USB3 DP PHY on SC7280 is used with SM8250 fallback:

  sc7280-herobrine-evoker.dtb: phy-wrapper@88e9000: compatible: ['qcom,sc7280-qmp-usb3-dp-phy', 'qcom,sm8250-qmp-usb3-dp-phy'] is too long
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221225115944.55425-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

It is more readable to define properties in top-level "properties:" and
restrict them (if needed) per compatible in the "if" block.  Defining
properties in "if" block  does not work correctly with
additionalProperties:false:

  sc7180-trogdor-pazquel-lte-ti.dtb: phy@88e3000: 'qcom,bias-ctrl-value', 'qcom,charge-ctrl-value', 'qcom,hsdisc-trim-value',
    'qcom,imp-res-offset-value', 'qcom,preemphasis-level', 'qcom,preemphasis-width' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221224154226.43417-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Document SoC-specific compatibles with generic fallback (e.g.
qcom,usb-snps-hs-7nm-phy) already used in DTSI.  Add SoC-specific
compatibles for PHY on SDX55 and SDX65.

This disallows usage of the qcom,usb-snps-hs-5nm-phy and
qcom,usb-snps-hs-7nm-phy generic compatibles alone.  Do not touch
remaining two compatibles - qcom,usb-snps-femto-v2-phy and
qcom,sc8180x-usb-hs-phy - because there are no upstream users, so not
sure what was the intention for them.

This fixes warnings like:

  sa8295p-adp.dtb: phy@88e5000: compatible: 'oneOf' conditional failed, one must be fixed:
    ['qcom,sc8280xp-usb-hs-phy', 'qcom,usb-snps-hs-5nm-phy'] is too long
    'qcom,sc8280xp-usb-hs-phy' is not one of ['qcom,sm8150-usb-hs-phy', 'qcom,sm8250-usb-hs-phy', 'qcom,sm8350-usb-hs-phy', 'qcom,sm8450-usb-hs-phy']
    'qcom,usb-snps-hs-7nm-phy' was expected
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221223161835.112079-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Remove retry code in r8a779f0_eth_serdes_init() because
r8a779f0_eth_serdes_chan_setting() was fixed so that no timeout
happened in the initializing procedure.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221226065316.3895480-3-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add r8a779f0_eth_serdes_power_on() to initialize the hardware for
each channel from the step 9 or later on the datasheet. In other words,
the procedure from the step 1 to 8 is for all channel and it is needed
once only. So, the .init() in any channel instance is called, this
driver initializes the hardware from step 1 to 8. And then, .power_on()
is called, this driver initializes the hardware from step 9 or later.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20221226065316.3895480-2-yoshihiro.shimoda.uh@renesas.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Convert Qualcomm USB HSIC PHY bindings to DT schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221222155805.139284-1-krzysztof.kozlowski@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Support role-switch-default-mode property when usb-role-switch is
enabled.
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Link: https://lore.kernel.org/r/20221216042146.99307-1-haotienh@nvidia.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Enable SM6115 / SM4250 USB3 PHY support by adding the
qmp_phy_cfg data. Since this PHY is the same as the
one used on QCM2290, reuse the QCM2290 qmp_phy_cfg data
already available.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20221213122843.454845-4-bhupesh.sharma@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

As per the Qualcomm QMP v3 PHY programming guide document,
QSERDES_V3_RX_UCDR_PI_CONTROLS configuration should be set to an
initial configuration value of 0x80.

Fix the same.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20221213122843.454845-3-bhupesh.sharma@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add dt-bindings for USB3 PHY found on Qualcomm SM6115 / SM4250 SoC.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221213122843.454845-2-bhupesh.sharma@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add compatible string for mt7986.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20230106152845.88717-2-linux@fw-web.deSigned-off-by: Vinod Koul <vkoul@kernel.org>

So far we were assigning some crude "type" (SoC name, really) to each
Allwinner USB PHY model, then guarding certain quirks based on this.
This does not only look weird, but gets more or more cumbersome to
maintain.

Remove the bogus type names altogether, instead introduce flags for each
quirk, and explicitly check for them.
This improves readability, and simplifies future extensions.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230109012223.4079299-4-andre.przywara@arm.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The F1C100s SoC has one USB OTG port connected to a MUSB controller.

Add support for its USB PHY.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20230109012223.4079299-3-andre.przywara@arm.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Allwinner F1C100s has the most simple USB PHY among all Allwinner SoCs,
because it has only one OTG USB controller, no host-only OHCI/EHCI
controllers.

Add a binding document for it. Following the current situation of one
YAML file per SoC, this one is based on
allwinner,sun8i-v3s-usb-phy.yaml, but with OHCI/EHCI-related bits
removed. (The same driver in Linux, phy-sun4i-usb, covers all these
binding files now.)
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20230109012223.4079299-2-andre.przywara@arm.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for the XUSB pad controller found on Tegra234 SoCs. It is
mostly similar to the same IP found on Tegra194, because most of
the Tegra234 XUSB PADCTL registers definition and programming sequence
are the same as Tegra194, Tegra234 XUSB PADCTL can share the same
driver with Tegra186 and Tegra194 XUSB PADCTL.

