Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The below checkpatch warnings was fixed,

-WARNING: Prefer pr_err(... to printk(KERN_ERR, ...

and added pr_fmt.
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The below checkpatch error was fixed.

-ERROR: trailing whitespace
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There isn't much reason to use custom workqueue in nvec.  It can use
system_nrt_wq instead and cancel the two work items on removal.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

With the removal of board files on the tegra arch, drivers can now only
be instantiated via device tree. Consequently, all MACH_<board> config
variables are removed. As a temporary solution always enable building
for the (up to now) only supported paz00 board until nvec is full ported
to device tree.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We forgot to release the sync write lock in case the async write
fails. Found by rpiloose on IRC.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 30b68231 "ARM: tegra: clock: add i2c fast clock entry in clock table"
added a new clock for the i2c controllers, so clock requests are no longer
conclusive. Fix this by specifying "div-clk" explicitly.
Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using is_broadcast_ether_addr() instead of directly use
memcmp() to determine if the ethernet address is broadcast
address.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Correct spelling typo in staging/wlags49_h2
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

the opening brace of the if statement should be beside to it, not below to it.
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

this patch removes the return statement at the end of all void functions,
since the function returning void no need to have a return at the end of the
function.
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

the following fix is done in the wl_wds_netif_carrier_off function:

wl_netdev.c:1764: ERROR: space prohibited after that open parenthesis '('
wl_netdev.c:1764: ERROR: space prohibited before that close parenthesis ')'
wl_netdev.c:1768: ERROR: space prohibited after that open parenthesis '('
wl_netdev.c:1768: ERROR: space prohibited before that close parenthesis ')'
wl_netdev.c:1768: ERROR: space required before the open parenthesis '('
wl_netdev.c:1769: ERROR: space prohibited after that open parenthesis '('
wl_netdev.c:1769: ERROR: space prohibited before that close parenthesis ')'
wl_netdev.c:1769: ERROR: space required before the open parenthesis '('
wl_netdev.c:1770: ERROR: space prohibited after that open parenthesis '('
wl_netdev.c:1770: ERROR: space prohibited before that close parenthesis ')'
wl_netdev.c:1770: ERROR: space required before the open parenthesis '('
wl_netdev.c:1771: ERROR: space prohibited after that open parenthesis '('
wl_netdev.c:1771: ERROR: space prohibited before that close parenthesis ')'
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

whitespaces at beginning of the line are removed and are replaced
with the tabs
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

the return is at the end of void function, which is not needed as this
function returns void.
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

no braces needed for single statement if block
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove pointless conditional before kfree_skb().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Rupesh Gujare <rgujare@ozmodevices.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix spelling typo in staging/ozwpan
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

- Add simple suspend/resume PM callbacks to disable oled display on
  suspend and return to previous state on resume
Signed-off-by: Jonathan Brett <jonbrett.dev@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch warnings.
-WARNING: braces {} are not necessary for single statement blocks
-WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch warnings.
-WARNING: braces {} are not necessary for single statement blocks
-WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fixed below checkpatch warnings.
-WARNING: braces {} are not necessary for single statement blocks
-WARNING: braces {} are not necessary for any arm of this statement
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As noted by David Binderman

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=46581Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

If rotated 90 or 270, we need to invert the dimensions used by drm
core for calculating if the dimensions of an attached fb are correct.
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This is an equivalent conversion and will ease scheduled removal of
WQ_NON_REENTRANT.

Only compile tested.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds fail checks for kmalloc and kzalloc calls
and also adds a error path that frees allocated pages by
introducing a call to _drm_gem_put_pages.
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Rob Clark <rob@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Second set of IIO rework and new drivers for the 3.7 cycle.

Firstly we have the second half of a series reworking support for
the various sigma delta ADCs from Analog.  The first half was fixes
that have already merged in the v3.6 cycle.  Other than some
little cleanups this mainly consists of a unifying library module
that the various drivers can then use.  Another new driver is
using this undergoing revisions and the code reduction already
seen from this is considerable.  A nice piece of work.

Secondly we have a good number of tidying up patches from various
sources doing things like adding include guards and removing
unintended header ordering requirements.  Also a mass annotation
of missing __devinit/exit.  Peter Meerwald has been getting around
with cleanup of lis3l02dq, documentation fixes, white space clenaups
and a small issue with my spelling ;)

Thirdly we have some improvements to our kfifo usage that have
been around for a while but are now suddenly in demand from a
number of users.

Forth we have some clk_prepare_enable and clk_prepare_disable
cleanups.

Fifth is the addition of i2c dacs to the ad5446 driver

Finally we have some email address updates. I'll do the
MAINTAINERS one separately.

So a general mixed bag but nothing terribly controversial
or 'exciting'.

The `IS_ENABLED(CONFIG_COMEDI_DAS08_ISA)` and
`IS_ENABLED(CONFIG_COMEDI_DAS08_PCI)` macro calls are a bit long-winded.
Define a couple of macros `DO_ISA` and `DO_PCI` as abbreviations for
them.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add inline helper function `is_isa_board(board)` to check if the driver
supports ISA boards and this is an ISA board, and `is_pci_board(board)`
to check if the driver supports PCI boards and this is a PCI board.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Don't bother reporting the I/O base address for PCI devices as it's not
very interesting.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Absorb `das08_pci_attach_common()` into `das08_attach_pci()` since
that's the only place it was called from.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the code that allows PCI boards to be manually attached by the
`COMEDI_DEVCONFIG` ioctl (or the `comedi_config` application).
Supported PCI boards will be attached automatically at probe time via
`comedi_pci_auto_config()` and the `attach_pci` hook in the `struct
comedi_driver`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Stash the last value written to each AO channel in private data and
support the INSN_READ instruction to read it back.  Don't bother setting
the SDF_READABLE subdevice flag though as the hardware isn't really
readable - we're just faking it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Initialize the AO subdevice channels to mid-range data value so they are
in a known state.  This allows us to support reading back the current
value in a later patch.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Combine the AO write functions for 'JR' boards and other boards into a
single function and factor out the data writing from the comedi
instruction handling so it can be called from elsewhere in a later
patch.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `das08jr_di_rbits()`, `das08jr_do_wbits()`, `das08jr_ao_winsn()` and
`das08ao_ao_winsn()` static functions are currently marked as
`__maybe_unused` as they were formerly only referred to by possibly
conditionally compiled out code.  This is no longer the case (they are
referred to by `das08_common_attach()`) so their `__maybe_unused` tags
can be removed.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no need to check the value of `insn->n` is correct in
`das08_counter_config()` as the core comedi module will have already
checked it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The I/O port base address for the counter subdevice doesn't need to be
stored in the private data.  It can be calculated on the fly using the
offset in the static board data.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>