- 08 Jul, 2012 17 commits
-
-
Richard Zhao authored
- convert to use devm_request_and_ioremap, devm_kzalloc, devm_clk_get, devm_request_irq. - clean up unused variables. Signed-off-by:
Richard Zhao <richard.zhao@freescale.com> Reviewed-by:
Shubhrajyoti D <Shubhrajyoti@ti.com> Signed-off-by:
Wolfram Sang <w.sang@pengutronix.de>
-
Laxman Dewangan authored
Use the devm_* for the memory region allocation, interrupt request, clock handler request. By doing this, it does not require to explicitly free it and hence saving some code. Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by:
-
Laxman Dewangan authored
Adding support for functionality I2C_M_NOSTART. When multiple message transfer request made through i2c and if any message is flagged with I2C_M_NOSTART then it will not send the start/repeat-start and address of that message i.e. sends data directly. Signed-off-by:
-
Laxman Dewangan authored
The Tegra i2c driver supports the I2C_M_IGNORE_NAK and hence returning I2C_FUNC_PROTOCOL_MANGLING as supported functionality. Signed-off-by:
-
Laxman Dewangan authored
The Tegra PPSB (an peripheral bus) queues writes transactions. In order to guarantee that writes have completed before a certain time, a read transaction to a register on the same bus must be executed. This is necessary in situations such as when clearing an interrupt status or enable, so that when returning from an interrupt handler, the HW has already de-asserted its interrupt status output, which will avoid spurious interrupts. Signed-off-by:
-
Neil Brown authored
On a board with OMAP3 processor and TWL4030 Power management, we need to talk to the TWL4030 during late suspend but cannot because the I2C interrupt is disabled (as late suspend disables interrupt). e.g. I get messages like: [ 62.161102] musb-omap2430 musb-omap2430: LATE power domain suspend [ 63.167205] omap_i2c omap_i2c.1: controller timed out [ 63.183044] twl: i2c_read failed to transfer all messages [ 64.182861] omap_i2c omap_i2c.1: controller timed out [ 64.198455] twl: i2c_write failed to transfer all messages [ 65.198455] omap_i2c omap_i2c.1: controller timed out [ 65.203765] twl: i2c_write failed to transfer all messages The stack shows omap2430_runtime_suspend calling twl4030_set_suspend which tries to power-down the USB PHY (twl4030_phy_suspend -> twl4030_phy_power -> __twl4030_phy_power which as a nice WARN_ON that helps). Then we get the same in resume: [ 69.603912] musb-omap2430 musb-omap2430: EARLY power domain resume [ 70.610473] omap_i2c omap_i2c.1: controller timed out [ 70.626129] twl: i2c_write failed to transfer all messages etc. So don't disable interrupts for I2C. Acked-by:
Kevin Hilman <khilman@ti.com> Tested-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Shubhrajyoti D authored
The section number in the recent errata document has changed. Rename the erratum 1p153 to the unique id i462 instead, so that it is easier to reference. Also change the function name and comments to reflect the same. Cc: Jon Hunter <jon-hunter@ti.com> Reviewed-by:
-
Shubhrajyoti D authored
Currently in the 1.153 errata handling, while waiting for transmitter underflow, if NACK is got the XUDF(Transmit underflow) flag is also set. Fix this by setting the XUDF(Transmit underflow) flag after wait for the condition is over. Cc: Alexander Shishkin <virtuoso@slind.org> Acked-by:
Moiz Sonasath <m-sonasath@ti.com> Reviewed-by:
-
Tasslehoff Kjappfot authored
i2c_probe set the dev->errata flag, but omap_i2c_init cleared the flag again. Prevent the overwrite of the errata flags.Move the errata handling to a unified place in probe to prevent such errors. Reviewed-by:
Tasslehoff Kjappfot <tasskjapp@gmail.com> Signed-off-by:
-
Shubhrajyoti D authored
If PM runtime get_sync fails return with the error so that no further reads/writes goes through the interface. This will avoid possible abort. Add a error message in case of failure with the cause of the failure. Reviewed-by:
-
Shubhrajyoti D authored
