- 25 Jan, 2019 9 commits
-
-
Heiner Kallweit authored
The state machine is a no-op before phy_start() has been called. Therefore let's enable it in phy_start() only. In phy_start() let's call phy_start_machine() instead of phy_trigger_machine(). phy_start_machine is an alias for phy_trigger_machine but it makes clearer that we start the state machine here instead of just triggering a run. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
In case of error, the function devm_clk_get() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: a7c30e62 ("net: stmmac: Add driver for Qualcomm ethqos") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Colin Ian King authored
Two statements are incorrecly indented, fix these by removing a space. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Claudiu Manoil says: ==================== Introduce ENETC ethernet drivers ENETC is a multi-port virtualized Ethernet controller supporting GbE designs and Time-Sensitive Networking (TSN) functionality. ENETC is operating as an SR-IOV multi-PF capable Root Complex Integrated Endpoint (RCIE). As such, it contains multiple physical (PF) and virtual (VF) PCIe functions, discoverable by standard PCI Express. The patch series adds basic enablement for these otherwise standard buffer descriptor (BD) ring based ethernet devices (PCIe PFs and VFs), currently included in the 64-bit dual ARMv8 processors LS1028A SoC. The driver is portable to 32-bit designs, and it's independent of CPU endianness. Contributors: Alex Marginean <alexandru.marginean@nxp.com> Catalin Horghidan <catalin.horghidan@nxp.com> TODO list: * IEEE 1588 PTP support; * TSN support; * MDIO support and VF link management; * power management support; * flow control support; * TC offloading with h/w MQPRIO; * interrupt coalescing, configurable BD ring sizes, and other usual config options if missing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Claudiu Manoil authored
A ternary match table is used for RFS. If multiple entries in the table match, the entry with the lowest numerical values index is chosen as the matching entry. Entries in the table are identified using an index which takes a value from 0 to PRFSCAPR[NUM_RFS]-1 when accessed by the PSI (PF). Portions of the RFS table can be assigned to each SI by the PSI (PF) driver in PSIaRFSCFGR. Assignments are cumulative, the entries assigned to SIn start after those assigned to SIn-1. The total assignments to all SIs must be equal to or less than the number available to the port as found in PRFSCAPR. For RSS, the Toeplitz hash function used requires two inputs, a 40B random secret key that is supplied through the PRSSKR0-9 registers as well as the relevant pieces of the packet header (n-tuple). The 6 LSB bits of the hash function result will then be used as a pointer to obtain the tag referenced in the 64 entry indirection table. The result will provide a winning group which will be used to help route the received packet. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Claudiu Manoil authored
VSIs (VFs) may send a message to the PSI (PF) for general notification or to gain access to hardware resources which requires host inspection. These messages may vary in size and are handled as a partition copy between two memory regions owned by the respective participants. The PSI will respond with fail or success and a 16-bit message code. The patch implements the vf to pf messaging mechanism above and, as the first application making use of this support, it enables the VF to configure its own primary MAC address. Signed-off-by: Catalin Horghidan <catalin.horghidan@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Claudiu Manoil authored
This adds most h/w statistics counters: non-privileged SI conters, as well as privileged Port and MAC counters available only to the PF. Per ring software stats are also included. Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Claudiu Manoil authored
ENETC is a multi-port virtualized Ethernet controller supporting GbE designs and Time-Sensitive Networking (TSN) functionality. ENETC is operating as an SR-IOV multi-PF capable Root Complex Integrated Endpoint (RCIE). As such, it contains multiple physical (PF) and virtual (VF) PCIe functions, discoverable by standard PCI Express. Introduce basic PF and VF ENETC ethernet drivers. The PF has access to the ENETC Port registers and resources and makes the required privileged configurations for the underlying VF devices. Common functionality is controlled through so called System Interface (SI) register blocks, PFs and VFs own a SI each. Though SI register blocks are almost identical, there are a few privileged SI level controls that are accessible only to PFs, and so the distinction is made between PF SIs (PSI) and VF SIs (VSI). As such, the bulk of the code, including datapath processing, basic h/w offload support and generic pci related configuration, is shared between the 2 drivers and is factored out in common source files (i.e. enetc.c). Major functionalities included (for both drivers): MSI-X support for Rx and Tx processing, assignment of Rx/Tx BD ring pairs to MSI-X entries, multi-queue support, Rx S/G (Rx frame fragmentation) and jumbo frame (up to 9600B) support, Rx paged allocation and reuse, Tx S/G support (NETIF_F_SG), Rx and Tx checksum offload, PF MAC filtering and initial control ring support, VLAN extraction/ insertion, PF Rx VLAN CTAG filtering, VF mac address config support, VF VLAN isolation support, etc. Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Tariq Toukan authored
