No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull nfsd fixes from Chuck Lever:
 "Bug fixes for NFSD error handling paths"

* tag 'nfsd-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  NFSD: Keep existing listeners on portlist error
  SUNRPC: fix sign error causing rpcsec_gss drops
  nfsd: Fix a warning for nfsd_file_close_inode
  nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zero
  nfsd: fix error handling of register_pernet_subsys() in init_nfsd()

Pull ARM SoC fixes from Arnd Bergmann:
 "This is a larger than normal update for Arm SoC specific code, most of
  it in device trees, but also drivers and the omap and at91/sama7
  platforms:

   - There are four new entries to the MAINTAINERS file: Sven Peter and
     Alyssa Rosenzweig for Apple M1, Romain Perier for Mstar/sigmastar,
     and Vignesh Raghavendra for TI K3

   - Build fixes to address randconfig warnings in sharpsl, dove, omap1,
     and qcom platforms as well as the scmi and op-tee subsystems

   - Regression fixes for missing CONFIG_FB and other options for
     several defconfigs

   - Several bug fixes for the newly added Microchip SAMA7 platform,
     mostly regarding power management

   - Missing SMP barriers to protect accesses to SCMI virtio device

   - Regression fixes for TI OMAP, including a boot-time hang on am335x.

   - Lots of bug fixes for NXP i.MX, mostly addressing incorrect
     settings in devicetree files, and one revert for broken suspend.

   - Fixes for ARM Juno/Vexpress devicetree files, addressing a couple
     of schema warnings.

   - Regression fixes for qualcomm SoC specific drivers and devicetree
     files, reverting an mdt_loader change and at least pastially
     reverting some of the 5.15 DTS changes, plus some minor bugfixes"

* tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (64 commits)
  MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
  MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer
  firmware: arm_scmi: Add proper barriers to scmi virtio device
  firmware: arm_scmi: Simplify spinlocks in virtio transport
  ARM: dts: omap3430-sdp: Fix NAND device node
  bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
  ARM: sharpsl_param: work around -Wstringop-overread warning
  ARM: defconfig: gemini: Restore framebuffer
  ARM: dove: mark 'putc' as inline
  ARM: omap1: move omap15xx local bus handling to usb.c
  MAINTAINERS: Add Vignesh to TI K3 platform maintainership
  arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio
  ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
  arm64: dts: ls1028a: fix eSDHC2 node
  arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2
  ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins
  ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs
  ARM: at91: pm: preload base address of controllers in tlb
  ARM: at91: pm: group constants and addresses loading
  ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail
  ...

Apple SoC fixes for 5.15; just two MAINTAINERS updates.

- MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
- MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer

* tag 'asahi-soc-fixes-5.15' of https://github.com/AsahiLinux/linux:
  MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
  MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer

Link: https://lore.kernel.org/r/a50a9015-0e62-c451-4d0d-668233b35b85@marcan.stSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'scmi-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes

SCMI fixes for v5.15

A few fixes addressing:
- Kconfig dependency between VIRTIO and ARM_SCMI_PROTOCOL
- Link-time error with __exit annotation for virtio_scmi_exit
- Unnecessary nested irqsave/irqrestore spinlocks in virtio transport
- Missing SMP barriers to protect accesses to SCMI virtio device

* tag 'scmi-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: Add proper barriers to scmi virtio device
  firmware: arm_scmi: Simplify spinlocks in virtio transport
  firmware: arm_scmi: Remove __exit annotation
  firmware: arm_scmi: Fix virtio transport Kconfig dependency

Link: https://lore.kernel.org/r/20211007102822.27886-1-sudeep.holla@arm.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes

Fixes for omaps for v5.15

Few regression fixes for omaps for the v5.15-rc cycle. There is a fix
for boot time hangs that can happen on some am335x devices that started
when the pruss devicetree nodes were added. The other fixes are less
critical:

- Fix compiler warning for sysc_init_soc() that got recently introduced

- Fix external abort for am335x pruss as otherwise some am335x will hang

- Use CLKDM_NOAUTO quirk also for dra7 dcan1

- Fix older NAND device node regression for omap3-sdp

* tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap3430-sdp: Fix NAND device node
  bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
  soc: ti: omap-prm: Fix external abort for am335x pruss
  bus: ti-sysc: Add break in switch statement in sysc_init_soc()

Link: https://lore.kernel.org/r/pull-1633609552-789682@atomide.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Pull netfslib, cachefiles and afs fixes from David Howells:

