: https://github.com/openwrt/openwrt/issues/12420
Fixes: 0b75a1b1 ("wifi: mac80211: flush queues on STA removal")
Fixes: d00800a2 ("wifi: mac80211: add flush_sta method")
Tested-by: Konstantin Demin <rockdrilla@gmail.com>
Tested-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
Link: https://lore.kernel.org/r/20231104141333.3710-1-oldium.pro@gmail.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>

This error path should return -EINVAL instead of success.

Fixes: 57974a55 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/75e4ea09-db58-462f-bd4e-5ad4e5e5dcb5@moroto.mountainSigned-off-by: Johannes Berg <johannes.berg@intel.com>