In omap_i2c_remove we are accessing the I2C_CON register without enabling the clocks. Fix the same by ensure device is accessible by calling pm_runtime_get_sync before accessing the registers and calling pm_runtime_put after accessing. This fixes the following crash. [ 154.723022] ------------[ cut here ]------------ [ 154.725677] WARNING: at arch/arm/mach-omap2/omap_l3_noc.c:112 l3_interrupt_handler+0x1b4/0x1c4() [ 154.725677] L3 custom error: MASTER:MPU TARGET:L4 PER2 [ 154.742614] Modules linked in: i2c_omap(-) [ 154.746948] Backtrace: [ 154.746948] [<c0013078>] (dump_backtrace+0x0/0x110) from [<c026c158>] (dump_stack+0x18/0x1c) [ 154.752716] r6:00000070 r5:c002c43c r4:df9b9e98 r3:df9b8000 [ 154.764465] [<c026c140>] (dump_stack+0x0/0x1c) from [<c0041a2c>] (warn_slowpath_common+0x5c/0x6c) [ 154.768341] [<c00419d0>] (warn_slowpath_common+0x0/0x6c) from [<c0041ae0>] (warn_slowpath_fmt+0x38/0x40) [ 154.776153] r8:00000180 r7:c0361594 r6:c0379b48 r5:00080003 r4:e0838b00 [ 154.790771] r3:00000009 [ 154.791778] [<c0041aa8>] (warn_slowpath_fmt+0x0/0x40) from [<c002c43c>] (l3_interrupt_handler+0x1b4/0x1c4) [ 154.803710] r3:c0361598 r2:c02ef74c [ 154.807403] [<c002c288>] (l3_interrupt_handler+0x0/0x1c4) from [<c0085f44>] (handle_irq_event_percpu+0x58/0 [ 154.818237] r8:0000002a r7:00000000 r6:00000000 r5:df808054 r4:df8893c0 [ 154.825378] [<c0085eec>] (handle_irq_event_percpu+0x0/0x188) from [<c00860b8>] (handle_irq_event+0x44/0x64) [ 154.835662] [<c0086074>] (handle_irq_event+0x0/0x64) from [<c0088ec0>] (handle_fasteoi_irq+0xa4/0x10c) [ 154.845458] r6:0000002a r5:df808054 r4:df808000 r3:c034a150 [ 154.846466] [<c0088e1c>] (handle_fasteoi_irq+0x0/0x10c) from [<c0085ed0>] (generic_handle_irq+0x30/0x38) [ 154.854278] r5:c034aa48 r4:0000002a [ 154.862091] [<c0085ea0>] (generic_handle_irq+0x0/0x38) from [<c000fd38>] (handle_IRQ+0x60/0xc0) [ 154.874450] r4:c034ea70 r3:000001f8 [ 154.878234] [<c000fcd8>] (handle_IRQ+0x0/0xc0) from [<c0008478>] (gic_handle_irq+0x20/0x5c) [ 154.887023] r7:ffffff40 r6:df9b9fb0 r5:c034e2b4 r4:0000001a [ 154.887054] [<c0008458>] (gic_handle_irq+0x0/0x5c) from [<c000ea80>] (__irq_usr+0x40/0x60) [ 154.901153] Exception stack(0xdf9b9fb0 to 0xdf9b9ff8) [ 154.907104] 9fa0: beaf1f04 4006be00 0000000f 0000000c [ 154.915710] 9fc0: 4006c000 00000000 00008034 ffffff40 00000007 00000000 00000000 0007b8d7 [ 154.916778] 9fe0: 00000000 beaf1b68 0000d23c 4005baf0 80000010 ffffffff [ 154.931335] r6:ffffffff r5:80000010 r4:4005baf0 r3:beaf1f04 [ 154.937316] ---[ end trace 1b75b31a2719ed21 ]-- Cc: Rajendra Nayak <rnayak@ti.com> Cc: Linux PM list <linux-pm@vger.kernel.org> Reviewed-by: -
Shubhrajyoti D authored
By definition, wait_for_completion_timeout() returns an unsigned value and therefore, it is not necessary to check if the return value is less than zero as this is not possible. This is based on a patch from Jon Hunter <jon-hunter@ti.com> Changes from his patch - Declare a long as the wait_for_completion_timeout returns long. Original patch is http://git.omapzoom.org/?p=kernel/omap.git;a=commitdiff;h=ea02cece7b0000bc736e60c4188a11aaa74bc6e6Reviewed-by:
Jon Hunter <jon-hunter@ti.com> Signed-off-by:
-
Shubhrajyoti D authored
Currently in probe pm_runtime_put(dev->dev); ... /* i2c device drivers may be active on return from add_adapter() */ adap->nr = pdev->id; r = i2c_add_numbered_adapter(adap); if (r) { dev_err(dev->dev, "failure adding adapter\n"); goto err_free_irq; } ... return 0; err_free_irq: free_irq(dev->irq, dev); err_unuse_clocks: omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); pm_runtime_put(dev->dev); This may access the i2c registers without the clocks in the error cases. Fix the same by moving the pm_runtime_put after the error check. Reviewed-by: -
Shubhrajyoti D authored
On OMAP4 we were writing 1 to IRQENABLE_CLR which cleared only the arbitration lost interrupt. The patch intends to fix the same by writing 0 to the IE register clearing all interrupts. This is based on the work done by Vikram Pandita <vikram.pandita@ti.com>. The changes from the original patch ... - Does not use the IRQENABLE_CLR register to clear as it is not mentioned to be legacy register IRQENABLE_CLR helps in atomically setting/clearing specific interrupts, instead use the OMAP_I2C_IE_REG as we are clearing all interrupts. Cc: Vikram Pandita <vikram.pandita@ti.com> Reviewed-by:
-
Shubhrajyoti D authored
Currently the i2c driver calls the pm_runtime_enable and never the disable. This may cause a warning when pm_runtime_enable checks for the count match.Fix the same by calling pm_runtime_disable in the error and the remove path. Cc: Rajendra Nayak <rnayak@ti.com> Acked-by:
-
Shubhrajyoti D authored
The functions omap_i2c_unidle/idle are called from omap_i2c_runtime_resume and omap_i2c_runtime_suspend which is compiled for CONFIG_PM_RUNTIME. This patch removes the omap_i2c_unidle/idle functions and folds them into the runtime callbacks. This fixes the below warn when CONFIG_PM_RUNTIME is not defined CC arch/arm/mach-omap2/board-ti8168evm.o drivers/i2c/busses/i2c-omap.c:272: warning: 'omap_i2c_unidle' defined but not used drivers/i2c/busses/i2c-omap.c:293: warning: 'omap_i2c_idle' defined but not used CC net/ipv4/ip_forward.o Reviewed-by:
-
Wolfram Sang authored
gpio-i2c describes an I2C controller (using gpios for data and clock), so it must be described in i2c, not gpio. Signed-off-by:
Rob Herring <rob.herring@calxeda.com>
-
- 30 Jun, 2012 13 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Another week, another batch of fixes. All are small, contained, targeted fixes for explicit problems -- mostly build and boot failures across i.MX, OMAP, Renesas/Shmobile and Samsung." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: imx6q: fix suspend regression caused by common clk migration ARM: OMAP4470: Fix OMAP4470 boot failure ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n ARM: shmobile: r8a7779: Route all interrupts to ARM ARM: shmobile: kzm9d: use late init machine hook ARM: shmobile: kzm9g: use late init machine hook ARM: mach-shmobile: armadillo800eva: Use late init machine hook ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: mach-shmobile: add missing GPIO IRQ configuration on mackerel ARM: mach-shmobile: Fix build when SMP is enabled and EMEV2 is not enabled ARM: shmobile: sh7372: bugfix: chclr_offset base ARM: shmobile: sh73a0: bugfix: SY-DMAC number ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
-
Randy Dunlap authored
Fix kernel-doc warnings in printk.c: use correct parameter name. Warning(kernel/printk.c:2429): No description found for parameter 'buf' Warning(kernel/printk.c:2429): Excess function parameter 'line' description in 'kmsg_dump_get_buffer' Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix kernel-doc warning. This struct member was removed in commit 87568264 ("irq: Remove irq_chip->release()") so remove its associated kernel-doc entry also. Warning(include/linux/irq.h:338): Excess struct/union/enum/typedef member 'release' description in 'irq_chip' Signed-off-by:
-
Olof Johansson authored
Merge branch 'v3.5-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes * 'v3.5-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
-
Shawn Guo authored
When moving to common clk framework, the imx6q clks rom and mmdc_ch1_axi get different on/off states than old clk driver, which breaks suspend function. There might be a better way to manage these clocks, but let's takes the old clk driver approach to fix the regression first. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'omap-fixes-for-v3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: "Here's one more regression fix that I missed earlier, and a trivial fix to get omap4470 booting." * tag 'omap-fixes-for-v3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4470: Fix OMAP4470 boot failure ARM: OMAP2+: nand: fix build error when CONFIG_MTD_ONENAND_OMAP2=n
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull ACPI & Power Management patches from Len Brown. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: acpi_pad: fix power_saving thread deadlock ACPI video: Still use ACPI backlight control if _DOS doesn't exist ACPI, APEI, Avoid too much error reporting in runtime ACPI: Add a quirk for "AMILO PRO V2030" to ignore the timer overriding ACPI: Remove one board specific WARN when ignoring timer overriding ACPI: Make acpi_skip_timer_override cover all source_irq==0 cases ACPI, x86: fix Dell M6600 ACPI reboot regression via DMI ACPI sysfs.c strlen fix