Introduce a new feature, USB2 HW tracking, for Tegra234.
The feature is to enable HW periodical PAD tracking which measure
and capture the electric parameters of USB2.0 PAD.
Signed-off-by: Sing-Han Chen <singhanc@nvidia.com>
Co-developed-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230111110450.24617-6-jonathanh@nvidia.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Pad tracking is a one-time calibration for Tegra186 and Tegra194.
Clk should be disabled after calibration.

Disable clk after calibration.
While at it add 100us delay for HW recording the calibration value.
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230111110450.24617-5-jonathanh@nvidia.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Remove QMP PHY type-specific headers inclusion from the common header
and move them to the specific PHY drivers to cleanup the namespaces used
by different drivers.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-14-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Drop qcm2290_usb3phy_regs_layout, it is a duplicate of
qmp_v3_usb3phy_regs_layout. Introduce qmp_v5_usb3phy_regs_layout to be
used for sm8350 and sc8280xp.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-13-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use symbolic names for the values inside reg layout arrays. New register
names are added following the PCS register layout that is used by the
particular PHY.

Note: ipq8074 tables appear to use a mixture of v2 and v3 registers.
This might need additional fixes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-12-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

The QPHY_PCS_MISC_TYPEC_CTRL register is not used, remove it from
register layout.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-11-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

The QPHY_PCS_LFPS_RXTERM_IRQ_STATUS register is not used, remove it from
register layout.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-10-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Rename regs layouts to follow the QMP PHY version.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-9-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use symbolic names for the values inside reg layout arrays. New register
names are added following the PCS register layout that is used by the
particular PHY.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-8-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Follow other QMP headers, split and rename UFS-specific PCS registers to
ease comparing regs differences.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-7-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use symbolic names for the values inside reg layout arrays. New register
names are added following the PCS register layout that is used by the
particular PHY.

Note: ipq8074 tables appear to use a mixture of v2 and v3 registers.
This might need additional fixes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-6-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Rename regs layouts to follow the QMP PHY version.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-5-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Use symbolic names for the values inside reg layout arrays.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-4-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Remove duplicate defines from phy-qcom-qmp-qserdes-txrx-v5_5nm.h
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-3-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fix typo in QSERDES_COM_CMN_RSVD5 register definition.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221110192248.873973-2-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Register three UFS symbol clocks (ufs_rx_symbol_0_clk_src,
ufs_rx_symbol_1_clk_src ufs_tx_symbol_0_clk_src). Register OF clock
provider to let other devices link these clocks through the DT.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221123104443.3415267-3-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add #clock-cells property to the QMP UFS PHYs to describe them as clock
providers. The QMP PHY provides rx and tx symbol clocks for the GCC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221123104443.3415267-2-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Register pcie2 PHY as a clock provider to enable using it in the
DT-based clock lookup.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221229115932.3312318-3-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Convert the bindings for the Qualcomm PCIe2 PHY into the YAML format
from the text description.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221229115932.3312318-2-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for a single-lane and two-lane PCIe PHYs found on Qualcomm
SM8350 platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221118233242.2904088-7-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

SM8350 PHY config tables are mostly the same as SM8450 gen3 PHY config
tables. Rename generic tables to remove x1 suffix.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221118233242.2904088-6-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

SM8350 PHY config tables are mostly the same as SM8450 gen3 PHY config
tables. Split these tables to be used by SM8350 config.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221118233242.2904088-5-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add bindings for the PCIe QMP PHYs found on SM8350.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221118233242.2904088-3-dmitry.baryshkov@linaro.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Due to several bugs caused by timers being re-armed after they are
shutdown and just before they are freed, a new state of timers was added
called "shutdown".  After a timer is set to this state, then it can no
longer be re-armed.

The following script was run to find all the trivial locations where
del_timer() or del_timer_sync() is called in the same function that the
object holding the timer is freed.  It also ignores any locations where
the timer->function is modified between the del_timer*() and the free(),
as that is not considered a "trivial" case.

This was created by using a coccinelle script and the following
commands:

    $ cat timer.cocci
    @@
    expression ptr, slab;
    identifier timer, rfield;
    @@
    (
    -       del_timer(&ptr->timer);
    +       timer_shutdown(&ptr->timer);
    |
    -       del_timer_sync(&ptr->timer);
    +       timer_shutdown_sync(&ptr->timer);
    )
      ... when strict
          when != ptr->timer
    (
            kfree_rcu(ptr, rfield);
    |
            kmem_cache_free(slab, ptr);
    |
            kfree(ptr);
    )

    $ spatch timer.cocci . > /tmp/t.patch
    $ patch -p1 < /tmp/t.patch

Link: https://lore.kernel.org/lkml/20221123201306.823305113@linutronix.de/Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Pavel Machek <pavel@ucw.cz> [ LED ]
Acked-by: Kalle Valo <kvalo@kernel.org> [ wireless ]
Acked-by: Paolo Abeni <pabeni@redhat.com> [ networking ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull spi fix from Mark Brown:
 "One driver specific change here which handles the case where a SPI
  device for some reason tries to change the bus speed during a message
  on fsl_spi hardware, this should be very unusual"

* tag 'spi-fix-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: fsl_spi: Don't change speed while chipselect is active