1. 03 Oct, 2014 7 commits
  2. 02 Oct, 2014 1 commit
  3. 29 Sep, 2014 3 commits
  4. 24 Sep, 2014 7 commits
  5. 23 Sep, 2014 3 commits
    • Stephen Boyd's avatar
      mmc: Consolidate emmc tuning blocks · 48d11e06
      Stephen Boyd authored
      The same tuning block exists in the dw_mmc h.c and sdhci-msm.c
      files. Move these into mmc.c so that they can be shared across
      drivers.
      Reported-by: default avatarJaehoon Chung <jh80.chung@samsung.com>
      Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      48d11e06
    • Stephen Boyd's avatar
      mmc: sdhci-msm: Make tuning block table endian agnostic · ffed1b94
      Stephen Boyd authored
      If we're tuning on a big-endian CPU we'll never determine we properly
      tuned the device because we compare the data we received from the
      controller with a table that assumes the CPU is little-endian.
      Change the table to be an array of bytes instead of 32-bit words
      so we can use memcmp() without needing to byte-swap every word
      depending on the endianess of the CPU.
      
      Cc: Asutosh Das <asutoshd@codeaurora.org>
      Cc: Venkat Gopalakrishnan <venkatg@codeaurora.org>
      Reviewed-by: default avatarGeorgi Djakov <gdjakov@mm-sol.com>
      Fixes: 415b5a75 "mmc: sdhci-msm: Add platform_execute_tuning implementation"
      Signed-off-by: default avatarStephen Boyd <sboyd@codeaurora.org>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      ffed1b94
    • Stephen Warren's avatar
      mmc: don't request CD IRQ until mmc_start_host() · d4d11449
      Stephen Warren authored
      As soon as the CD IRQ is requested, it can trigger, since it's an
      externally controlled event. If it does, delayed_work host->detect will
      be scheduled.
      
      Many host controller probe()s are roughly structured as:
      
      *_probe() {
          host = sdhci_pltfm_init();
          mmc_of_parse(host->mmc);
          rc = sdhci_add_host(host);
          if (rc) {
              sdhci_pltfm_free();
              return rc;
          }
      
      In 3.17, CD IRQs can are enabled quite early via *_probe() ->
      mmc_of_parse() -> mmc_gpio_request_cd() -> mmc_gpiod_request_cd_irq().
      
      Note that in linux-next, mmc_of_parse() calls mmc_gpio*d*_request_cd()
      rather than mmc_gpio_request_cd(), and mmc_gpio*d*_request_cd() doesn't
      call mmc_gpiod_request_cd_irq(). However, this issue still exists if
      mmc_gpio_request_cd() is called directly before mmc_start_host().
      
      sdhci_add_host() may fail part way through (e.g. due to deferred
      probe for a vmmc regulator), and sdhci_pltfm_free() does nothing to
      unrequest the CD IRQ nor cancel the delayed_work. sdhci_pltfm_free() is
      coded to assume that if sdhci_add_host() failed, then the delayed_work
      cannot (or should not) have been triggered.
      
      This can lead to the following with CONFIG_DEBUG_OBJECTS_* enabled, when
      kfree(host) is eventually called inside sdhci_pltfm_free():
      
      WARNING: CPU: 2 PID: 6 at lib/debugobjects.c:263 debug_print_object+0x8c/0xb4()
      ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x18
      
      The object being complained about is host->detect.
      
      There's no need to request the CD IRQ so early; mmc_start_host() already
      requests it. For most SDHCI hosts at least, the typical call path that
      does this is: *_probe() -> sdhci_add_host() -> mmc_add_host() ->
      mmc_start_host(). Therefore, remove the call to mmc_gpiod_request_cd_irq()
      from mmc_gpio_request_cd(). This also matches mmc_gpio*d*_request_cd(),
      which already doesn't call mmc_gpiod_request_cd_irq().
      
      However, some host controller drivers call mmc_gpio_request_cd() after
      mmc_start_host() has already been called, and assume that this will also
      call mmc_gpiod_request_cd_irq(). Update those drivers to explicitly call
      mmc_gpiod_request_cd_irq() themselves. Ideally, these drivers should be
      modified to move their call to mmc_gpio_request_cd() before their call
      to mmc_add_host(). However that's too large a change for stable.
      
      This solves the problem (eliminates the kernel error message above),
      since it guarantees that the IRQ can't trigger before mmc_start_host()
      is called.
      
      The critical point here is that once sdhci_add_host() calls
      mmc_add_host() -> mmc_start_host(), sdhci_add_host() is coded not to
      fail. In other words, if there's a chance that mmc_start_host() may have
      been called, and CD IRQs triggered, and the delayed_work scheduled,
      sdhci_add_host() won't fail, and so cleanup is no longer via
      sdhci_pltfm_free() (which doesn't free the IRQ or cancel the work queue)
      but instead must be via sdhci_remove_host(), which calls mmc_remove_host()
      -> mmc_stop_host(), which does free the IRQ and cancel the work queue.
      
      CC: Russell King <linux@arm.linux.org.uk>
      Cc: Adrian Hunter <adrian.hunter@intel.com>
      Cc: Alexandre Courbot <acourbot@nvidia.com>
      Cc: Linus Walleij <linus.walleij@linaro.org>
      Signed-off-by: default avatarStephen Warren <swarren@nvidia.com>
      Acked-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
      Cc: <stable@vger.kernel.org> # v3.15+
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      d4d11449
  6. 19 Sep, 2014 2 commits
  7. 18 Sep, 2014 5 commits
  8. 10 Sep, 2014 3 commits
  9. 09 Sep, 2014 9 commits