Soften the memory barrier call of mb() by a sufficient wmb() in the consumer index update of the event queues. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Jan, 2019 31 commits
-
-
Heiner Kallweit authored
So far member rtl_fw has three states: - IS_ERR(rtl_fw): firmware not loaded - !rtl_fw: no firmware available - other: firmware loaded This can be made simpler and clearer by adding the firmware name as member fw_name to struct rtl8169_private. Then: - !fw_name: no firmware available - !rtl_fw: firmware not loaded - rtl_fw: firmware loaded This change also allows to easily merge rtl_request_uncached_firmware into rtl_request_firmware. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Huazhong Tan says: ==================== code optimizations & bugfixes for HNS3 driver This patchset includes bugfixes and code optimizations for the HNS3 ethernet controller driver Change log: V1->V2: fixes comment from Eric Dumazet ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
The PFC enabling is based on user priority, currently it is based on TC, which may cause PFC not setting correctly when pri to TC mapping is not one to one relation. This patch adds pfc_en in tm_info to fix it. Fixes: cacde272 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
liuzhongzhu authored
In the old firmware version, statistics acquisition of PFC frames and MAC control frames is not supported. Add command retrieves statistics for PFC frames and MAC control frames from the firmware. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
This patch sets the TC weight in SSU module according to info in tm_info. Also, zero weight of TC weight in SSU ETS module means enabling strict priority, so do not allow zero weight when in ETS mode. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
GE MAC does not support PFC, when driver is initializing and MAC is in GE Mode, ignore the fw not supported error, otherwise initialization will fail. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
According to firmware error code definition, the error code of 2 means NOT_SUPPORTED, this patch changes it to NOT_SUPPORTED. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peng Li authored
Param pending_buf and skb may be not NULL when free ring. This patch clears them when free ring. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Huazhong Tan authored
The current code returns the number of all queues that can be used and the number of queues that have been allocated, which is incorrect. What should be returned is the number of queues allocated for each enabled TC and the number of queues that can be allocated. This patch fixes it. Fixes: 849e4607 ("net: hns3: add ethtool_ops.get_channels support for VF") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
Shaper setting does not change currently, when TC num changes, which may cause shaper parameter not setting problem. This patch fixes it by setting the shaper parameter when TC num changes. Fixes: cacde272 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Yunsheng Lin authored
Currently rss configuration set by user will be lost when setting channel. This patch fixes it by not setting rss configuration to default if user has configured the rss. Fixes: 09f2af64 ("net: hns3: add support to modify tqps number") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
In origin codes, there are some statistics item are got from mac, which also include the packets statistics of VF. It is unreasonable. This patch fixes it by counting them in the rx/tx processing flow. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jian Shen authored
This patch adds rx multicast packets statistic for each ring. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Peng Li authored