 - Fix another couple of oopses in cachefiles tracing stemming from the
   possibility of passing in a NULL object pointer

 - Fix netfs_clear_unread() to set READ on the iov_iter so that source
   it is passed to doesn't do the wrong thing (some drivers look at the
   flag on iov_iter rather than other available information to determine
   the direction)

 - Fix afs_launder_page() to write back at the correct file position on
   the server so as not to corrupt data

* tag 'misc-fixes-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix afs_launder_page() to set correct start file position
  netfs: Fix READ/WRITE confusion when calling iov_iter_xarray()
  cachefiles: Fix oops with cachefiles_cull() due to NULL object

Merge tag 'perf-tools-fixes-for-v5.15-2021-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix plugin static linking with libopencsd on ARM and ARM64

 - Add missing -lstdc++ when linking with libopencsd

 - Add missing topdown metrics events to 'perf test attr'

 - Plug leak sys_event_tables list after processing JSON vendor events
   entries

 - Sync sound/asound.h copy with the kernel sources

* tag 'perf-tools-fixes-for-v5.15-2021-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf tests attr: Add missing topdown metrics events
  tools include UAPI: Sync sound/asound.h copy with the kernel sources
  perf build: Fix plugin static linking with libopencsd on ARM and ARM64
  perf build: Add missing -lstdc++ when linking with libopencsd
  perf jevents: Free the sys_event_tables list after processing entries

Pull networking fixes from Jakub Kicinski:
 "Including fixes from xfrm, bpf, netfilter, and wireless.

  Current release - regressions:

   - xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting a new
     value in the middle of an enum

   - unix: fix an issue in unix_shutdown causing the other end
     read/write failures

   - phy: mdio: fix memory leak

  Current release - new code bugs:

   - mlx5e: improve MQPRIO resiliency against bad configs

  Previous releases - regressions:

   - bpf: fix integer overflow leading to OOB access in map element
     pre-allocation

   - stmmac: dwmac-rk: fix ethernet on rk3399 based devices

   - netfilter: conntrack: fix boot failure with
     nf_conntrack.enable_hooks=1

   - brcmfmac: revert using ISO3166 country code and 0 rev as fallback

   - i40e: fix freeing of uninitialized misc IRQ vector

   - iavf: fix double unlock of crit_lock

  Previous releases - always broken:

   - bpf, arm: fix register clobbering in div/mod implementation

   - netfilter: nf_tables: correct issues in netlink rule change event
     notifications

   - dsa: tag_dsa: fix mask for trunked packets

   - usb: r8152: don't resubmit rx immediately to avoid soft lockup on
     device unplug

   - i40e: fix endless loop under rtnl if FW fails to correctly respond
     to capability query

   - mlx5e: fix rx checksum offload coexistence with ipsec offload

   - mlx5: force round second at 1PPS out start time and allow it only
     in supported clock modes

   - phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable
     sequence

  Misc:

   - xfrm: slightly rejig the new policy uAPI to make it less cryptic"

* tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
  net: prefer socket bound to interface when not in VRF
  iavf: fix double unlock of crit_lock
  i40e: Fix freeing of uninitialized misc IRQ vector
  i40e: fix endless loop under rtnl
  dt-bindings: net: dsa: marvell: fix compatible in example
  ionic: move filter sync_needed bit set
  gve: report 64bit tx_bytes counter from gve_handle_report_stats()
  gve: fix gve_get_stats()
  rtnetlink: fix if_nlmsg_stats_size() under estimation
  gve: Properly handle errors in gve_assign_qpl
  gve: Avoid freeing NULL pointer
  gve: Correct available tx qpl check
  unix: Fix an issue in unix_shutdown causing the other end read/write failures
  net: stmmac: trigger PCS EEE to turn off on link down
  net: pcs: xpcs: fix incorrect steps on disable EEE
  netlink: annotate data races around nlk->bound
  net: pcs: xpcs: fix incorrect CL37 AN sequence
  net: sfp: Fix typo in state machine debug string
  net/sched: sch_taprio: properly cancel timer from taprio_destroy()
  net: bridge: fix under estimation in br_get_linkxstats_size()
  ...