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-coreLinus Torvalds authored
Pull driver Core fixes from Greg Kroah-Hartman: "Here is a number of printk() fixes, specifically a few reported by the crazy blog program that ships in SUSE releases (that's "boot log" and not "web log", it predates the general "blog" terminology by many years), and the restoration of the continuation line functionality reported by Stephen and others. Yes, the changes seem a bit big this late in the cycle, but I've been beating on them for a while now, and Stephen has even optimized it a bit, so all looks good to me. The other change in here is a Documentation update for the stable kernel rules describing how some distro patches should be backported, to hopefully drive a bit more response from the distros to the stable kernel releases. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: printk: Optimize if statement logic where newline exists printk: flush continuation lines immediately to console syslog: fill buffer with more than a single message for SYSLOG_ACTION_READ Revert "printk: return -EINVAL if the message len is bigger than the buf size" printk: fix regression in SYSLOG_ACTION_CLEAR stable: Allow merging of backports for serious user-visible performance issues
-
Len Brown authored
Merge branches 'acpi_pad-bugzilla-42981', 'apei-bugzilla-43282', 'video-bugzilla-43168', 'bugzilla-40002' and 'bugfix-misc' into release bug fixes
-
Stuart Hayes authored
The acpi_pad driver can get stuck in destroy_power_saving_task() waiting for kthread_stop() to stop a power_saving thread. The problem is that the isolated_cpus_lock mutex is owned when destroy_power_saving_task() calls kthread_stop(), which waits for a power_saving thread to end, and the power_saving thread tries to acquire the isolated_cpus_lock when it calls round_robin_cpu(). This patch fixes the issue by making round_robin_cpu() use its own mutex. https://bugzilla.kernel.org/show_bug.cgi?id=42981 Cc: stable@vger.kernel.org Signed-off-by:
Stuart Hayes <Stuart_Hayes@Dell.com> Signed-off-by:
Len Brown <len.brown@intel.com>
-
Zhang Rui authored
This fixes a regression in 3.4-rc1 caused by commit ea9f8856 (ACPI video: Harden video bus adding.) Some platforms don't have _DOS control method, but the ACPI backlight still works. We should not invoke _DOS for these platforms. https://bugzilla.kernel.org/show_bug.cgi?id=43168 Cc: Igor Murzov <intergalactic.anonymous@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael J. Wysocki: * Fix for a bug in async suspend error code path causing parents to wait forever for their children in case of a suspend error from Mandeep Singh Baines (-stable metarial). * Fix for a suspend regression related to earlier changes in the ACPI cpuidle driver from Deepthi Dharwar. * tag 'pm-for-3.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / ACPI: Fix suspend/resume regression caused by cpuidle cleanup. PM / Sleep: Prevent waiting forever on asynchronous suspend after abort
-
- 29 Jun, 2012 10 commits
-
-
Steven Rostedt authored
In reviewing Kay's fix up patch: "printk: Have printk() never buffer its data", I found two if statements that could be combined and optimized. Put together the two 'cont.len && cont.owner == current' if statements into a single one, and check if we need to call cont_add(). This also removes the unneeded double cont_flush() calls. Link: http://lkml.kernel.org/r/1340869133.876.10.camel@mopSigned-off-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Benjamin Herrenschmidt: "Here are a few powerpc fixes. Arguably some of this should have come to you earlier but I'm only just catching up after my medical leave. Mostly these fixes regressions, a couple are long standing bugs." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/pseries: Fix software invalidate TCE powerpc: check_and_cede_processor() never cedes powerpc/ftrace: Do not trace restore_interrupts() powerpc: Fix Section mismatch warnings in prom_init.c ppc64: fix missing to check all bits of _TIF_USER_WORK_MASK in preempt powerpc: Fix uninitialised error in numa.c powerpc: Fix BPF_JIT code to link with multiple TOCs