This patch adds calling roce callback function when link status change. Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Add VXLAN support for Spectrum-2 This patchset adds support for VXLAN tunneling on the Spectrum-2 ASIC. Spectrum-1 and Spectrum-2 are largely backward compatible in this area, so not too many changes are required. Patches #1-#2 expose a function and perform small refactoring towards the actual Spectrum-2 implementation in patches #3-#4. Patch #3 adds the required initialization steps on Spectrum-2. Patch #4 finally enables VXLAN on Spectrum-2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Enable VXLAN on Spectrum-2 as previous patches added the required functionality. Note that for now Spectrum-1 and Spectrum-2 use the same function to determine whether the VXLAN configuration is valid or not. In the future, when the driver will be extended to support features not present in Spectrum-1, two different functions will be needed. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Spectrum-1 and Spectrum-2 are largely backward compatible with regards to VXLAN. One difference - as explained in previous patch - is that an underlay RIF needs to be specified instead of an underlay VR during NVE initialization. This is accomplished by calling the relevant function that returns the index of such a RIF based on the table ID (RT_TABLE_MAIN) where underlay look up occurs. The second difference is that VXLAN learning (snooping) is controlled via a different register (TNPC). Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
The configuration of a VXLAN tunnel in Spectrum-1 and Spectrum-2 is largely the same. To avoid code duplication, breakout the common parts to a common function that can be invoked from the ASIC-specific code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
In Spectrum-2, instead of providing the ID of the virtual router (VR) where NVE underlay lookups will occur as in Spectrum-1, the ID of a router interface (RIF) in this VR is required. Expose functions to create and destroy such a RIF. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/mellanox/mlx4/eq.c: In function ‘mlx4_eq_int’: drivers/net/ethernet/mellanox/mlx4/mlx4.h:219:5: warning: this statement may fall through [-Wimplicit-fallthrough=] if (mlx4_debug_level) \ ^ drivers/net/ethernet/mellanox/mlx4/eq.c:558:4: note: in expansion of macro ‘mlx4_dbg’ mlx4_dbg(dev, "%s: MLX4_EVENT_TYPE_SRQ_LIMIT. srq_no=0x%x, eq 0x%x\n", ^~~~~~~~ drivers/net/ethernet/mellanox/mlx4/eq.c:561:3: note: here case MLX4_EVENT_TYPE_SRQ_CATAS_ERROR: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/net/ethernet/qlogic/qed/qed_cxt.c:2126:4: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/net/ethernet/brocade/bna/bfa_ioc.c:790:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/brocade/bna/bfa_ioc.c:860:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c:6336:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2231:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/broadcom/tg3.c:722:6: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/broadcom/tg3.c:783:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/net/ethernet/3com/3c509.c:1265:8: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/net/ethernet/3com/3c509.c:1271:8: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: net/tipc/link.c:1125:6: warning: this statement may fall through [-Wimplicit-fallthrough=] net/tipc/socket.c:736:6: warning: this statement may fall through [-Wimplicit-fallthrough=] net/tipc/socket.c:2418:7: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sudarsana Reddy Kalluru authored
Recently, there were bunch of fixes to bnx2x driver, the code is now aligned to out-of-box driver version 1.713.36. This patch updates bnx2x driver version to 1.713.36. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nathan Chancellor authored
When building this code on a 32-bit platform such as ARM, there is a link time error (lld error shown, happpens with ld.bfd too): ld.lld: error: undefined symbol: __aeabi_uldivmod >>> referenced by devlink.c >>> net/core/devlink.o:(devlink_health_buffers_create) in archive built-in.a This happens when using a regular division symbol with a u64 dividend. Use DIV_ROUND_UP_ULL, which wraps do_div, to avoid this situation. Fixes: cb5ccfbe ("devlink: Add health buffer support") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
Some of the PHY and MDIO drivers refer to the COPYING file in the main directory of this archive. This is the main license for Linux, thus GPLv2 plus syscall extension. Fixup the MODULE_LICENSE() where needed and add an SDPX header for GPLv2. Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
A few PHY drivers have the GPLv2 license text. They then either have a MODULE_LICENSE() of GPLv2+, or an SPDX tag of GPLv2+. Since the license text is much easier to understand than either the SPDX tag or the MODULE_LICENSE, use it as the definitive source of the licence, and fixup with others when there are contradictions. Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Laurent Pinchart <laurentp@cse-semaphore.com> Cc: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Cc: Scott Wood <scottwood@freescale.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Andrew F. Davis <afd@ti.com> Acked-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andrew Lunn says: ==================== SPDX tags for PHY and MDIO drivers This patchset adds SPDX tags to files where the license information is clear and consistent. It also removes redundent license text when an SPDX header is present. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andrew Lunn authored
The SPDX header makes any license text redundent. Remove it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-