Merge tag 'hyperv-fixes-signed-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - Replace uuid.h with types.h in a header (Andy Shevchenko)

 - Avoid sleeping in atomic context in PCI driver (Long Li)

 - Avoid sending IPI to self when it shouldn't (Vitaly Kuznetsov)

* tag 'hyperv-fixes-signed-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  x86/hyperv: Avoid erroneously sending IPI to 'self'
  hyper-v: Replace uuid.h with types.h
  PCI: hv: Fix sleep while in non-sleep context when removing child devices from the bus

Hector suggested I should add myself to help him maintain the
platform.
Acked-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Sven Peter <sven@svenpeter.dev>

Add myself as a reviewer for Asahi Linux (Apple M1) patches.

I would like to be CC'ed on Asahi Linux patches for review and testing.
I am also collecting Asahi Linux patches downstream, rebasing on
linux-next periodically, and would like to be notified of what to
cherry-pick from lists.

Cc: Hector Martin <marcan@marcan.st>
Cc: Sven Peter <sven@svenpeter.dev>
Acked-by: Hector Martin <marcan@marcan.st>
Acked-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>

Use 2-factor multiplication argument form devm_kcalloc() instead
of devm_kzalloc().

Link: https://github.com/KSPP/linux/issues/162Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20211006181115.GA913499@embeddedorSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use 2-factor multiplication argument form kcalloc() instead
of kzalloc().

Link: https://github.com/KSPP/linux/issues/162Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20211006180944.GA913477@embeddedorSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use 2-factor multiplication argument form kcalloc() instead
of kzalloc().

Link: https://github.com/KSPP/linux/issues/162Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/20211006180927.GA913456@embeddedorSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use 2-factor multiplication argument form kcalloc() instead
of kzalloc().

Link: https://github.com/KSPP/linux/issues/162Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20211006180843.GA913399@embeddedorSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The commit 6da5b0f0 ("net: ensure unbound datagram socket to be
chosen when not in a VRF") modified compute_score() so that a device
match is always made, not just in the case of an l3mdev skb, then
increments the score also for unbound sockets. This ensures that
sockets bound to an l3mdev are never selected when not in a VRF.
But as unbound and bound sockets are now scored equally, this results
in the last opened socket being selected if there are matches in the
default VRF for an unbound socket and a socket bound to a dev that is
not an l3mdev. However, handling prior to this commit was to always
select the bound socket in this case. Reinstate this handling by
incrementing the score only for bound sockets. The required isolation
due to choosing between an unbound socket and a socket bound to an
l3mdev remains in place due to the device match always being made.
The same approach is taken for compute_score() for stream sockets.

Fixes: 6da5b0f0 ("net: ensure unbound datagram socket to be chosen when not in a VRF")
Fixes: e7819058 ("net: ensure unbound stream socket to be chosen when not in a VRF")
Signed-off-by: Mike Manning <mmanning@vyatta.att-mail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/cf0a8523-b362-1edf-ee78-eef63cbbb428@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2021-10-07

We've added 7 non-merge commits during the last 8 day(s) which contain
a total of 8 files changed, 38 insertions(+), 21 deletions(-).

The main changes are:

1) Fix ARM BPF JIT to preserve caller-saved regs for DIV/MOD JIT-internal
   helper call, from Johan Almbladh.

2) Fix integer overflow in BPF stack map element size calculation when
   used with preallocation, from Tatsuhiko Yasumatsu.

3) Fix an AF_UNIX regression due to added BPF sockmap support related
   to shutdown handling, from Jiang Wang.

4) Fix a segfault in libbpf when generating light skeletons from objects
   without BTF, from Kumar Kartikeya Dwivedi.

5) Fix a libbpf memory leak in strset to free the actual struct strset
   itself, from Andrii Nakryiko.

6) Dual-license bpf_insn.h similarly as we did for libbpf and bpftool,
   with ACKs from all contributors, from Luca Boccassi.
====================

Link: https://lore.kernel.org/r/20211007135010.21143-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'wireless-drivers-next-2021-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.16

First set of patches for v5.16. ath11k getting most of new features
this time. Other drivers also have few new features, and of course the
usual set of fixes and cleanups all over.