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, cpufeature: Remove stray %s, add -w to mkcapflags.pl x86, cpufeature: Catch duplicate CPU feature strings x86, cpufeature: Rename X86_FEATURE_DTS to X86_FEATURE_DTHERM x86: Fix kernel-doc warnings x86, compat: Use test_thread_flag(TIF_IA32) in compat signal delivery
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull oprofile fixlet from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: oprofile: perf: use NR_CPUS instead or nr_cpumask_bits for static array
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RCU fix from Ingo Molnar. Fixes a bug introduced in this merge window by commit b1420f1c ("Make rcu_barrier() less disruptive") * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Stop rcu_do_batch() from multiplexing the "count" variable
-
Kay Sievers authored
Continuation lines are buffered internally, intended to merge the chunked printk()s into a single record, and to isolate potentially racy continuation users from usual terminated line users. This though, has the effect that partial lines are not printed to the console in the moment they are emitted. In case the kernel crashes in the meantime, the potentially interesting printed information would never reach the consoles. Here we share the continuation buffer with the console copy logic, and partial lines are always immediately flushed to the available consoles. They are still buffered internally to improve the readability and integrity of the messages and minimize the amount of needed record headers to store. Signed-off-by:
Kay Sievers <kay@vrfy.org> Tested-by:
-
Michael Neuling authored
The following added support for powernv but broke pseries/BML: 1f1616e8 powerpc/powernv: Add TCE SW invalidation support TCE_PCI_SW_INVAL was split into FREE and CREATE flags but the tests in the pseries code were not updated to reflect this. Signed-off-by:
Michael Neuling <mikey@neuling.org> cc: stable@kernel.org [v3.3+] Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Anton Blanchard authored
Commit f948501b ("Make hard_irq_disable() actually hard-disable interrupts") caused check_and_cede_processor to stop working. ->irq_happened will never be zero right after a hard_irq_disable so the compiler removes the call to cede_processor completely. The bug was introduced back in the lazy interrupt handling rework of 3.4 but was hidden until recently because hard_irq_disable did nothing. This issue will eventually appear in 3.4 stable since the hard_irq_disable fix is marked stable, so mark this one for stable too. Signed-off-by:
Anton Blanchard <anton@samba.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Steven Rostedt authored
As I was adding code that affects all archs, I started testing function tracer against PPC64 and found that it currently locks up with 3.4 kernel. I figured it was due to tracing a function that shouldn't be, so I went through the following process to bisect to find the culprit: cat /debug/tracing/available_filter_functions > t num=`wc -l t` sed -ne "1,${num}p" t > t1 let num=num+1 sed -ne "${num},$p" t > t2 cat t1 > /debug/tracing/set_ftrace_filter echo function /debug/tracing/current_tracer <failed? bisect t1, if not bisect t2> It finally came down to this function: restore_interrupts() I'm not sure why this locks up the system. It just seems to prevent scheduling from occurring. Interrupts seem to still work, as I can ping the box. But all user processes freeze. When restore_interrupts() is not traced, function tracing works fine. Cc: stable@kernel.org Signed-off-by: -
Li Zhong authored
This patches tries to fix a couple of Section mismatch warnings like following one: WARNING: arch/powerpc/kernel/built-in.o(.text+0x2923c): Section mismatch in reference from the function .prom_query_opal() to the function .init.text:.call_prom() The function .prom_query_opal() references the function __init .call_prom(). This is often because .prom_query_opal lacks a __init annotation or the annotation of .call_prom is wrong. Signed-off-by:
Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by:
-