Major changes:

rtw88

* support adaptivity for ETSI/JP DFS region

* 8821c: support RFE type4 wifi NIC

brcmfmac

* DMI nvram filename quirk for Cyberbook T116 tablet

ath9k

* load calibration data and pci init values via nvmem subsystem

ath11k

* include channel rx and tx time in survey dump statistics

* support for setting fixed Wi-Fi 6 rates from user space

* support for 80P80 and 160 MHz bandwidths

* spectral scan support for QCN9074

* support for calibration data files per radio

* support for calibration data via eeprom

* support for rx decapsulation offload (data frames in 802.3 format)

* support channel 2 in 6 GHz band

ath10k

* include frame time stamp in beacon and probe response frames

wcn36xx

* enable Idle Mode Power Save (IMPS) to reduce power consumption during idle
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net: add a helpers for loading netdev->dev_addr from FW

We're trying to make all writes to netdev->dev_addr go via helpers.
A lot of places pass netdev->dev_addr to of_get_ethdev_address() and
device_get_ethdev_addr() so this set adds new functions which wrap
the functionality.

v2 performs suggested code moves, adds a couple additional clean ups
on the device property side, and an extra patch converting drivers
which can benefit from device_get_ethdev_address().

v3 removes OF_NET and corrects kdoc.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert a few drivers to device_get_ethdev_address(),
saving a few LoC.

The check if addr is valid in netsec is superfluous,
device_get_ethdev_addr() already checks that (in
fwnode_get_mac_addr()).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the new device_get_ethdev_address() helper for the cases
where dev->dev_addr is passed in directly as the destination.

  @@
  expression dev, np;
  @@
  - device_get_mac_address(np, dev->dev_addr, ETH_ALEN)
  + device_get_ethdev_address(np, dev)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

There is a handful of drivers which pass netdev->dev_addr as
the destination buffer to device_get_mac_address(). Add a helper
which takes a dev pointer instead, so it can call an appropriate
helper.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

All callers pass in ETH_ALEN and the function itself
will return -EINVAL for any other address length.
Just assume it's ETH_ALEN like all other mac address
helpers (nvm, of, platform).
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

fwnode_get_mac_address() and device_get_mac_address()
return a pointer to the buffer that was passed to them
on success or NULL on failure. None of the callers
care about the actual value, only if it's NULL or not.

These semantics differ from of_get_mac_address() which
returns an int so to avoid confusion make the device
helpers return an errno.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the mac address helpers out, eth.c already contains
a bunch of similar helpers.
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the new of_get_ethdev_address() helper for the cases
where dev->dev_addr is passed in directly as the destination.

  @@
  expression dev, np;
  @@
  - of_get_mac_address(np, dev->dev_addr)
  + of_get_ethdev_address(np, dev)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

There are roughly 40 places where netdev->dev_addr is passed
as the destination to a of_get_mac_address() call. Add a helper
which takes a dev pointer instead, so it can call an appropriate
helper.

Note that of_get_mac_address() already assumes the address is
6 bytes long (ETH_ALEN) so use eth_hw_addr_set().
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rob suggests to move of_net.c from under drivers/of/ somewhere
to the networking code.
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rikard Falkeborn says:

====================
nfc: pn533: Constify ops-structs

Constify a couple of ops-structs. This allows the compiler to put the
static structs in read-only memory.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Neither the driver or the core modifies the pn533_phy_ops struct, so
make them const to allow the compiler to put the static structs in
read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The only usage of pn532_serdev_ops is to pass its address to
serdev_device_set_client_ops(), which takes a pointer to const
serdev_device_ops as argument. Make it const to allow the compiler to
put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2021-10-07

1) Fix a sysbot reported shift-out-of-bounds in xfrm_get_default.
   From Pavel Skripkin.

2) Fix XFRM_MSG_MAPPING ABI breakage. The new XFRM_MSG_MAPPING
   messages were accidentally not paced at the end.
   Fix by Eugene Syromiatnikov.

3) Fix the uapi for the default policy, use explicit field and macros
   and make it accessible to userland.
   From Nicolas Dichtel.

4) Fix a missing rcu lock in xfrm_notify_userpolicy().
   From Nicolas Dichtel.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

queue

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-10-06

This series contains updates to i40e and iavf drivers.

Jiri Benc expands an error check to prevent infinite loop for i40e.

Sylwester prevents freeing of uninitialized IRQ vector to resolve a
kernel oops for i40e.

Stefan Assmann fixes a double mutex unlock for iavf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull devicetree fixes from Rob Herring:

 - Add another allowed address for TI sn65dsi86

 - Drop more redundant minItems/maxItems

 - Fix more graph 'unevaluatedProperties' warnings in media bindings

* tag 'devicetree-fixes-for-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: drm/bridge: ti-sn65dsi86: Fix reg value
  dt-bindings: Drop more redundant 'maxItems/minItems'
  dt-bindings: media: Fix more graph 'unevaluatedProperties' related warnings

Russell King says:

====================
Add mdiobus_modify_changed() helper

Sean Anderson's recent patch series is introducing more read-write
operations on the MDIO bus that only need to happen if a change is
being made.

We have similar logic in __mdiobus_modify_changed(), but we didn't
add its correponding locked variant mdiobus_modify_changed() as we
had very few users. Now that we are getting more, let's add the
helper.
====================

Link: https://lore.kernel.org/r/YV2UIa2eU+UjmWaE@shell.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Use the mdiobus_modify_changed() helper in the C22 PCS advertisement
helper.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Add mdiobus_modify_changed() helper to reflect the phylib and similar
equivalents. This will avoid this functionality being open-coded, as
has already happened in phylink, and it looks like other users will be
appearing soon.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ido Schimmel says:

====================
ethtool: Add ability to control transceiver modules' power mode

This patchset extends the ethtool netlink API to allow user space to
control transceiver modules. Two specific APIs are added, but the plan
is to extend the interface with more APIs in the future (see "Future
plans").

This submission is a complete rework of a previous submission [1] that
tried to achieve the same goal by allowing user space to write to the
EEPROMs of these modules. It was rejected as it could have enabled user
space binary blob drivers.

However, the main issue is that by directly writing to some pages of
these EEPROMs, we are interfering with the entity that is controlling
the modules (kernel / device firmware). In addition, some functionality
cannot be implemented solely by writing to the EEPROM, as it requires
the assertion / de-assertion of hardware signals (e.g., "ResetL" pin in
SFF-8636).

Motivation
==========

The kernel can currently dump the contents of module EEPROMs to user
space via the ethtool legacy ioctl API or the new netlink API. These
dumps can then be parsed by ethtool(8) according to the specification
that defines the memory map of the EEPROM. For example, SFF-8636 [2] for
QSFP and CMIS [3] for QSFP-DD.

In addition to read-only elements, these specifications also define
writeable elements that can be used to control the behavior of the
module. For example, controlling whether the module is put in low or
high power mode to limit its power consumption.

The CMIS specification even defines a message exchange mechanism (CDB,
Command Data Block) on top of the module's memory map. This allows the
host to send various commands to the module. For example, to update its
firmware.

Implementation
==============

The ethtool netlink API is extended with two new messages,
'ETHTOOL_MSG_MODULE_SET' and 'ETHTOOL_MSG_MODULE_GET', that allow user
space to set and get transceiver module parameters. Specifically, the
'ETHTOOL_A_MODULE_POWER_MODE_POLICY' attribute allows user space to
control the power mode policy of the module in order to limit its power
consumption. See detailed description in patch #1.

The user API is designed to be generic enough so that it could be used
for modules with different memory maps (e.g., SFF-8636, CMIS).

The only implementation of the device driver API in this series is for a
MAC driver (mlxsw) where the module is controlled by the device's
firmware, but it is designed to be generic enough so that it could also
be used by implementations where the module is controlled by the kernel.

Testing and introspection
=========================

See detailed description in patches #1 and #5.

Patchset overview
=================

Patch #1 adds the initial infrastructure in ethtool along with the
ability to control transceiver modules' power mode.

Patches #2-#3 add required device registers in mlxsw.

Patch #4 implements in mlxsw the ethtool operations added in patch #1.

Patch #5 adds extended link states in order to allow user space to
troubleshoot link down issues related to transceiver modules.

Patch #6 adds support for these extended states in mlxsw.

Future plans
============

* Extend 'ETHTOOL_MSG_MODULE_SET' to control Tx output among other
attributes.

* Add new ethtool message(s) to update firmware on transceiver modules.

* Extend ethtool(8) to parse more diagnostic information from CMIS
modules. No kernel changes required.

[1] https://lore.kernel.org/netdev/20210623075925.2610908-1-idosch@idosch.org/
[2] https://members.snia.org/document/dl/26418
[3] http://www.qsfp-dd.com/wp-content/uploads/2021/05/CMIS5p0.pdf

Previous versions:
[4] https://lore.kernel.org/netdev/20211003073219.1631064-1-idosch@idosch.org/
[5] https://lore.kernel.org/netdev/20210824130344.1828076-1-idosch@idosch.org/
[6] https://lore.kernel.org/netdev/20210818155202.1278177-1-idosch@idosch.org/
[7] https://lore.kernel.org/netdev/20210809102152.719961-1-idosch@idosch.org/
====================

Link: https://lore.kernel.org/r/20211006104647.2357115-1-idosch@idosch.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add support for the transceiver module extended state and sub-state
added in previous patch. The extended state is meant to describe link
issues related to transceiver modules.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>